Changed IP address on Time Capsule now can't back up

I have a time capsule 2GB model. I was using the time capsule only for backup as I had a router. The router I was using has gone bad so I decided to use the time capsule as a router also.
I set up the router portion of the time capsule as 192.168.xxx.1. It was 192.168.xxx.111. It works fine as a router. Now my MacBook Pro can not backup to the time capsule.
I would guess that the change in IP address is confusing the MacBook Pro as to where the backups go.
Should I change the IP address for the time capsule back to 192.168.xxx.111?
Is there a way to tell the MccBook Pro about the new IP address?
Should I reset the time capsule back to factory and configure all over again?
Any other suggestions.
Thanks
Ralph Foss

Did you try resetting Time Machine?
Open System Preferences and open Time Machine
Click Select Disk
Click your Time Capsule to highlight it
Click Use for Backups

Similar Messages

  • How to change mac address on time capsule

    Hi there,
    How to change mac address on time capsule?

    There are routers that allow you to create/clone a mac address to whatever you like. Since many companies use the mac address to 'register' a unit connected to it's system, you usually just have to let them know you've changed your router and they will reset your system to accept connections from the new device.

  • Time Capsule. Can I back up 2 different macs? What do I have to do.

    Time Capsule. Can I back up 2 different macs? What do I have to do.
    I want to be able to back up 2 mac. Both have about 70gs of stuff and I have a 1 tb drive. So that should be no problem. I have the time capsule already set-up wireless.
    Do I have to make 2 folders? One for each computer? If so how do I do this.
    Any help would be great.
    I just do want to have to do a restore and get all of my daughters stuff on my mac.
    Thanks

    Just set them both up, via #Q1 in the Using TIME MACHINE with a TIME CAPSULE *User Tip,* also at the top of this forum.
    Time Machine will make a separate +sparse bundle disk image+ for each Mac's backups.
    As noted, it will be much faster to do the initial setup and first backup while connected via Ethernet, if at all possible. So your best bet will be to set up one, and let it's first backup complete, before setting-up the second.

  • Had one mac backed up with TC went to back another to same time capsule now can not find back up for original mac

    Had my main mac computer in office for many weeks backed up with TC, all was fine. Earlier today went to back up my Mac Book to the same TC. All appeared to go fine. However went to original mac to see the back ups from the main mac. Said connection error could n ot connect. I can not find any of the original back ups?
    I was told that it was a straight forward procedure to add another computer's backups?

    On the main computer I try and enter the Time Machine and it is telling me that there is no Location for Time Machine Backups. It then tells me that I need to set time machine up again. I then select the time capsule and ask to use it for back up. It then goes on to tell me that "There was an error connecting to server. Check server name or IP Address, then try again.

  • HT201250 My Time Capsule now will only back up one machine

    I have a home network and until yesterday all was working well with my back-ups through Time Machine onto my Time Capsule.  Now all of a sudden it's only backing up one machine and not the other, and none of my backups done previously on the second machine are showing.  How do I fix this???

    It means that there are bugs in Mavericks.
    The down and dirty fix:
    Make sure that no other Macs are backing up at the time
    Pull the power cord from the back of the Time Capsule
    Count to ten slowly
    Plug the power cord back into the back of the Time Capsule
    Wait a few minutes and try another backup
    Please report on your results
    Or, post back if want to try a bit more elegant "fix"

  • Change email address on my account, now can't purchase content from aTV?

    I recently changed the email address associated with my Apple account, and now when I try to purchase something through my Apple TV, it shows my old email address and then when I enter my password it denies me cause it doesn't recognize the old email address.
    How do I get my Apple TV to recognize the fact that my Apple ID and email address for my account has changed?

    Try making a purchase from the iTunes on the host computer, maybe there is a new 'agree to terms' box you have to check or something because you changed your account information - that sometimes works.
    Brian.

  • 180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

    180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

    Thank you William for your most helpful response. I shall deal first with your three comments:
    Not being tech savvy, I would not have been able to make that call myself but it sure makes sense.
    I have updated my profiles as you suggest.  Excellent tip.
    This guidance is good.  Being new to Apple Support Communities, I did not find the field a labeling and guidance to be clear, a point you make.  Now I know, I shall do as you say and will use the small slim box as a header to the full message/question, which will place in the larger box below.
    Secondly, I come to your question: Did anything change on your Mac recently, such as replacing the disk or main logic board?
    The answer is “yes”.  Two events have happened both of which concerned the Time Capsule:
    The telephone company, with which I have access to the Internet and I have my email account, installed a new modum.  After the technician left I had to try and get the Time Capsule and WiFi working again which ended with my having to call Apple for technical assistance.  The Apple technician walked me through a number of procedural steps which effectively re-set up the Time Capsule. 
    Access to the Internet failed and the telephone company reset the modum.  I had to call Apple again.  This time the technician did not reset the Time Capsule but walked me through a number of steps tha included renaming the “site”  (not the Time Capsule).
    Another piece of information that may be relevant is that the MacBook Pro uses the Time Capsule for backup.  Everything appears to be in order.  When I enter the Time Capsule for this laptop I have backups going back for a long time.
    Also, I do a weekly backup of the two computers onto another external hard drive using the Time Machine software.  So I have another backup of both computers.

  • I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

    I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

    Remember security on a TC is an illusion.
    Simply press the reset button for 1-2 sec.. you must not do too long .. it will then hard reset.. but soft reset will revert all passwords to default for 5min. ie TC password is now public.
    Remember this the next time because anybody at all can change your passwords.
    Once into the TC you can then open the view passwords if you wanted any weaker security. Click and open the TC.. and click on edit.. then go to the top menu..
    Voila .. all your passwords in plain sight to any Tom Dick and Fred.

  • Time capsule first said the back up was delayed no it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address help!

    time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!

    Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??

  • Time capsule now does not work with Lion just installed.

    Just downloaded Lion to Mac Air. Time capsule now does not work. Where is the problem?

    Restart the TC.. lion is stupid.. it forgets what it is connected to with alarming frequency ... like someone suffering dementia.
    If it continues to have issues, plug the TC directly to the lion computer by ethernet (if not already) and try again. Change the wireless to manual in airport utility and change the wireless name.. to force a new configuration. Once setup you can just use wireless.
    In the end you may need to reset the TC.. just hold in the reset button for about 10sec. It should then become available.. a reset does not do anything to data on the hard drive but you might need to restore any passwords.

  • Time Capsule full-can't figure it out

    Hi,
    I am running a Macbook Pro 15" with 10.5.8 with approximately 280GB hard drive.  I also run Windows via VM Fusion Ware that takes up about 60GB.  I have a 500GB Time Capsule that was working great until a few weeks ago.  The Time Capsule now shows only 48.2GB out of 463.8 GB available so TM will not backup anymore.  It seems like TM is backing up my entire computer multiple times instead of just the changes.  Any ideas how this is possible since the computer itself only has 280GB hard drive?  And how can I fix this problem?  Thanks.

    mac167969 wrote:
    I did not realize that prevented the backups from being deleted...I just thought it was for notification purposes.
    That does confuse folks, because the option and behavior were changed on Snow Leopard;  on Leopard, the backup fails with a message;  on Snow Leopard, the backup(s) are deleted, and a message is sent at the end of the new backup.  See #C4 in Time Machine - Troubleshooting for details.
      Of course now I tried all this I got an error message:  "Time Machine Error.  The backup disk image could not be mounted".  Any ideas what this means?
    Try re-selecting it in Time Machine Prefs > Options.
    If that doesn't help, try a "full reset" per #A4 in the article above.
    If still no joy, see #P4 in Using Time Machine with a Time Capsule.

  • HT1178 Can I install Time Capsule strictly as a back-up to my local devices?

    Can I install Time Capsule strictly as a back-up to my Windows laptop and Apple devices without using it as an Airport Extreme Base Station? I do not want to use my Time Capsule as my access to the Internet, just as a back-up. I have U-verse voice and data services and am using their wireless router to connect to the Internet.

    You are asking multiple questions..
    The setup of the TC can have a whole bunch of variations. If you followed the instructions to plug in by ethernet and turn off wireless, then all connection is via the uverse modem router.
    TerrenceV wrote:
    Thank you.  Since I am not using my TC to connect to the Internet - I have U-verse, so I installed AT&T's wireless router - it was recommended that I put the TC into bridge mode and connect it to the router using the ethernet.  Without wireless, how do I send my backups to the TC? 
    If you don't use wireless then you use ethernet.. it can be plugged into either the uverse router or the TC..makes no difference.
    Should I disconnect the ethernet, re-establish wireless, and let all my Apple and Windows 7 devices use their active wireless connections to backup to the TC?  If so, how do I direct the backups to TC?  I have Airport installed on my Windows 7 primary computer.  Again, thanks for the help.
    Why do you want to use wireless if you have ethernet? Ethernet is much better and faster.
    If ethernet is not available you can use wireless.. if you turned off wireless in the TC.. then all connections will be via the uverse .. TC .. nothing wrong with that.
    If you leave the TC wireless on.. then you can connect to TC instead and use TC. That is also fine.. makes no difference .. use what works.
    I think you need to play some more.. you questions show you are not understanding the fundamentals..
    In bridge the TC is a dumb hard drive.. plus switch.. plus wireless AP.
    Plugged into the uverse router.. it is like the uverse router now has more switch ports.. a secondary wireless AP and a hard disk.. they are effectively one unit. Any connection to uverse is connection to TC.. any connection to TC is connection to uverse..

  • I have a rMBP that needs to be backed up.  The Wi-Fi in my house is poor and I do not have an Ex. Hard Drive.  I want to get the new Airport Time Capsule, but can you accomplish it's benefits wirelessly?

    So...
    I have a modem across the house and my room is at the opposite side.  I believe that you have to connect the Airport Time Capsule via modem cable in order for you to appreciate the benefits of the boosted up Wi-Fi.  However, I want the airport time capsule in my room, without having any extra cables plugged into it AND also benefit from the Wifi boosts, as well as back it up wirelessly.
    Is there any way to do this?  I was reading up on it and there are search queries bringing up "bridges" and all that stuff, but I haven't found a clear answer on it.
    So, to recap:
    I want the Airport Time Capsule to not only back up my rMPB and help my wifi signal out, but to do all of this with no additional cables having to be plugged in.
    Thanks.

    Trust me when I say this coming from 20 years of experience.
    Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
    Download and install Carbon Copy Cloner, clone internal drive to external drive.
    Set a schedule to remind you to do it at least once a week, keep it near your charger.
    When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
    CCC will do the rest.
    If you want to boot from it, hold the option/alt and select it Startup Manager.
    I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
    It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
    Make as many clones as you want, keep them time seperated, off site etc. etc.
    Cables don't have network issues, clones can be verified in seconds merely by booting from them.
    Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
    Software problem? No sweat, boot of the clone and reverse clone your problems away.
    If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
    I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
    Most commonly used backup methods

  • Hello, I have two questions on time capsule  I can only have it on my external hd files and free up my internal memory to my mac  I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

    Hello, I have two questions on time capsule  I can only have it on my external hd files and free up my internal memory to my mac  I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

    I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
    There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
    and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
    Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
    Again everything is explained in the reference.. you are not reading it.

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

Maybe you are looking for

  • Can some1 tell me how 2 stop auto flash fr.adobe plz

    any help from any of u will b greatly appreciated as I need 2 know where 2 go on IE 2 stop anymore automatic downloads & trust me I'm desperate as I'm disabled & need my comp.& w/flash v.12 has screw up chrome 4 sure but  know how 2 disable flash on

  • Webdynpro abap & Flex Integration

    Hi I integrated Flash Islands Into Webdynpro Abap..Flash Island Is displaying..but the values which im passing through wddoinit method to the frontend is not displaying..binding from context nodes to gacproperty is done( name same as flex field is gi

  • How make WAR file on Tomact

    Dear Sir, I am using weblogic Application server of BEA. But I am not known use the Apache Tomcat.I have been set the classpath=C:\Program Files\Apache Software Foundation\Tomcat 5.0\common\lib\servlet-api.jar;. and path=C:\Program Files\Java\jdk1.5.

  • Flex Programmers in Seattle

    I am looking for any Flex programmers in the Seattle area to get together and bounce ideas off of and such. I would love to use the Seattle flex users group site but there isn't one single piece of contact info on the WHOLE thing.

  • Can't Wake My Sleeping Blackberry 9630

    Hi... I recently got the Blackberry Tour (carrier: Verizon Wireless).. I set it to automatically go to sleep from 11 PM to 7 AM so I wouldn't be woken up frequently throughout the night.  However, now I can't seem to wake this think up!  I woke up ea