Changing Infinity dates - Eversley exchange

Hello
I've been reading these forums and I was wondering if anyone could shed some light on the continually moving dates for Infinity availability in my area. I'm attached to the Eversley exchange which according to the BT Infinity map has been enabled.
I've been waiting for the last year to get Infinity and it looked promising after calling BT sales on the 25th June, apparently it was going to be available today, the 1st July.
The problem being that having phoned today I was told that it wasn't going to be available until the 1st of September. It seems very odd that within 6 days the availability date would have moved back two months.
Sorry if this seems like a bit of a moan but any help in understanding why the dates keep on changing would be much appreciated.
Thanks

as has now been posted many times the dates given are place holders (estimates ) there are many reasons for delays for example the local power company not connecting power to the new cabinets also many places have problem's with blocked and collapsed cable ducts that need clearing and in some cases need replacing before the fibre can be laid also not all the installed in an exchange area are activated at the time the exchange is activated and indeed they could be anything from weeks to months later that September date could become either earlier or later also not all cabinets can be activated for fibre due to technical reasons
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

Can we change the Data source in AO ?

Hi Folks,
Environment: SAP HANA on AO
I have the following scenario , Am creating a report on one Calculation View: CV and have done some analysis where I have pulled in some dimensions and kept some background filters.
Now I have to generate the same report on another Calculation View: CV2 ( Similar to structure of CV ) and compare the reports. Is there any way to edit copy the previous report and change the data source? Can you guide me on that?
Regards,
Krishna Tangudu

Hi,
You can exchange the calc view by clicking on the button next to the data source name in the tab "components", but when you do this, the new data source will overwrite the settings and filters from the previous data source. So no, there is not a supported way of exchanging the datasource and keeping the filters of the previous data source.
Best regards,
Victor

Data Medium Exchange of Travel Expenses for Finland

Hi, On sap menu search "Accounting-> Financial Accounting-> Travel Management-> Travel Expenses-> Periodic Processing-> Payment via Data Medium Exchange (DME)-> Change Country Grouping"
when i try change to country finland, the following error appear :"For coutry version 44 no payment program is implemented". I need to know if exist a program for data medium exchange to Finland?
Thanks,
Sonia

You can go to SE80 -> "Choose" package - PC44 where <b>44</b>is for Finland. You`ll get programs.
see also Package = FBZ
RFEBFI00                       Bank Statement: Finland Reference Payments -
RFEBFI20                       Account Statement for Finland in TITO Format
RFEBFILUM00                    Bank Statement Finland - Conversion to Multic
RFFOFI_A                       Payment Medium (Finland) - Domestic Customers
RFFOFI_L                       Data Medium Finland - Domestic Vendor Transac
RFFOFI_U                       Payment Medium for Finland - Vendor Transacti
                                                                                Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Pdf extension changes to .dat when send a file via e-mail from adobe acrobat 9

to convert a file from microsoft word 2007 to PDF and send as an attachment via e-mail from adobe 9, the file is received with the extension changed to. dat, so recipients can not open it.
Can anyone help me with this.

What is the OS of the sending computer?
What mail client?
I receive plenty of files on my PC as .dat files, which come from Mac user(s), rename the extension to what I think they ought to be and have no further problem. (I cannot change the senders email settings where the problem originates)
If the receiver knows it is a pdf file, they can drag it into Acrobat, but renaming the extension serves future use.

Not able to change the data of test data containers in production system

Dear All,
We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System. Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data.
May be the reason is SCC4 transaction code has set the below option.
Changes and transports for client-specific Objects
u2022 No changes allowed
Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
Could you please let me know the solution for this?
Your help is really appreciated.
Thanks,
Mahendra

eCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
Let me know if you need more information
thanks
Venkat

Do we have option not to refresh the data in AP invoice while copying from GRN and change the date of the invoice in SAP 9 PL 0

Hi
I have update tax details in GRPO but while copy to AP invoice system pick posting date/ document date as system date and if i change the date the screen refresh and the tax details i have updated it change. that i do not want.
Is there any option so that GRPO date will copy in ap invoice so that i need not to refresh the screen
regards
Ashish Garg

Hi,
Please provide an example for tax details. Make note on these,
1. Whenever copy GRPO to AP invoice, posting and document date is system date. This is default design system
2. If you change these dates in AP invoice, your payment to vendor leads to confusion.
For example:
You have received items on 25-03-2014. But vendor raised invoice on 03/04/2014.
Thanks & Regards,
Nagarajan

Changing color of a field after changing the data using OOPS ALV.

Hi Experts,
I have displayed three fields (price, no. of products and total amount) in my ALV grid using OOPS.
Then am changing the data in either price or no. of products fields. When I click ENTER key the value in total amount changes correspondingly. Am able to achieve till this point.
Now I have to change the color of the three fields( price, products and total amount) of the affected row alone and not the entire set of rows in the output grid.
Please provide suggestions.
Thanks in advance.

Hi,
You have to use Layout and Output data in your OO ALV. The below code is using FM you can replicate it in OO ALV
types: begin of t_data,
         flg(3) type c,
         sty    type lvc_t_styl,
         col    type lvc_t_scol,
       end of t_data,
       t_tdata type table of t_data.
constants: c_red type i value '255',
          c_g   type i value '1'.
DATA: i_fcat type LVC_T_FCAT,
      s_fcat type lvc_s_fcat,
      s_lay type lvc_s_layo,
      s_sty type lvc_s_styl,
      s_col type lvc_s_scol,
      i_data type t_tdata,
      s_data type t_data.
s_lay-stylefname = 'STY'.
s_lay-CTAB_FNAME = 'COL'.
s_fcat-FIELDNAME = 'FLG'.
APPEND s_fcat to i_fcat.
CLEAR: s_data.
s_data-flg = 'Yes'.
s_sty-FIELDNAME = 'FLG'.
s_sty-style = CL_GUI_ALV_GRID=>MC_STYLE_HOTSPOT.
insert s_sty into TABLE s_data-sty.
s_col-fname = 'FLG'.
s_col-color-col = 6.
s_col-color-inv = 1.
insert s_col into table s_data-col.
APPEND s_data to i_data.
CLEAR: s_data.
s_data-flg = 'No'.
s_sty-FIELDNAME = 'FLG'.
s_sty-style = CL_GUI_ALV_GRID=>MC_STYLE_HOTSPOT_NO.
insert s_sty into TABLE s_data-sty.
APPEND s_data to i_data.
CLEAR: s_data.
s_data-flg = 'No'.
s_sty-FIELDNAME = 'FLG'.
s_sty-style = CL_GUI_ALV_GRID=>MC_STYLE_HOTSPOT_NO.
s_col-fname = 'FLG'.
s_col-color-col = 6.
insert s_col into table s_data-col.
insert s_sty into TABLE s_data-sty.
APPEND s_data to i_data.
CLEAR: s_data.
s_data-flg = 'Yes'.
s_sty-FIELDNAME = 'FLG'.
s_sty-style = CL_GUI_ALV_GRID=>MC_STYLE_HOTSPOT.
insert s_sty into TABLE s_data-sty.
APPEND s_data to i_data.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
   IS_LAYOUT_LVC                     = s_lay
   IT_FIELDCAT_LVC                   = i_fcat
TABLES
    T_OUTTAB                          = i_data
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
ENDIF.
Thanks,
Kiruba

Unable to change the data in PSA

Hello All,
I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
Could you please let me know how will i see all columns from PSA. Thanks
Regards,Ashok

Hi Ashok,
To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
Also if you want to see say all the failed records you can sort the order of the data using the Status column

Unable to change the data source of SAP system

Dear all,
We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
while installation i have given the central SLD system as solman,
By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
Request please let me know how to resolve this issue.
Thanks
Paresh

Hi Paresh,
You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!) to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
Hope this helps sort out your issue.

Change posting date during UD Reversal

Hi All
During working with a UD reversal program by using SAP note 175842 i came to know that the posting date only comes as the current date.
If Today i am reversing the UD of a batch which is 15 days old (Example-15.02.2014) then the posting date in the material document will be of today.
But my requirement is that, date should be the actual inspection lot creation date ie. 15.02.2014 . I have already discussed with the technical team , as
per their understanding no option is there to edit the standard program.
Please help me in this regard, is there any option to change the posting date.
Regards
D Mohanty

Hi,
I understand that you are looking to make 322 movement today but need posting date/ document date in past. I tried my reversal program and I could achieve this. While making the UD reversal, change the date which is required.
In following case, I made the 321 today but in back posting date i.e 15.02.14. For this, refer Document date.
Then again, while making the reversal, I entered the backdate (20.02.14) and same is appearing for the document. Refer 322 movement.
Ofcourse you need to allow posting in previous periods using MMRV.
If you need something else, please come up again.
ntn

Change Log Data from DSO to CUBE

Hi Experts,
Is it possible to load/transfer change log data as well from DSO to Cube
Thanks

Hi,
Yes it is possible.
Create a DTP from DSO to cube.
In the extraction tab of DTP choose the option
Datasource Change log
Hope it Helps!!
Reward if useful
Manish

Changing Loading Date

Dear All
Pl let me know the process of changing "Loading date" and appering in Open Sales Order Report ( T Code VL10 )
Regards
Ramesh Barve

Hi
I tried VA02 and all other steps as suggested by you. But it is not working. I can not change Loading date as per your suggested way.
Anyways, thanlks for showing interest and replying my query.
Regards
Ramesh Barvee

Change delivery date on sales order -- change of Billing date on item

Hi,
We are trying to change a delivery date for a sales order's item, if we do so normally the billing date on that item's billing tab will change automatically also.
Now, for a specific sales order the billing date in the billing tab is not changing.
We compared 2 sales orders .. the same statusses - no blocks - ... and with one it works (changing of the billing date) and with the other it does not work..
Please help !
thanks a lot!

Hi,
Check the following.
If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date.
If you are billing services, the system proposes the date of services rendered. You can change the date manually in the sales document.
If you are using a billing plan to bill a project, the system can propose billing dates for the billing plan on the basis of planned or actual dates in the corresponding milestone.
In a billing plan for a maintenance or rental contract, you can specify rules by which the system determines billing dates on the basis of other dates in the contract.
Regards
Nadarajah Pratheb

Crystal ActiveX Runtime Lib: Change text data source path at run time.

We have some PCs running Crystal Reports 10 and some running CR 9 and 8.5. For each PC, we set up a System DSN ODBC data source (in Control Panel - Administrative Tools) for pulling data from text files to
generate reports.
Recently we wrote some routines (see the Visual Basic example at the
end of this message) to change the path of the data files at runtime.
According to the Crystal Reports Technical Reference Guide, we may use
the method LogOnServer() of an Application object or an DatabaseTable
object. However, we find that this does not work: the PrintOut()
method only pulls data from the default path as configured for the
System DSN, not from the path passed as the third parameter of
LogOnServer(). It does not return any error message.
We have also tried to use SetTableLocation() method, and it still does
not work.
Would any experts examine our code below and advise what we are missing? Thanks.
For the following VB example, we have:
System DSN Name: AP_WORKSHEET
Driver: Microsoft Text Driver
Database Directory: D:\0ood2 (i.e. the default path)
Crystal Report Document: D:\3g\run\Vision\apcyto\Reports\crBlockWS.rpt
(Which specifies that the data source text file name is BlockWS.txt)
Purpose : We would like to read the data source text file from
D:\0ood1 instead of the default path.
Following is the code of the VB macro:
Sub test()
Rem In this version of the subroutine, we call
Rem DatabaseTable.LogOnServer() and "Rem"ed out
Rem Application.LogOnServer() and SetTableLocation().
Rem We have un"Rem"ed each of them and "Rem"ed others and try to run.
Rem In all runs, data are pulled from the default file
Rem D:\0ood2\BlockWS.txt instead of D:\0ood1\BlockWE.txt.
Dim crxapp As CRAXDRT.Application
Dim crxRep As CRAXDRT.Report
Dim crxDB As CRAXDRT.Database
Dim crxTab As CRAXDRT.DatabaseTable
Dim crxConnPs As CRAXDRT.ConnectionProperties
Dim crxConnP As CRAXDRT.ConnectionProperty
Dim apropSubLoc As String
Dim apropConnBufStr As String
Set crxapp = CreateObject("CrystalRuntime.Application")
Rem
crxapp.LogOnServer "p2sodbc.dll", "AP_WORKSHEET", "<CRWDC>DBQ=D:\0ood1",
Set crxRep = crxapp.OpenReport
("D:\3g\run\Vision\apcyto\Reports\crBlockWS.rpt")
Set crxDB = crxRep.Database
Set crxTab = crxRep.Database.Tables(1)
apropConnBufStr = crxTab.ConnectBufferString
apropSubLoc = crxTab.SubLocation
crxDB.LogOnServer "p2sodbc.dll", "AP_WORKSHEET", "<CRWDC>DBQ=D:\0ood1",
Rem crxTab.SetTableLocation "D:\0ood1\BlockWS.txt", apropSubLoc, "DSN="
Rem Set crxConnPs = crxTab.ConnectionProperties
Rem Set crxConnP = crxConnPs.Item("DSN")
Rem crxConnP.Value = "AP_WORKSHEET"
Rem Set crxConnP = crxConnPs.Item("Database")
Rem crxConnP.Value = "D:\0ood1\BlockWS.txt"
Rem crxTab.Location = "BlockWS.txt"
crxRep.DiscardSavedData
crxRep.PrinterSetup (0)
crxRep.PrintOut
End Sub
For VB macros, the problem exists in all of CR 8.5, 9 and 10. However,
for another platform we are using, Unify Vision 4GL, it works for CR
8.5 while not working for CR 9 and 10.
Following is the source code in Unify Vision 4GL. This language may
not be popular, but I thin you are about to see how it calls the
Runtime Library methods LogOnServer(), OpenReport(), PrinterSetup() and
PrintOut().
%gfPrintCrystalReport
BOOL FUNCTION gfPrintCrystalReport($reportName)
BEGIN
if NOTMKNOWN(GF:$oSeagateId) then
create service of activex
class 'CrystalRuntime.Application'
object_ref into GF:$oSeagateId;
if MKNOWN(GF:$oSeagateId) then
begin
/* TD23013: Database directories are dynamic to
accommodate multiple user requirement of Citrix */
send message LogOnServer to GF:$oSeagateId
using
( 'PDSODBC.DLL', 'AP_WORKSHEET', '<CRWDC>DBQ='+GF:$WinTempDir,'','')
identified by $msgHandle;
if $msgHandle:MSG_STATE 'RESPONSE_PROCESSED'
then
begin
display 'Crystal Reports cannot connect
to the datasource ' for fyi_message wait;
return (FALSE)
end
send message OpenReport to GF:$oSeagateId using
($reportName, 1)
identified by $msgHandle returning
$oCrystalReport
if MKNOWN($oCrystalReport) then
begin
if (NOTMKNOWN(GF:$printerName)) then
set GF:$printerName to
$oCrystalReport->PrinterName;
if GF:$printerName $oCrystalReport-
PrinterName then
send message SelectPrinter to
$oCrystalReport
using
(GF:$driverName,GF:$printerName,GF:$portName)
identified by $msgHandle;
set $oCrystalReport-
DisplayProgressDialog to FALSE;
while TRUE
begin
DISPLAY NOTICE 'Print to : ' +
GF:$printerName
LABELS 'Ok'
DEFAULT, 'Cancel', 'Printer Setup'
RESULT INTO $userOption
switch ($userOption)
begin
case 0 :
send
message PrintOut to $oCrystalReport
using
(PROMPT_USER, NUMBER_OF_COPIES, COLLATED, START_PAGE, STOP_PAGE)
identified by $msgHandle;
set
$oCrystalReport to UNDEFINED
return
(TRUE);
case 1:
set
$oCrystalReport to UNDEFINED
return
(FALSE);
case 2:
send
message PrinterSetup to $oCrystalReport
using
(0)
identified by $msgHandle;
if
GF:$printerName $oCrystalReport->PrinterName then
begin
set GF:$printerName to $oCrystalReport->PrinterName;
set GF:$driverName to $oCrystalReport->DriverName;
set GF:$portName to $oCrystalReport->PortName;
end
break;
end
end
end
end
return
(FALSE);
END

Hi Sydney,
If you search the Developers help file you'll find info on using the method:
How to change the data source
This example demonstrates how to change the data source from native Access to an OLEDB (ADO) data source by using the ConnectionProperty Object, as well as how to change the table name by using the Location property of the DatabaseTable Object. CrystalReport1 is connected to the xtreme.mdb database found in the \Program Files\Crystal Decisions\Crystal Reports 10\Samples\En\Databases folder. The report is using the Customer table. A copy of the Customer table is added to the pubs database on Microsoft SQL Server.
' Create a new instance of the report.
Dim Report As New CrystalReport1
Private Sub Form_Load()
' Declare a ConnectionProperties collection.
Dim CPProperties As CRAXDRT.ConnectionProperties
' Declare a DatabaseTable object.
Dim DBTable As CRAXDRT.DatabaseTable
' Get the first table in the report.
Set DBTable = Report.Database.Tables(1)
' Get the collection of connection properties.
Set CPProperties = DBTable.ConnectionProperties
' Change the database DLL used by the report from
' native Access (crdb_dao.dll) to ADO/OLEDB (crdb_ado.dll).
DBTable.DllName = "crdb_ado.dll"
' The connection property bags contain the name and value
' pairs for the native Access DLL (crdb_dao.dll). So we need
' to clear them, and then add the name and value pairs that
' are required to connect to the OLEDB data source.
' Clear all the ConnectioProperty objects from the collection.
CPProperties.DeleteAll
' Add the name value pair for the provider.
CPProperties.Add "Provider", "SQLOLEDB"
' Add the name value pair for the data source (server).
CPProperties.Add "Data Source", "ServerA"
' Add the name value pair for the database.
CPProperties.Add "Initial Catalog", "pubs"
' Add the name value pair for the user name.
CPProperties.Add "User ID", "UserName"
' Add the name value pair for the password.
CPProperties.Add "Password", "password"
' Set the table name. ' for SQL types it would be "database.dbo.table"
DBTable.Location = "Customer"
Screen.MousePointer = vbHourglass
' Set the report source of the viewer and view the report.
CRViewer1.ReportSource = Report
CRViewer1.ViewReport
Screen.MousePointer = vbDefault
End Sub

Any one knows how to change "TransptnPlanng date" in delivery document?

Deal All,
Could any one provide the BAPI/FM that can change "TransptnPlanng" date/time in inbound/outbound delivery documents?
I need to update the dates only in ABAP program based on external information.
I tried WS_DELIVERY_UPDATE with the following parameters setup:
VBKOK_WA-VBELN_VL = target delivery number
VBKOK_WA-TDDAT = "12/12/2009"
VBKOK_WA-TDUHR = "12:12:12"
(for the other fields in structure VBKOK_WA, I leave them blank)
DELIVERY = target delivery number
After run the FM in test mode, no error returns but no data updated in the delivery... (dates not change)
Do I need to specify all the other fields for the delivery (like delivery date, line item details etc) even though I just want to update two fields in the header of the delivery?
Thanks & Regards,
Wenling

BAPI_OUTB_DELIVERY_CHANGE works in this case (just to change the date)
Need to put "X" on the date field on structure BAPIOBDLVHDRCTRLCHG and need to use table BAPIDLVDEADLN with correct date type to update.
Thank you all for your replies.

Changing Infinity dates - Eversley exchange

Similar Messages

Maybe you are looking for