Change Management Document not visable in Change Management Workcenter

I am configuring CHARM in my sandbox Solution Manager EHP1 system. I have created a Change Request and assigned it to a Maintenance Cycle. The request has status Authorized and the associated Change Document (Correction) has been created. I have entered the Business Partner number for the Developer in the Current Processor field of the Change Document. When I log on as the Developer, I can see the Change Document when going through CRM_DNO_MONITOR, but the Change Document does not appear on the Change Management tab when I navigate to the Change Management Workcenter. The same problem appears when I assign the current processor to another role such as a Tester.
I have the following roles assigned.
Developer:
SAP_CM_DEVELOPER_COMP
SAP_CM_SMAN_DEVELOPER
SAP_SMWORK_BASIC
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Tester:
SAP_CM_SMAN_TESTER
SAP_CM_TESTER_COMP
SAP_SMWORK_BASIC
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_TESTER
Does anyone have any idea what the problem may be?

Thanks Xavier. Yes, adding SAP_ALL / SAP_NEW enabled the change document to appear in the workcenter.
I was able to track down the authorization to authorization Object CRM Order - Business Transaction Type (CRM_ORD_PR-PR_TYPE). Just needed to add the Transaction Type for the Change Document and that did the trick.
Thanks for pointing me in the right direction.
Regards,
Joe

Similar Messages

Adobe Acrobat 7: Can not insert pages, changing the document: Not Allowed, but Security Method set t

In Adobe 7, I need to add some pdf pages to the end of a document, but the insert pages (as well as all other items under Document> are greyed out.
On the document properties\ Security> the document restrictions summary says "Changing the Document: Not Allowed", but the Security Method in the drop down above is set to "No Security"
Thanks!

If there are form fields, then whoever added them probably used the forms menu, not the Acrobat form fields. Thus the PDF was converted to Designer and you are out of luck. The FORMS button found in various places in Acrobat 7 and latter takes you to Designer, not the Acrobat form tools. The latter are located in the tools menu.

Manager is not able to change attribute

Hello SRM Guru,
As per my knowledge Managers can change the attributes defined for their organizational unit(s) or for users in their organizational unit(s) using the Web application Changing Attributes BBPATTRMAINT. In my case manager is only able to only change attributes defined for their organizational unit(s) not for the users in the organizational unit(s).
Could you please suggest what could be the setting I am missing? I have also tried with standrad manager and administrator role.
Thanks,
Jack

Jack
It seems that you are trying to change the attribute value which is inherited.
If the user attributes are inherited from the parent org unit level, then you cannot change them at user level. You need to go to the parent level where attributes are set and change there. This will affect to all levels down the line wherever inherited. Be careful while doing this.
If you do not want those attributes to get inherited down the line then remove the value at parent level. Then you can add new value to that attribute at the user level.
Regards
Jagdish

Changing The Document: Not Allowed

Hi,
Kindly refer to this link - https://forums.adobe.com/thread/1565222 regarding with our issue on PDF files created using Acrobat Pro 7. When we open the files using higher versions the Changing the Documents and Document Assembly always marked as Not Allowed.
Thanks

Attention: Acrobat Product EXPERT (Adobe Support HelpDesk)
PLEASE Reply

Documents not sending saved changes

I need help! When opening a PDF document in Adobe Reader, I can make changes, save the data and email it to myself. When I open the document in my email, it does not save my changes. Please help,

Tell us more details: operating system, email client, Reader version.
How exactly are you proceeding?
open a PDF from your local disk? With Adobe Reader?
make changes (what changes?), save it back to local disk?
send the changed document via email?
when you receive it, the changes are gone?

InDesign CS3 5.0.4 Changes to documents not being registered properly

My boss has been complaining about a lot of "mistakes" lately and changes not being made, which is odd because I don't generally make a lot of mistakes. So I started paying very close attention and this is what I have discovered:
Sometimes changes that I make to a document will randomly revert. Sometimes changes don't get saved. The problem is random and not reproducible.
For example: I made a change to an item, and then copied and pasted that item onto another page. The change "sticks" in the new location of the item, but the original somehow, at some random future point, reverts to the pre-change state.
Another example: I moved an item on a page, then saved, then printed, then closed the document. In that order. The printout shows the change. When I opened the document again, the item I moved was back where it was before I moved it.
I am not having this problem in any other application. Just InDesign. Can anyone help me? I don't know what to do, but if it keeps happening, it could get me fired.
My computer is a Mac Pro 2.8GHz Quadcore. OS is 10.5.6.
I have, of course, already tried repairing permissions. Thanks for your help.

Hello Michael,
I just posted the exact problem to a new forum today ...changes revert... Have you had any problems since the preferences were trashed...? Do you think the Save As technique will work alone without the trashing of the preferences?
Well, you do have some company in your misery...
as if that is any consolation for being fired. . .
We hope it hasn't grown to that extent.
We do a quarterly magazine (Veritas) ... and this problem has plagues us since we've moved to CS3 years ago and just thought it was operator error. Until we started noticing much of the same proofreading errors version after version.
Let me know how you're progressing, and we'll report back about how we move along as well.
Until that time ... Earl J.
USASOC History Office
Fort Bragg, North Carolina

SOLMAN_DIRECTORY :Mass downloading of documents not possible in solution manager

We have maintained various solutions in solution directory under solution structure in solman 7.10 SP10 .
Tcode to access solution directory: SOLMAN_DIRECTORY
Various test cases and documents are stored under this structure.
We can only download single document at a time but we are unable to download multiple documents present in the documentation tab.
Everytime i try to export multiple documents we get below error 'Select one row' .
Can anyone please suggest a solution since there are lot of documents & downloading single document each time is really frustrating and time consuming.I tried with SAP KW, but its not working.
- Regards
Deepak

Thanks Vinod
I have already tried with SAP KW but its not working unexpectedly. I will follow up with our client for this.
Apart from SAP KW is there any other way by which we can perform mass download of documents in solman ?
-Regards
Deepak

I tried to sign up for a new free account, got message from you. Sent you em address ask what is wrong. Find my em was right. condused. Tried change my profile, but never had a profile, and at that it says to change my password, not want to change it.

Wow, at age 76 I'm suppose to remember all I saw before and give you more details?
I wanted to be able to join the support blog, to be able to ask a question. It all went from there. Somewhere along the line I saw sign up for a new free (support?) account. I did. created a cute name (Marycontrary), put in a password, not likely one to be used by someone else, my em address. Sent. Got a confirmation em from you. I clidked to confirm. I got back from you: It said something wrong (or something like that) I thought maybe I didn't type in the last part of my em address and sent a reply to you to that effect. See above for rest. Hope you can help. I can't stand it when companies want us to change our passwords. I like us to be able to keep our original password, I use different ones for different sites. The best sites give us a chance to retrieve our orignial password by setting up a chance to choosing a question of our choice and registering the answer, then when a problem they as the question and we give the answer and everything goes well. These change you password bits are very very hard on us older people, and there are more and more of us out here on the net now days. Thank you for any help you can give me.'''bold text'''

You are describing the way Skype accounts are set up since the beginning of Skype: No email verification is necessary. That's why we recommend new users to create their Skype accouns using Microsoft account instead which has all these security features.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Setting EX2007 mailbox permissions with Exchange Management Shell not reflected in Exchange Management Console

Hello,
I'm trying to use PowerShell to script some mailbox permissions. The mailbox permissions I set in the shell are not displaying in the EMC. The command I'm using is:
add-MailboxPermission -accessrights fullaccess -identity $username -user MYDOMAIN\$supervisor -confirm:$false
I get confirmation from the shell:
Identity             User                 AccessRights
IsInherited Deny
MyDomain.net/Separa... MYDOMAIN\mysupervisor    {FullAccess}
False       False
Afterwards, when I look in the Exchange Management Console for this user (Right click, Manage Full Access), even after allowing time for replication, I don't see this new permission reflected there. But If I use Get-MailboxPermission
$username, the permissions show up:
Identity             User                 AccessRights
IsInherited Deny
MyDomain.net/Separa... MYDOMAIN\mysupervisor    {FullAccess}
False       False
Why is this addition not being reflected in the shell?

Hi,
The cmdlet you use to grant full access permission is right. If your case, please let "mysupervisor" access to this user's mailbox and verify if he/she can access it. Maybe Exchange Management Console has not been updated well.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Cisco Unified Operation Manager: can not see the Campus manager

Dear all,
I have installed the CUOM to manage my IPT system. I have successfully installed without any errors. The system now can detect all IPT system components but I have a problem. From the Tool on Service Level View, I only the option for Alert History and can not see the option for Campus manager to customize the topology (like the tool on Ciscoworks LMS).
Please give me some advices.
Thank you,
Thanh

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

Workbook with changed query does not display the changes...

Hi,
I have a problem with a workbook with one query in - the query has been changed, but the new added keyfigures are not displayed in the existing WB.
I know from Bex 3.5 there is the option on WB settings "return to global definitions" - I miss this functionality in BI 7.0.
My installed sap gui is version 710
Please let me know where I can switch on this feature...
regards
chris

If you use "Return to Global Definition on refresh" option, all the users would have to have it turned on in their workbooks. In that case won't they lose any settings/navigation the user did, specific to their need. All the workbooks end up being the same in that case.
We are still running on 30B and starting the upgrade to BI70. We just went through training on the new BEx analyzer, and I have to agree with you that some of the useful features of BEx 3X will be missed. Specially in the area of Workbook support, things like Copy query, insert query etc are missing as well.
Thanks
Vineet

PSM-FM-Reversal of funds management document after change in acc.assignment

Good day we recently went live with a component of Funds Management i.e. Availability Control on Cost centers and cost elements. We update BCS with the plan values and actual/commitment items in Finance/CO. We do our planning in CO.
The solution is working reasonably well but we have encountered a problem for which we are unable to find a solution. The problem is best illustrated with an example;
1. Create purchase requisition with Account Assignment Category "K" = Cost Center with transaction ME51N
2. Account assignment = cost center and cost element. A funds management document is created upon saving of the transaction.
3. Purchase Req. is released with a release strategy (transaction ME54N)
4. After purchase requisition release the account assignment for the cost element is changed by the user. This occurs sometimes during the execution of the business process.
5. When a purchase order is created with reference to this purchase requisition with transaction ME59N the system references the original funds management document which means when the account assignment was changed the funds management document was not reversed and a new funds management document created for the changed account assignment.
6. The BUDCON report transaction FMRP_RW_BUDCON thus displays the commitment under the incorrect commitment item as the change in account assignment is not reflected in Funds Management. We have a one to one relationship between cost elements/commitment items and cost centers/funds centers as per the derivation strategy.
My question is;
Is this normal standard SAP standard behavior or are we missing some configuration that will enable the creation of a new funds management document and if so where do we configure such? I must mention our solution is completely SAP standard.
Thank you in advance.
Best Regards
Mike Olwagen
Manager SAP Solution Support
City Power (JHB) (Pty) Ltd

Hi Mike, nice to meet you.
I think u should do an entire test with TRACE on, and u will find the problem, and how to fix it (at FMDERIVE of course).
First: Have a look at note [666322|https://service.sap.com/sap/support/notes/666322], go to FMDERIVE and turn ON the trace.
Then, run all the process ... from ME51N to the end...
I agree with Eli, u must allow overwriting of existing values at FMDERIVE rule...
Regards,
Osvaldo.

Lightroom 2.6 Print Manager Will Not Print

I am running Windows XP, LR 2.6, and printing to a HP z3100 Designjet printer, using HP Print manager.
Problem:
I send a print to the LR Print Manager, then I can watch the print file appear in the the Windows Print Manager screen, then the file just vanishes.
The print never arrives at the printer.
Tests I Successfully Tried - to see if it is either the printer or the HP Print Manager:
I can print the same photo in Photoshop PS4 and it will print; and I can open the Windows Print Manager screen and send a test print to the printer and it works.
> Concluding that it is not the printer, the HP Print Manager, or the Windows Print Manager - and it prints in Photoshop.
So this is strictly a LR 2.6 bugaboo.
Solutions I tried:
Deleted and reinstalled the HP Print Drivers and Print Manager -- did not work.
Changed photos, and sizes, "application managed printing", "printer managed printing" == Nada!
I am out of ideas. This is the first time I've tried to print since I loaded the 2.6 update.
Any solutions???

Well, after updating fingerprint manager pro it is now launching and working flawlessly, not sure why, or what simply updating the software changed in terms of permissions/accessability but it works, so im happy.
Feel kinda silly not doing the obvious first but thank you for the help, much appreciated.

SMS Site Componenet Manager - Componenet Not Installed

Hi,
We're using SCCM 2012 R2 with the databases on a SQL 2012 Failover Cluster (2 nodes). Active node is SQLNode-1. We're getting the following error:
Site Component Manager could not create the Configuration Manager Server Components' installation directory "J:\SMS_SCCMSERVER.domain.com" on site system "\\SQLNode-1" or set the correct permissions on
the directory.
As far as I can tell, we've created the NO_SMS_ON_DRIVE.SMS file on all the drives in both SQL nodes except for the D:\ drive.
On sqlnode-1, I noticed the following registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_SITE_SQL_BACKUP_SCCMSERVER.domain.com\ImagePath has the following value:
J:\SMS_SCCMSERVER.domain.com\bin\x64\smssqlbkup.exe
There's no J:\ drive on sqlnode-1. So I compared the same key in sqlnode-2 (passive node) which has the following value:
D:\SMS_SCCMSERVER.domain.com\bin\x64\smssqlbkup.exe
So I changed the value on sqlnode-1 to be the same as sqlnode-2. Restarted the sms_site_component_manager service but still the same error persists.
I then move the clustered sql instance to sqlnode-2, error still persists. Move it back to sqlnode-1 and error still persists.
Both sql servers have the same value of "sqlnode-0\sccm" in the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Components\SMS_SITE_SQL_BACKUP_SCCMSERVER.domain.com\SQL Server Instance
sqlnode-0 is the cluster name.
In SCCM, sqlnode-1 and sqlnode-2 have the following roles:
component server, site database server and site system
sqlnode-0 has just one role:
site system
How can I correct these errors and get the components installed on the correct D:\ drive on sqlnode-1.
Thanks.

Have you seen http://blogs.technet.com/b/smartinez/archive/2014/06/11/you-implemented-a-sql-cluster-for-sysctr-2012-r2-configmgr-and-you-forgot-what.aspx?
Torsten Meringer | http://www.mssccmfaq.de

How can I digitally sign a pdf document and also disallow changes to the document?

When I digitally sign the document it does not let me lock it down - when I lock down the doc first, it does not allow for digital signature. Please help.

The initial document should have its properties set as:
Changing the Document: Not allowed
Signing: Allowed
That way no one can make changes to it but anyone may sign it. These properties are available in v9, but I'm not sure about previous versions.

Change Management Document not visable in Change Management Workcenter

Similar Messages

Maybe you are looking for