Changing default attributes of objects

In a certain document I've created, I mistakenly set it up so that every new shape I create, a box for example, takes on several effects such as rounded corners, drop shadow, and outer glow, that I don't want.
I had applied those attributes to one object sometime back in this document, but it was meant only for that one. Now it happens to every new object.
How do I just set things back to neutral?

Window > Object Styles
You may have created a new Object Style or changed the Default Graphics Frame

Similar Messages

Change default language in object SELFITEM.SENDTASKDESCRIPTION

Dear WF Gurus,
We are using object SELFITEM method SENDTASKDESCRIPTION to send email to manager for request (Leave and Travel) approval. FYI, our system is used by several countries and there are several logon languages available in the system. Currently the ibject works OK because we default the language expression of the task (in the container tab) as EN. So regardless of the logon language of the user, SAP system will send the email in English. We also do not translate the email to other languages.
But now another country with Portuguese language is implemented in the system and the users want everything to be translated to PT including approval email mentioned above. If we change the default language in the container to initial, it works OK for PT, because we have translated the email to PT. But we have problem with other countries, because they login using their own language, but still receive the email in English (we don't do email translation for them). So anyone have any suggestion on how we can proceed ? Thanks.
Regards,
Arief

Well, what if you just remove the default language EN from the email sending step. If a user triggers the workflow, which will then in turn send the email, the workflow is started in the corresponding language. If you don't have a default language set up, the email sending step might use the language in which the workflow was started (Which in your case might be correct). I am not sure this, but you might try it.
In general I think the best approach is the one that I explained in my previous answer already. You need find out the email receivers language, and use (=make the binding from the workflow container to the email sending step language parameter) that language in the email sending step. The only "difficult" part is to how to get the receiver user's language in to the WF container. Basically the idea would be that you create for example a new step in your workflow. In this step you will what is the language of the email receiver user, and return it to the workflow container. Then just bind it to the email sending step.
Regards,
Karri

Problem Instanciating BO - No default attribute defined for the object type

Hello Experts,
I am instanciating the BO BUS2038 to ZBUS2038 and when I click in u201Cto implementedu201D and follow u201Cto releasedu201D the message No default attribute defined for the object type is appearing!
Can anybody help, please?

Hello everyone,
it appears to me, that no one has a clue about the "default attribute" and is widely guessing what can be done about that.
I feel deeply sorry for that, Marcos.
At first: You don't really need to care about the missing default attribute. If it's missing, the object's instance key will be used instead. Skip the warning message.
Secondly: The default attribute is used to display the instance within the "Object links & Attachments" under the work item preview when using the SAP Business Workflow.
Thirdly: You can select any existing attribute of your business object type to be the default attribute, by navigating to the "Basic data" (it's the heat-icon within the object builder), use tab "Defaults" and use the Input Help on the field "Attribute".
There you'll go.
Best wishes,
Florin

How to change attributes of Objects of all windows in a MDI application

Hi,
I have a MDI application to draw Object. In these MDI windows I can modify attributes of Object like color, size... Now I want to create an option, when the user change or modifies attribute of Objects in a window, so it allow to change attributes of objects in all windows. I don't know how I can do it, please help me. Thanks

Allow your objects to alias mutable attribute objects.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.util.*;
import javax.swing.*;
import java.util.List;
public class Example extends JPanel {
    private List bangles = new ArrayList();
    protected void paintComponent(Graphics g) {
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D) g;
        for(Iterator j=bangles.iterator(); j.hasNext(); )
            ((Bangle)j.next()).paint(g2);
    public void addBangle(Bangle bangle) {
        bangles.add(bangle);
        repaint();
    public static void main(String[] args) {
        JFrame.setDefaultLookAndFeelDecorated(true);
        JDialog.setDefaultLookAndFeelDecorated(true);
        Example app = new Example();
        JFrame f = new JFrame("Example");
        Container cp = f.getContentPane();
        cp.add(app, BorderLayout.CENTER);
        cp.add(Controller.create(app), BorderLayout.NORTH);
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.setSize(800,600);
        f.setLocationRelativeTo(null);
        f.setVisible(true);
class Controller {
    private Shade shade1 = new Shade(Color.GREEN), shade2 = new Shade(Color.RED), currentShade=shade1;
    private Example modelView;
    public static JComponent create(Example modelView) {
        return new Controller(modelView).createUI();
    private Controller(final Example modelView) {
        this.modelView = modelView;
        modelView.addMouseListener(new MouseAdapter(){
            public void mousePressed(MouseEvent evt) {
                Rectangle shape = new Rectangle(evt.getX(), evt.getY(), 20, 20);
                modelView.addBangle(new Bangle(shape, currentShade));
    private JComponent createUI() {
        ButtonGroup bg = new ButtonGroup();
        final JToolBar tb = new JToolBar();
        final JRadioButton rb1 = createRadio("Shade 1", true, shade1, bg, tb);
        final JRadioButton rb2 = createRadio("Shade 2", false, shade2, bg, tb);
        JButton btn = new JButton("Change color of selected shade");
        btn.setContentAreaFilled(false);
        btn.addActionListener(new ActionListener(){
            public void actionPerformed(ActionEvent evt) {
                Color newColor = JColorChooser.showDialog(tb, "Choose new color", currentShade.getColor());
                if (newColor != null) {
                    currentShade.setColor(newColor);
                    if (currentShade == shade1)
                        rb1.setForeground(newColor);
                    else
                        rb2.setForeground(newColor);
        tb.add(btn);
        return tb;
    private JRadioButton createRadio(String text, boolean selected, final Shade shade, ButtonGroup bg, JToolBar tb) {
        JRadioButton rb = new JRadioButton(text, selected);
        rb.setContentAreaFilled(false);
        rb.setForeground(shade.getColor());
        rb.addActionListener(new ActionListener(){
            public void actionPerformed(ActionEvent evt) {
                currentShade = shade;
        tb.add(rb);
        return rb;
class Bangle {
    private Shape shape;
    private Shade shade;
    public Bangle(Shape shape, Shade shade) {
        this.shape = shape;
        this.shade = shade;
    public void paint(Graphics2D g2) {
        g2.setColor(shade.getColor());
        g2.draw(shape);
class Shade {
    private Color color;
    public Shade(Color color) {
        this.color = color;
    public Color getColor() {
        return color;
    public void setColor(Color color) {
        this.color = color;
}

Change Default Print Attributes

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

How to Set / change the attribute of Business Object

Hi all,
Say I have a Z Business Object -> ZBO
Inside the BO, I have an attribute -> ZA1
And one method -> ZM1
Is there any way in which i can set / update the attribute ZA1 (for any particular instance) outside the Business Object (I mean without writing any code in the program of the Business object)?
Thanks,
Deb

>
Debidutta Mohanty wrote:
> But Inside the class -> Can be assigned or changed -> Using Method -> Correct ?
>
> That means, inside the Business Object aslo, we can have one method to assign or change attribute. Is there any Macro to change the attribute ?
Yes.
BOR attribuites are a piece of code. You can see this by hilighting an attribute and clicking on the "Program" button. That code returns the attribute value, usually something from a DB table, something calculated, or a private attribute.
To change what the attribute returns, you need to change the underlying data. How you do it depends on what your attribute code does in first place. This is why we can't give you an exact answer. If your attribute retrieves a value from a table entry then you need to change the table entry. If it is a calculated value then you need to change the data used in the calculation to make your attribute return something else. If it returns a private attribute value then you need to update this via a method.

[svn:bz-3.x] 20876: Change default max object nest level to 512.

Revision: 20876
Revision: 20876
Author:   [email protected]
Date:     2011-03-16 09:02:36 -0700 (Wed, 16 Mar 2011)
Log Message:
Change default max object nest level to 512. A max object nest level of 512 should be more than enough for most applications which probably will not be sending deeply nested object graphs over the wire. For applications that are sending deeply nested object graphs over the wire and that bump up against this limit, the limit can be increased but you should also do testing to make sure that serializing/deserializing these deeply nested object graphs doesn't cause stack overflow errors.
Add documentation for the max object nest level setting.
Add documentation for the max collection nest level setting.
Checkintests: passed
Modified Paths:
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java
    blazeds/branches/3.x/resources/config/services-config.xml

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

[svn:bz-4.0.0_fixes] 20874: Change default max object nest level to 512.

Revision: 20874
Revision: 20874
Author:   [email protected]
Date:     2011-03-16 06:55:37 -0700 (Wed, 16 Mar 2011)
Log Message:
Change default max object nest level to 512. A max object nest level of 512 should be more than enough for most applications which probably will not be sending deeply nested object graphs over the wire. For applications that are sending deeply nested object graphs over the wire and that bump up against this limit, the limit can be increased but you should also do testing to make sure that serializing/deserializing these deeply nested object graphs doesn't cause stack overflow errors.
Add documentation for the max object nest level setting.
Add documentation for the max collection nest level setting.
Remove max-string-length-bytes setting from the example services-config.xml as this setting doesn't exist.
Checkintests: passed
Modified Paths:
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.j ava
    blazeds/branches/4.0.0_fixes/resources/config/services-config.xml

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Change default pabURI attribute

Hi every one,
I did a dedicated instance of Directory Server for Address Book listening on the same ip address but 1389 port.
When i create a new mail user from Delegated Administrator, it assign to the user a pabURI attribute like this:
pabURI: ldap://mailbe1-ds:389/ou=user,ou=People,o=mailservice
I need to change default pabURI on DA from the one listed above to the following:
pabURI: ldap://mailbe1-ds:1389/ou=user,ou=People,o=mailservice
which file i need to modify ???
Regards
Caius

Solved, changing messagging parameter "local.service.pab.ldapport" with configutil.
It's not the DA to set pabURI attribute in user profile.
BYE
Caius

Getting Keynote's "Defining Default Attributes of Text Boxes" to work

The following is from the iWorks09 Keynote "Help" for the topic "Defining Default Attributes of Text Boxes and Shapes":
4. Do one of the following:
To make the text box the default for only the current master slide, choose Format > Advanced > “Define Text for Current Master.”
To make the text box the default for all master slides in the current theme, choose Format > Advanced > “Define Text for All Masters.”
I tried doing everything up to this point, but when I select "Format > Advanced" there is NO OPTION (not even unselectable "faded") for > “Define Text for All Masters.” There is only a an option for "Charts" & it is unselectable (there should be options for text, shapes, charts, etc.)
Can anyone help me?
If not, this is definitely a *+_major bug_+* that needs to be fixed!!

Kogiah,.
What do you mean when you say that the Lock commands don't work? Are they grayed-out, or is that once you use them you don't like the result? If the option is grayed-out, you either don't have an object selected, or the selected object is formatted as Inline. Changing the format to Floating will bring back the Lock option.
Jerry

How to change default compile directory tmp_ejb?

Dear all,
Someone knows how to change the default directory "tmp_ejb...." in WebLogic Server
7.0?
This is the default directory where WebLogic Server 7.0 generates and compiles
the EJB's declared in config.xml.
I try to specify the attribute TmpPath="ANOTHER_TMP_LOCATION_DIRECTORY_FOR_EJB"
in the EJBContainer node but still doesn't work.
The same thing happens when I test this attribute on EJBComponent declaration.
Someone knows if there is an enviroment variable that specify this tmp_ejb location
path?
It's false that the tmp_ejb is located where the config.xml file is placed.
I have 3 weblogic servers and they haven't the same behaviour.
Someone can help me??????
Thanks.

I ran into the same problem and was wondering if you got an aswer the question you posted in BEA's news group: "How to change default compile directory tmp_ejb?
Thanks

"Default" attribute in XML not getting populated in BPEL process

Hi.
I have a SOA 11g composite that listens to an inbound MQ (using JMS Adapter), which handovers the request to a BPEL process.
In the input xml, some of the elements have "default" attribute. So, if the user doesnot populate these values in the input, it should be populated with the default values.
But in BPEL Process when I read these values, it comes as null instead of the default value.
Could some one help me out if there is a way to handle this?
K.P

Hi,
Please check if you have some values in ZMATRL2 while data laod to CUbe.
If yes , then run and attribute change run for ZMATRL2.
Also check if you have daat laoded for ZMATRL2 where we have its attribute ZCMARKET values corresponding to ZMATRL2T.
These are are probable reasons why u cannot see navigations attribute data.
Thanks
Mukesh

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

How to Change default text in Multi-Selection Table Bar

Hi,
I would like to change the default text "Select Object" on the Multi-selection Table Bar.
I tried adding the following in my resultsCO but I'm getting errors:
tableBean.setTableSelectionText("<newText>");
Error(25,34): invalid method declaration; return type required
Error(25,35): illegal start of type
Error(25,3): missing method body, or declare as abstract
What am I missing?
Thanks much.

I got it to work with the following:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OATableBean table = (OATableBean)webBean;
// Set the install-base specific "control bar" select text:
// "Select Item(s)…"
table.setTableSelectionText("Select Item(s)...");
}

Change default stroke/fill in existing doc

We have several existing large documents that are part of a book and we are unable to change default settings for stroke and fill. Whatever we try as soon as we draw an object the line and fill revert back to the same setting of stroke weight: 0, color: 0, swatch: none. We can create and save a new document and then go back in and make default changes and it sticks, so we have some knowledge of how to do this. Any help will be appreciated. Thank you! (CS5.5 7.5.3.)

Don't work with books much, but it occurs to me that Graphic Styles are one of the options that can get synchronized across Books. Try changing those Graphic Styles in your Master document and synchronize settings across the book. (Try this on a copy of your Book, since I don't know what other consequences your Book might suffer.)

Changing default attributes of objects

Similar Messages

Maybe you are looking for