Unbind don't replicated changes on Cluster

I'm running Application Cluster with OC4J 9.0.3, with Aplication Context replication using RMI. Lookup, Bind, and Rebind work ok, and changes are replicated to all nodes in Cluster, but Unbind don't replicate state, it works only local on node where was unbind.
I try OC4J 10g, and it work correct also for unbind.
Can you help me how unbind might work on OC4J 9.0.3?
Thanks.
Robo.

Maybe you could file a bug and provide a test case.

Similar Messages

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them as the area is just left blank! Nothing has been done to have changed this?

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can.

Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...

Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...

The main settings that are changed in these cases can be found in this article:
http://support.apple.com/kb/ht1386
To ensure you don't lose any data you don't want taken off, ensure that each Summary, Apps, Music, Movies, TV Shows, Podcasts, iTunes U, Books, & Photos have the settings you would prefer on the computer.
If anything gets changed on any of those pages, you will be prompted with that message. If they look fine, especially after adding some media like songs or videos, then you can apply the changes without fear.

Change to Cluster

Select the Controls or Constants and Select Change to Cluster to make it a cluster of selected elements.

Duplicate of http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Create-cluster-out-of-selection/idi-p/2849900

My safari 7.1 don´t apply changes, so pop ups and allow indesirables webpages

my safari 7.1 don´t apply changes, so pop ups and allow indesirables webpages

Try downloading and running:
Adwaremedic: Removes all known adware from your Mac

How I do remove or change pass of Remote Lock (Ipad) ?? I put 1234 to test, but I don't know change.

How I do remove or change pass of Remote Lock (Ipad) ?? I put 1234 to test, but I don't know change.

Go into Settings > General > Passcode Lock (you will need to re-enter the code to go into it) and you can then either Change Passcode or Turn Passcode Off

Don't Delete My Elements when I change my cluster style

See the picture below for an example of (what I consider to be) a frustrating "feature".
Why delete the elements? Keep the elements and the element style types as is, just convert my cluster to the new style type.
Arrays also do this, but since we tend to spend more time designing clusters, it's far more frustrating than arrays.

I know the thread was linked to already, put to draw more attention to this I made a VI that should "Modernize" front panel contols in a VI.
http://forums.ni.com/t5/LabVIEW/Replace-cluster-bug/m-p/3148093#M906580
It works with Clusters and arrays replacing them, and their contents. The code could be modified to just replace the cluster or array style leaving its contents, but the intent for me was to use it on API VIs that never are seen by the user, so replacing them all with modern was what I wanted.
Still Kudo'd

Web modules don't get deployed to cluster instance directory

Hi,
I have a domain with one cluster, which has one instance. Sometimes (!), the web aplications I deploy don't get unpacked in the directory {instanceRoot}/applications/j2ee-modules but only in {domainRoot}/applications/j2ee-modules. When that happens, they don't work and I cannot access them through their URL.
I deploy them using the web admin console, enable the to the cluster in question. Everything goes ok (or at least the UI says so) and in the domain.xml I have this:
<web-module availability-enabled="false" context-root="/myapp" directory-deployed="false" enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-modules/myapp" name="myapp" object-type="user"/>
<server...
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="myapp"/>
<cluster...
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="myapp"/>
In both the apps the were copied to the instance applications dir and in the ones that remained only in the domain applications dir (and do not work). In the latter, the location dir does not exist.
Anyone has gone through any similar situation? This deployment process is a bit confusing for me, wrt instances, clusters, domains etc.
Thanks!
Jo�o.

Thanks for the answer.
But how is this mechanism controlled? Sometimes, the domain just doesn't seem to propagate the changes to the cluster instances (or stand-alone instances). For example, sometimes when I change a property of a data source through the admin gui of the domain, it does not get propagated to the desired instance config, even after restarting the whole system.
I think that it may have something to do with the manual changes that I have to do sometimes in the domain.xml file (this is neede when you have huge config changes to be replicated in many servers).
Is there any option to enforce the replication of the config from the domain to the instances? Or at least to make it verbose so that I can realize what is going on underneath.
Thanks.

Change payroll cluster

Hello Experts,
I have a payroll cluster table for which results are already posted. Is there any utility report in SAP to correct value of an entry of RETP table?
Thanks,
Samir

Hi ,
It is a cluster table specific to NewZealand payroll. PC43S. There are no changes in terms of data base structure, But this strcutre is used to create SALSAC cluster table. Some fields do not have correct sequence and i would like to change this sequence. This can done using RPUGDF00 program but the issue is that old payroll results then becomes unusable and all Import routines will bomb. Hence, I want to write a report whcih can do conversion from old strcutre to new one.
Can someone help?

Why don't the changes to my playlists and new songs (except the ones I buy from the iTunes store that automatically download onto my iPod) always sync to my iPod Touch 4th Generation?

I haven't yet tried it in iTunes 10.5.3 (I'm downloading it right now), but I don't expect that Apple has fixed the problem, if there is one. I have it set to automatically sync my music and sometimes it will work, usually when I make large changes. To overcome this, I have to unselect the (a?) playlist from the music sync for my iPod, sync it, reselect the playlist, and sync it again. It's very annoying to me. This problem exists whether I sync it with a cord or wirelessly. I have it set to backup on my computer (last generation MacBook (2010), base model, OS X 10.7.2).

.

Pages don't reflect changes in their master page

I'm using InDesign CS5.5 (v. 7.5.3) with Mac OSX 10.8.4. I found one old question about this problem in another forum (with no submitted answer):
Assume you have a simple document with one master which simply features a text frame. Well, now if you add some inset spacing to the text frame on the master, this is immediately reflected on the pages to which the master had been applied. However, if you edit the master again and set the inset spacing back to zero, the text frames on the pages to which the master had already been applied keep the inset spacing. If one adds new pages, the text frames have no inset spacing, as I would expect. Can someone tell me why InDesign behaves this way... i.e., why are the changes to the master not reflected on the assigned pages when I set the inset spacing back to zero.
This question was asked re CS 2.0. The problem seems to remain in CS 5.5.

I made the changes to the frame inset in the master pages. This is a normal setting for frames, and not complex--and in any case, the point was that I had mistakenly set an inset value, but wanted to reset it to zero, so really nothing to create as an object style. So I reset the value to zero in the master pages. No update. I tried reapplying the changed master page to the doc pages. No update.
You note: "And if you reset the text frame in the Master it won't reflect in the pages."
Is this a known feature/bug? Why shouldn't inset values be part of master text frames and thus updated with them? It doesn't make a lot of sense to me.
Thanks for the suggestion about object styles, though. I don't think it applies here, but I can see the usefulness elsewhere, and I've never really looked at them.

Please help - keywords don't always change with image ?

Hi, I have tried to search for this but not found it. ( I am not sure which words to search on and the ones I have tried haven't shown it ) I am being driven mad and probably doing something stupid to cause it. Sometimes I can get into a state where the keywords on the right of the library screen in the keyword tags box, do not change when the image changes. I cannot work out why and neither can I find any pattern. I know the correct keywords are there because I can see them in bridge and also if I close lightroom and reopen, it shows them. If it makes any difference I have preferences set to automatically write changes into xmp. I am using windows xp. The filename in the metadata box below does change and follows the image, yet I do not even see keywords from the correct folder. I have no filters set.
Please does anyone have any ideas.
thanks,
Richard

I don't know whether this is the same bug or not (though it surely is a bug). Every once in a while, the image in the navigation window will not be the same as the image in the loupe view. It's very strange. You can still navigate around the zoomed image with the navigation box, but the box is overlayed on a different image from the one you're looking at. When this has happened, I've tried to fix it by switching images, but that never works.... the same image stays in the navigation window. I have found that the only fix is to restart LR. Perhaps this is related in the sense that maybe there's some kind of pointer problem in which different parts of the program are pointing to different images.

Checked in documents don't retain changes in AC 1.3

Since upgrading to Apple Configurator 1.3, I've noticed that documents that are changed after a supervised device is checked out don't keep those changes when the device is checked in. This was not the case in AC 1.2, where you could assign a document to a user, check out a supervised device to that user, then -- after the device is checked in -- export the marked up document (saved to iTunes) to the host computer (running OS 10.8.4) with all the changes intact.
I've looked for a thread on this problem, but with no success. Also reported the issue to Apple, but received no reply. Anyone else with the same experiences or a possible workaround?

Thanks for the input!
Restarting the computer was the obvious first thing to try, but had no effect.
I have over 2GB free memory and still experiencing the issue.
It does take a few seconds to load the Live View for the first time, but that's not my problem. My problem is that with Live View already loaded, it takes over 30 seconds after saving changes to the php file before I can see the changes in the Live View (I'm clicking the refresh button once a second, and on the thirty something time I'll finally see my changes).
With "Preview Using Temporary Files" turned off, I get the behavior I've been describing.
Turning "Preview Using Temporary Files" on does actually mitigate the issue for me, though, so thank you for that suggestion!
     - I can see changes in my Live View instantly after saving and clicking the refresh button.
     - I can see changes using Preview in Browser instantly too... but the browsers refresh button has no effect (which makes sense since the temporary file it's looking at hasn't changed).
     - I can actually get some work done now.
However, I still feel that I should be able see my changes in Live View immediately after saving and clicking the refresh button without using "Preview Using Temporary Files", and I'd like to be able to leave the page open in my browser and just click the browser's refresh button to see my recently saved changes instantly.
So Long Story Short:
     Using "Preview Using Temporary Files" has definitely helped!
     But I still have no way to see my changes immediately without using temporary files, so something still seems fishy.

Don't allow changing documents in CRM after replication to R3

Hello,
We have applied the scenario A for the replication of sales orders in our client. So, this means that the orders can be replicated in both R3 and CRM system and all the changes are replicated. SO, the orders are always consistent in both systems.
Nevertheless we would need to apply a different scenario for the replication of complaints as Return orders. We would need to implement the following scenario:
1.- Creation of complaint in CRM
2.- Replication to R3 if the complaint is free of errors
3.- Leave the Complaint in CRM unchangeable for all the users.
4.- The return order should be modifiable in R3 and all the changes made FROM R3 should be seen in CRM. (Changes/Delivery number/Invoice number... , etc.)
Could any one let me know how could we apply this scenario? We are working with CRM7.0.
Thanks in advance,
Regards.
Edited by: yoli_vd on Nov 24, 2011 3:16 PM

Hello ,
normally the User status behaviour (as recommended in the previous msg) will work. In case you do not want to add any user status then you can do a little ABAP in the AUTH_CHECK Badi and put control on the System status which is in any case maintained automatically.
after the document is distributed to ECC, there is a specific status set. you can refer tables CRM_LINK, CRM_JEST, CRM_JCDS to understand the behaviour and then put little condition in the AUTH CHECK badi.
hope this helps.
rgds

Unbind don't replicated changes on Cluster

Similar Messages

Maybe you are looking for