Change the status in a ALV

Hi!
I call a ALV in a subscreen, in the catalog there are 2 check box in edit mode, so the default status gui is diferent if I call it with no editable fields, I want to set the status in read mode, there's any way?
Thanks,
Luis

Hello Luis
You have to do this logic yourself. Assuming that you have created your ALV grid instance already then you have to code in the PBO module where you set your GUI status the following lines:
MODULE status_0100 OUTPUT.
IF ( go_grid->is_ready_for_input( ) = 1 ).
" set GUI status for editable mode
ELSE.
" set GUI status for display mode
ENDIF.
ENDMODULE.
Please note that method <b>IS_READY_FOR_INPUT</b> has optional parameter for row number and column number. Thus, it appears that you can specifically ask the grid instance whether a certain column (your checkbox column) is editable or not.
Regards
Uwe

Similar Messages

Changing the status of Equipment in a follow up action

Hi All,
           I have a requirement in which a function module will be triggered for a particular Follow up action.
In this FM we have to determine the equipment and the Maintenance Order , if both are available , status of the equipment
should change to 'A' , status of maintenance - order = 'Technically completed' and Maintenance Notification = 'Notification Completed' .
How can this be done.? I am able to change the status of Maintenance order and notification but can anyone help me in
determining the equipment and changing its status to 'A'. ?
Thanks in advance.
Vasuki

Hi Gajesh,
                 The process is as follows :
1) During Calibration of a product,depending on the technician's User decision , 3 follow up actions are created.
2) Each follow up action has one FM associated with it, which is customised in      SPRO > Display IMG > Quality Management > Quality Inspection > Inspection Lot Completion > Define follow-Up Action .
3) In the first case ( first Follow up action when the inspection is successful) the first FM is triggered. In this FM we have to perform the following steps :
                               a) Determine the Maintenance Order and the equipment.
                               b) Incase both are available, status of equipmnt should be changed to 'A',
                                   Maintenance Order should be changed to 'Technically completed' and
                                   Maintenance Notification to 'Notification Completed' .
If you need further info pls let me know.
Thanks,
Vasuki

Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

Hi
Using SPD i am creating list workflow.
Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
Please help me for automatic process.
What i should do to change the status to "Complete" automatically after manager approval
Regards
Jhanani
Janani.R

Hi Janani,
From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
we should be able to see the Approval task’s status.
Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Is it possible to change the status from Bid Rejected to Bid submitted?

Hi there.
We are working in SRM 4.0.
One user rejected a bid, but it was a mistake. Is it possible to change the status from Bid Rejected to Bid submitted?
We would like to modify the status from Bid Rejected to Bid submitted or Awaiting Approval to Bid submitted in order to solve errors.
Thanks and regards.
Raúl Moncada.

Hi ,
Use Function Module : BBP_PD_BID_STATUS_CHANGE
Supply Activity = 'QOSU' .
Regards,
Sachin S M

Error in CV02N while changing the status.

Hi Experts,
We are getting a error while changing the status of technical change document that " Inconsistent characteristic value assignment" .The document is in status "in use" and we are trying to change it to " old version" using T code CV02N.
when I tried to see the error desription it is telling that delete the inconsistencies. But I didn't find the list of incosistencies. What may be the problem? Please help me out to get ride of this problem.
Thanks and best regards,
Praveen

Hi Pete,
The full text message: Inconsistent characteristic value assignment
Message no. C1821
In diagnosis it is telling that "You want to change the value assigned to a characteristic. However, the change causes inconsistency, so the new value is not allowed."
Actually I am just changing the status of the document. I am not changing any characteristic value.
Actually it is appearing as information message. but while saving it pop up and not allowing to save.
Please do the needful.
Best Regards,
Praveen

RE: Mail notification on changing the status of the spport desk messages

Hi,
I am facing problem with the automatic mail notification in service desk configuration.
When i create a support desk message in the satellite system, the message appears in crn_dno_monitor in solution manager. When i change the status of the message from new to in process, i get a mail only with the subject line "MESSAGE IN PROCESS STATUS' and the pdf attachement (sapscript) is missing. I have checked all the configurations in SPPFCADM but i am not able to figure out the problem. Please help me out of this problem.
Regards,
Sowmya

Hi,
there is a SAP Note with a tutor for send_mail via action. See Note 691303 and the attached .zip-file.
It shows step by step how to set it up and is a very good tutorial. You'll need additional (free) software to let it run.
Regards,
Dirk
@Sowmya: what content does the mail have? None? There is a possibility in SolMan where you can choose whether you want the content as a .PDF-Attachment (which, in my eyes, isn't that sparkling) or as regular mail text.
It is located in TA SCOT. Double klick on "SMTP", then klick on "Internet" and there choose in the Drop Down Menu of Sapscript. When you have trouble, look at my [screenshot|http://home.arcor.de/dirk.malas/solman/Mail_TXT_PDF.JPG].

Change the status of a Support Desk Message in Sol. Man.

Hello,
On the Solution manager system I have configured the service desk functionality. So end users are able to create support messages from the satellite systems as well on the solution manager system. For the confirmation of a proposed solution I want to use a workflow which asks the creator if the proposed solution is correct yes or no.
Is there a BAPI or function which change the status of the support desk message? If so how does this BAPI or function work. An example would be great.
Kind regards,
Richard Meijn

decveloped the custom rfc

While changing the status of content in Weblogic 10.3 programitically

while changing the status of content in Weblogic 10.3 programitically is giving the error
User is not authorized to check in the node.
     at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.handleWorkflowActions(InternalWorkspaceOpsBean.java:480)
     at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.internalCheckIn(InternalWorkspaceOpsBean.java:420)
     at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.checkIn(InternalWorkspaceOpsBean.java:343)
     at com.bea.content.virtual.internal.server.bean.WorkspaceOps_xe5vix_ELOImpl.checkIn(WorkspaceOps_xe5vix_ELOImpl.java:166)
     at com.bea.content.virtual.internal.WorkspaceOpsImpl.checkIn(WorkspaceOpsImpl.java:90)
     at com.bea.content.federated.internal.VersionManagerImpl.checkIn(VersionManagerImpl.java:239)
     at com.nab.portal.portlets.cmscontent.EndDateCMSContent.updateNodeStatus(EndDateCMSContent.java:243)
     at jsp_servlet._portlets._cmscontent.__sampletest._jspService(__sampletest.java:140)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.jsptools.servlet.PagedResultServiceFilter.doFilter(PagedResultServiceFilter.java:82)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
     at org.apache.beehive.netui.pageflow.faces.internal.PageFlowViewHandler.renderView(PageFlowViewHandler.java:203)
     at com.bea.portlet.adapter.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:77)
     at org.apache.beehive.netui.pageflow.faces.internal.PageFlowViewHandler.renderView(PageFlowViewHandler.java:203)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.nab.portal.filter.UserSessionFilter.doFilter(UserSessionFilter.java:176)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.nab.portal.filter.CrossSiteScriptingFilter.doFilter(CrossSiteScriptingFilter.java:333)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.jsptools.servlet.PagedResultServiceFilter.doFilter(PagedResultServiceFilter.java:82)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3502)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2186)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2092)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
the node is checke odut by annoymous user biut its not checked in the status from 1 to 2 is updated but it not updated to published or retired
are there any Entreprise scoped roles which sholud be created to set the visitor entitlements on the content
Please do reply asap
Thanks
Regards
Rani
Rani Bhatia

hi
while changing the sttaus of content in weblogic 10.3 programitcally
i have written this code List nodeIds=null;
     INodeManager iNodeManager= ContentManagerFactory.getNodeManager();
          try {
          ID nodeId = new ID();
          nodeIds = new ArrayList();
               linkNode =iNodeManager.getNode(ctx,fileName);
               log.info("Linknode"+linkNode);
               String Encodedpath= linkNode.getURLEncodedPath();
               log.info("Encodedpath"+Encodedpath);
               com.bea.content.ID nodeid= linkNode.getId();
               nodeIds.add(nodeid);
          log.info(nodeid);;
               String repoName = nodeid.getRepositoryName();
               log.info("repoName"+repoName);
                    IVirtualRepositoryManager repoMgr = ContentManagerFactory.getVirtualRepositoryManager();
                    com.bea.content.federated. IVersionManager iversionManager= ContentManagerFactory.getVersionManager();
                    com.bea.content.federated.IWorkflowManager iWorkflowManager= ContentManagerFactory.getWorkflowManager();
               if(linkNode!=null)
                    int i= linkNode.getWorkflowStatus();
                              log.info("Workflow Status"+i);
                              int j=linkNode.getLifeCycleStatus();
                              log.info("Workflow Status"+j);
                              linkNode.setLifeCycleStataus(5);
                              linkNode.setWorkflowStatus(5);
                              //iNodeManager.save(ctx, linkNode);
iversionManager.checkOut(ctx, nodeid, version.getVersionId());                         com.bea.content.virtual.version.VersionableContent versionableContent1 = iversionManager.getVersion(ctx, nodeid, "1");
                         versionableContent1.setStatus(5);
                         iversionmanager.checkIn(ctx, nodeid, versionableContent1);
                         log.info("checkin");
                         b=true;
                    else
                         b=false;
                         log.info("Node already retired ");
          catch (AuthenticationException auex) {
               log.error("WEB1013IF-3 getLinkNode" + auex.toString());
          } catch (AuthorizationException authex) {
               log.error("WEB1013IF-4 getLinkNode" + authex.toString());
          }catch (RepositoryException repoEx) {
               log.error("WEB1013IF-5 getLinkNode" + repoEx.toString());
          return b;
by default annoymous user check out the node
if for any logged in user which api has to be used eg if i have created the weblogic user how to set this user through api , which apis are used to set this user programmitically so that this user can check out the node and check in the node so that its status can be updated
Thanks
Regards
Rani Bhatia
Edited by: user10309975 on Jul 5, 2010 10:29 PM

While Changing the status system gives error

Dear Experts,
In Solution Manger, While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
Document 8000002519 refused for technical reasons: ERROR_FREE
Message no. SOCM_ACTION_LOG203
Diagnosis
The status value cannot be changed.
The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
System Response
This change transaction is skipped during report processing.
Procedure
Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
Also if i select the status as in process, then it executes sucessfully. Please help me in this.
Ramesh Jaiswal
9867936636

Hi Ramesh,
Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
I just checked.
So it seems this is availabe only after SP18.... we can use the above report.
Kindly confirm once you solve your problem.
Dirk
Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
Regards
Prakhar

Changing the status of the sales order item based on reason for rejection

Hi All,
When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
Regards,
S.Subasree

Hi subburamaiah
If you want the report you can create a separate SIS report . In that take the input field as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
Regards
Srinath

Restricting changing the status of an order

Hello,
When creating an order (tcode va01), it is possible to change the status of the object. Some of the statuses are for example:
u2022 1 Napp Not Approved
u2022 2 App Approved
u2022 3 Reje Rejected
u2022 u2026.
Is it possible to restrict people in choosing the status? For example one can only choose Napp and the other one can only choose App.
I have checked the va01 auth obj in su24, but did not find any auth obj related to this matter.
Thank you very much for your help in advance.
WR
Salameh

Hello,
I think no status objects are present for customization in sap and for this you can use STATUS_OBJECT_CREATE (functional module) and it will generate for you a temporary OBJNR and you can fill at least OBTYP and replace it actual one, for replacement you can use function module STATUS_OBJECT_SWITCH_NUMBER.
Hope this helps
Dheeraj

How to change the status of clinical order header

Hi all,
I need to change the status (N1CORDER-WLSTA) of the clinical order header. I have found the way to change the status of the items and it works, but i dont know how to change the header status.
Now, for the items i do:
1- Create an object type cl_ishmed_prereg
2- Load the item (n1vkg-vkgid)
3- Use set_status method
4- Save the object
5- Commit work
So, do you know how i can change the status of the header? Im looking for other methods but...
Thanks,
Manel

In order to change the clinic order header status u have to:
1- Obtain the instance from item instance:
    CALL METHOD lv_prereg->get_corder
      IMPORTING
        er_corder = lv_corder
        e_rc      = rc.
2- Create a var type rn1_corder_x
3- Modify:
is_n1corder_x-wlsta = 'RE'. " new status
is_n1corder_x-wlsta_x = 'X'.
4- Use change mehod:
    CALL METHOD lv_corder->change
      EXPORTING
        is_corder_x     = is_n1corder_x
      IMPORTING
        e_rc            = rc
      CHANGING
        cr_errorhandler = cl_error.
5- Save:
CALL METHOD lv_corder->if_ish_objectbase~save
6- Commit work
Regards,
Manel

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

Siebel Hangs up when changing the status of service request

Hi,
We are facing this typical problem since last 2 weeks. When closing the SR, CRM hangs for random(unable to detect a pattern till now) SRs.
The steps we follow to an SR is:
1. Enter the SR #
2. Change the status to "resolved"
3. Type the resolution in "resolution" text field and click on white space.
4. A new row gets generated with status "unscheduled"
5. Place a check mark near the newly generated row.
6. Change the status of the SR to "closed"
Now, some SRs get stuck at step 3. When clicking on white-space, CRM hangs.
We've tried everything from clearing IE cache / temp / cookies / increasing temp file size (to 5000 in IE6 and 1024 MB in IE7)
Even set-up a fresh system but no avail.
Even changed the primary internet link to secondary one but no help.
On top of that the SRs which make IE hang seem to be appearing randomly. Sometimes I can close 20 SRs at a stretch and sometimes 1-2 SRs get hanged every 4-5 SRs.
Once in a while an error pops up: "The selected record has been modified by another user since it was retrieved. Please continue (SBL-DAT-00523)"
No one else was working on the SR when such errors came.

You can ave a runitme event or workflow triggered that can generate such behavior.
First increase logging on your object manager (evtloglvl :) ) and look at any error message.
Second assess with your development team what automation has been setup ranging from script, Business Services, workflow to assist you in troubleshooting.
Best Regards
Evtloglvl

Unable to change the status of a project to approved

Dear Members,
I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
Please enter an active project manager for this project in order to change or update this information._
Can any one please help me in resolving this issue.
Many thanks in advance.
Regards.

R4S wrote:
Dear Members,
I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
Please enter an active project manager for this project in order to change or update this information._
Can any one please help me in resolving this issue.
Many thanks in advance.
Regards.Please see these docs.
CMRO Partially Implemented Visit Errors with "Please enter an active project manager for this project in order to change or update this information" [ID 864812.1]
Update_Project Erroring With PA_PR_INSUF_PROJ_MGR While Creating Task For Templates [ID 1085068.1
Thanks,
Hussein

Change the status in a ALV

Similar Messages

Maybe you are looking for