Documents not sending saved changes

I need help! When opening a PDF document in Adobe Reader, I can make changes, save the data and email it to myself. When I open the document in my email, it does not save my changes. Please help,

Tell us more details: operating system, email client, Reader version.
How exactly are you proceeding?
open a PDF from your local disk? With Adobe Reader?
make changes (what changes?), save it back to local disk?
send the changed document via email?
when you receive it, the changes are gone?

Similar Messages

Billing document not getting saved

Hi Gurus,
I am facing a problem with th billing doument. When I try to save the Billing through VF01, it is going to the screen and showing the line items in it. And when we save, it is generating a billing document number.But it is not getting saved.And when go and see in VF02
it is showing a message <b>Express document "Update was terminated" received from Author----
"</b>.
How to resolve this.PLS help me out in this.
Thanks in Advance
Regards
VASU

Hi Vasu
Check whether number range assignment has done. Most probably, you would not have done that.
Incidentally, I had also faced similar problem sometime back and after lot of study, I could come to a conclusion that it is because of non assignment of number range.
Thanks and dont forget to reward if this helps you.
G. Lakshmipathi

PPM Integration Model Activation did not send delta change data

Hi all,
I have an integration model of PPM's. I activated the PPM for the initial transfer.
When I create a new prod. version, I created a new version of the model for PPM, above the previous active one.
When I activated the new version of model, the system tried to send all data.
I supposed that the system would only send the changed data, because the previous model is active.
but the system sent all PPM's
and it takes too long.
Would you please answer why does the system react like that and what must we do?
Mehmet

Hi
In order to check what is occuring, in your ERP system look at Table CIF_PPM_CHANGED, this will tell you the Material, Plant and Prod Vers of your PPM,s. It also has a field CHANGED to tell you if any changes have taken place and a field PROCESS, which should be set to "X" if the change has passed over to APO.
Check the values in your table to see if this has been set. It should only send the delta records where there is a value in CHANGED and PROCESS=" ".
Also check to ensure that people are not changing the Bills of Material or Routings etc, as this will also resend the PPM´s.
Regards
Ian

Change Management Document not visable in Change Management Workcenter

I am configuring CHARM in my sandbox Solution Manager EHP1 system. I have created a Change Request and assigned it to a Maintenance Cycle. The request has status Authorized and the associated Change Document (Correction) has been created. I have entered the Business Partner number for the Developer in the Current Processor field of the Change Document. When I log on as the Developer, I can see the Change Document when going through CRM_DNO_MONITOR, but the Change Document does not appear on the Change Management tab when I navigate to the Change Management Workcenter. The same problem appears when I assign the current processor to another role such as a Tester.
I have the following roles assigned.
Developer:
SAP_CM_DEVELOPER_COMP
SAP_CM_SMAN_DEVELOPER
SAP_SMWORK_BASIC
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Tester:
SAP_CM_SMAN_TESTER
SAP_CM_TESTER_COMP
SAP_SMWORK_BASIC
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_TESTER
Does anyone have any idea what the problem may be?

Thanks Xavier. Yes, adding SAP_ALL / SAP_NEW enabled the change document to appear in the workcenter.
I was able to track down the authorization to authorization Object CRM Order - Business Transaction Type (CRM_ORD_PR-PR_TYPE). Just needed to add the Transaction Type for the Change Document and that did the trick.
Thanks for pointing me in the right direction.
Regards,
Joe

Restoring a document not properly saved?

I exited Word without apparently properly saving a document. I have a Time Capsule, but the document does not seem to be there either. Any techniques for finding a document recently worked on?

Word actually claims it will "AutoSave". So even if the user has not saved, Open Recent should list the file if it had been worked for longer than the setting in Save options.

BPS Documents not storing/saving in Production

We are using the Document functionality in BPS layouts to create and store a Microsoft Word document associated with a particular cell. We have set all the necessary characteristics' document attribute properties, and these have been generated in each of our systems, Development, QA, and Production.
This functionality is working perfectly in our Development and QA environments. However, in Production, the user creates a document, he/she can see the document icon in the Excel-in-Place layout, and saves. When the user comes back into the layout, the icon is missing. The document cannot be seen in the Administrator's Workbench->Documents central administration. In QA and in Development, the documents successfully save, and can be viewed in the Admin. Workbench->Documents.
As far as I can tell, all configuration is the same in all three environments. I've checked the bds service in SICF and it's active across the board. I've checked all that I can in the Document Modelling Workbench, and everything is identical. I even see the table these are stored in (BDSPHIO10), but it's empty in Production, filled with values in QA and Dev.
What am I missing? Why is this not working in Production?
Thanks for any help you can offer.
- John Gooch
214-978-6549
Hunt Consolidated, Inc.
Dallas, TX

Thank you for your suggestion, Marc. I placed the breakpoint as described and then tried to execute the planning folder as before and store a document. When I clicked 'Save', I reached the breakpoint and began stepping through the code. When it called the function module 'SKWF_LOIO_WITH_PHIO_CREATE', the LS_ERROR came back with:
ID =   SKWF_SDOKKERRS
Type = E
No =   030
V1 =   BW_LO_TRAN
I checked the description of the error message in T100, and it looks like the error is:
"Characteristic of class 'BW_LO_TRAN' is not valid."
When it calls function module 'SKWF_PHIO_STORE_CONTENT' next, the error is E001 in the same class: "'&1' does not exist." I'm assuming this is due to the failure of the previous function module call.
Any idea how I can make the "characteristic of class 'BW_LO_TRAN'" valid?
Thanks again, this gives me more information about the potential problem.
- John

Email on Lion not sending, saving in drafts instead?

I am having an interesting problem.
This has happened twice now, where I swear I sent an email, I later find it in my drafts folder, and I'm not sure how it got there. This has never been a problem for me when I used MS Outlook or Gmail online, but for some reason this has now happened twice on Apple's Mail.
I'm just wondering if anyone else is finding this same issue. I'm not sure if my emails had sent the first time, so I just send them again later, but each time this has happened it has gotten me in trouble with work related issues, so it's beggining to really bother me.
Does anyone know how to fix this? Am I really just forgetting to send? I've never ever done that before until I started using just this mail application...

Hmmm, looking at Oranges Mail setup, they say not to use Authentication or SSL...
http://help.orange.co.uk/orangeuk/support/selfservice/forwardrendererurl.jsp?Doc Id=351705
But I'm not sure if that would hold for passing email through to a Mail Server other than Orange.

The document could not be saved. there was a problem reading this document (109)

Have Vista and get this error msg when trying to save Doc as pdf. Document created online as result of survey and opens fine, just cannot save it to a file folder for future access.

If not corrupt, it may be that security is set that does not allow changes. So in that case, adding names and such could not be saved.

Windows 7 (64bit) & Office 2010 (32bit) Excel 'Document not saved' over WAN to network drive

Hi All
We are currently in the process of upgrading all PC's on our WAN to windows 7 across multiple locations
I know this has been asked numerous times but nothing is working for me.
We are experiencing the dreaded 'Document not saved' error at only some locations (5 or 6 out of 200 for all users, these sites generally have slow network connections) when trying to save to a network share back at our HQ. it creates a .tmp file and leaves
the original document intact but without the changes, changing the name of the document in save as doesn't work. saving locally and copying to the share works. We can save locally and to other onsite network shares. It constantly happens so the document can
never be saved to that network share.
Always worked on XP SP3 with Office 2010.
the files in question are around 4mb. smaller excel files with no contenct do work.
I have tried literally everything listed on all forums and nothing seems to resolve it...I've tried
- the hotfix - doesn't apply to my enviroment and the offending KB aren't installed.
- the network resiliency, pivot table network resiliency and Enable simply copy for UNC registry keys
- disabling offline folders, windows search and indexing
- disabling SMB2 on the client
- turning off QOS on the IP4 settings.
- trusted documents.
event log gives
Log Name: OAlerts
Source: Microsoft Office 14 Alerts
Date: 28/03/2014 18:47:23
Event ID: 300
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Description:
Microsoft Excel
Document not saved.
P1: 100490
P2: 14.0.7015.1000
P3: xsmh
P4: 0x80070040
and numerous other things.
My guess is me the issue points to Excel loosing connection to the network share when saving and then the .tmp becoming corrupt.
Does any one have any ideas? Is there a way to sure the connection when saving? is there a way to force it to stay connected?
any help highly appreciated.
Thanks

Hello, We've been having this same issue, and I think we have a work-around.
If we change HKLM\System\CurrentControlSet\services\LanmanWorkstation\Parameters\RequireSecuritySignature from "0" to "1" we still get the error message but the tmp file is NOT created. If the user tries to save again, it is then successful.

Error message says"the document Web could not be saved" help Please

After spending hours on the final tweeking of my iWeb site I go to publish it and get the message the document could not be saved. Is there anyone out there knows how to get this program to save I have tried everything and nothing. And as luck would have it I didn't keep a back copy of what I put into iWeb. Please help
thanks Jeff

Well I encountered the same problem and I had to quit and lose the changes but there is a way to save the information.
What you should do is first back up the domain file.
then before you quit and lose the changes, PRINT the pages as a PDF that way you save the information.
Then I reopened and started to match the pages in iWeb to the PDF's
Though I found out that when I copied some text into a Podcast page filler text from one of the PDF's it caused the same error.
So to get that piece to work, I deleted the text box and retyped that part and Presto!

Error message "the document iweb could not be saved"

Help! I made a few small updates to my already published web site and now when I go to save or publish it I get the message "The document iWeb could not be saved". I have made changes in the past with no issues.... why now and what is the problem?
Thanks

It looks like I'm completely screwed. Why the ****
does iWeb not do incremental backups?
Sounds like something to suggest to Apple. But even if Apple does implement something like this, it doesn't take away the ulitimate responsibility of backing up from the end user. I think Apple has a ways to go in terms of making the Domain file more apparent and visible so that the end user understands that THIS is the file to backup!
Good luck to you!

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

The document could not be saved error when Saving to a SharePoint Document Library

I am having an error when opening and commenting on Adobe PDF's that are stored in SharePoint 2010. When I attempt to save a PDF I have commented on I get the following error:
The Document could not be saved. The server said:
"The operation failed because an unexpected error occurred. (Result code: 0x80020005)"
This seems to happen in a Document Library that is based on a custom template with Managed Metadata columns, when we remove the columns it seems to work and when we create a library with a standard document library template and manually add the manage metadata columns it also works fine.
We would make this change to all document libraries where this issue occurs however this template is applied to 100's of libraries with thousands of documents stored in them. Is there anything we can look at to attempt to resolve this issue?
Word, Excel, PowerPoint, etc. documents seem to work fine in these libraries.

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

Error Message "The document could not be saved. A number is out of range"

Hello to all,
I'm working on a G5/10.4.11/Illust CS3/Acrobat 9 and use to generate .pdfs from .ais by using "Save as pdf" function. Either with LowRes profile and HighRes profile. My pdfs are sent to PC users that use to post it them for changes. But when they need to save them, they get the message "The document could not be saved. A number is out of range".
I know there was a few subject about that but do you have a recent solution to give me to help avoiding this bug ?
Many thanks in advance !
Stekc

As a follow to the above, the problem was related to a file transfer. The PDFs in question were being transfered from a Unix platform to a Windows Server. The transfer was defaulting to ASCII or Text and not binary. Apparently this was never an issue with older versions of Adobe Reader. Once the transfer was switched to binary, Reader X was able to view the files with no missing pages. Something was being stripped from the file that Reader X just didn't like.

Document could not be saved error

Whenever I go back to a PDF that I created or downloaded, and add comments or highlights, and then try to save it, I get an error message saying "The document could not be saved. The file may be read only . . ." But the file is NOT read-only and there are NO security settings. What gives?

I am a heavy user of Adobe Acrobat. Every time we edit a PDF file and click on the save button to save the document it comes up with an error message. I spent hours researching the issue and talked to their tech support people and reluctantly followed their suggestions to the effect of closing the preview pane to no avail. The only I have found that works is to close the Windows Explorer window and then save the document. Even if I move the file selector to a different folder or file it does not work.
This absolutely one of the most ridiculous bugs that Acrobat has ever had and it seems they are putting their heads in the sand and not addressing it. THIS IS ABSOLUTELY UNCONSCIONABLE TO HAVE SUCH A BUG ACROSS SO MANY VERSIONS (v. 9-11) OF A SOFTWARE AND NOT HAVING IT FIXED.
Adobe wants people to close the Windows Explorer every time there is a slight change to a PDF file and for us to reopen it over and over again. This is absolutely ludicrous and absurd.
Arrogance and cockiness of Blackberry people cost them their business, deal with this bug before you become another Blackberry.
Here is the error:

Documents not sending saved changes

Similar Messages

Maybe you are looking for