Changing netbeans_default_options has no effect?

I have tried creating a large C++ project via "Create C/C++ project from binary file" and have run into out of memory exceptions while the IDE parses the sources.
I tried to work around this following the advice in the "What's New in the Oracle Solaris Studio 12.3 Release" document, i.e. adding a -J-Xmx2048m - switch to the netbeans.conf file in lib/netbeans/etc, but apparently, this is ignored. In the IDE logfile I see that the IDE is still invoked with the automatically determined value -Xmx1024m. Also any other switches I tried to insert there (-J-XX:+UseConcMarkSweepGC, for example) are obviously ignored.
Does this not work as documented? Is there any other mechanism for this?
I use JDK version 6.0_30 on Solaris 10/x86 on a machine with 8G RAM.

Thanks. Now this works.
The mentioned document which refers to lib/netbeans/etc/netbeans.conf should, IMHO, be changed.

Similar Messages

Remote content bar does not appear for some emails with images specifically daily Twitter updates. Changing options to allow all remote content has no effect

The broken image symbol appears in place of the images but associated web links do work ok.
Changing options to allow all remote content has no effect. Senders' addresses are in my address book and on the exceptions list.
Some emails (from other sources) load perfectly. Using Kaspersky Internet Security 2015 on Windows 8.1. Thunderbird 31.4.0
Any help appreciated.

You only need to post a URL to your web site. We can see your code in Browser.
So, your page looks OK to me in Firefox, but when I tried to check it in IE, it choked my browser and closed it.
You have quite a few code validation errors - no document type declaration, etc... Start by fixing these reported errors.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fntp.neuroscience.wisc.edu%2F
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Changing bounds origin of UIView has no effect

I try to pan/scroll a big image(500x500) in a small frame (200,200) like in Google Maps. Changing bounds origin of UIImageView has no effect. The same part of image is displayed by the view.
IBOutlet UIImageView *image;
-(void)touchesEnded:(NSSet*)touches withEvent:(UIEvent*)event
CGRect bounds=[image bounds];
bounds.origin.x=bounds.origin.x+10;
bounds.origin.y=bounds.origin.y+10;
[image setBounds:bounds];
Does anyone have any idea what is wrong?

Ok, I found out what's wrong.
To "pan" an image you have to change bounds origin of PARENT view.
- (void)applicationDidFinishLaunching:(UIApplication *)application {
CGRect viewRect = CGRectMake(50, 50, 100, 100);
UIView* myView = [self createView:viewRect withColor:[UIColor redColor]];
UIView* childView = [self createView:CGRectMake(0, 0, 50, 50) withColor:[UIColor blueColor]];
[myView addSubview:childView];
[window addSubview:myView];
myView.clipsToBounds=TRUE;
myView.bounds=CGRectMake(45, 45, 100, 100);
[myView release];
[childView release];
[window makeKeyAndVisible];
-(UIView*) createView:(CGRect)viewRect withColor:(UIColor*)color
UIView* myView = [[UIView alloc] initWithFrame:viewRect];
myView.backgroundColor=color;
return myView;
}

Wrong Channels Being Mapped for 5.1 - Changing Has No Effect.

I just setup a new edit suite using a Blackmagic Decklink Extreme 3D Card, running on a PC with Windows 7.
Initially my 5.1 channel mapping required altering in Premier to get the correct output to the correct speakers but once sorted all worked great.... until today! For some reason no matter what I do some of the channels are now mixed up, and changing the mapping preferences has no effect. I am getting the Centre channel coming from the Rear Right and Rear Left is coming out of the Sub! I have my preferences set to output from the BlackMagic Audio Device, but even swapping left and right channels has no effect.
If I flick over to Audition and map the channels for a 5.1 mix it works fine and has the correct output which I guess rules out a problem with the DeckLink. This is REALLY frustrating me, any suggestions or advice on what could be the issue with premier would be greatly appreciated!

Moderator advice: Please read the announcement(s) at the top of the forum listings and the FAQ linked from every page. They are there for a purpose.
Then edit your post and format the code and CSS correctly.
db

Change of Min Pool Size has no effect?

Hi, we are still using odp 9.2.0.4 on windows server 2003 webserver and oracle database 9i on Sun solaris. Recently we discovered a problem using Min Pool Size = 1, it seems that if new connections are required we sometimes get a connection timeout. So we decided to set Min Pool Size = 30, and on the testserver this works fine. In the odp tracefile (tracelevel=2) you see the 30 connections building up immediately. But on the production server we see no difference, it looks like the (new installed, application pool reset) application still uses the Min Pool Size = 1 setting.
The connection string is build up in application code. On the testserver it was sufficient to stop and start the website and its application pool, on the production server this has no effect.
Does anyone have an idea what the problem is??? We also tried restarting the IIS server, that did not help either. In production there are more applications using ODP.
Regards, Paul.

What problem are you trying to solve at this point? Simply "why is odp not tracing?" The only suggestions I really have there are
1) make sure you restart the app after enabling tracing parameters
2) make sure the directory you've set tracing to is open as far as permissions
3) make sure you've set tracing in the right registry setting if you have multiple versions of ODP installed
4) if you're trying to write to c:\ root, try creating and pointing to a different (c:\odptrace for example) directory instead.
Hope it helps,
Greg

Widescreen setting in video - tv out has no effect

after a couple of hours of experimentation, i have concluded that the widescreen setting (on/off) in the tv out section of the video settings has no effect. i believe what it SHOULD do is adjust the signal to display properly on a widescreen (16x9) tv. i believe it does nothing. video displays stretched and squashed (photos too btw). this is after experimenting with the same itunes-purchased and non-itunes purchased videos on both my ipad and my iphone 3gs, using the same tv and the apple component av cable. the iphone works fine. the only way to get a semi-acceptable display on the tv with the ipad is to the set to tv to normal 4x3 display. (late model sony lcd hdtv). then you get thick black bars around the picture. with the iphone i can leave the tv display setting at it's regular "full" option and the picture fills the screen properly. i tried both sd and hd videos on the ipad. (sd only on the iphone obviously). does anyone else have this issue? is there a bug in the ipad software? is there a problem with MY ipad? will a software restore help?
Message was edited by: Michael Rosenberg

i tried a fair amount of stuff. here's 2 examples:
1) itunes store copy of an episode of the office in both hd and sd.
2) digital copy of the new star trek movie
so the first is 16x9 and the second is a widescreen movie 2.35-1.
both look fine when playing back off the iphone 3gs (sd copy of the office). both looked stretched horizontally and squashed vertically when playing off the ipad. note that everything looks fine on the ipad itself. it just messed up when connecting
the ipad to my tv. in all cases, the widescreen setting in the tv out section of the video panel on the ipad has NO effect.
i can change the screen settings ON THE TV to fix the distortion but then i end up with thick black bars on all 4 sides. and i don't need to do this with the iphone 3gs. i continue to believe something is wrong with the ipad (or MY ipad).

ADF Faces 10.1.3.0.4 - two-digit-year-start has no effect?

Hi all,
I have problem with entering date with an af:selectInputDate control:
the user enters the date and on an onblur event, the adf field
automatically reformats it:
10.10.10 ->10.10.2010
10.10.60 ->10.10.1960
The user (customer) wants 2 things to change:
1. if the given two digit year <= actual year (06):
10.10.06 ->10.10.2006
otherwise
10.10.07 ->10.10.1907
2. by entering a date, adf have to be accept the date without dots too:
101006 ->10.10.2006
1.: I tried to set theconfig param: <two-digit-year-start>2006</two-digit-year-start> (or with an EL expression) in the adf-faces-config.xml but it has no effect.
Is it a totally wrong idea or is it a bug?
Any other idea?
2.: Is it possible to solve this problem with a built in control or converter? Or do i have to write my own converter?
Thanks for any help!

The exception is gone - I must have had something wrong in my classpath. However, I still see the warnings. Are those warnings expected when using ADF in conjunction with myfaces?

Show Details in pagetoolbar-options - property has no effect?

Hello all
When I set the property-value in the pageToolBar-iView for the Details it seems to have no effect:
When I save and preview the whole thing, the option "Details" is still available...
When I change the options for everything else (Reload, Add to Favourites, ...) it has immediate effect.
By the way - although I don't want it - I also can't remove the caption/title of the current view in the pageToolBar.
Any help or explanation is greatly appreciated.
Regards
Michael

Hi Vineeth
Thanks so far for your reply.
Of course, this could be due to some server-/proxy-side caching, although I doubt that in my case.
I already made the same settings on the productive-portal and experience the same behaviour there, which surprises me a little.
I'll simply wait about a week, maybe the problem will vanish by itself (rather I'll wait for the proxy or any other cache to un-cache it).
I'll post my experiences.
Regards
Michael

DHCP_TIMEOUT in /etc/conf.d/netcfg has no effect

I want to set DHCP_TIMEOUT to 30 for all netcfg profiles. On this page in wiki it is suggested to set the variable in /etc/conf.d/netcfg. But this has no effect. I tried 'NETCFG_DEBUG="yes" netcfg <arguments>' and the timeout was still 10.
How can I set DHCP_TIMEOUT for all profiles without editing every profile?

opt1mus wrote:Could you paste into this thread your /etc/conf.d/netcfg and the debug output. It's easier for people to help with troubleshooting when actual output is to hand.
Here it is (network names changed):
# cat /etc/conf.d/netcfg
# Enable these netcfg profiles at boot time.
# - prefix an entry with a '@' to background its startup
# - set to 'last' to restore the profiles running at the last shutdown
# - set to 'menu' to present a menu (requires the dialog package)
# Network profiles are found in /etc/network.d
NETWORKS=(network1 network2)
# Specify the name of your wired interface for net-auto-wired
WIRED_INTERFACE="eth0"
# Specify the name of your wireless interface for net-auto-wireless
WIRELESS_INTERFACE="wlan0"
# Array of profiles that may be started by net-auto-wireless.
# When not specified, all wireless profiles are considered.
#AUTO_PROFILES=("profile1" "profile2")
DHCP_TIMEOUT=30
# NETCFG_DEBUG="yes" netcfg network1
DEBUG: Loading profile network1
DEBUG: Configuring interface wlan0
:: network1 up [ BUSY ] DEBUG: status reported to profile_up as:
DEBUG: Loading profile network1
DEBUG: Configuring interface wlan0
DEBUG: wireless_up start_wpa wlan0 /run/network/wpa.wlan0/wpa.conf nl80211,wext
Successfully initialized wpa_supplicant
DEBUG: wireless_up Configuration generated at /run/network/wpa.wlan0/wpa.conf
DEBUG: wireless_up wpa_reconfigure wlan0
DEBUG: wpa_cli -i wlan0 -p /run/wpa_supplicant reconfigure
DEBUG: wireless_up ifup
DEBUG: wireless_up wpa_check
DEBUG: Loading profile network1
DEBUG: Configuring interface wlan0
DEBUG: ethernet_up bring_interface up wlan0
DEBUG: ethernet_up dhcpcd -qL -t 10 wlan0
DEBUG:
> DHCP IP lease attempt failed.
DEBUG: Loading profile network1
DEBUG: Configuring interface wlan0
DEBUG: Loading profile network1
DEBUG: Configuring interface wlan0
DEBUG: ethernet_down bring_interface flush wlan0
DEBUG: wireless_down stop_wpa wlan0
DEBUG: wpa_cli -i wlan0 -p /run/wpa_supplicant terminate
DEBUG: profile_up connect failed

Media Keys Recognized Correctly Using Xev but pressing has no effect.

On g15 keyboard Xev maps the multimedia keys correctly
(KeyPress event, serial 35, synthetic NO, window 0x5600001,
root 0x10c, subw 0x0, time 5432517, (160,-5), root:(1123,826),
state 0x0, keycode 172 (keysym 0x1008ff14, XF86AudioPlay), same_screen YES,
XKeysymToKeycode returns keycode: 162
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
but Clementine doesn't react when the key is pressed.
I don't know what changes but rebooting can fixes / creates the problem randomly.

*vitali* wrote:I have kde 4.5.0 , and I am not messing with xev merely checking that the keys are detected correctly.
I have g15daemon , g15composer, g15macro, g15stats, libg15, lib15render installed.
The media keys are detected when setting them in the global shortcut for clementine, but pressing them has no effects (works on some reboots as i mentioned).
Hmmm....G15 media keys works out-of-the-box for Amarok. I can experiment on my box once I'm through with work in a few hours.
Looking at the Clementine bugtracker-there's an open bug regarding multimedia keys on Win7 and Clementine already. I'll play later-but I'm thinking this is something to post on their bug tracker.

Runtime.setCustomMenuItemChecked has no effect

This method seems to be bugged, it has no effect in Reader (9/X):
runtime.addCustomMenuItem("myitem", "My Item", "checked", 1);
runtime.setCustomMenuItemChecked("myitem", 0);
The menu item "My Item" remains in the checked state (and vice-versa). Is there a workaround?
Alexander

Satellite L655D-S5110
I had that happen on somebody's laptop (not a Toshiba) the other day. Turned out the default audio output needed to be changed. It's in here.
Control Panel > Sound > Playback tab > select (whatever it was) > click the Set Default button
I've seen this question here before. Please let us know what you find in there.
-Jerry

Brightness meter has no effect in Windows 8

I upgraded to Windows 8, and now I can't change the screen brightness. The F1/F2 keys do alter the brightness meter in the Boot Camp Control Panel, but this level has no effect on the actual brightness of the screen.

Windows 8 is not supported by Bootcamp. There are no Windows 8 Bootcamp drivers.

Language Selection in UDI has no effect

I started
this topic while ago on ConfMgr forum, but I didn´t get any decent answer, I also found
this Blog but it doesn´t work for me with MDT 2013
I have MDT 2013 integration in ConfMgr 2012 R2 and I use MDT based Task Sequence with UDI. If I select any language from UDI page, the selection has no effect. It will be installed as UK. I use native unattended.xml from MDT Settings package.
Could someone confirm, does it even works or not? Only selection which works from that page, is the GUI language itself since I have integrated Language Packs to my image, but keyboard layout and user locale are always UK.
I also tried;
- to set default variables of languages in TS
- to use simple unattended file done with wism
- MDT files and settings packages are updated to DP after change

Hi ,
I'm using MDT 2013 (hacked to use UDI deployments without SCCM) and have exactly the same behaviour.
Did you ever crack this one?
Why is UN-GB not an optional language pack available in the UDI designer Microsoft!!

HT5024 It states that it takes 24hrs for changes to come into effect. However, what does it mean that it may retains my review in the system indefinitely, so if I rate it 1 star by accident, and changed it to rate 5 stars, the 1 star rating is not removed

It states that it takes 24hrs for changes to come into effect. However, what does it mean that it may retain my review in the system indefinitely? So if I rate it 1 star by accident, and changed it to rate 5 stars, the 1 star rating is not removed?

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

GetStylesheets().add("css_file") has no effect for Scene in JFXPanel

I'm using Netbeans 7 to build a JavaFx application that has a Swing UI with a JFXPanel. No matter what I try, I can't get the scene to use my stylesheet.
The content of my CSS file is correct. E.g.:
.my-component {
-fx-border-color: black;
-fx-border-width: 2;
-fx-border-radius: 10;
-fx-background-color: #CCFF99;
-fx-background-radius: 10;
The path to the CSS file is correct. (e.g. "/packagename/mystyle.css"), I've also tried:
String css = Main.class.getResource("mystyle.css").toExternalForm();
scene.getStylesheets().add(css);
My node (a BorderPane) is set to use the CSS class :
comp2.getStyleClass().add("my-component");
I've verified the syntax by changing it to one of the built-in classes e.g. "button" and the results are seen in the UI.
But I can't get anything from my CSS file to work. There are no error messages logged or exceptions thrown. I can fill the CSS file with nonsense errors and it has no effect.. it's like the file isn't being used at all.
When I use the SAME CSS file in a pure JavaFX application, that is, NOT using JFXPanel, I see a warning if the path to the CSS file is wrong: "WARNING: com.sun.javafx.css.StyleManager$2 run Resource "null" not found."
When the path is correct in that case, it seems to work fine.
What could be the problem?

Moderator advice: Please read the announcement(s) at the top of the forum listings and the FAQ linked from every page. They are there for a purpose.
Then edit your post and format the code and CSS correctly.
db

Changing netbeans_default_options has no effect?

Similar Messages

Maybe you are looking for