Change of WHT Codes as per the vendor invoice and vendor payment amount
Hi,
my user is having a requirement where the SAP system should change the extended withholding tax codes as per the amount which is invoice and paid to the vendor.
Eg: Upto 10 lacs- rate is 2% (WHT rate)
Above 10 lacs- rate is 2.5%.
suppose i have paid the vendor Rs 8 lacs till yesterday, as the amount is below 10 lacs iam calculating 2% tds. Assume that iam paying 4 lacs today. so the total amount paid is Rs 12 lacs as of now, as the total exceeds Rs 10 lacs i have to collect TDS at 2.5% on Rs 4 Lacs. i need my SAP system to calculate the 0.5 % (2.5% - 2% ) TDS on the Rs 8 lacs which is invoiced / paid till yesterday.
? is it possible in SAP, if yes pls let me know.
Note: sap version 4.7ee
Hi,
my user is having a requirement where the SAP system should change the extended withholding tax codes as per the amount which is invoice and paid to the vendor.
Eg: Upto 10 lacs- rate is 2% (WHT rate)
Above 10 lacs- rate is 2.5%.
suppose i have paid the vendor Rs 8 lacs till yesterday, as the amount is below 10 lacs iam calculating 2% tds. Assume that iam paying 4 lacs today. so the total amount paid is Rs 12 lacs as of now, as the total exceeds Rs 10 lacs i have to collect TDS at 2.5% on Rs 4 Lacs. i need my SAP system to calculate the 0.5 % (2.5% - 2% ) TDS on the Rs 8 lacs which is invoiced / paid till yesterday.
? is it possible in SAP, if yes pls let me know.
Note: sap version 4.7ee
For this purpose you have to define Formula for Calculating Withholding type
Pre conditions:
While defining Tax code , WT formula field must be selected during calculation
config
EWT> Calculation> Withholding Tax codes---> Define Formulas for Calculating WT:
country key
select new entries
WT type
WT Code
WCty
Valid from
Select Header data for Formula than select Formula for calculation
To Base amount : 1000000
WH Tax : 2%
Red base from : 0
To base amount : Maximum
WH Tax : 2.5%
Red base from : 1000000
Check accumulation type in Withholding tax type definition
Edited by: Ramesh Reddy Nalamada on Apr 22, 2008 12:05 PM
Similar Messages
-
Regarding Diff between KR and KA, Vendor Invoice and vendor Document, SM35
Hi Guys
Can I know the major difference between Vendor Invoice and Vendor Document, KR and KA
Can I know how to create and batch job for the documents to be reversed every month starting which created in FBS1 screen to be reversed every month first week or first day of every month
Steps to set up the Batch job in SM 35 dont know exactly the tcode .
Please assist me how to reverse the documents posted to be setup to reverse on the 1st of every month
Regards
Ravi. AadhiHi,
FBS1 is for posting provision entry for the current month and that will be reversed in the next month.
Yes you can schedule F.81 in background with the help of Job scheduler for this you need to take help from ABAper.
From Functional point of view you need to Create Variant for F.81 SAP program in SE38 and the same program & Variant can be used during execution. This is to be on the same date which you have entered at the time of FBS1.
Hope this helps!!!
Br,Vivek -
BSR code on TDS Certificate for Customer and vendor in india
Hi
We have a requirement to print BSR code on TDS Certificates for customer and Vendor in india.
Currently the BSR code for Customer TDS certificates picked up from Bank branch ( BNKA-BRNCH ) field and
for vendor TDS certificates picked up from Bank Key field.
There is a 3rd party sowtware running monthly to update the BNKA table. so we are not following the standard process and we are implemented another options to picked up the BSR code for TDS certificate printing on Vendor/Customers.
For Vendor TDS certificate, we implemented SAP notes 1299729 & 1338645
to print the BSR code from Tax Number1 (T012-STCD1) field and it is working fine.
For customer TDS certificate also we want program to pickup BSR code
from Tax Number1 (T012-STCD1) field
Please let me know is there any other SAP correction Notes avalible to print the BSR code on Customer TDS certificates from Tax Number1 (T012-STCD1) field.
Thanks
Rishaanswews
-
I changed my email because I deleted the other one and I also forgot my security answers so I send a reset to my new email but it's not working it's going to the old one how do I send it to my new email
You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(91761) -
How can we write the code for opening the command prompt and closing the
how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)
rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)? -
I want the t code to see the against which service order payment was done ?
i want the t code to see the against which service order payment was done ?
you can use ME2S, but if not what you are looking for then ask ABAP to develop a customized report for service orders only for whom payment is done.
regards,
qsm sap -
I am trying to change my password, but not remember the security questions and not access recovery email. Please give me a solution.Ana Maria Cappatto Simoes/ F. 11.50414433
Welcome to the Apple Community.
1. Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
2. If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
3. If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from Best Buy. What other information does Best Buy need? What will they do? Will I get a new box? What happened to the days of just typing in a simple s/n?
Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html -
If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?
Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility. -
Clear Down payment against Vendor Invoice through Automatic Payment Program
Hi
We have to adjust vendor invoice against down payment (Advance) made through automatic payment program (F110)
Please guide us is there any configuration require to consider Down payment transactions during F110 to clear against Vendor Invoice
Ex :1. Advance payment made through special GL indicator 50K.
2. Invoice document 75K posted in vendor.
3. Now we have to clear down payment made (50K) against 75K through F110.
Regards
SreenivasuluHi srinivasulu,
First u create down payment request through F-47 and define the spl gl indicator for down payment and assign the gl account for down payment gl code..
Regards,
Nivas -
What'z the difference between the Commercial Invoices and
What'z the difference between the Commercial Invoices and
Invoices/Excise Invoices? Also I understand that we can combine 2~3
invoices and can create one commercial invoice? If it is possible, how
to create the same?
cheers
shalsa007....Hello,
A commercial invoice is a bill for the goods from the seller to the buyer. Commercial invoices are utilized by customs officials to determine the value of the goods in order to assess customs duties and taxes.
In general there is no standard form for a commercial invoice although they tend to contain many of the following features:
seller's contact information
buyer's contact information
consignee's contact information (if it is different from the buyers)
invoice date
a unique invoice number
sales terms (usually in incoterm format)
payment terms
currency of sale
full quantities and description of merchandise (Generally this includes unit price and total price. Product descriptions should be consistent with the buyer's purchase order. Including the Harmonized System commodity codes can be helpful, especially in countries that are WTO members.)
Excise invoice Original for Buyer copy, whether prices are inclusive or exclusive of excise duty.
The invoice in which the Excise duties are included.
As per Indian tax system, Excise duty (16%) is payable by each manufacturing unit on the value of manufactured goods / on the value added. The manufacturing plant is supposed to submit an excise duty report on fortnightly / monthly basis. Various registers (RG1, RG23A, RG23C, PLA) are maintained for that purpose, which record all the transactions including movement of goods, cenvat credit available and cash balance available.
In SAP, we use transaction j1id for configuration and j1iin, j2i7, j1i5, j2i5, j2i6, j1ip for creating, extracting and printing excise invoice.
*Please reward if this helps**
Regards
AK -
BAPI for Vendor Invoice and Credit memo - FB60
Hi
Iam using BAPI_ACC_DOCUMENT_POST for creating Vendor invoice and Credit memo ..Could you please tell me which fields to be populated on the below structures?
what will be the value i should use for BAPIACHE09-BUS_ACT...RFBU or RMRP?
ACCOUNTPAYABLE ( BAPIACAP09)
ACCOUNTGL(BAPIACGL09)
CURRENCYAMOUNT( BAPIACCR09)
Only the fields which needs to be populated on these structures when we do FB60 invoice and credit memo using bapi..
Thanks in advance
GoviHi,
Populate in Document_header : (User name, Comp code, Doc DAte, Doc type, Ref Doc No)
Account GL : ItemNo_Acc, GL Accuont, REf Key1, Refkey2, Refkey3, Account Type = 'A', Doc Type, Comp code
Account_number, Cost_center
Account Payable: ItemNo_Acc, Vendor_No, Rey_key1, Ref_key2, Ref_key3
Currency Amount: Item No_Acc = 2, 1
Curr = USD, USD
Amt_Doccur
At last use commit bapi.
Thanks,
Krishna -
How to avoid duplication of vendor name and vendor account group
Let me know the menu path for setting in SAP - controlling / avoid duplication vendor name and vendor account group in one purchasing organisation during creation of vendor / uploading mass data.
with regards
vvHi,
See vendor code is unique no. But the name is not at all unique. so system allow to create duplicate record.
by giving authorization to single person only you can do it.
system discipline is actually required -
Hi all,
can u plz send me the mandatory fields(along with discription) for creation of FB60(vendor invoice),and FK01(cost center).
thank u,
Srinivas Reddy.The FK01 is the transaction used to create a Vendor.
The mandatory fields are:
a. NAME1: For Name
b. SORT1: For CUIT number.
c. SORT2: For alternative CUIT number.
d. CITY1: For city.
e. STCD1: Tax Number.
f. Others depending the case.
For FB60 (Vendor invoice) the mandatory fields are:
a. ACCNT: Number of Vendor Account.
b. BLDAT: Date.
c. XBLNR: Reference Number.
d. WRBTR: Invoice Amount.
e. HKONT: G/L Account Number.
f. WRBTR: Invoice Amount. The same as d but in the item.
g.MWSKZ: Tax Type. Depending the case.
h. KOSTL: Cost Center. Depending the case but is highly probable that the field were mandatory.
i. Others. Depending the case.
I have given to you the most probably fields that are mandatory for those transactions.
Your Sincerely
Leonardo Lopez
FI Consultant -
Relationship beetween Vendor List and Vendor
Hi experts
i'd like to know where is possible to find, into transaction BBPAVLMAINT, the relationship beetween Vendor List and Vendor.
regards
andreaHi
Yes... we have done this long back successfully..
The BADI - BBP_DOC_CHANGE_BADI can be easily used...
Also, you can look for BBP_SOS_BADI...
Do let me know, incase you face any problems.
Regards
- Atul
Maybe you are looking for
-
How do I get purchased audiobooks to show up in the iBooks app?
-
ITunes and Computer think my iPhone 3G is a new/different phone
I Connected my iPhone to my computer to Sync it today and it went straight to the iTunes store and then showed a message saying "Congratulations you have actiavted your phone" or something similar. Now my iPhone which used ot have a personalised name
-
Problem in Automatic mail generation after shipment creation in vt01
Hi All, In VT01 Automatic mail generation to customer whenver a new shipment is created & in from address user mail adderess is mentioned but in my requirements i have to mention different mail id in user mail address. how can i do this? please gi
-
Adobe Media Encoder CS5 - 5.0.1 update
When I try to update AME CS5 using Adobe Updater, I get this error message: The following updates were unable to install. If you wish to install these updates, please fix the problems below and retry: Adobe Media Encoder CS5 5.0.1 Adobe Media Encoder
-
Apple ID authentication not working
Last year, I changed my e-mail address to reflect my married name. My old Apple ID was my maiden name e-mail address (I'll call it KR for short), and my new Apple ID (KT for short) is my new e-mail address. I assume I must have just updated my e-mail