Changing the status of Equipment in a follow up action

Hi All,
I have a requirement in which a function module will be triggered for a particular Follow up action.
In this FM we have to determine the equipment and the Maintenance Order , if both are available , status of the equipment
should change to 'A' , status of maintenance - order = 'Technically completed' and Maintenance Notification = 'Notification Completed' .
How can this be done.? I am able to change the status of Maintenance order and notification but can anyone help me in
determining the equipment and changing its status to 'A'. ?
Thanks in advance.
Vasuki

Hi Gajesh,
                 The process is as follows :
1) During Calibration of a product,depending on the technician's User decision , 3 follow up actions are created.
2) Each follow up action has one FM associated with it, which is customised in      SPRO > Display IMG > Quality Management > Quality Inspection > Inspection Lot Completion > Define follow-Up Action .
3) In the first case ( first Follow up action when the inspection is successful) the first FM is triggered. In this FM we have to perform the following steps :
                               a) Determine the Maintenance Order and the equipment.
                               b) Incase both are available, status of equipmnt should be changed to 'A',
                                   Maintenance Order should be changed to 'Technically completed' and
                                   Maintenance Notification to 'Notification Completed' .
If you need further info pls let me know.
Thanks,
Vasuki

Similar Messages

Usage decision follow up action change of status in equipment

Hello every one, I am having calibration scenerio in my project. All process is running properly but the issue which i am having is that when i am giving usage decision i should get a pop up to change the status of the equipment which is not coming in my case. i have checked followup action whch PM_QM there i have activated 2 Funtion modules one is for automatic TECO of order which is working properly and second is change to status in equipment master which is not working for me. Kindly give some guidance to me on same.
Regards
Abhishek

Helloo,
Please let me know the equipment type you are using.
If you are using equipment type other than Q then u may get such type of issues.
Please try out with equipmetn type Q or P
Thanks

Back dated action which is changing the status ' inactive'

hi friends,
my requirement is as below :
i want to insert back dated action which is changing the status as inactive ( currently he is active) .
System is not accepting to insert it and giving the message "   future action exists,check the status"
So for that first i am deleting all future actions and inserting the current action(which is changing status) and after inserting back all the deleted actions.
But the problem is as per the latest records in IT0000 it is showing currently the employee is in 'active' status(as we have inserted back the deleted records).
But i want to make him into 'inactive' status after the current action( which is changing status as inactive) is inserted.
This is my urgent requirement . an anybody respond to this immeadately.
waiting for ur reply.
thanks in advance.

Hi Gajesh,
                 The process is as follows :
1) During Calibration of a product,depending on the technician's User decision , 3 follow up actions are created.
2) Each follow up action has one FM associated with it, which is customised in      SPRO > Display IMG > Quality Management > Quality Inspection > Inspection Lot Completion > Define follow-Up Action .
3) In the first case ( first Follow up action when the inspection is successful) the first FM is triggered. In this FM we have to perform the following steps :
                               a) Determine the Maintenance Order and the equipment.
                               b) Incase both are available, status of equipmnt should be changed to 'A',
                                   Maintenance Order should be changed to 'Technically completed' and
                                   Maintenance Notification to 'Notification Completed' .
If you need further info pls let me know.
Thanks,
Vasuki

Siebel Hangs up when changing the status of service request

Hi,
We are facing this typical problem since last 2 weeks. When closing the SR, CRM hangs for random(unable to detect a pattern till now) SRs.
The steps we follow to an SR is:
1. Enter the SR #
2. Change the status to "resolved"
3. Type the resolution in "resolution" text field and click on white space.
4. A new row gets generated with status "unscheduled"
5. Place a check mark near the newly generated row.
6. Change the status of the SR to "closed"
Now, some SRs get stuck at step 3. When clicking on white-space, CRM hangs.
We've tried everything from clearing IE cache / temp / cookies / increasing temp file size (to 5000 in IE6 and 1024 MB in IE7)
Even set-up a fresh system but no avail.
Even changed the primary internet link to secondary one but no help.
On top of that the SRs which make IE hang seem to be appearing randomly. Sometimes I can close 20 SRs at a stretch and sometimes 1-2 SRs get hanged every 4-5 SRs.
Once in a while an error pops up: "The selected record has been modified by another user since it was retrieved. Please continue (SBL-DAT-00523)"
No one else was working on the SR when such errors came.

You can ave a runitme event or workflow triggered that can generate such behavior.
First increase logging on your object manager (evtloglvl :) ) and look at any error message.
Second assess with your development team what automation has been setup ranging from script, Business Services, workflow to assist you in troubleshooting.
Best Regards
Evtloglvl

Changing the status of appraisal document

dear experts,
I am working in ECC 6.0
I have created an appraisal category and template and want to maintain it for evaluations and released the document
After saving and completing the document, i want to revoke the status from "released " to "non released". I have also deleted all the appraisals thro " transaction -"appchange "
i am not able to revoke the status from released to non released . what is the solution for this issue ?
early reply solicited
nataraj s

Hi
You will not be able to change the templates that have been released. This is a part of the standard functionality.
To unrelease and make the changes execute the following steps
1. Go to transaction phap_admin
2. Delete all the open documents (in process, assigned, etc) corresponding to the appraisal template
3. Right click the appraisal template in phap_catalog and change the status to not release
Judith

Workflow changing the status based some columns value

OOB workflow SP designer 2013
The workflow purpose is change the status columns from
COMPLETE to IN PROGRESS or from
IN PROGRESS to COMPLETE according some columns value.. And if the change is from
IN PROGRESS to COMPLETE
there will be change in some columns like
If alertSOP Date <= today then change the status (Columns value) from Complete to In Progress and send email to the manager (the manager email address is a column (Manager Email)
Else pause until the alert date=Today()
If the status (columns) = in progress send Remainder email every 10 days
If the status change from in progress to
Complete (BY MANAGER MANUALLY) then
last renewed Date =TODAY()
Valid to Review=TODAY() + 4 MONTH
Alert Date=today() + 5 month
and Due Date=today() + 6 months
AND START THE WORKFLOW AFTER UPDATING THIS COLUMNS FOR NEXT cycle
SharePoint List(http://server/site/..) LIST ITEMS
Department
Contractor
Division
Manager Email
Contractor last renewed Date
Contractor Valid to Review
Alert SOPReview
DueDate Review
Status
Workflow Status
ABC
JONAH
10
[email protected]
01/01/2014
05/06/2014
5/07/2014
5/08/2014
COMPLETE
paused
DEF
SMITH
20
[email protected]
01/01/2014
02/03/2014
2/28/2014
3/20/2014
INPROGRESS
INPROGRESS
Note:
The status is changed manually by manager from IN PROGRESS TO COMPLETE
The status from COMPLETE to IN PROGRESS is changed by event or Triggers (based the alert date)

The First Part are coded as follow
(The workflow purpose is change the status columns from COMPLETE to IN
PROGRESS or fromIN PROGRESS to COMPLETE according
some columns value.. And if the change is from IN
PROGRESSto COMPLETE there
will be change in some columns like
If alertSOP Date <= today then change the status (Columns value) from Complete to In Progress and send email to the manager (the manager email address is a column (Manager Email)
Else pause until the alert date=Today()
If the status (columns) = in progress send
Reminder email every 10 days)
Note:
The first if Block work as expected
the second if block generate error.. Internal States Canceled
RequestorId: 3b262286-66e8-5f9f-09f8-3b09c5be0ebc. Details: System.ApplicationException: HTTP 400 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["1"],"SPClientServiceRequestDuration":["1997"],"SPRequestGuid":["3b262286-66e8-5f9f-09f8-3b09c5be0ebc"],"request-id":["3b262286-66e8-5f9f-09f8-3b09c5be0ebc"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"Cache-Control":["max-age=0, private"],"Date":["Tue, 25 Mar 2014 21:25:35 GMT"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext
context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
bookmarkManager, Location resultLocation)

Service Requests in E-Service - Change the status of a request

Hi All,
We had setup a ICSS B2B web for return order management.
We have a requirement that once the service request is created by the User "Customer service representative" he should be able to manually change the status of the request in the web such as " In process" ->"Rejected" or "Approved" ->"Completed.
Please advise on how to proceed with the above requirement.

Hello Yves,
Thank you for this information.
I'd like to tell you that, we are using a shared transport directory and the transport management system is configured properly.
But I think that, changing the status of the transport requests (the field IMPFLG) in the table TMSBUFREQ would be a possible solution, although I'm not sure, if this is the right way.
What I intend to do is the following: change the field IMPFLG ("tp Import Flag") for the transports, which have been already imported, but appear in the import queue with the status "Request waiting to be imported" .
At the moment the field IMPFLG of these transports is set to "1" ("Request waiting to be imported") and I'd like to change it to "2" ("Request already imported") .
Would it work like this? Will the correct status of the transport requests be displayed in the TRX STMS?
Thank you in advance for your help.
Kind regards,
Noémi

Displaying error message on XRPM Portal on changing the status of Project

Hi All,
I want to display an error message on the Portal when user tries to change the status of the Project from 'CREATED' to 'RELEASE' and clicks on SAVE.
I have checked the following BADI's but i am not able to retrieve the newly selected status.
DPR_ATTRIBUTES -> Methods 1) CHECK 2) CHANGE_CHECK
RPM_PROJ_CUST_FIELDS
Any help will be highly appreciated!
Thanks.
Runal.

Hi Runal,
I think, the reason is that the status is not attribute of the project, rather a linked object. That is why the Badi method is not get called.
Please check with the Badi DRP_EVENTS, this Badi is typically called, if the status of object is changed.
Kind regards,
Zhenbo

Unable to change the status of Internal order.......

Hi,
I am trying to change the status of Internal order from Technically completed to Release. But i am getting an error that ---Status REL is not allowed (order 4564564).
We have created this order and till now zero value is used of actual budget means we not used even single amount till now for this order and we want to change the status of order from Tech to REL again.
Is it possible.
Please suggest.
Regards,
R.

Hello,
You can release the Order by the following method:
Go to KO02
Enter the Internal Order name
Go to Control Data Tab
There we have one screen area as Status: there we have one push button(like); click it and from there you can set the staus of the internal order to Released(or you can also change the current status of the internal order)
Please let me know if you I am missing something in my reply.
Thanks,
Anurag Singh Rathore

Need to capture a Status date and keep it unchanged if I change the status

Hi,
I have a task list with multiple status like NOT STARTED, IN PROGRESS, WAITING FOR PROOF, WAITING ON SOMEONE ELSE, APPROVED, COMPLETED.
Now, I wanted to capture the WAITING FOR PROOF date so that I can compare it with TASK DUE date and set if it is "On Due" or Over Due" so I used the following syntax:
=IF(OR(Status="Waiting for proof",Status="Waiting on someone else"),DATE(YEAR(Modified),MONTH(Modified),DAY(Modified)))
This works, but if I change the status from WAITING FOR PROOF to COMPLETED, the captured date is changed to "No" which I do not want to happen. I want to retain the same date captured even if I change the status.
Many thanks,
Vasanth

Vasanth, your issue is because you are using the "modified" field whichchanges anytime you open the record. What you may need to add is a datefield that you control and will hold the date you which to compare against. You could initially capture the "created" date in that field then update it ONLY if specific field changes happen so you can change the Status field without disturbing your date comparison. This would require some calculated fields to update this date field only when it is necessary. Good luck!

Changing the Status profile in QM

Hi,
The status profile (QM_L_001 - Inspection lot profile1) in the Quality Inspection Lot is been manually entered and saved.
This has set the User Status as IMAT: Material is not correct.
Due to this, unable to do any of the further processing.
In QA02, the Status Profile cannot be changed/deleted.
So how to remove the Status Profile from the Quality Inspection Lot?
Request your help.
Regards,
Sankar.N

Hi
An other workaround, you can go to the transaction BS02 and change the status profile to allow the status can execute the following actions temporarily.
Leon.
Regards.

Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

Hi
Using SPD i am creating list workflow.
Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
Please help me for automatic process.
What i should do to change the status to "Complete" automatically after manager approval
Regards
Jhanani
Janani.R

Hi Janani,
From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
we should be able to see the Approval task’s status.
Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Is it possible to change the status from Bid Rejected to Bid submitted?

Hi there.
We are working in SRM 4.0.
One user rejected a bid, but it was a mistake. Is it possible to change the status from Bid Rejected to Bid submitted?
We would like to modify the status from Bid Rejected to Bid submitted or Awaiting Approval to Bid submitted in order to solve errors.
Thanks and regards.
Raúl Moncada.

Hi ,
Use Function Module : BBP_PD_BID_STATUS_CHANGE
Supply Activity = 'QOSU' .
Regards,
Sachin S M

Error in CV02N while changing the status.

Hi Experts,
We are getting a error while changing the status of technical change document that " Inconsistent characteristic value assignment" .The document is in status "in use" and we are trying to change it to " old version" using T code CV02N.
when I tried to see the error desription it is telling that delete the inconsistencies. But I didn't find the list of incosistencies. What may be the problem? Please help me out to get ride of this problem.
Thanks and best regards,
Praveen

Hi Pete,
The full text message: Inconsistent characteristic value assignment
Message no. C1821
In diagnosis it is telling that "You want to change the value assigned to a characteristic. However, the change causes inconsistency, so the new value is not allowed."
Actually I am just changing the status of the document. I am not changing any characteristic value.
Actually it is appearing as information message. but while saving it pop up and not allowing to save.
Please do the needful.
Best Regards,
Praveen

RE: Mail notification on changing the status of the spport desk messages

Hi,
I am facing problem with the automatic mail notification in service desk configuration.
When i create a support desk message in the satellite system, the message appears in crn_dno_monitor in solution manager. When i change the status of the message from new to in process, i get a mail only with the subject line "MESSAGE IN PROCESS STATUS' and the pdf attachement (sapscript) is missing. I have checked all the configurations in SPPFCADM but i am not able to figure out the problem. Please help me out of this problem.
Regards,
Sowmya

Hi,
there is a SAP Note with a tutor for send_mail via action. See Note 691303 and the attached .zip-file.
It shows step by step how to set it up and is a very good tutorial. You'll need additional (free) software to let it run.
Regards,
Dirk
@Sowmya: what content does the mail have? None? There is a possibility in SolMan where you can choose whether you want the content as a .PDF-Attachment (which, in my eyes, isn't that sparkling) or as regular mail text.
It is located in TA SCOT. Double klick on "SMTP", then klick on "Internet" and there choose in the Drop Down Menu of Sapscript. When you have trouble, look at my [screenshot|http://home.arcor.de/dirk.malas/solman/Mail_TXT_PDF.JPG].

Changing the status of Equipment in a follow up action

Similar Messages

Maybe you are looking for