Change work center
Hi all,
Please excuse my ignorance in what is probably an easy operation.
What is the transaction code for changing a work center that a production order is setup default to be completed in?
For example if i have product 'A' that is usually completed in work center '1' but I want to change the data so that next time and every other time I create this product it identifies work center '2' on the production order.
Hi Gman,
For producing "Product A" currently you are using work center 1. Instead of using this work center 1 you want to use work center 2. To change the work center, you need to change the routing for the "Product A". Go to CA02 and enter the material and select the routing and press operation, in the operation you will see the work center 1. Change the WC1 to WC2 and save it.
After changing this, when ever you want to produce "Product A", system will select WC2.
Hope it clears your doubt. Revert back if you have any questions.
BR / US
Similar Messages
-
Bapi for change work center data
HIi All
I need BAPI to change work center data for all categories and work center change transactions .....IR02 ,CNR2,CR02.
Thanks in advance .Hai,
Try the fm CRAP_WORKCENTER_CREATE
BAPI_BUS2054_CHANGE_MULTI
CRAP_WORKCENTER_CREATE
Regards,
Venkat -
PM Order - Change "Work Center" on operations to "Main Work Center"
Hi Experts,
We have prepared a tool for client, which create Maintenance Plan and order in the background.
The order created is having "Main Work Center" defined at header and "Work Center" at the operations level. In the current scenario the "Main Work Center" and "Work Center" are different say 'ABC' & u2018XYZu2019.
Client has the requirement that work center maintained at operations should be same as the main work center.
We need to implement the solution to take care of work center to be same as main work center while creation of the order in the background.
Has anyone worked on the similar requirement before?
I checked for existing USER EXITS for IW31/32/33 and found only one IWO10012. This doesnu2019t seem to be much useful.
Please suggest any possible solution.
Thanks,
Ankur SharmaHi Tilak,
Thanks for the response. The current situation is that we are creating the order in background using the Z-program. The scenario is creating order with operation entries having work center not equal to the main work center.
I am not functional, so just talking in terms of technical terms.
Is there a way the work center at operation level can be changed to main work center in background?
Thanks,
Ankur Sharma -
Change Work Center during production order confirmation
Dear All,
I must to modeling this situation:
I created an production order. In routing I used an work center A.
After I confirmed a half of quantity, the work center A was damaged and I must to change it, with the work center B.
The system allow this change, but when I checked the costing, the situation isn't real. The system counted the costs just for the work center A, and no for work center B.
My question is: it's possible to change the work center, during production order confirmation and the costs updated with new cost?
Thank you for your answer!
Regards,
Marianonce a Order is released, the Process order detaisl for that order is frozen.
however if you want to do it, change the order status to CRTD after reversing the Movements done.
Do READ MAster data , this will copy the new Work center , redo the previously done Moevements.
if the change is long term.
or
Just manually add the new work center and do the processing. if the change is temporary. -
Change Work Center on a Prod. Order
Hi,
I have been searching through the archives and found a lot of maybe, but no final ideas.
How do you change a Work Center on a Prod Order?
Anybody has a suggesfull way of doing it?
Thanks
AndyAndy,
Try using BAPI_ALM_ORDER_MAINTAIN. The documentation states this BAPI is for maintenance orders, but we have used it to change the bill of materials and other parts of the production order.
Glenn -
Changing Work Center in PM Order Operations
Hi PM Experts,
We got two companies operating in the same SAP client. But user are properly restricted with Authorizations in terms of company codes, maintenance panning plant, maintenance plants etc, etc,
But I noticed that in IW32, in work order operations users belonging on to one company can select(F4) work centers/maintenance plant from the other company and save orders.
I was under the impression that org level authorizations block this. Is there a way to stop this? provision of the the relevant authorization object in this regard will be a great help.
thanks in advance,
Cheers
DeepalHi
Please check the below link. may useful
[http://help.sap.com/saphelp_470/helpdata/fr/a5/3eca044ac011d1894e0000e829fbbd/content.htm|http://help.sap.com/saphelp_470/helpdata/fr/a5/3eca044ac011d1894e0000e829fbbd/content.htm]
Regards
Seenu -
Mass change of work center in production order
Dear All,
Is it possible to mass change work center in production order, i.e. i have around 100 production order of which i have to change the work ceter assigned in particular operation .
Thanks and regards
ManishHi Manish,
If you have not posted any activity or goods to the production order, then in header click on Functions -> Read PP Master Data.
The order will now read the routing with the new work centers, provided the same has been changed.
If you have posted some activities or goods movement done, then its a manual process.
Hope the above answers your query.
Regards,
Vivek
Added
If in case you have posted some goods or confirmed some activity, check if you can reverse the same, re-read the routing & then post back the goods.
Edited by: Vivek on Feb 24, 2009 12:22 PM -
Work Center Changes need data for previous and new work center
Hi All,
I have a requirement as the organisation is going through RESTRUCTURING. In ECC in Plant Maintainance they are changing Work Center. E.G.
Work Center OLD : ABC
Work Center NEW : XYZ
Now the requirement is I have data for ABC already coming in BI Prod. Env. Now when they will change ABC to XYZ the new data will come for XYZ.
Reporting Reqmt:
Data In Cube
Work Center No. of Maintainence Orders
ABC 10
XYZ 20
When user run the report it should and gives input in Work Center variable as " XYZ" then
XYZ -- 30
Presently it is showing
ABC --10
XYZ --20
They have list of OLD Work Center mapping to NEW Work Center.
Now, Can anyone tell me is it possible to achive this scenario.
Thanks,
MayankHi,
find the below link it has similar issue ,
Re: mapping between old/new material codes in BW
Regards,
Satya -
Dear all,
Ex- Reactor is main work center main , under this we r having different type of reactors like R1,R2, R3
my client want to maintain main rector(work center) in master recipt, and they will take a perticular work center decision at time of creation of process order. means they will change work center reactor to R1 or R2 as per avaibility of machin
I suggested, Initially sytem copy std. master recipt in process order , then u will make a changes of work center at process order lavel as per you requirement.
Is it ok suggetion ? or do u have any different idea?
Kindly let me know
thxDear,
There is one more way to incorporate such requirement.
Create additional master recipes which includes different work center.Then create different production version to incorporate that different master recipe and work centers.
Now at the time of production release or creation do the selection of required production version as per the work center availability.
Regards,
Dhaval -
Urgent : Automatic Selection of work center
Dear All,
Good Morning,
please provide me valuable input to accomplish the business scenario,
the scenario is
1.There are 16 NC T-Bending Machine with different capacity.
2. The Client wants to select the workcenter automatically if the 1st workcenter is overloaded i.e 2nd workcenter should be selected by the system
Again,if 2nd workcenter is overloaded then system should select 3rd workcenter and so on..
How I can make it possible.
I am trying the Alternative sequence ,will it works to achive the requirement .
please give ur valuable inputs.
Thank in advance,
Vijay MankarIn capacity leveling transaction, enable "date entry when dispatching". Then, every time you dispatch operations, you will get a pop-up for date entry. Luckily, this pop-up also has a field for work center - so you can change work center also (with or without date changing).
We are using this method extensively. Start transaction with all the work centers that you want to be considered. Then, just select all the orders and dispatch. In pop-up, change work center to the next in list. So, some orders will get dispatched to that work center, and after its capacity is fully booked, the balance orders will fail to dispatch. Once again, select all orders (left in the order pool) and dispatch, and change work center in pop-up. You will have to do this as many times as the list of work centers OR till all orders are dispatched (whichever occurs first). Takes just about a minute per work center and works perfectly.
- Chetan -
Dynamic work center assignment
Hi,
In our process for each process (operation) there are more than one physical work center.
The assignment of the order to each work center is decided only at the time of operation execution.
How can we map this scenario?
Can we change the work center during the confirmation at operation level?
Regards
RamakanthDear Ramakanth,
1) Yes , when you enter order number & operation number, system will pick the work center
from Prd order in CO11N
2) Now just change the work center as required, system will not stop you
3) coming to costs, Variance will be calculated for changed work center
Regards
Madhu Kumar -
Hi,
In production order of 10 EA, I have two operations. operation 0010 on work centre T1, operation 0020 on work centre D1.Co11N is done for operation 0010 for 4 EA.
Now rest 6 Ea of first operation has to be done on work centre T2 ( because T1 is brokedown).
Pls help how to map this? Else is there any option to enter a new work centre( work centre T2) in CO11N screen during confirmation?
Regards.Hi,
As we know there is possibility in routing to have alternavtive sequence & parallel sequence along with standard sequence. But there will be one work center always associated to single operation. And as you explained, this change in work center for operation 0010 for 6 quantities was happened due to breakdown for work center T1.
For work around you can do one thing, for first 4 quantities do the confirmation as per planned work center i.e. T1 (as per routing data). Now go to change production order, change work center T2 from T1 for operation 0010. Now the confirmation for remaining 6 qauntities will happen against T2 work center.
Now whenever you fetch report for confirmation to that production order, it will always shown two confirmations for operation 0010 with 4 qty -T1 work center & 6 qty - T2 work center. I hope this will slove your problem. Coz change in work center was very uncertain due to breakdown, not a regular one. If it is regular, you can map with sequencing in routing.
Regards,
Sandeep. -
CNR2 HR Assignment - Work Center Description
Hello,
We use CNR2 to maintain work centers. In the "Change Work Center: Basic Data" section I am able to change the description of the work center. I then click the 'HR Assignment' button at the top of the screen and notice that the work center description located above where the 'persons' are assigned does not get updated. Is there a separate location where the work center description must be maintained?
Thanks,
JordanI figured it out. Transaction code PO01 can be used to update the work center description for the HR assignment.
Thanks,
Jordan -
Changing operations work center during creation of PM order
Hi all,
I am looking for BADI or EXIT in order to change operationS work center which created from maintenance calls.
Does anyone know such possibility?
AssafAssaf,
Have a look at BADI IWO1_TL_INTEGRATION2.
Also see [OSS Note 925072|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=925072]
Which system are you running?
PeteA -
All default routing value has to be changed, while changed the work center in production order
Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy RHi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R
Maybe you are looking for
-
EXTREMELY URGENT!! Last question on Local Interfaces
Using Oracle9iAS 9.0.3 Running on RedHat 8.0 Trying to implement local interfaces to my entity bean. (Oracle9iAS Containers for J2EE for 9.0.3) provides an example for writing local interfaces. pg. 2-10 states: //The variable is specified in the asse
-
Function locator_within_distance is not working
Hi experts, i'm using Oracle function "locator_within_distance" but getting ORA-13226: interface not supported without a spatial index error .. what would be the way around?? Regards, SKP
-
Master database archivelog but not the slaves...is this possible?
Hi, I've followinf situation: 1xmaster database server oracle 9i 3xslave database servers oracle 9i The databases on the slaves are exact copies of the master. The slaves are refreshed every night by a san-sync. The san-sync copies all the datafiles/
-
Issue opening or creating new files in illustrator CS5 windows 7 64bit, "Not Responding"
Issue opening or creating new files in illustrator CS5 windows 7 64bit, program becomes "Not Responding" when opening a file. I had recently tried a trial version of FontExplorer Pro X, and this issue has come up after the Uninstallation of that prog
-
GetNodeValue does not return the full content of the node
Hello Sometimes, the getNodeValue method truncate the content of the node I want to read. I don't understant why... I checked my XML with an XML validator, and it is ok. And it seems that it truncates the text after a specific number of characters (a