Changing description of a Transport object

Hi
On my development box, in the tcode se10, I see a modifiable transport Number and its Description (Test_to_be_Transported).
The description is faulty and I would like to change it. Is there a way to change the description at this point?
Thanks.

Hi amanda,
if the request is not released just double click on the request and click on change button (pencil icon) click on Properties tab and you can change the description there, just save it and you are good to go.
Hope it helps

Similar Messages

How to change description of released transport request

Hi experts,
The transport requests tasks and are released and owner of TR also released, now need to modify description.
Is their any possible way to do it, because transport is not moved out of the system.
Thanks,
Pavan

Hi
There is one way to achieve this.But this s not advisable.
1.) Got o FM 'TRINT_CHECK_REQUEST_CHANGEABLE'
At the line number 111 IF is_request_header-trstatus CA sctsc_states_released, put the break point.
1.) Double click the released request which you want to change the description.
2.) your EDIT option will be disabled. Just type '/h' in the tcpode area and press enter, your debugging will switched on.
3.) Then Press ENTER again, it will open the debugger screen, in the variable change the SY_UCOMM field to 'WB_DISP_EDIT_TOGGLE' . Then press F8.
4.) your control will be in the FM 'TRINT_CHECK_REQUEST_CHANGEABLE' line number 111. Try to skip this IF condition by using debug technique.
5,) Now you can change the description.Now you cant save this as Save button is disabled.Just press back button, you will get the message for save the changes.Just save it. Done.
Thanks and Regards,
Senthil Kumar Anantham.

Changing Original System and Transport Target System for Objects

Hi Gurus,
I need to do mass transport of all the Infoobjects to newly defined system. Since these objects have different Original system. Its giving me error. Again, for other objects, Transport Target system is QAS, But we want to change it to NBW (A new system to which we want to send transport) . I am able to change package of Infoobjects. Is there mechanism to change Original System and Transport Target for System? Please let me know ASAP.
Regards,
Harpal
Message was edited by:
Harpalsinh Gohil

If you simply edit your original post, it will go to the top of the list. There's no need to post duplicates.
Subjects with a subject of "Urgent" will be filtered out by a lot of responders.
Why not close this thread and bump the other one?
Rob

Specifying Critical Transport Objects under Change Management Extend config

I'm trying to configure Change Management and I am in SPRO under SAP Solution Manager -> Config -> Scenario-specific settings -> Change Managment-> Extended config -> Change Request Management -> Specify Critical Transport Objects.
It states that you need to select the system/clients for which you want to specify critical transport objects. however, i do not see my systems listed there. I'm assuming i've missed a prior step somehow.
Any help would be appreciated! Thank you!
Margo

Hi.
There are several things necessary to make the system appear in this transaction (/N/TMWFLOW/CMSCONF -> critical obejcts)
You need:
- a smi project
- a logical component assigned to that project which contains your systems
- at least one system within your logical component of type "developement system"
- the project needs to be released for change request management (tx: solar_project_admin, "activate change request management")
Hope this helps.
/cheers

How to change local object to transportable object?

I have a structure that was created locally but I want to move it to QAS, so I want to make it transportable object. How do I do this?
Thanks.
Mithun

Thanks Rich. When I tried to transport I got an error below:
Table ZXXX could not be activated
(E- Nametab for table ZXXX cannot be generated )
Any idea why this would happen?
Thanks.
Mithun

Transporting Objects

Dear BW Experts,
I have few questions about transports. Would you please guide me thruough this, my understanding of the concepts is not clear.
Question 1:
what is the <b>difference between Collecting objects at the object level</b> for eg: Infopackage >> Object Catalog Entry >> Enter developmet package and request id
and <b>doing it at the RSA1 >> Transport connection</b> and selecting objects and click on the Transport objects truck.
Do these 2 functions mean the same ? Please advise.
Question 2:
Do we collect / transport the Transfer rules, Communication Structure and the DataSource, too ?? Little background on this is, the ODS_21 is feeding the new ODS_22. The ODS_21 is already there in QA & Prod. Please advise.
Question 3:
This ODS_22 is feeding new cube CUBE_001, so do i collect the Transfer rules, Communication Structure and the DataSource, too ?
Please advise.
Thank you,
T I

Hello San,
Thank you for clearing that up. It sure helps. Since this Cube_001 is not feeding any other targets, there is no export datasource for this. so, i think there is no need in this situation.
I was hoping if you could help me with this. When i collect the infopackge to transport, would i enter a check mark to collect the infosource, communication strusture and transfer structure. Since there are no changes made i felt there is no need to collect them but just wanted to get some expert opinion.
Please advise.
Regards,
TI
Message was edited by: TI

Best Practice - Changing description for Org Unit/Position or creating new?

Hello Freinds,
I just want to know from your experience what's normally practiced in your implementations for OM :-
For scenarios where there is a need to change the description of a particular org unit or position, do u
1. just change the description effective a particular date (to maintain history) or
2. put an end date to those objects and create new ones ?
Solution 1 is quick and easy, but in IT0001 the description displayed is as on start date of that infotype which is normally a date prior to the change in desc of those objects. As a result this infotype keeps displaying old description.
Is there any way to change this display to show the current description instead of the description as on start date of this infotype ???
Solution 2 calls for a lot of related activities, say if i create a new org unit and delemit the old one - then i have to move all the sub org units and positions into this new one ... which is quite time consuming and doesn't really seem practical.
How do u manage such scenarios ?
Thanks
Allen

We use option #1, although I am not sure this is best practice. Using option 1 for positions makes it challenging when it comes to reporting on length of time in position. We frequently have the scenario where a person is reorged not because they applied for another position, but just because the big wigs want to move around the chess pieces. In these cases we simply modify the position attributes and then run a PA action. Then if you run a query and use the standard delivered Length of time in position field, it appears as if the person has been in the same position for years (which they have), but their position has been retitled, re-graded, and re-orged numerous times. This makes it very difficult to get to an employee's length of time in their role.
This is a great discussion question I hope more people respond with what they do and why.

SRM non transportable objects

Hi,
I have a request from our SRM Consultant to change the below objects to non-transportable objects. I would like to know the best process in handling this. It is not clear to me as to what objects these are. Some of them are tables, as I found out later. But other objects are not clear.
BBP_WS_VC - Define external call services. Used for definition of catalogue call structures.
q       BBP_BACKEND_DEST - Definition of backend systems
q       BBP_DET_LOGSYS - Define backend system for product category
q       BBP_TARGET_OBJ - Determine target object in backend system
q       BBP_DET_ACCT - Define G/L Account for product category and account assignment category.
q       BBPV_SRC_DET
q       BBPV_AVL_DET - Sourcing by Vendor List flag.
q       TWPURLSVR - Logical web servers for logical systems
q       Any R3TR SICF objects, which contain user names
q       Any R3TR SMIM objects, typically images for the catalogue
thanks in advance,
Abdul

Hi
This is not recommended and best practice by SAP.
Any specific reasons - why you want to do this ?
Please consult the same with SAP by creating a OSS message as well.
Regards
- Atul

Can we edit the transported objects quality systems?

Hi,
i am working in the development project.i have finished the development work and transported those objects to quality system.
i want to know whether the transported objects which are in the Quality System can be edited.
when i tried to do so the change icon was disabled.
Regards,
Muniyappan.

Hi
Yes ..you can change it in SWCV...Check box ..objects are modifiable.
After this ...you can edit your QA objects...
But..After manual changes done in QA objects..it will create a conflict while transporting the same object from DEV to QA..
In Conflict tab..you have select the latest object as an active object.
Regards
Abhijit

How to change original source system of objects at one time

Hi, experts !
I installed extra devlopment server using system copy of orignal
delveopment system.
We have planed that new objects applied to orginal server after developing
finished on extra devlopement server.
The problem is we can not modify or add old objects for specific
package because orignal source system is different
and I know this is SAP policy.
Of course original source server can be changeed on t-code SE03 or
function module TRINT_TADIR_MODIFY
but it should be applied to every objects. This is big job to BC admin.
Is there any solution to possible it at one time?
Best Regards

You can transport all relevant packages from the old to the new development box including a change of the original system using a special transport request of type "relocation of complete package". Check with your system administrators.
Please close your similar post here:
How to change original system SID to objects by batch?
Thomas

Change Package For Many Bi Objects

Dear Gurus,
Before transformation, Is there any way to change package for many bi objects ?
Transport Coonection tab dont allow me to change package of these bi objects?
Cheers,

In the transport connection screen select the object -->send it RHS --> before changing the package make sure that object is not in any of the Transport request if so release the request using the Tcode :se09 and now select the object in the transport screen click on change package it will prompt a window where you can update the package and create TR for it.

SPAU query for documentation and maintainance and transport object

Hi All,
I am working on upgrade using SPAU. In without modification assistant there are two nodes and objects in red- 1. maintenance and transport object 2. Documentation.
When I click on maintenance and transport object , I get the red button for cluster maintenance SOBJ.I try to open in maintain/change mode but it is not giving any option to activate or anything. As it is maintenance it gives an option to create a new entry only.( see attached capture1 & capture2)
What do we need to do to make it green ? I tried to search but did not get anything related to this. I have attached screen shot for the same.
Also for documentation, what needs to be done as adopt modification ? I get the pop up for create modification when I click on data element documentation. Do I need to create modification ? what should be the template type ? (Please see the attached screen shot capture3 ).
Also for both I get 'no version found'.
I would really appreciate your help.
Thanks,
Niki

Can anybody help/guide on this please ....

Change BS names while transporting

Hi
I have to Transport objects from Dev to Qas. I am using File Transport and I am downloading it to the client, Desktop. When I import it to the QAS, will the names of the Business Systems change or do we have to change them manually?
How do we include the option in SLD so that the names of Business Systems will point to the ones in Quality when it's transported ? I am maintaining only one SLD for Dev, Qas and Production
Regards

Hi Abhishek,
No, I have not created any gropus. This is how I thought of doing it. Transport all the objects under SAP APPL from ESR and also all the objects from under the Configuration Scenario that I created in ID.
As far as SLD is concerned, it contains only the Business Systems. How many groups should I create ? Right now, I am working on one scenario. There are three more to go. So should I create a Group that includes all the Business systems from the current scenario? Then after I finish each scenario create Groups for each scenario?
I have not yet created the Business Systems for PROD ?
Regards

ECC 6.04 transport objects to ECC 6.05

Hi Experts,
My apology in advance if I posted it in the wrong category.
I'd like to know if its possible to transport objects from ECC 6.0 eh4 to ECC 6.0 ehp5?
Cheers,
R-jay

Dear R-Jay,
I'll try to explain things with some examples.
SAP objects may not be transported between different releases (e.g. a table in an old release could have less fields than in the newer release and thus such a transport might delete data or if an abap calls a function module and both have in the new release one parameter more, then you get syntax errors if you transport only one of them from
a system with the old release, ...).
So data loss and severe inconsistencies can happen if you transport SAP objects between different releases, or between systems with same release but different support package level or between systems with different addons or different add-on versions...
For pure customer objects (e.g. Z-tables, Z-programs, Y-tables, Y-programs or objects in customer namespace) it might be ok to transport them. But if, for example, your Z-table uses an SAP data element which has maybe been changed in the new release or does maybe no longer exist, you can also get problems during transport of your Z-table.
Therefore, if you decide to transport objects between your SAP ECC 6.0 ehp4 and the ehp5 you must be really carefull because several inconsistences may arise. Anyhow, from a technical point of view this transports should be handled as normal transports.
I hope above information would help.
Regards,
Nitin

Is there any way to change the type of Transport like workbench to Customiz

Hi All,
Here we are having very silly question.
Is there any way to change the type of Transport like from
Workbench to Customize and from Customize to Workbench within the same client.
Assume that there the no object associated with the transport.
Your quick respose is highly appreciated...
Thanks in Advance!

No this cannot be done.
Both work bench and custimizing are separate entites when it comes to tranport layers config.
You cannot save a report change into customizing request this will be saved into work bench request only .
In the same way table entries or some customizing tasks can be captured only into custimizing tr.
Br,
Vijay.

Changing description of a Transport object

Similar Messages

Maybe you are looking for