Change to Cluster

Select the Controls or Constants and Select Change to Cluster to make it a cluster of selected elements.

 Duplicate of http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Create-cluster-out-of-selection/idi-p/2849900

Similar Messages

  • Change a cluster element value

    I have an array of clusters and each cluster has dozens of controls in it. I want to go through all the array clusters and change the value of a specific control. Right now, I am using the value property node of the array to get a 1-d array of clusters, looping through it, unbundling each cluster, change value of one element, bundling it back into a cluster, and then giving it back to the array using the value property node again. This works fine but maybe there is a simpler way to do it. With the current method, it is probably using more RAM too because it has to copy all the data.
    Message Edited by abdel2 on 12-24-2008 11:44 PM
    Solved!
    Go to Solution.

    (Please always attach an actual VI. It is very difficult to troubleshoot or edit a code image. )
    Anyway, your use of value property nodes is completly misguided here, they just introduce additional overhead and complicate the code! Why???
    All you need to do is (1) read fom the input terminal, (2) modify the array element using "replace array subset", and (3) write the result to the output.
    If you want to also write it back to the control, use a local variable.
    (Depending on the rest of the code, you might also want to keep the array of clusters in a shift register.)
    Message Edited by altenbach on 12-25-2008 10:12 AM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    ModifyCluster.png ‏7 KB

  • If hostnames need to be changed in cluster?

    Hello -
    I have a cluster in a test, and we need to get the hostnames of the boxes changed. How can this be handled without a full deinstallation? Would nodes have to be removed, then added back into the cluster?
    Thanks,
    Mike

    Hi Mike
    Yes seems so see that FAQ on RAC on Metalink Note 220970.1 RAC Frequently Asked Questions:
    Can I change the public hostname in my Oracle Database 10g Cluster using Oracle Clusterware?
    Hostname changes are not supported in Oracle Clusterware (CRS), unless you want to perform a deletenode followed by a new addnode operation.
    The hostname is used to store among other things the flag files and CRS stack will not start if hostname is changed.

  • Changing MS Cluster Group name for ECC 5

    Hi,
    Is it safe to change the MS Cluster Group name for ECC 5 cluster after installed?
    If not is there a safe way to do it?
    Thanks in advance,
    Roey

    Hi Roey,
    There must be no problem in renaming th cluster group
    Please refer to follwoing link:
    http://www.eggheadcafe.com/software/aspnet/32064632/rename-exchange-cluster-g.aspx
    The procedure of doing is mentioned here
    http://technet.microsoft.com/en-us/library/cc757533.aspx
    Make sure you keep following points in mind:
    1. Make sure you have a full backup of SAP
    2. Bring cluster groups offline and then rename them and then bring up the cluster group
    I hope there will be no issue
    Rohit

  • Change payroll cluster

    Hello Experts,
    I have a payroll cluster table for which results are already posted. Is there any utility report in SAP to correct value of an entry of RETP table?
    Thanks,
    Samir

    Hi ,
    It is a cluster table specific to NewZealand payroll. PC43S. There are no changes in terms of data base structure, But this strcutre is used to create SALSAC cluster table.  Some fields do not have correct sequence and i would like to change this sequence. This can done using RPUGDF00 program but the issue is that old payroll results then becomes unusable and all Import routines will bomb. Hence, I want to write a report whcih can do conversion from old strcutre to new one.
    Can someone help?

  • Unbind don't replicated changes on Cluster

    I'm running Application Cluster with OC4J 9.0.3, with Aplication Context replication using RMI. Lookup, Bind, and Rebind work ok, and changes are replicated to all nodes in Cluster, but Unbind don't replicate state, it works only local on node where was unbind.
    I try OC4J 10g, and it work correct also for unbind.
    Can you help me how unbind might work on OC4J 9.0.3?
    Thanks.
    Robo.

    Maybe you could file a bug and provide a test case.

  • Don't Delete My Elements when I change my cluster style

    See the picture below for an example of (what I consider to be) a frustrating "feature".
    Why delete the elements? Keep the elements and the element style types as is, just convert my cluster to the new style type.
    Arrays also do this, but since we tend to spend more time designing clusters, it's far more frustrating than arrays.

    I know the thread was linked to already, put to draw more attention to this I made a VI that should "Modernize" front panel contols in a VI.
    http://forums.ni.com/t5/LabVIEW/Replace-cluster-bug/m-p/3148093#M906580
    It works with Clusters and arrays replacing them, and their contents.  The code could be modified to just replace the cluster or array style leaving its contents, but the intent for me was to use it on API VIs that never are seen by the user, so replacing them all with modern was what I wanted.
    Still Kudo'd

  • Changing Hyper-V host and cluster virtual IP addresses to new subnet/VLAN

    I have a 2 node Hyper-V 2012 R2 failover cluster, managed by System Center Virtual Machine Manager 2012 R2, and I would like to change the IP addresses of the hosts and the cluster, in order to move them to a new subnet and VLAN. The existing and new subnets
    are able to route to each other so all hosts will still be able to communicate throughout the parts of the process where they may be on separate subnets. There is also a dedicated cluster heartbeat network on its own subnet and VLAN that I am not altering
    in any way.
    The 2 hosts are configured with 4 nics in a team, with dedicated virtual interfaces for each of the following:
    -Live Migration
    -Cluster Heartbeating
    -Host management/general traffic (the cluster virtual IP address is also on the same subnet as these interfaces).
    It is the host management/general traffic addresses that I want to change. The interfaces were created and configured with the Add-VMNetworkAdapter, New-NetIPAddres and Set-VMNetworkAdapterVlan commands.
    Please advise if the following process is correct:
    1) Evacuate all the VMs from the first host to be changed and put it in maintenance mode.
    2) Use Set-VMNetworkAdapter to change the name of the interface (the current name refers to the VLAN it's on)
    3) Use Set-NetIPAddress to change the IP address and gateway of the interface as appropriate
    4) Use Set-VMNetworkAdapterVlan to set the VLAN ID
    5) Take the host out of maintenance mode and move all VMs off the other host
    6) Repeat above steps on the other host
    I know that I will then need to change the cluster virtual IP address, but I have no idea how to do this or where to look for that setting. Please advise!
    Cheers.

    Hi new_guise,
    For changing cluster node's IP address please refer to the link below :
    https://support.microsoft.com/kb/230356?wa=wsignin1.0
    For changing VIP please refer to this article :
    http://blogs.technet.com/b/chrad/archive/2011/09/16/changing-hyper-v-cluster-virtual-ip-address-vip-after-layer-3-changes.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Programmaticly change cluster size

    I'm i'm facing the following problem, i want to display several plots in a chart, to do this i'm using a build to cluster function, because the source is an array with N items. The sollution i came up to, was not correct because the cluster has a fixed size and the array doesn't. Which results in 9 plots (default cluster size) and only N of them have to be displayed in the chart.
    I included a part of my program. By which i hope it explains my problem a bit more. This subvi is executed X times and saves N value's to an array and after each run the array is converted into a cluster and is displayed in a chart.
    So my question is, is it possible to programmatically change the cluster size, or is it possible to realise a chart which is updated during runtime with new value's.
    Attachments:
    Wavelength AnalyseAndSave.vi ‏208 KB

    I figured it out by myself, havn't slept to mutch last night For those who are interested in my solution, here is what i did after the array is coming out from the forloop i reshaped it so that the dementions are the same as the number of plots i want to have, then i wired the output to a chart and it works

  • Failed to start SQL SERVER cluster after port changed from 1433 to 61433

    Hi
    Today, I did Geo SQL2012 Cluster installation with with 2 VIP different subnet. Currently i'm getting problem in changing default port 1433 to 61433, after changing port Cluster group not coming up, SQL Failing. I don't know and not sure, if SQL
    service is depend on Port. Please help us , its producion issue.

    How you change port ,Changing Port in clustered environment required different procedure. You need to run the command of remove checkpoints and add checkpoints.
    See below links
    Remove-ClusterCheckpoint
    http://technet.microsoft.com/en-us/library/hh847295.aspx
    Add-ClusterCheckpoint
    http://technet.microsoft.com/en-us/library/hh847255.aspx
    --Please mark this Answer if it helps to solve the issue

  • How to change cluster-elements used in subvi´s automatically?

    Hello,
    I have a Array of Clusters and a lot of SubVIs using this Cluster. If I change the Cluster ( f.e. thorugh adding a new INT-value to it), I need to go in all of my SubVIs and also do the same changes there. There must be an easier way to do this, but I was not able to find it out. I tried thorugh refernece, but it didnt work :-(    I was also not able to find a solution here in this forum.
    Can somebody help pls?
    LabVIEW 2011
    Solved!
    Go to Solution.

    Serdj,
    I am not sure if this is your problem, but have you tried type defining the cluster?
    Look here http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/creating_type_defs/
    regards,
    aCe
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

  • Change cluster node's hostname

    Just install a 4 node RAC cluster with 11gR2 infrastructure (cluster + asm), 10g RAC and 11g RAC database. Then customer told us to change the cluster node IP and hostname.
    According to metalink (220970.1), it requires to reinstall the cluster.
    Wondering is there any alternate way to rename cluster node's IP/hostname?

    Hi user5544520,
    as far as I know it is not supported to change your hostname with CRS.
    You will have to remove the node from the cluster.
    Change hostname and do other necessary changes.
    Add node to the cluster.
    There are lots of documentation available.
    Look at the following:
    http://www.pythian.com/news/482/changing-hostnames-in-oracle-rac/In above mentioned blog they say:
    If you are brave enough, there is another way to do this.
    It’s not described anywhere on the Metalink, but there are no major hacks needed to implement it.
    The idea is to simply re-run the configuration of CRS (including re-formatting OCR and voting disks) and re-create the CRS resources after that.
    Obviously, this is not an online operation and the whole cluster is down for the duration of rename.Hope this helps.
    Edited by: user11150436 on Oct 29, 2010 4:09 PM

  • Main Front Panel Cluster reference in Sub VI

    If I create a reference to a cluster and then create a Sub Vi,  I can change
    the cluster variables from the sub vi. All works well - Until I modify the Cluster.
    This breaks the sub vi with a wire class error. Can I fix this ???
    Solved!
    Go to Solution.

    Hi Ben,
    You got a broken wire just because you used a property node for strict type definitions (not for generic). The VALUE of the property node that you used includes the information of cluster data type.
    My suggestion is to use a type def cluster, and use this cluster constant for "Variant to Data" in subVI. By using this type def cluster, you do not need to modify the main part of your subVI. You only need to change the unbundle item when you add/remove new element of the cluster.
    Attachments:
    LV Ref.zip ‏18 KB

  • WWW service is not able to start via Microsoft Failover Cluster generic service resource

    Environment
    Cluster Nodes = two
    Cluster Nodes OS = Windows 2008R2
    Application = IIS
    Query
    I created generic service resources of many windows services under Microsoft Failover Cluster and they are failing over successfully but when I create a generic service resource for WWW, then the WWW service is not able to online
    via Microsoft Failover Cluster. It stuck in online pending.
    I have noticed two things.
    1.) If the WWW service is set to manual and started at passive node and I manually restart the Active node then the WWW service successfully switch over to stand by/passive node. but if the WWW service is set to
    manual and not started on stand by/Passive node then the WWW service is not failing over.
    2.) if I kill the WWW service manually (as a test case) on Active Node via this command (taskkill /f /pid XXXX) then the WWW service failed and is not failing
    over to standby/passive node.
    Any comment will be appreciated. Thanks. Zahid Haseeb.

    The problem is resolved. I feel that it will be helpful to other people who may face the same problem which I faced, so I wrote a blog on "How to configure IIS Web Site and Application Pool in Microsoft Failover Cluster" and mentioned almost all activities
    which I have done. Kindly see the resolution under section "Configure some changes in Cluster Configuration" in the below link
    http://zahidhaseeb.wordpress.com/2014/02/12/how-to-configure-iis-web-site-and-application-pool-in-microsoft-failover-cluster/
    Any comment will be appreciated. Thanks. Zahid Haseeb.

  • Change CMS Name in BO 4.0

    Hello,
    We are running with SAP Business Objects 4.0 SP04 Patch 09 in Production enviroment. We are having 3 cluster nodes as per below configuration:
    1. server1.domain.local
    2. server2.domain.local
    3. server3.domain.local
    Environment:
    SAP BO : 4.0 SP04 Patch 09
    OS : Windows 2008 R2 Enterprise
    DB : MS SQL 2008
    Name of Cluster is server1.domain.local, and on this node only CMS services are running, rest all the SIA services are running on server2 and server3.
    We have DB hosted on server1 node, now we need to remove the SAP BO services from server1 and, make server2 as cluster name. So that we will have SAP BO services running on only 2 node i.e. on server2 and server3 and only Database will reside on server1.
    I have gone through with the SAP Note 1219823 - How to change the cluster name of a Central Management Server on Windows, but this is for old release.
    Can you please help to provide few pointers, or steps for this.
    Many Thanks,
    Kshitiz

    Hello Denis,
    Many Thanks for your reply.
    I'll follow the steps for changing the Cluster key.
    As per below thread, do we need to change anything in BO Web applications also ?
    how to change CMS name
    As I understand correctly, I'll remove SAP BO services (un-install) from server1.domain.local, and then point the server2 and server3 CMS Cluster Key to Server2 only.
    Regards,
    Kshitiz

Maybe you are looking for

  • Lockbox BAI2 - EDI 820 Payment Advice

    Hello All, Thanks very much for your time. We currently have lockbox with BAI2 format file coming in from the bank for all our customers. As an enhancement, we want to implement lockbox payment advice to come directly from the customer through EDI 82

  • Sort lookup column A to Z

    Hi, I have a list with 3 lookup columns to other lists. When in quick edit, and entering on of the lookup column, when i start to write, the order of the auto complete is not A to Z and it's very hard to find the relevant value. In 2010 it was sorted

  • Is it possible to have a custom downloaded text/ringtone?

    I want to download a ringtone and use it but it doesn't look like that is possible. Is it?

  • Mirror agent & failed logout-- HELP!

    There are a lot of other discussions on this topic, and many people seem to be familiar with the mirror agent failing to quit and freezing up the logout process, but I have been researching these discussions and the only one that had any tips was so

  • Non Stock Materail with Inhouse Production

    For raw material with category nonstock and procurement type inhouse production. when we run MRP and check in md04 for that material; what would be the result of such combination. Can any one please explain in detail. In what scenarios is this used.