"change output" feature in output type configuration

Hi
I am trying to find a way of automatically triggering repeat output on change of delivery date in order.
In output type configuration-general data there is a are for change output the F1 helps reada like this "..........The routine in the program checks which changes should result in a changed output being sent. ......"
If anybody has worked on this functionality, please help me by giving any relevant input.
TIA

Take a copy of output requirement 014 and change the code to make it work for your delivery date. Output requirement 014 is provided in standard SAP for BV - cash sales. In cash sales, if the net value is changed, the output is automatically retriggered.
Remember the KOMKBV1 in the below code represents the sales orders communication structure. If you are doing this requirement for delivery document use KOMKBV2 and for billing document output determination use KOMKBV3.
***INCLUDE LV61B014 .
      FORM KOBED_014                                                *
Requirement to create an new order confirmation / invoice when     *
the net value is changed.                                          *
FORM KOBED_014.
SY-SUBRC = 4.
If the net value has changed, resend the Output type RD03
IF KOMKBV1-NETWR NE *KOMKBV1-NETWR OR
     *KOMKBV1-NETWR IS INITIAL.
    SY-SUBRC = 0.
ENDIF.
ENDFORM.
      FORM KOBEV_014                                                *
      Reference to KOBED_014                                        *
FORM KOBEV_014.
   PERFORM KOBED_014.
ENDFORM.
Thanks
Kapil Sharma

Similar Messages

Output type configuration set up

Hello MM Masters
I have to create Material Master, PO, delivery, Goods receipt inbound, inventory adjustments in SAP. I am developing some interfaces to send these to external distribution vendor. I am using Idoc message type matmas, orders, desadv, mbgmcr01, shpcon (WHSCON). Can anyone help me to find the right Application, output types, procedures used for setting up output type configuration in SAP to generate idocs from these transactions during change/create
Thanks
Ricky

Hello Ricky,
For triggering Idoc you will use your regular output type but medium will be "Send Message via EDI / ALE"
More information you will find with the following link<a href="http://help.sap.com/saphelp_46c/helpdata/en/15/3cf334c20ccc52e10000009b38f83b/frameset.htm">IDoc interface</a>
Hope this helps.
Regards
Arif Mansuri

In SAP 4.6c In classical reports output how to change Font size and Font type

Dear Experts,
In SAP 4.6c, in classical and interactive reports output how to change font size and font type.
Regards,
Zaker.

These are HTML formatting questions. Nothing to do with the Oracle SQL and PL/SQL languages.
With old-style HTML, the font size and family are set using the font tag.
With modern style HTML, that is done using cascading style sheets (CSS).
Your favourite search engine will turn up tons of information on both.

Production Order : OUTPUT Type Configuration for Production Order as EDI

Dear SDN All ,
OUTPUT Type Configuration for Production Order.
Doubt in third Point
We have found the IDoc " LOIPRO01 " for Production Order
(Please confirm that this IDoc can be used for outbound IDoc for Production Order)
And foloowing
1. Defining the Output Type for Particular Application.
 T-Code: NACE
A. Output type have created upder application "ME" description : "Inventory Management"
B. " ZEDI " created for getting output as EDI type
 ZEDI is copied from "WF01" output type. and
 Transmision mediam as "EDI"
 Program : RSNASTED
 Form Routine : EDI_PROCESSING
 (Please confirm is this for IDoc creation)
2. Partner profile creation:
A. Partner profile created under logical system and
B. and In outbound parameter declared as "LOIPRO"(This is for sending the IDoc "LOIPRO01" to XI system).
3. Customization for output type for Proction Order -- (For CO02,CO08) ---
 A. But only one functional customization is remaining to do, for getting the IDoc while saving the Production Order in T-Code "CO02" and "CO08"
 For Example:
 in sales order transaction va02 (in DBI 450 client) and select any Sales order.
 & select following menu path.
 Extras --- > Output -
> Header -
> output
 Here we can set our output type "that U defined in NACE Transaction-Code"
 Like the same way I want to set output type for CO02, CO08 transaction.
But I couldn't find the menu Item in Co02 and Co08 for setting the output.(like VA03)
Please help me out for setting the output type for Production Order Creation.
Thanks in advance,
Dhanabal T
Message was edited by: Dhanabal T

Hello.
I have a similar requirement. Did you guys find the solution?

Output type configuration for GR : MB90

Hi,
I want to know all the steps required for configuring the output type for GR likw WE01 ,02,03 etc to print with MB90.
regards,
zafar

Check all the steps given below,
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
Enter the local printer where you want to print your Goods posting document
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

For m.type 261 goods issue output device need to be configure

Hi All,
As above said in the subject line is there any way to configure output device for m.type 261 goodsissue
I want to configure output device only for m.type 261 not for other m.types so kindly let me know the configuration settings.
regards
sapmm

The configuration steps are under:
IMG \ Materials Management \ Inv. Man. and PI \ Output determination . . .
Condition Tables
Access sequence
Output Types
Procedure
You want a small Requirement (an ABAPer could create in minutes) for your Procedure that limits the output according to Movement Type 261.
Regards,
Nick

New outputs generated when changing logical system in output master record

Hi!
We are sending documents from ECC 5 to a legacy system via XI/PI. We are about to move from an old XI installation to a new PI installation. The output record used (for example in a billing document) is set up based on logical system. When moving from the old to the new platform, we need to change the output records from the old logical syste to the new logical system. However this leads to generation of new outputs in all billing docs when opened in change mode. This goes also for billing docs where we already generated outputs via lthe old logical system in the past. Is there any solution to prevent the automatic generation of outputs for documents where the condition type already was successfully processed (as it works when the logical system is not changed)?
Best regards
/Björn

Normally the same output is not supposed to be generated, unless 'Multiple issuing' checkbox is checked in the output type configuration.
Also you can probably add a requirement in the output determination procedure and check if output record already exists. Take a look at the standard 'Reprint' routine, kind of the opposite is needed in this case.

Csv output feature results in a "page not found" error in IE (ver 8)

Has anyone else had issues with the csv output feature returning a "404 page not found" error when using IE version 8.0?

Hello. I'm getting an Http 404 The webpage cannot be found" error when trying to export any APEX application's query results into Excel (Application Express 3.2.1.00.10). This was working fine before. Nothing changed with our APEX application. I've been always using I.E. Version 7.0.5730.11 with no problems. I've reset the I.E. defaults and still the problem exists. I've downloaded Mozilla Firefox and the problem does not happen. However, I would like to know why my I.E. still gets this error? Any feedback or suggestions would greatly be appreciated. Thanks for your time.

Output determination and output type?

hi all,
wat is meant by output determination and output type?how and y we use it?
regards,
keerthi

Hi Keerthi,
Output determination is used in message control. You can read more about it here:
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19878343b111d1896f0000e8322d00/frameset.htm
to configure it please use transaction: NACE
best,
Wojciech
please reward points for helpfull answer

Change in the ALV Output Screen field

Dear All,
How can I change or Edit the output apperared in the ALV report.
My requirement is that,
Consider Report have given Output in ALV as 213.00 in quantity field that I want to change at run time manualy as per my requirement.
Pls. Suggest.
Aniruddha

Dear Sir,
I AM CALLING THIS SUBROUTINE IN FOLLOWING SEQUENCE...AND I WANT MY QUANTITY FIELD SHOULD BE EDITABLE IN RUNTIME .PLZ SOLVE MY PROBLEM.
PERFORM top_of_page.
PERFORM fieldcat_init USING gt_fieldcat[].
PERFORM sub_comment_build USING t_list_top_of_page.
PERFORM ALV .
FORM fieldcat_init USING rt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
DATA: pos TYPE i VALUE 1.
CLEAR ls_fieldcat.
pos = pos + 1.
lCLEAR ls_fieldcat.
 pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'GSMNG'.
ls_fieldcat-seltext_m = 'QUANTITY'.
ls_fieldcat-tabname = 'MATRIX1'.
ls_fieldcat-outputlen = 18.
ls_fieldcat-EDIT = 'A'.
APPEND ls_fieldcat TO rt_fieldcat.
FORM ALV .
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND =
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
 IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
 T_OUTTAB = matrix1
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
if SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Pls. suggest the changes inthe above coding
Thanking you in anticipation
Aniruddha

Output determination for shipment types

Hi SD gurus,
I am new to SAP. I am unable to configure o/p for shipment documents. I wanted to send an EDI to carrier when my planning is done and email to customers when loading takes place. an some1 help me through this.
Thanks in advance.

Dear VGR,
Do the configuration settings for the shipment output determination through this IMG path
IMG>Logistics Execution>Transportation>Basic Transportation Functions>Output Control-->Maintain Output Determination for Shipments
-->Maintain Condition Tables
-->Maintain Output Types
-->Maintain Access Sequences
-->Assign Output Types To Partner Functions
-->Maintain Output Determination Procedure
-->Assign Output Determination Procedures
I wanted to send an EDI to carrier when my planning is done and email to customers when loading takes place.
For he above requirement you take help of ABAPer to develop the output program in such way and assign that program to your shipment output type.
Maintain the condition records through VV71 transaction with Transm. Medium EDI and Email
I hope this will help you,
Regards,
Murali.

One Output with multiple communication types

Hello,
My requirement is to print the document as well as send an email to the customers from the same output. Basically One output with multiple communication types ( PRINT & EMAIL). How to configure this in the output type configuration area? Please reply. Thanks

This should be possible with the same output type,
have the output type defined with multiple medium in NACE under processing routines. (say print out in one line & external send in another).
have the condition record maintained appropriately for different customers with different medium.
Note: if your access has customer, dont think you can maintain both 1 & 5 for the same access.
if this functionality is required, i think you can acheive this by maintaining the output under different access, but this will not ensure the same condition type flowing into the document unless the earlier condition type goes to processed status.
Thanks & Regards
Ilango

How to change the input and output schema in BPEL process

hi',
Please tell me how to change the input and output schema in BPEL process after the process is made.
thanks
Yatan

If your intention is just changing the content you are passing to bpel/returning from bpel
Here is another way
just update your default created xsd files with new elements, update wsdl elements in message definition and chnage bpel code to reflect new elements in activities
Regards,
Praveen

How to print the changed address in delivery output

Dear Gurus,
As all we know the customer address comes in sales order from customer master table or address table and further get copied into delivery also in case of same SP and SH.
My issue is that we do not maintain different SH for a sold to party so SP = SH and there addresses will also be same.
In output we are getting address from ADRC table.
Now if we change the ship to party address in delivery manually and get the output the printed address is unchanged.
But I want to print the changed address in delivery output without changing the masters and maintaining diiferent ship to party.
Please help me how to determine it in print out???
Thanks,
Sanjay

Hi,
I think the logic you have written is wrongly on output.
The logic is like this:
Pass the document number into "VBPA" table.
Execute.
Fetch the address number against "WE(ship-to-party)".
Pass the same address number into "ADRC" table to get the address.
Here you will get the new address which is different from the maaster data.
Regards,
Krishna.

Changing font size for output device / spool file

hi all,
i see only these below parameters for print in the code of the transaction which gets spool no and output device as input and prints it.
i need to increase the font size of the print out.any help?
LAYOUT                 = 'X_65_132'
      LINE_COUNT             = 60
      LINE_SIZE              = 110

Hi Sona,
You can not do that in report.
If you need some output format like font type, color, size you have to use Smartforms or Sapscript.
Sapscript Tcode: SE71,
Smartforms TCode: SMARTFORMS.
Regards,

"change output" feature in output type configuration

Similar Messages

Maybe you are looking for