Changing Hibernate - connection URL after startup in LCDS

Hi,
I have a flex app that have different databases (names) with the same tables.
I want to dynamically change the database url in hibernate (or hibernateassmebler used in data destination) based on the customer.
(example. xyz company will have xyz database in mysql)
While I know it is possible to have assembler run-time configuration and change it using remoting, I am wondering if there is any solution to change Assembler hibernate-db-configuration (like by extending it..) on demand. (for destinations that are already written in the data-management.xml file).
If not, it poses a large inflexibility.

Finally I have found this site:
[http://blog.mclaughlinsoftware.com/oracle-architecture-configuration/changing-windows-hostname-and-oracle-enterprise-manager/|http://blog.mclaughlinsoftware.com/oracle-architecture-configuration/changing-windows-hostname-and-oracle-enterprise-manager/]
These are the steps:
1. Change the %ORACLE_HOME%\network\admin\listener.ora file from an IP number to machine name.
2. Change the %ORACLE_HOME%\network\admin\tnsnames.ora file from an IP number to a machine name.

Similar Messages

TS1424 Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. I

Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. Ideas?

Hi, you have to logout from your iTunes account and reconnect it:
Settings / iTunes & App Stores / ...
https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
Hope this helps... :-)

No internet (wired) connectivity directly after startup

Often after starting up my computer I have no functional internet connection. A restart is then required to get connected.
As a result syncs normally done at startup (such as dropbox and an rsync script I run) fail. Safari behaves as if there is a connection,
but does not actually connect to any site.
Note that this is NOT a WiFi problem, since I am connected to the router by ethernet cable (as well as WiFi, usually).
I have never seen this before on Mavericks.
I have started noticing this after upgrading to Yosemite, on several occasions and on several computers, including a late 2013 iMac and an early 2008 iMac.
After a restart the problem is always gone. I have never seen it happen on the second start.

Hi Eric,
Thanks for your reply.
Tonight the problem has turned from a minor nuisance into a major disaster, so I hope you -- or some else -- can help.
When I turned on my new, 2013, iMac this evening I had once again no internet, as stated in my post. I checked that the status lights in System preferences, Network was green. But there was no connection to anything. I restarted. Still no internet. I turned WiFi on. It connected (WiFI signal in status bar was black, with four bars showing). Now both status lights in System preferences (Ethernet AND WiFi) were green. But still no connections to anything. Then I decided to restart my router, and then the iMac, but this did not help.
I checked that my iPad connected to the internet, and it did, before and after the router restart. I tried two more restarts, but unlike what happened in previous occasions this did not help either. Then I decided to try my MacBook Pro (Mid 2009), via WiFi, and it connected without any problem. Then I tried to restart my iMac from a clone I made a few months ago. This worked, and I was connected to the internet. Then I restarted my iMac from its internal disk again. Now, finally, I had internet.
But then I noticed something really weird, which might be a clue. I clicked the two links in your mail. They opened in Safari. The pages load extremely rapidly, but turned out to be completely empty. This is not the first time I have noticed such behavior with Apple Support pages. Previously, I believed that there was something wrong with those pages. But now I tried to look at those pages on my laptop (also running Yosemite 10.10.1) in Safari, and they load at normal speed, and are visible. Then I tried looking at them on my iMac using google Chrome, and once again they are visible.
Unfortunately those pages do not address my problem, but I understand these are the first things to check, and I appreciate your help.
I will report here how this story continues, because clearly it is not finished.

When I try to download an app it comes up with no connection URL and it says I've typed in my password wrong multiple times when I haven't changed the password

So I have tried to download several apps and it asks for my password. I type in my password and then it comes up failure to find service connection URL. After clicking retry multiple times it comes up and say my password is incorrect. When I logged in here my password is correct. How do I fix this

Hi, Taterbug17.
I would recommend signing out of the iTunes Store on your iOS device and sign back in. Here are the steps on how to process these steps.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H.

New X300, XP installed, radio disabled after startup...how to change that!

Hi there,
got the X300 and after replacing Vista with XP the problem came up that my wireless connection is always after rebooting turned off! It's no problem to turn it on, but it's my job to configure that and it's no good state like this.
I've updated to the latest intel 4965AGN driver and also got that Intel ProSet Tool. Hardware is also turned to wireless. ThinkpadAdvantage Access connection is also good.
The exactly process is that at the startup the intel proset now is opened automatically-->excellent connection and after 3 seconds it turns off!
Anybody able to solve this problem?
thanks in advance
moritzbond

moritzbond, welcome to the forum,
it sounds as though you have a possible power management issue. If you are using Access Connections you will need to edit your profile(s) in the following way:
In AC profile editing select the "Settings for Wireless Connections", then click the Settings button at point "5" Advanced Configuration and choose in Power Saving "Low - Best Network Performance". It is also worth changing the power settings in the properties of the WLAN card through Device Manager.
Obviously with these settings there will be a reduction in battery life.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

No automatic connection to a wireless router after startup!

After adding a new wireless router to my home network an iMac G5 does not automatically connect to the wireless network after startup.
And so the story began: I'm running a wireless network for years without problems at my home. The wireless router is a Orinoco 102.11b with 128-Bit WEP encryption and I have 4 different Mac connected to it.
Because I wanted to use the higher 54 MBit/s speed and a more secure encryption for my network I've installed a LINKSYS wireless router and configured it for 102.11g and WPA2.
Everything worked fine except the automatic connection after restart on my iMac G5 running Mac OS 10.4.10. I can connect to the new wireless router but I have to do it manually after each restart. The password is therefore stored in the login keychain. The connection can be established automatically after sleep but not after startup...
So I switchted the connection back to the old router and got unfortunately the same behaviour. The iMac does not connect any more automatically to the router after startup. I removed the new router from the network, deleted all wireless passwords from the system and login keychains, created new keychains, switched back and forth the preferred vs. automatic network selection, created new locations, changed the root password and so on...
It seems that the new password entry in the system keychain causes an error in the password encryption of the system keychain which prevents the automatic connection to the network after startup. Replacing the keychains from my backup does not work either after I've once created a the system keychain.
Is there any log file, which may proof my assumption or can give me some more information of the erroneous login process to the wireless network during startup.

One thing that can work, try this, *please ignore the exact symptoms and connection and Hardware types*, it's worked for many others than the stated...
http://docs.info.apple.com/article.html?artnum=304482

Failed to open the connection after changing the connection in CMC

Hi
Below are our environment details:
BOXI 3.1 SP3
Solaris Sparc 10
Crystal Reports 2008 Sp3
Weblogic 11g
Our team is facing the problem as described below:
We have created Crystal Reports using JDBC connection and it works fine
in an environment(SIT).
When we migrate these reports to the another environment(UAT) we get
the error "Failed to open the connection"
After migrating we indeed change the connection to Custom Database
Login Information in CMC.
So to troubleshoot we installed Crystal Reports in UAT environment and
had to perform Set DataLocation after which
the reports starting working fine.
Now when we are migrating reports to Production we have the same issue.
We cannot install Crystal Reports on Production this time and hence we
are stuck.
Please let us know if any known workaround or solution for the same.
Thanks
Kamal
Edited by: Kamalaksha Shetty on Nov 15, 2011 4:18 AM

Hi Meenal,
I am not 100% sure I understood the workaround of having Crystal Designer on the server. Can you connect from UAT designer to production and perform the same operation?
Check this KBA that describes this problem and a solution:
https://service.sap.com/sap/support/notes/1445067
Regards,
Julian

Connection fails after changing router to wpa

hi there i got a wireless-b BEFW11S4 router and my pc is using a wireless-g adaptor. my internet is supplied by a company who reguired us to change to wpa and after that my pc could't connect to the internet. my laptop is still able to connect so im wondering what is wrong

im not sure but that shouldn't be the case. my adaptor can connect fine when i disable the wireless security(wpa pre-shared key)in the router wireless settings. unless ofcuase that a b router cant accept a g adadpotr when running wpa

My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!

My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!... It worked fine with previous OS X .... How can I fix this??

My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!... It worked fine with previous OS X .... How can I fix this??

Wifi no longer connecting after startup

wifi no longer connecting after startup... so I have to connect manually... started after 10.7.3
any ideas

Which computer are you experiencing this on?
There are several threads dealing with (mostly) iMacs + bluetooth keyboards/mice and issues with WiFi no longer automatically connecting. There seems to be some issue that 10.7.3 introduces with these series of macs.
No Apple provided solutions yet, but several workarounds: 1) attach a network cable direclty from modem/router to mac; 2) use the power button instead of mouse/keyboard to wake up mouse; 3) use USB keyboard/mouse (not personally confirmed); use airport extreme/express as a bridge.
Right now it's a waiting game until Apple provides another update. I do recommend going to Apple feeback: (http://www.apple.com/feedback/) and at least voicing your opinion. Calling AppleSupport will do the same, but they'll make you go through the same (likely useless) steps everyone else has done.
Good luck!

Tab title is changing to "connecting" after page has loaded

Yesterday, my tabs in firefox started to act a little bit odd. When (only when) tab has loaded few seconds pass and tab title changes to "Connecting...". Before title change to "Connecting...", tab title is as it should be - webpage title. And this is happening to all tabs. I have opened like 12 tabs all the time. Is someone familiar with this situation? I don't have tab renamizer installed. Thanks

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.

"cannot create jbcd driver of class " for connect URL 'null'" error

I am trying to get an application that is currently working fine on a Windows platform to work in a Linux environment.
One thing that is different from my setup in Windows, and also one that I have no experience with, is the Linux-Ubuntu default install of Apache uses Virtual Hosts and Tomcat's equivalent multiple sessions.
I'm running the app out of the usr/share/tomcat6/webapps/msgboard instance of Tomcat vs var/lib/tomcat6.
I am calling the application from Apache Virtual Host port 80 using mod_jk. The application cannot run under native Tomcat because of the extensive use of PHP. Everything else in the application is working correctly including a DWR (Ajax) servlet. However I also tried a simple test app from native Tomcat and got the same results.
I also tried connecting with jdbc:mysql://localhost:3306/msgboard?autoreconnect=true&user=root&password=password at the terminal prompt and got
bash: jdbc:mysql://localhost/msgboard?autoreconnect=true: No such file or directory
[1]7074
[2] 7048
[1] Exit 127 jdbc:mysql://localhost/msgboard?autoreconnect=true
[2]+ Donesyslog error is
Feb 23, 2009 3:01:51 PM org.directwebremoting.util.CommonsLoggingOutput info INFO: Exec: Online.getPosts()
Feb 23 15:01:51 ubuntu jsvc.exec[6779]: org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'null'
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Feb 23 15:01:51 ubuntu jsvc.exec[6779]: Caused by: java.sql.SQLException: No suitable driverFollowing is all the pertinent setup info for reference and critique. Any suggestions would be greatly appreciated.
Apache2.2
Tomcat6
JDBC
mod_jk
Java (not sure what ver, it's the default Ubuntu install ver.)
PHP
Currently I am pointing to mysql-connector-java.jar in my CLASSPATH at /usr/share/java/mysql-connector-java.jar added symlinks commons-dbcp.jar, commons-logging.jar to usr/share/tomcat6/lib
Application is deployed from usr/share/tomcat6/webapps/msgboard
The basic code snippet in class calling the jdbc
WEB-INF/classes/dbLink.class
Context ctx = new InitialContext();
DataSource ds = (DataSource)ctx.lookup("java:comp/env/jdbc/msgboardDB");
WEB-INF/web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app id="msgboard">
<display-name>Message Board</display-name>
<resource-ref>
<description>DB Connection</description>
<res-ref-name>jdbc/msgboardDB</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
META-INF/context.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<Context path="/msgboard" docBase="msgboard"
debug="5" reloadable="true" crossContext="true">
<Resource name="jdbc/msgboardDB"
auth="Container"
type="javax.sql.DataSource"
maxActive="100"
maxIdle="30"
maxWait="10000"
username="root"
password="thePassword"
driverClassName="com.mysql.jdbc.Driver"
url="jdbc:mysql://localhost:3306/msgboard?autoReconnect=true"/>
</Context>
I also included a symlink to this in var/lib/tomcat6/config named msgboard.xml
per instruction at http://ubuntuforums.org/showthread.php?t=430133 and have since removed it.
my.cnf
[client]
port = 3306
bind-address = 127.0.0.1
permissions set in /etc/tomcat6/policy.d/04webapps.policy
permission java.net.SocketPermission "127.0.0.1:3306", "connect,resolve,listen,accept";
per instruction at http://ubuntuforums.org/showthread.php?t=430133
other permiissions set /etc/tomcat6/policy.d/50local.policy
grant codeBase "file:/usr/share/tomcat6/webapps/msgboard/-" {
permission java.net.SocketPermission "127.0.0.1:3306", "connect,resolve,listen,accept";
grant codeBase "file:/usr/share/tomcat6/webapps/msgboard/WEB-INF/classes/-" {
permission java.io.FilePermission "/usr/share/tomcat6/webapps/msgboard/WEB-INF/classes/logging.properties", "read";
grant codeBase "jar:file:/usr/share/tomcat6/webapps/msgboard/WEB-INF/lib/mysql-connector-java-5.1.6.jar!/-" {
permission java.net.SocketPermission "127.0.0.1:3306", "connect,resolve,listen,accept";
I even tried setting Tomcat Security to "no" per instruction at
http://webui.sourcelabs.com/ubuntu/mail/user/threads/Tomcat_connecting_to_MySQL_-Ubuntu8.10_Server.meta
http://ubuntuforums.org/showthread.php?t=1034957&highlight=apache+tomcat+jdbc
http://ubuntuforums.org/showthread.php?t=66615
http://ubuntuforums.org/showthread.php?t=33601&highlight=java+mysql
http://ubuntuforums.org/showthread.php?t=430133
http://programminglinuxblog.blogspot.com/2008/03/connection-pooling-with-java-all.html
http://webui.sourcelabs.com/ubuntu/mail/user/threads/Tomcat_connecting_to_MySQL_-Ubuntu8.10_Server.meta

SOLUTION
I had to add
<Resource name="jdbc/webappDB"
     auth="Container"
     type="javax.sql.DataSource"
        maxActive="100"
     maxIdle="30"
     maxWait="10000"
        username="root"
     password="password"
     driverClassName="com.mysql.jdbc.Driver"
        url="jdbc:mysql://localhost:3306/webapp?autoReconnect=true"/>into /var/lib/tomcat6/conf/Catalina/localhost/ webapp.xml
Note: the above context file was created automatically after deploying the webapp. I had to add the <resource> to it.
The context I created in usr/share/tomcat_home/webapp/META_INF/context.xml is still there and has the same <resource>.defined in it. I did not verify whether or not it still needs to be there.
After that I had to add two policies
/var/lib/tomcat6/conf/policy.d/03catalina.policy
grant {
permission java.lang.RuntimePermission "accessClassInPackage.org.apache.tomcat.dbcp.*";
and 04webapps.policy
permission java.net.SocketPermission "127.0.0.1:3306", "connect,resolve,listen,accept";
That did the trick!
Other things that were done but have not been verified as to have any bearing on this issue.
I changed the active java from openjdk to java-sun
I added $tomcat_home/lib:$tomcat_home/lib/mysql-connector.jar:$tomcat_home/lib/commons-dbcp.jar to PATH
Changed CLASSPATH=usr/share/classpath:usr/share/java/commons-dbcp.jar:usr/share/java/mysql-connector.jar
Edited by: wlbragg on Feb 25, 2009 12:58 AM
Edited by: wlbragg on Feb 25, 2009 12:59 AM
Edited by: wlbragg on Feb 25, 2009 1:11 AM

How to add Connection URL properties - MySQL example - SOLVED

As I've spent a long time trying to fix this problem, I thought I would share the solution with the community
OK, here's the scenario - I was getting some sort of error with the SQL being generated by Crystal so I wanted to turn on the debug options for the MySQL JDBC driver. This is done by adding properties to the connection URL e.g.
I changed
jdbc:mysql://localhost:3306/test
to
jdbc:mysql://localhost:3306/test?profileSQL=true&dumpQueriesOnException=true
The problem is that when I try and use this connection string at runtime, I get an error from the JDBC driver saying that the URL is badly formed and that the parameter
dumpQueriesOnException=true?user=
is wrong.
As you can see, this quite cleary points to some mangling going on inside CR4E that is not taking account of the fact that the URL may already contain a querystring so it should append & rather than ?.
After much messing I found that this is what you need to set your Connection String to;
jdbc:mysql://localhost:3306/test?user={userid}&password={password}&
profileSQL=true&dumpQueriesOnException=true
I presume this is an issue with a lot of databases that expect stuff in the query string of the URL.
I hope it saves someone else some time.
Steve

Hi karlo Smojver,
I am also facing same issue can you please explain me how do you resolved.
Thanks,
Sudarshan

Help!!! ibook automatic sleeping after startup

my ibook fell down from the desk, the display is broken, so i remove the display and all the cable of the display. then i connect another LCD. the ibook sleeping after startup. so what's wrong with it? anybody can give a solution?

It could be that you've damaged the system which checks whether the laptop lid is closed; whatever the cause of the problem is, it sounds like you need to get it repaired if it's fallen off a desk and the display is broken!

VZaccess Manager changes WiFi connections to manually connect from automatic

VZaccess Manager changes WiFi connections to manually connect from automatic.
I have Panasonic CF-19s with VZaccess manager installed with a NDIS connection that automatically connects to Cellular service. I need my WiFI connections to also connect when available and have them set to automatically connect and managed by Windows (WiFi connection in accessmanager is set to None). When I first configure it, it works fine and we use Netmotion to decide which connection to use. After exiting VZaccess manager and restarting it, it changes my WiFi connections to "manually connect" even though accessmanager is not managing it. As soon as I exit out of Accessmanager the connections are changed back to "automatically connect". I need both connections to be active at the same time so the switchover to cellular is immediate when the WiFi connection is lost.

Hi,
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Pr
oduction
With the Partitioning, OLAP and Data Mining options
Your instance is started from the 10g ORACLE_HOME. You mentioned you started it from the 11g ORACLE_HOME but it's not the case.
Here is an example with a 10gR2 database started from a 11gR2 ORACLE_HOME :
SQL> startup upgrade pfile =/u01/app/oracle/product/10.2.0/db_1/dbs/initP102.ora
ORA-32006: BACKGROUND_DUMP_DEST initialization parameter has been deprecated
ORA-32006: USER_DUMP_DEST initialization parameter has been deprecated
ORACLE instance started.
Total System Global Area 167387136 bytes
Fixed Size                  1335248 bytes
Variable Size              88080432 bytes
Database Buffers           75497472 bytes
Redo Buffers                2473984 bytes
Database mounted.
Database opened.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsNotice the Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 part.
In your case it was Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
To solve the issue follow the official documentation, you have specific actions with oradim etc. to do (it's always a bit more complicated than with Unix/Linux but it's documented) :
http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/upgrade.htm#insertedID8
Best regards
Phil

Changing Hibernate - connection URL after startup in LCDS

Similar Messages

Maybe you are looking for