Change Management - System Recommendations

Hello experts,
I've installed Support Package 27 on SAP Solution Manager 7.0 EhP1. This version provides the function "System Recommendations", it's a part of Change Management. If I choose in System Recommendations the Solution Manager itself, it works fine and shows me all important notes. But if I choose another system, the following message appears:
"Currently no data specific to this technical system has been calculated. You can add it to the automatic check by pressing the Settings link and you can also press the Refresh link for an immediate result."
Pressing the button "Refresh" has only the effect, that the sand clock appears ... nothing else happens
Any idea or a solution for this problem?
Thanks and best regards,
Max Power

In the meantime I found the following error:
A  Error Code TIME_OUT.
A  Module  $Id: //bas/701_REL/src/krn/th/thhiserv.c#7 $ SAP.
A  Function ThTimeout Line 1770.
A  ** RABAX: level LEV_RX_STDERR completed.
A  ** RABAX: level LEV_RX_RFC_ERROR entered.
M  ThCMDEAL (21444871)
M  ThICMDEAL (21444871, ..)
M  ThCPIC: execute cpic func DEALLOCATE
M  DpGetCpicCommIdx: found index 130 via tm_adm
M  found comm entry 130 (tid/uid/mode/conv_id/a_r: 48/10393/0/21444871/0)
M  ThCPIC: last_ftype/last_timeout/last_requested_length/last_receive_data 1/-1/-1/0
M  ThCPIC: allowed rq_type of T48/M0 = TH_APPC_RC_RQ
M  ThConnectToLocGw: connect to local gateway
M  GwConnectSapWp: connect to gateway >localhost< >sapgw01<
M  NiHsLGetNodeAddr: found hostname 'localhost' in cache
M  NiIGetNodeAddr: hostname 'localhost' = addr 127.0.0.1
M  NiHsLGetServNo: got service name 'sapgw01' from operating system
M  NiIGetServNo: servicename 'sapgw01' = port 0C.E5/3301
M  NiICreateHandle: hdl 5 state NI_INITIAL
M  NiIInitSocket: set default settings for new hdl 5 / sock 15 (UD; ST)
M  NiIBlockMode: set blockmode for hdl 5 FALSE
M  NiIConnectSocket: connection of hdl 5 established to /tmp/.sapstream3301
M  NiIConnect: state of hdl 5 NI_CONNECTED
M  NiIWrite: hdl 5 sent data (wrt=136,pac=1,MESG_IO)
M  NiIRead: hdl 5 recv would block (errno=EAGAIN)
M  NiIRead: hdl 5 received data (rcd=136,pac=2,MESG_IO)
M  GwConnectSapWp: connect to gateway localhost / sapgw01 (pid = 2490522) o.k.
M  ThISend: (tm/user/type/info = 48/<username> /0x80/0x0, mode_deleted=0)
M    GATEWAY
M  abap strategy ROLL / O.K.
M  ThRqOutCheck: o.k.
M  ThNewWpStat (type=0x80, task_switch=0, inline_hold=0, hand_shake=0, debug=0, ..)
M  ThNewWpStat: new state of T48/M0 = 0x24
M  ThISend: new wp stat: 0x0
M  Adresse   Offset  APPC-Data to Gateway
M
M  0x70000002096e8c0  000000  060b0200 28990021 00000000 00000000  ....(..!........
M  0x70000002096e8d0  000016  00ffffff ff000000 00000000 00000000  ................
M  0x70000002096e8e0  000032  00000000 00000000 32313434 34383731  ........21444871
M  0x70000002096e8f0  000048  00000000 00000000 00000000 00000000  ................
M  0x70000002096e900  000064  00000000 00000000 00000000 00820136  ...............6
M
M  ThDtAppcBlk: detach APPC ca_blk 8
M  ThAppcBlkToGw: make gw owner of appc_ca_blk 8
M  ThISend: stat_state = TH_STAT_NOT_ACTIVE
M  ThSendToLocGw: send sap wp rq to local gateway
M  -OUT- tid         48            uid  10393        mode  0
M  -OUT- appc_ca_blk 8             len  80           rq_id 9879
M  -OUT- wait_f_answ 0             cmd  0
M
M  NiIWrite: hdl 5 sent data (wrt=28,pac=1,MESG_IO)
M  ThISend: don't wake up dispatcher
M  DpVmcGetVmByTmAdm: no VM found for T48/M0/I0
M  LOCK APPC ca_blk 9
A  ** RABAX: level LEV_RX_RFC_ERROR completed.
A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
A  ** RABAX: level LEV_RX_IMC_ERROR entered.
A  ** RABAX: level LEV_RX_IMC_ERROR completed.
A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
M  RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 0x7000000002c2480/(nil)/0/0/1
M  RmCleanUpResources3: no resources registered
A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A  ** RABAX: level LEV_RX_END entered.
A  ** RABAX: level LEV_RX_END completed.
M  SigIRegisterHook: cleared hook for signal 11
M  SigIRegisterHook: cleared hook for signal 10
A  ** RABAX: end RX_RETURN
A  Time limit exceeded..
A
M  ThTimeout: no online user, delete mode
M  ThIAMDel: delete tid/mode 48/0 (th_errno 52, release 1)
M  ThIDeleteMode (48, 0, 3, ><, 0, 255, TRUE)
M  ThIDeleteMode: no modes found ..
M    no sub modes
M  ThCheckMemoryState (0, 0, 1)
M  ThIAMDel2: last active mode (0) delete tid (48)
M  ThIUsrDel (52, 1)
M  ThCheckMemoryState (0, 0, 1)
M  ThIUsrDel: set status of T48 to TM_NEND
M  ThResFree: free resources of U10393 M0 I0 (normal mode, complete free) at level 3, errno=52, db_action=TH_DB_ROLLBACK, pooling=1
M  ThResFree: reset spa state for user T48/U10393/M0
M  ThCheckMemoryState (0, 0, 1)
M  ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_CANCEL
M  ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M  ThCallHooks: call hook >abRtmClearSession< for event BEFORE_SESSION_CANCEL
M  ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M  ThIRollBack
M  ThIRollBack: call db_rollback
M  ThCheckComOrRb (event=0, full_commit=1)
M  ThCallHooks: call hook >ab_SosRfcBeforeRollback< for event BEFORE_ROLLBACK
M  ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_ROLLBACK
M  PfAStatRevertCollected: no entries to write
M  ThCallHooks: call hook >dyKeyTableReset< for event BEFORE_ROLLBACK
M  ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_ROLLBACK
M  ThCheckComOrRb (event=2, full_commit=1)
M  ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_ROLLBACK
M  ThVBICmRbHook: called for rollback
M  ThVBIRollBackRedo: got 0 entries to delete again
M  ThShortCommit: call db_commit98 (keep resources)
M  ThCheckComOrRb (event=1, full_commit=0)
M  ThCheckComOrRb (event=3, full_commit=0)
M  ThShortCommit o.k.
M  ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_ROLLBACK
M  ThNoClearPrevErr: clear prev no err
M  ThCallHooks: call hook >rsts_after_rollback< for event AFTER_ROLLBACK
M  ThCallHooks: call hook >ThNoResetMutex< for event AFTER_ROLLBACK
M  ThNoCheckMutex: check for remaining locked intervals
M  ThCallHooks: call hook >SpoolHandleHook< for event AFTER_ROLLBACK
M  ThICommit3: full commit, set time, free resources, redispatch
M  ThICommit3: commit and free resources
M  ThCheckComOrRb (event=1, full_commit=1)
M  ThCallHooks: call hook >ab_SosShmBeforeCommit< for event BEFORE_COMMIT
M  ThCallHooks: call hook >ab_SosRfcBeforeCommit< for event BEFORE_COMMIT
M  ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M  ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M  ThCheckComOrRb (event=3, full_commit=1)
M  ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M  ThVBICmRbHook: called for commit
M  ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M  ThNoClearPrevErr: clear prev no err
M  ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M  ThCallHooks: call hook >dyKeyTableRest< for event AFTER_COMMIT
M  ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M  ThrClearMemory o.k.
M  ThCallHooks: call hook >db_x_short_mem_sync_point< for event AFTER_STORAGE_FREE
M  ThCallHooks: call hook >rsts_storage_free< for event AFTER_STORAGE_FREE
M  ThAlarm: set alarm to 600 sec
M  ThICommit3 o.k.
M  PfStatDisconnect: disconnect statistics
M  ThDealComm: T48/U10393/M0 has no cpic conns
M  clean up all internal modes of T48/U10393/M0

Similar Messages

  • Change Management System configuration

    Dear Experts.
    I have some problem with Change Management System configuration, probably it hasn't installed properly,
    but I cannot tell certain description of the problem to the BASIS administrator.
    The problem is the following:
    At first, then I logon into CMS by the first time, in the tab Domain Data obligatory input fields CMS User and CMS Password are the empty. Whitch username anew password values I should input in those input fields?
    The other problem is then I'm trying to create the new Track: in the tab Track Data input Id and Name of the Track,
    and pushing the Save Button, in the left table it doesn't appear. And then I trying to add Software Components to the Track, pushing the button Add SC, but the component list is empty.
    Edited by: Sergey Tuzov on Apr 25, 2008 11:28 AM

    We has found the problem issue by our self.
    The user account for CMS has no role with permission to SLD component access.
    Therefore, there was no access to SLD resources: software component and others.
    Thanks' for you attention to my topic.

  • Network management system recommendations

    I have been looking at some network management systems such as SolarWinds, but I would like to kick the question back to the community to see what you guys recommend.
    I am looking for a powerful, uniform, monitoring system that includes the following:
    1. Network device management (syslog, configuration management, inventory, device tracker [like CW CampusManager], etc.)
    2. Application monitoring (checking if hyperlinks are working, availability, etc.)
    3. Database monitoring (SQL query response times, etc.)
    4. QoS monitoring (jitter, delay, SLA, etc.)
    5. Alerts
    Anything beyond this would be a plus.
    I am looking for the "best" solution out there in terms of performance and features ...                  

    NetFlow and IPSLA are different technologies.
    Cisco NetFlow captures header information from actual IP traffic passing through router interfaces and reports on traffic usage, applications used, souce and destination of traffic, port and protocol used, ToS, DSCP, next hop and so on. Using NetFlow you can see who is using your bandwidth, what application is being used, etc.
    Cisco IPSLA is a feature from Cisco that lets you measure the performance of a link using simulated packets and reports on jitter, latency, packet loss, Round-Trip time, packet loss, link availability, etc.
    In short, NetFlow is used for bandwidth monitoring and traffic analysis of actual IP traffic that is passing through a link and IPSLA is used to measure how a link will perform when traffic passes through it.
    Cisco supports both features - NetFlow and IPSLA.
    IPSLA needs Cisco devices with IPSLA support at the source and destination ends with atleast IOS 12.3(14)T
    NetFlow is exported as UDP packets to a flow analyzer tool - many tools use 9996 or 2055 for NetFlow export
    IPSLA requires routers with Cisco IPSLA capability and IPSLA stats is collected via SNMP.
    There are tools in the market which can monitor both. We at ManageEngine have NetFlow Analyzer, which supports NetFlow and IPSLA in addition to many more monitoring technologies like Cisco NBAR, WAAS monitoring, Cisco Medianet, etc.
    Cisco NBAR is a deep packet inspection technology which analyzes data packets to report on application usage. NBAR can detect applications hiding behind well know ports or using random ports and you can also further use NBAR to define your QoS polcies.
    If you need to know more on the software that can monitor these technologies, you can contact ManageEngine NetFlow Analyzer support at netflowanalyzer-support 'at' manageengine. com
    Regards,
    Don Thomas Jacob
    www.netflowanalyzer.com
    NOTE: Please rate posts and close questions if your query has been answered

  • CMS(Change Mgmt System) for Portal

    Hello All,
    Can i use my CMS (Change Management System) with the Portal also to keep track of the Transports between Portals. Any guide or help link would be appreciated
    Regards
    Vaib

    Yes Eric, i'm looking for implementing the CMS so that we can do the automatic transport and maintain the version also.
    SO the question is can we use the CMS with the Portal.
    Regards
    Vaib

  • All Information regarding Change and Transport management System in SAP

    Hello Experts,
    Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc.  I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
    Useful answers shall be rewarded points.
    Thanks and Regards,
    Somya

    check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm

  • I need user management system in PHP recommendations to work with Flex client side

    Hi All,
    I have a very big project that involves PHP server side (That i have to develop) and Flex client side. I was wondering it there is a ready made PHP user management system that i can use to provide me:
    - user login/logout
    - forgot my password functionality
    - register (better with captcha)
    Does someone can recommend this kind of php system?

    Hi, guys
    Free and open source PHP User Management Scripts. These scripts  provide a solution of creating a membership system of a website.
    Some PHP user management scripts listed on PHPKode.com. which you can choose the right php user management to meet your demands!
    Hopefully can help you!
    Best regards!
    Anny

  • SMSY Data Source changes after performing Managed System Config

    Hello everyone,
    I am working with Solman EHP1 SPS26.  I have setup up my central SLD to push system data to my Solman local SLD which is then retrieved from Landscape Fetch to SMSY.  Initially, everything seemed to be working and all data sources reported SLD.
    However, once I performed the Managed System Confirguration wizard for a particular technical system, that systems data source would change to TMS/RFC under SMSY.  It's actually not even that consistent.  For example, the server says source is RFC, the product system says TMS/RFC and some of the product instances still say SLD.
    Is this normal for this to happen after connecting a managed system?  Will these systems still be updated via the SLD considering SMSY_SETUP is configured to use the SLD?
    Anyone's help would be greatly appreciated.
    Alex

    Hello,
    If you notice in SMSY this is not an editable field.
    It is reporting the last datasource used.
    Thefore when you made a change via managed system setup that became the last data source used.
    So yes it is normal to see this change.
    If you have configured the datasource to be the SLD, it should continue to update these systems.
    Where you need to watch out is making manual changes in SMSY, as the SLD can view this as a different system to the SID it knows and will generate systems with known SIDs appended with a suffix variable to distinguish it, as the SLD will not overwrite manual changes, and will create new systems instead.
    But the field in SMSY reflects the last data source used.
    Hope this helps some.
    Regards,
    Paul

  • Change Request Management without Transport Managment System

    Hello,
    we would like to use the Change Request Management but without using the Transport Managment System (TMS). Means, we do not want that transport request are created automatically, we do not want that it is possible to log on to the satellite systems via the Solution Manager and we do not want to integrate the transport track into the Solution Manager.
    What effort do we have to estimate for such a change? Does anybody already use a process like this? We would be grateful for any idea or solution.
    Many thanks in advance.
    Jenny

    Hi Jenny,
    you can do this with the following activities in your custom Business Transaction (BT):
    - remove un-useful actions from your action list (TA: CRMC_ACTION_CONF)
    - remove the action from the actions depending on user status (TA: starting from SPRO)
    - unlock the switches from your SMI Project CTS Switches (TA: SOLAR_PROJECT_ADMIN)
    The effort, for copying a standard BT and remove the actions and testing it, is about 5 days, if you already know how to customize a ChaRM BT... last but not least if one of the standard flows is what you really need.
    Please let me know if you need more details, otherwise please reward the forum points
    Regards ,
    Giampaolo

  • Configuring change pointer in SAP DEPOSIT MANAGEMENT system

    Hi,
    I am working on SAP Deposit Management system, which is very much similar to a normal R/3 system.
    I need to create a change pointer everytime a business partner is created or changed. Can you please guide me through the steps especially
    1. what would be the message type i need to configure and activate in BD50
    2. What is the object name and Table name that i should select in BD52
    And also if there is anything else I need to be doing?
    Cheers,
    Babs. <b></b><b></b><u></u>

    Hi Babs
    Here are my suggesstions.
    1. There are different message types available for business partner, seems it depends on what data you want make synchronous. Try with BUS1006, search for BUPA* for message types.
    2. Here you can try for the above message type with object type BUPA_BUP and table as BUT000
    Cheers
    Manohar

  • Solman_admin password changes results in errors during managed system setup

    Hello all,
    I am trying to get Solman 4.0 EHP 1 to work, but get numberous problems.
    Currently I have 6 messages at SAP, but no solution yet.
    Situation:
    Solman 4.0
    SAP_BASIS     701     0003
    SAP_ABA     701     0003
    ST-PI     2008_1_700     0000
    PI_BASIS     701     0003
    SAP_BW     701     0003
    CRMUIF     500     0001
    SAP_AP     700     0014
    BBPCRM     500     0013
    CPRXRPM     400     0014
    BI_CONT     704     0002
    ST     400     0019
    ST-A/PI     01L_CRM570     0000
    ST-ICO     150_700     0016
    ST-SER     701_2008_2     0002
    So, it is uptodate.
    The problem:
    Changing the solman_admin password results in errors during connecting a managed system.
    In the inital setup the solman_admin is created with a pasword.
    After the basic setup I setup some managed systems.
    In the meantime I had to change the password of solman_admin
    I am logged in with solman_admin and do solman_setup to setup the managed system.
    During the setup a process tries to logon back to the solman using solman_admin and the incorrect password.
    This is the logging:
    Step SSO Details
    Found SID for SSO ACL entry : MSD
    Found login.ticket_client for SSO ACL entry : 000
    The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
    The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (823 bytes)
    A failure occured while connecting to ABAP stack on localhost sys=70 client=300 user=SOLMAN_ADMIN
    !! Exception : Password logon no longer possible - too many failed attempts
    A failure occured while importing ABAP SSO ticket certificate in ABAP stack
    !! Exception : java.lang.NullPointerException
    Java SSO ticket certificate of MSD was imported in ABAP PSE of kswv024.mob.local (client 300)
    The Java SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=MSD LoginTicketClient=000)
    Anyone else has this problem?
    gr
    Sander

    Just for clarification it's Solman 7.0 EHP1 correct?
    Also you may want to unlock the following user:
    localhost sys=70 client=300 user=SOLMAN_ADMIN
    Then if you navigate (in solution manager) to TCode solman_workcenter -> "Root Cause Analysis" tab ->"Agent Administration" menu item on the left -> "Applications Configuration" tab -> under the Agent Applications - Configuration menu on the left select "com.sap.smd.agent.application.global.configuration" -> Change the "Scope" drop down in the frame to the right to the SMD agent that you are using for "localhost sys=70 client=300" -> Click the "edit" button to the right of the Scope drop down box -> now find the entry below that lists "SOLMAN_ADMIN" as the user and find the corresponding password entry and update it with the new password that you changed it to -> click save and try the managed setup again.
    Hope this helps, please let me know and we can go from there.

  • Managed system asking logon popup while clicking change & Workload  E2E

    Hi ,
    Managed system asking logon popup while clicking change & Workload  E2E in solman_workcenter ->RCA>E2E
    it asking logon pop-up if i click change analysis & workload analysis for all managed system.
    My Bi client for solman system is 400.but they asking my BI production system logon credential.
    I check in Solman_setup , i gave my bi client only and also i re-run my solman_setup basic configuration wizard.
    But still i am getting the pop-up.
    How to change this setting .Any help?
    Regards,
    Karthik

    Hi ,
    I found In Solman_workcenter-> RCA -> diagnosticsetup -> Diagnostic system -> Advanced setup ->last setup result showing
    "Successfully stored property setup/SMD_URL=http://<solman hostname >:50100/ into SMD repository
    Successfully stored property setup/BI_URL=http://<Bi hostname >:8080/ into SMD repository
    Stored BI URL in BI configuration : http://<BI hostname>:8080/
    Stored Diagnostics URL in BI configuration : http://<:soman hostname>50100/"
    Here BI URL is map to my BI production system. How to change solman 400
    in this place.
    how to change this setting?
    Plz give path to find SMD repository.
    Regards,
    Karthik
    Edited by: HemaKarthik on Aug 30, 2010 7:50 PM

  • I'm looking for a document management system

    Hi there,
    I'm looking for a way to organize, sort, and make searchable about 1200 Microsoft Word Documents. The way our company uses them is to search for individual documents, and also to group them to create customized packets that are used for training.
    Once a group is created, I need a way to print easily. The other problem is that 60% of the documents are designed for learning so they have an instructors filled in part, and a learners blank part.
    Question 1: Should I separate each document, make the instructor version a separate file? Today, it is one file, with page 1 for the instructor and page 2 for the learner (some docs have more than one page.
    Question 2: Does anyone know of a web plugin or app that will take a collection of word documents, and automatically combine them into 1?
    2 years ago, we created a php searchable system and uploaded all docs into it. It workds pretty well for organizing, searching, grouping, and adding comments about the docs... BUT when it comes time to print, it only downloads a folder filled with all the SEPARATE word files. They are numbered, but because they are not one doc, page numbering is a bear, and each doc has a instructor and learner page... for printing, the trainer needs to tell the office staff which page to print for each handout. the instructor copy or leaner copy. Once a master is made, we photocopy it. So the question: Is there an easier way to create 1 file with all the pages? Like convert to PDF or to a single MS Word document?
    Any suggestions are welcome!
    PS: while we are an all mac shop, we do have a dedicated webserver running linux that we could use.
    PPS: I will have interns this summer, so if the solution involves converting all of our MS word docs into something else like pages, I'm all for it...

    It sounds to me like DevonThink might just replace the php system that you already have.
    One way to tackle this might be to look at automating the combining process, rather than changing the overall management system. Various thoughts:
    If the docs were pdfs, a program like CombinePDFs would let you drag and drop all the files onto a screen, re-order them if necessary, and then hit Merge (actually, I think Preview would let you do this, in Leopard). That might help. However, I don't think it would put on page numbers.
    I'm pretty sure Acrobat would let you combine the PDFs and add page numbers, or perhaps take the combined pdf file and just add page numbers to that. (Not sure if this might require Acrobat for Windows)
    Alternatively, you could tweak the docs themselves so that they use a form of chapter numbering, eg: "PDF Introduction-1, PDF Introduction-2" and "PDF-Advanced-1, PDF-Advanced 2" and then not worry about the page numbers. I wouldn't exactly recommend this, as it's pretty useless to say "turn to page PDF-Intermediate 3" and have people find that page, but it's been done.
    Since they are already Word docs, though, it might be best to stick with Word. Word 2008 has Automator and Applescript, and it should be possible to write an Automator or Applescript such you just drop the documents on an Automator app, and it combines them, adds or updates the page numbers, maybe creates a Table of Contents, and spits out an assembled document.
    That said, I don't know how to do that. There is a Combine Word Documents automator action, certainly. You could try asking over in the Word forums:
    http://www.officeformac.com/ProductForums/Word/
    Or here's a macro that should work in Word 2004 (but not 2008)
    http://www.gaebler.com/How-to-Combine-Multiple-Word-Documents-into-One-Document. htm
    This will work best if all the docs are formatted consistently, based on the same template. If they are not consistently formatted, then the formatting will probably change when you combine them in Word, and that would be an argument for converting them to PDF before combining them. It should also be possible to create an Automator action that will convert all the docs in a folder to PDF.
    I doubt there is going to be anyway to automate the instructor/learner copy--someone will have to do that manually, but it does suggest that if you create separate files for each one, it will be easier to do the search, download the found files from the resulting folder, and then manually just delete the learner file from the folder rather than having to open up the instructor file and delete part of it.
    So, some potential experiments to try. Hope that helps.
    Automator to convert the docs to PDF and then Acrobat to combine and number the pages might be your best bet.

  • Error in Managed system configuration.

    Hi Folks,
    In Solman 7.1 i am configuring my Java system in managed system configuration on the last phase of configuration which is "Check Configuration" i got the below error...
    Can any one guide me on this....
    I installed the Diagnostic agent as well as willy inter scope.
    Regards,
    Anil.

    check the note which describes your problem
    1776959 - Solution Manager 7.1 Manged System configuration. Error: Timezone from managed system could not be retrieved: Timezone of J2EE Engine (GMT+01:00) does not match the timezone of the diagnostics agent (Europe/Berlin)
    Resolution
    Open the instance.properties file of the J2EE Engine on the managed system
    Locate the parameter "-Duser.timezone=" and its value
    If the -Duser.timezone is not set the JVM uses GMT
    Set the -Duser.timezone parameter in the JVM of the SMD Agent. If there was no "-Duser.timezone in the J2EE's instance.properties file use the timezone that was indicated in the error message e.g. GMT+01:00 (from the above error message, this might differ on your environment) To do this:
    Locate the smd.properties file (for newer agents the files is called: smdagent.properties)
    The path is: .../usr/sap/<DiagnosticAgentSID>/SMDA<SYSNumber>/SMDAgent/smdagent.properties
    The -Duser.timezone= parameter of the Diagnostics Agent and the SAP J2EE engine need to be set to the same timezone. That means the string needs to be the same for both parameters
    e.g.
    If the -Duser.timezone= parameter of the J2EE engine is set to -Duser.timezone="GMT+01:00"
    set the Diagnostics Agent parameter to:
    smdagent.javaParameters=-DP4ClassLoad=P4Connection -Xmx256m -Xms256m -Duser.timezone="GMT+01:00"
    Restart the Agent
    Re-run the "Configuration Check" in the "Managed System Configuration"
    Please make sure that the time zone configuration is correct according to the SAP recommendations: http://wiki.sdn.sap.com/wiki/display/Basis/Timezone+changes+best+practices

  • How to Configure Transport MAnagement system in CHARM

    Hi
    How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
    Can any one tell me the detailed process? If you have any Configuration document please share it to me
    Points will awarded for helpful answer
    Thanks
    Bhaskar

    In a two system landscape is it necessary to make development the domain controller always?
    No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
    This is not recommended.
    Regards,
    Ashutosh

  • Invoice management system in SRM 7.0

    Dear Experts,
    I get to know that SAP is no longer developing the invoice management  system from SRM 7.0. In fact they have partnered with open text to provide the IMS exception processing functionality plus additional OCR capabilities.
    Does SAP in a way recommend customers planning to upgrade to SRM 7.0 to do away with IMS? could you please share your knowledge on it?
    Thanks a lot in advance,
    Ranjan

    Hi Schuffelen,
    I have a quick question for you - what are the roles you assigned to the user with IMS.. in the Portal and in SRM 7.0?
    I have assigned the portal role "com.sap.pct.srm.core.ro_invoicer" and the SRM role "/SAPSRM/ACCOUNTANT" to the user.
    When you say Invoicing in IMS, do you mean that you are able to create Invoices with enhanced functionality, like, being able to change the document type, creating one-time vendor invoices etc (as mentioned in the link below)
    http://help.sap.com/saphelp_srm50/helpdata/en/42/dc00a78d23162fe10000000a1553f7/frameset.htm
    Any quick help is highly appreciated.
    Sai
    Edited by: SNR on Jul 19, 2010 4:44 AM

Maybe you are looking for

  • Multiprovider diemension

    Do i have to create Diemension while creating multiprovider ? Can I leverage the infocube diemsion in Multiprovider ? What about DSO data fields than if I use the cube diemension ?

  • Sum of void and normal payments in Etext for Positive Pay

    Hi Have a question on EText My situation is that For example, i have the following amounts(issuin checks) 100 200 300 When I void 100$ total will be 500 In oracle When we void it wont get a -100 amount.XML TAG SHOWS only +100. This is the issue..How

  • HT5176 dictation using a wireless keyboard

    How do I engage dication to text on my mac mini?  I have a wireless keyboard and the microphone is not shown on my keyboard.

  • Regarding ECC 6.0- CRM and BW. URGENT....Please help!!

    Dear All, I have a small query- Are CRM and BW an integral part of ECC 6.0? I mean, if I install ECC 6.0, will CRM and BW also get installed OR Do I need to explicitly install CRM and BW after installing ECC 6.0? If CRM and BW are an integral part of

  • How to update a jscrollpane as new tables are added?

    Following is the code of a search form which searches the address based on some search criteria and places the result in the form of table on the panel p3 which has scrollpane sp1. every time the user searches the address a new table adds to the pane