Change name in notes

Hi there,
When making my first note in a pdf with the ipad Adobe Reader i cold give my name to go with notes. How do i change this name?

Open up the Settings app on the iPad. Scroll down past the built-in apps until you see the "Apps" section. Click on Adobe Reader. You can change the Authoring Name here.

Similar Messages

My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account. Everything that I purchased under that id name will not play. How can I fix this?

My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account. Everything that I purchased under that id name will not play. How can I fix this?

I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
Note: @mac.com and @me.com Apple IDs can not be renamed. If you no longer use the .mac or .me email address be sure to add your valid email address as an additional email address.
From here > http://support.apple.com/kb/HT5622?viewlocale=en_US
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Recently I noticed that when I change the name of a photo (correcting a mistake) it always goes back to the previous name, keeping the mistake I'm trying to correct. A spelling mistake, for example. As I keep my photos organized by name and not by date, t

Recently I noticed that when I change the name of a photo (correcting a mistake) it always goes back to the previous name, keeping the mistake I'm trying to correct. A spelling mistake, for example. As I keep my photos organized by name and not by date, this is very annoying.
And today it won't even read my camera's sd card, and I try with 2 different ones. If I restart the computer, leaving the memory card in, then it reads it; but if I pull it out and push it back in it doesn't see it. Whath am I doing wrong, if anything?
Diane

Where/how are you trying to change the name? If it is in Finder (after you've downloaded the pics to your desktop), highlight the pic icon and press Return. the name field will change and you can type in your new name. Hit Return again. That should make it "stick". If you're trying to do it elsewhere, please post the steps that you've tried.
As for your card: do you eject it properly? Either drag icon to trash or hit the eject symbol in the sidebar?

The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help.

I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.

I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault.

Change User Name But Not Email SBS 2003

Greetings,
I need some help. I have a user that got married and wants to change her last name because she sends email from Outlook and it shows her old last name. I would like to change her user name but keep her email address the same.
On SBS 2003 from Server Management -> Users, if you rightClick a user and select "Rename" from the popup menu, you can change the first and last name and leave the email as is. The user name will change and the email address stays the same in
the user list when the edit window closes.
I would like to do this if there are no repercussions such as email folders disappearing or unaccesable or any other changes to anything other than the user name.
What will happen if i change the user name as I descirbed above. Will it mess up any of the users access. permissions, etc?
Thanks very much for your help!
Lewis

Hi Lewis:
If I understand what you mean, you would like this user to receive mails addressed to "old-name" and send mails with the reply address as "new-name".
To do this, open Active Directory Users and Computers, find the user, right click - properties, email addresses.
Add the new email address and set it as default. Uncheck the box to update based on recipient policy.
You can also change the users name in the SBS console, but if you just change the email address there emails addressed to old-name will not be received. So in the console, just change the users name for logon and user name to new-name, but not the
email address. Just add one in ADUC.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

Content Type name is not changing on site level

Hello
I have one new SP2010 site. I am changing the content type name using following script, but it is not working. I have not used content type in any list or library nor in any existing ite, I am not using content type hub. Can anyone why content name is not
updating?
$ParentContentType = $site.RootWeb.AvailableContentTypes["Data control1"]
if ($ParentContentType -eq $null)
write-host "not exist"
else
$web.$ParentContentType.Name="Data 123Control1"
$web.AllowUnsafeUpdates = $true;
$web.Update()
$web.AllowUnsafeUpdates = $false;

Make the following change, hope this helps you
$site.RootWeb.AvailableContentTypes
to
$site.RootWeb.ContentTypes
Ashish Kanoongo, MCP, MCSD, MCTS http://akanoongo.blogspot.in/

HT4236 edited event name will not change on iPad

I edited the spelling of an event name in my Iphoto App., but it will not change after syncing with my Ipad.
I tried deselecting the event and then sync the Ipad to delete the event on the Ipad. Then I selected the
edited event and then synced the Ipad again. But the spelling of the event name did not change.
Any Ideas?

Oh yeah I have synched several times. I have PC with VISTA. I think it has something to do with some titles being READ ONLY or something like that. I need to find how to make them writeable. No changes work on about 20 titles, the artist name? Genre? NOTHING will sync. After sync all changes work fine accept for that 20 or so. titles just won't budge. every time. If I go look on I tunes my changes are still there, just don't sync to Itouch. It not the end of world but the more I upload the more I come across this. I have about 900 full albums and maybe 20 is all that's doing it.

HT5622 I just upgraded to a new MacBook and my wife is inheriting my old MacBook Air. How can I change the her MacBook Air to now be fundamentally hers? That is, so the House Icon under Users folder is her name and not mine? Also the default AppleID for p

I just upgraded to a new MacBook and my wife is inheriting my old MacBook Air. How can I change the her MacBook Air to now be fundamentally hers? That is, so the House Icon under Users folder is her name and not mine? Also the default AppleID for purchase stubbernly remains my own.

You do not mention it, but I will assume you are running OS 10.9.1.
Go to: Apple menu / System Preferences / Users & Groups. Click the padlock and enter your password.
Click the + (plus sign) and set up a new account for your wife. You have to enter a bunch of info. And then create the correct Login Options. Automatic login does not require a password from the selected user.
When that is done, verify the account works by restarting the computer and login as your wife.
Make sure that any applications in your own Users folder that will be needed are moved to the Applications folder in your wife's Users folder.
Now go back to Users and Groups, click the padlock and authenticate, select your own account, and hit the - (minus sign). This step cannot be reversed, so you might want to wait a few days before doing it.
When your wife is logged in, the App Store will know.

Ipod name is not changing

Hi,
I recently have been having problems with my new Nano. I had a ipod for about two days now and my brother decided to make it his with out asking. I was able to change the music but the name is not changing. It still says his name. I have tryed clicking on the name and changeing it. That works for as long as my ipod is connected on my computer. When i plug it back in it says his name again now it freezes and wants to shut down.
Is there any way to fix this? Thanks.
<SCRIPT type=text/javascript>_popupControl();</SCRIPT>

Sounds like you're on auto-sync and with disk mode DISABLED. What you need to do is enable disk mode so that your Nano doesn't automatically disengage from iTunes until you tell it to.
To enable disk mode, connect your Nano to iTunes and as soon as it shows up you need to select the disk mode option on the Summary page that shows up, then click the Apply button. Do this quickly, before the auto-sync process completes, and don't forget to click Apply!
Once disk mode is enabled you should be able to change the Nano's name. When that's done you'll need to eject it from iTunes and the name should remain changed. Note that disk mode requires you to manually eject the Nano from iTunes each time, so if you don't want that you can disable this feature once you change the Nano's name.
The alternative to all this is to restore your iPod, which erases its contents and prompts you for a new name for the iPod. But the approach above is better if you don't want to have to re-load the Nano's contents.

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the o

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the old backup's ?

Does this remove delete the old backup's ?
No, they are all just fine.

When Photoshop opens it says "Welcome John". My name is not John. How can I change this?

When Photoshop opens the welcome screen says "Welcome John". My name is not John. How can I change this?

Hello Gene,
I am just a single account holder. However I looked under Help as you suggested and it said I was signed in with a strange e-mail address.
I signed out and then signed in agani with my own e-mail address and it now has my correct name.
Very weird, but thank you for pointing me in the right direction.
Tog

Cognos iView Name Property not changing

Hello,
I have some Cognos iViews that was imported into the portal. These iViews are pretty much similar to other SAP iViews with the addition of some CPS properties which is Cognos specific. I'm able to change the name of the iView but the change did not apply to the PCD object or at run time. The Name property shows the changed name but just didn't apply.
Upon looking into this further and wondering where the default name is coming from, it seem to be set at the ID level. I went to change the ID and seen the property where you change the object name but it's greyed out. I believe that's because the SAP Portal version that we're on. So, I'm unable to change this property.
First off, is there a way to override the defualt property object name setting?
Secondly, if no to the first question, is there a way to activate the object name setting so it can be changed?

Thank you very much for that suggestion. That process worked!
I did have to export the role in the PCD to XML and then edit the instance of the iView's name to be a space. I was then able to re-import the role with out any problem.
If anyone else runs in to this, make sure that you set all properties on the object you need to re-name <u>before</u> you export it. Otherwise as soon as you open the object you'll get the same error.
Next I am going to create a ticket with SAP about this problem. I can see why they would not want to allow a null value in a property but they should allow a space.
Thanks again,
Steve

Changed name of iPhone, now will not sync with iPad.

I rebuilt my iMac. And changed name of iPhone. Now my iPad does not sync with iPhone. I purchased app on iPhone but does not appear on iPad. How do you set up iPad to sync with new iPhone.
Furthermore my iPad is not showing up in iTunes when I initiate a wi-fi sync from iPad. I see the sync icon spinning on iPad but do not see it in iTunes.
All this may be stemming from fact I just rebuilt my iMac. Prior to the rebuild he iPhone and iPads both synced with each other and the iPad would show up in iTunes when initiated sync from iPad.
I look forward to your replies on this.
...Bruce

Try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
See also Troubleshooting issues with iTunes for Windows updates. Links to more support documents, library recovery techniques, etc.
tt2

How to open a Numbers doc after message "The document (name) could not be opened." is received?

I opened an Excel file with multiple worksheets by doubleclicking on it, saved it as a Numbers file and made lots of changes to it. Now I can't open it at all. All I get is the message "The document (name) could not be opened."
Any ideas?

It seems that your doc is corrupted.
Try to rename it from ********.numbers to ********.numbers.zip
then double click it
You will get a new ********.numbers file with the structure 'package'.
Try to open it by double-click.
Sometimes it works.
Yvan KOENIG (VALLAURIS, France) jeudi 22 décembre 2011 13:16:28
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

For four days I have been unable to open a lot of documents. When I try I get a message "The document "name" could not be opened. You don't have permission. This has happened to an important letter which I corrected four times. My Mac has altered the name

This problem began when I typed in an address http www etc., making one mistake in the address. I corrected it and then tried to copy the address because it was long (I wanted to be able to acces it another time), and that's when the trouble starrted. I just copt documents to get a new one because it's quicker, but it is unorthodox, I know. Since then whenever I copy a document i cannot open it, and it often puts a gobledegook ending to the document name. I've started emailing texts to myself so as to keep them, but I MUST be able to use documents normally. I hava a MacBook Pro, using OS Mountain Lion 10.8.5. I don't like it. It's fairly new, and has messed up my system of documents : the size is alll wrong and the tabulations are worse than ever. I use text edit because I wanted to use Macdictate because I am handicapped (arthritis and firbomyalgia) but I have never been able to get it to work. Since I changed OS I cannot use Text edit properly any more. Please help me. I think it must be a bug that came through when I was putting this address in four days ago. I went to the site once I'd corrected the address and it was perfectly normal. I shall ring them today and ask them if this has happened to anyone else. I live in France. Thank you for your advice. Because I am handicapped and I do not dirve, it is very difficult to get to a Mac store. I deleted Mac cloud documents because I don't want to use it and I thought it might solve the problem, but it didn"t.

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Change name in notes

Similar Messages

Maybe you are looking for