Changing or deleting priority of a message

Is there any way to remove the priority exclamations from an incoming message? I have people that always send me messages from exchange marked as high priority and when I sort my flag these always come up.
Is there not any way to remove or change the priority of the original incoming message?
Thanks,
matt

There is a priority you can set in the message properties on enqueue, then you can dequeue using a priority. There is also a delay message property which defines how long it is until the message becomes eligible for dequeueing. So if you want to enqueue multiple messages and want some to be picked up prior to others then you can use the delay property to 'hide' the lower priority messages until you have processed the high priority messages.

Similar Messages

How to change the priority level of message sent to market place.

Hi to all gurus,
I have rasied a query at market place. I raised the query with medium priority and now want to change it to high or very high priority as user is badly in need of the module for which the query is raised.
How can i changed the priority of this message while I have not yet got reply for the same from SAP and the status is under process.
Thanks and Regards

Hello
The hotline number of your local Support Customer Interaction can be found in SAP note 560499 - Global Support Customer Interaction.
Either phone call or email and they will raise the priority accordingly.
Regards
Michael

Recently my iPhone 4 has started to delete the content of messages as soon as I open them and also is changing the names of some of my contacts from the name that I give them to their email addresses and all of this is without any input from me help!

My iPhone 4 has started to delete the content of messages automatically as soon as I open them and is also changing some of my contact names from their names to their email addresses. Help!

I've had the same problem with the names being changed to email addresses.Did you ever find out how to stop this ?

I have sent invites to my photo stream but invitees are getting the message that the photo stream may have been changed or deleted - it hasn't. What do I do?

I have sent invites to my photo stream but invitees are getting the message that the photo stream may have been changed or deleted - it hasn't. What do I do?

Have you tried here:
iCloud: Troubleshooting iCloud Photo Sharing and Shared Photo Streams

Email was working fine. Now not working even though nothing changed. Deleted acct turned off iPad turned on and added account again. Can receive mail but not send. Sometimes says relay not allowed sometimes different message.

Email was working fine. Now not working even though nothing changed. Deleted acct turned off iPad turned on and added account again. Can receive mail but not send. Sometimes says relay not allowed sometimes different message.

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if you can then send emails

Can not change or delete Calendar Entries in Wiki

Hi all - thx for listening :-)
Situation:
Server OS X 10.6.8
Group Wiki with Calendar running
All users belong to the same group
All users can log in via Safari or Firefox
Wiki calendar running, worked fine over a long period
Several "calendars" (I tend to call them categories; strange wording from Apple here…) were created
Without changes to the system, single users suddenly could not make calendar entries or were able to create one and a second later when trying to change the same entry got the message: "You are not allowed to see this calendar"
We were able to ignore this for some single users for a while but now…
There are calendar entries, mostly repeated weekly dates, that can not be deleted or changed by any user. When we try to delete these, we do NOT get any "deleting from server"-status box, just a blank return to the wiki calender page.
When we try to change the dates (e.g. set a new weekday, repeat-period, category (=calender) etc) , we DO get the "deleting from server"-status box, but the time-wheel keeps on rolling for hours without any impact
What I tried out so far:
• repair permissions
• restart
Web Server error log:
[Thu Aug 23 15:19:13 2012] [error] [client 192.168.178.20] File does not exist: /Library/WebServer/Documents/collaboration-availability, referer: …
Wiki Server error log: (line repeats over and over again:)
2012-08-23 15:56:15+0200 [-] 127.0.0.1 - - [23/Aug/2012:13:56:15 +0000] "POST /RPC2 HTTP/1.0" 200 131 "-" "Twisted/XMLRPClib"
Desperately seeking help… Much thanks in advance :-)

Hi Fellows,
I finally found a workaround!
1. Locate /Library/CalendarServer/Documents/ and ADD local admin to permissions-list with R/W rights (I did not change the existing permissions to keep the calenderas working in the wiki
2. Transfer permissions to all files in this folder
3. locate the folder /Library/CalendarServer/Documents/calendars/__uids__/wi/ki
4. locate the folder named after the wiki in which you want to change your calenders. Inside of it, you will find subfolders with several .ICS-files.
5. Select one .ics-file and hit space to activate quicklook. quicklook will show you the name and dates of the calendar entry
6. Find the desired calendar entry by moving up/down with the arrow keys and delete it - it will dissapear in the wiki after e browser refresh.
Not really elegant but efficient if you are annoyed by looking at obsolete calendars. :-)
Hope you all find this useful too - feedback welcome.
Message was edited by: Hooohn; spelling corrections only

How to change the delay for a specific message

Hi,
I need to change the delay for an specific message, So how can I consume message by JMSCorrelationID which is enqueued with delay?
I am using Java and Oracle.JMS classes.
This a sample code of the deque method
public BasicAQData dequeue(int insId)
try
     String usr = dbUtil.getCurrentUser();
     AQjmsStreamMessage stream_message = null;
     int id = 0;
     int priority = 0;
     int destino = 0;
     String selector = null;
     String instanceId = String.valueOf(insId);
     BasicAQData dd = new BasicAQData();
     queue = q_sess.getQueue(usr, queue_name);
     selector = "JMSCorrelationID = '"+instanceId+"'";
     receptor = q_sess.createReceiver(queue, selector);
     stream_message = (AQjmsStreamMessage)receptor.receive(sleeptime);
     if (stream_message == null) return null;
     id = stream_message.readInt();
     priority = stream_message.readInt();
     destino = stream_message.readInt();
     stream_message.clearBody();
     dd.setId(id);
     dd.setPriority(priority);
     dd.setDestino(destino);
return dd;
It returns the desired message if that is available; however it returns null if the message was enqueued with delay and isn4t still available.
Thanks in advance.

Hi Glenn,
Messages enqueued with a delay can be dequeued by specifying message id. In your example,
you can dequeue the message with message_id, change the delay and enqueue the message again.
Thanks,
Brajesh.

In iphoto how to get the gold you delete a photo warning message when you check the box not ask

in iphoto how to get the gold you delete a photo warning message when you check the box not ask

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

After I change iPhone 5 to 6 , my message app doesn't work properly.

After I change iPhone 5 to 6 , my message app doesn't work.
1. messages history may suddenly disappear ,after i restart phone , it comes back.
2. sent text from contacts, wont see message history or crash. after send message, all history will come back.
3. open message app always very slow.
I nv delete my message since 2010. So there is alot of messages ( estimate 40K messages) in my phone. however, when i was using iphone 5, it works fine.

After I change iPhone 5 to 6 , my message app doesn't work.
1. messages history may suddenly disappear ,after i restart phone , it comes back.
2. sent text from contacts, wont see message history or crash. after send message, all history will come back.
3. open message app always very slow.
I nv delete my message since 2010. So there is alot of messages ( estimate 40K messages) in my phone. however, when i was using iphone 5, it works fine.

Why is the next message no longer selected when I delete/move the previous message?

I noticed yesterday that after I delete or move a message in a folder the next message is highlighted but it's grey, as if the function has moved to a different section. It's far more efficient if I can move from one message to the next and delete/move messages without the function defaulting to a different area after I delete/move an email. Was there an update that changed something? Can I get this setting back if it was something that was changed?

Did you clear the cache as well as this can be caused by having content in the cache that has been expired?
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
Are you using a bookmark to open these pages or does this also happen if you open the main page of those sites?
You can also check the home page setting:
*Tools > Options > General > Startup: Home page
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data in case pages are opened automatically when Firefox is started.
Rename (or delete) the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).
You can check the target line in the Firefox desktop shortcut (right-click: Properties) to make sure that nothing is appended after the path to the Firefox program.

(How) Can I change vi execution priority at runtime

Hi all,
I am using Daemons (free running VI's) and I communicate to them through Queues.
They are part of my device driver architecture and use a producer architecture (For Acquisition) or a consumer Architecture (For Control)
I have a single Daemon VI to which I deploy a "Device Object" using a Polymorphic class implimentation.
This implimentation has one subtle shortfall,
I am not able to change the execution priority at launch
There is a property node that taunts that it is possible but the help (And run time Error message) says it not available at runtime.
Does anyone know of an alternative method?
Here are what I have thought of to-date:
1. Have 5 different daemons each with a different priority [Distasteful for Code maintainance]
2. Make Priority Low, and ensure that at least 1 VI in the driver has a high priority [Not sure if it works, obscure implimentation]
Kind Regards,
Tim L.
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT
Solved!
Go to Solution.

Ben,
I debated wheter or not to put more information in my post, I didn't want to bore my potential support Sensei's.
Here Goes:
As I hinted in my initial post, I am devoloping a set of drivers for my large application.
I am using a compact Field Point and am under some fairly aggressive rescource pressures.
Heavy RS422/485 Serial Comms @115200, Digital Acquisition and some heavy data processing.
My understanding of this type of system (Jump in if you have any improvement suggestions):
Priority #1 [High Priority](Producer) is to get data out of the Acquisition Buffers and in my case, perform Writes/Outputs/control activities as demanded.
So any "Hardware" Device Driver Daemons that I lanuch need to be run at high priority. The drivers should do as little as is necessary so as not to hog this thread. Event based architecure is preferred over polled.
These drivers tend to be launched as Daemons so that they can run in a different priority and are not affected by other activities, they are inherently asynchronus.
Priority #2 [Above Normal Priority](Consumer->Producer) Protocol/state interpretation/Data Filtering.
Now that the data is out of the buffers, what does it mean? is it a valid communicationss message, was there a button pushed, is there an object in the transducer field.
These functions may take a bit longer (but not too much) to execute, but as they are on a lower priority, buffers can continue to be emptied.
These "filters" tend to be launched as Daemons also so that they can run in a different priority and are not affected by other activities they are inherently asynchronus.
Priority #3 [Normal Priority](Consumer) Number Crunching, Heavy Lifting , Control determination..
An event has occurred and some caculation interpretation and potentialy control needs to be performed, Do it.
Tend to be event based and as there are multiple stimulii tend to be best managed by an event structure. This allows for interaction with the front panel as well (should the need arise).
Priority #4 [Low Priority](Slip-Scheduled) User interface/User Data/Report Generation.
Who Cares if it is a bit late, Work away in background. In the case of user updates, they can slip later and later, no need to catch up.
For others reading this thread, I found This Module Help invaluable in understanding how Labview manages execution priority.
Theory Done, I am essentialy a lazy programmer, and don't like to write and maintain too many different .vi's if I can help it, <Rant> ESPECIALY IF THEY ARE THE SAME VI WITH A DIFFERENT PRIORITY! </rant>.
So I have written one Daemon and one Daemon manager (to rule them all). For each driver I require, I launch a Daemon, passing the "Base" Class object to the Daemon prior to Run, I rely on the override capability of polymorphism to choose the correct methods.
My "Base" Driver class contains all of the functions required for operation. I use it as an enforcable template for future driver development (It also auto fills in my Icon's wich is great for a Lazy Programmer like me).
I have established that my protocol driver (Priority #2) is compatable with the same daemon Architecture from above, Instead of looking at hardware, it monitors a Queue/Notifier/User Events from the lower level hardware driver.
I was very smug when I figured that one out, until.... I realised that they would need to be launched at different priorities to respect the RTOS, and thus my question.
I am not trying to change priority per-se, but to choose one prior to launch and then to leave it.
Cat Killed? (Curiosity Cured?)
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT

Delete some user's messages

Hi guys,
Our version of Sun Java Messaging Server is "Sun Java(tm) System Messaging Server 7.0-0.04 64bit (built Jun 20 2008)". Sometimes I have a need to delete some user's messages from the message store. Previously, I have done this with webmail, log in with web admin proxy user and delete some messages, but now in the new version this future doesn't exists.
Does it have some solution as with Sun Java Messaging Server 6?
Regards

Ops, I have configured proxy admin account, but nothing was happened when I try to log in with admin account. In the log I get only this
AM com.sun.uwc.common.auth.LDAPAuthFilter doFilter
INFO: --------Inside ldapfilter-----
My uwcauth.properties configuration is:
defaultdomain = mydomain.com
! Defines the default locale of the application
defaultlocale = en
! Defines the mode in which calendar server is operating.If the calendar server is operatin
g in hosted(virtual) domain mode, this parameter should have value of 'y' else it should ha
ve 'n'
virtualdomain.mode = n
!#### Defines if SSL is enabled #####
uwcauth.ssl.enabled=true
!#### Defines if SSL is enabled for authentication only#####
uwcauth.ssl.authonly=false
!###### Defines list of Admins for Proxy Authenication########
[email protected]
!######## LDAPAuth Filter Configuration ########
! LDAP server to authenticate against
! Usually the ldapauth.ldaphost is the same as the ldapusersession.ldaphost
! but it doesnt have to.
!ldapauth.ldaphost= <LDAPhostName>
!ldapauth.ldapport = <LDAPhostportnumber>
!ldapauth.dcroot = dc=mydomian,dc=com
!ldapauth.basedn= dc=mydomian,dc=com
!ldapauth.domainattr = inetDomainBaseDN,inetDomainStatus,inetDomainSearchFilter,domainUidSe
parator,preferredLanguage,aliasedObjectName
!ldapauth.domainfilter = (|(objectclass=inetDomain)(objectclass=inetDomainAlias))
!ldapauth.ldapbinddn = <binddn>
!ldapauth.ldapbindcred = <binddncredintials>
! ldapauth.enablessl parameter is reserved for future use. Connecting to
! Authentication LDAP directory over SSL is not yet supported.
!ldapauth.enablessl = false
!ldapauth.primaryDomain = sunPreferredDomain
!ldapauth.associatedDomain = associatedDomain
ldapauth.schema=2
!Parameters for the user lookup
!Syntax for the filter: %U is replaced by the uid part of the login (uid@domain)
! %V is replaced by the domain (uid@domain)
ldapusersession.defaultugfilter = uid=%U
!ldapusersession.ugattr = uid,inetUserStatus,preferredLanguage,psRoot,pabURI,cn,mail,mailHo
st
!Host name of the directory server used for users lookup. More than one host can be specfie
d for fallback.
!The names of the servers are delimited by comma.
!The name of fallback servers should be in the format : Host Name:Port#
ldapusersession.ldaphost = host.mydomain.com
ldapusersession.ldapport = 1389
ldapusersession.ldapbinddn = cn=Directory Manager
ldapusersession.ldapbindcred = p/RsDM36193WnsVc8aj5ZQ==
ldapusersession.dcroot = dc=mydomain,dc=com
ldapusersession.basedn = dc=mydomain,dc=com
ldapusersession.domainfilter = (objectClass=sunManagedOrganization)
ldapusersession.primaryDomain = sunPreferredDomain
ldapusersession.associatedDomain = associatedDomain
! Minimum Number of Connections in LDAP Pool
ldapusersession.ldappoolmin =30
! Maximum Number of Connections in LDAP Pool
ldapusersession.ldappoolmax = 100
! Timeout for LDAP request (in seconds)
ldapusersession.ldappooltimeout =30
! ldapusersession.enablessl parameter is reserved for future use. Connecting to
! User/group LDAP directory over SSL is not yet supported.
ldapusersession.enablessl = false
!######## Common Auth Configuration ######################
! Contains the name of the cookie used by the servlet container to
! keep track of sessions. Should never change!!!
uwcauth.sessioncookie = JSESSIONID
!Identity SSO
!'true' if Communications Express is enabled with Identity SSO, else 'false'
uwcauth.identity.enabled=false
! Login Page URL of the Indentity Server
uwcauth.identity.login.url=<IdentityLoginUrl>
! Login Page URL of the Identity Server in SSL mode
uwcauth.identity.ssl.login.url=<IdentitySSLLoginUrl>
!Bind DN of AdmAdmin
uwcauth.identity.binddn=<IdentityAdminDN>
!Bind Credentials of AmAdmin
uwcauth.identity.bindcred=<IdentityAdminPassword>
! Name of the Cookie set by Identity Server
! Note: This should be the same as the one configured in Identity Server
uwcauth.identity.cookiename=iPlanetDirectoryPro
!HTTP Port number of Communications Express
uwcauth.http.port=80
!HTTPS Port number of Communications Express
uwcauth.https.port=443
! Identity SSO Cookie Path
uwcauth.identitysso.cookiepath = /
! if this flag is true then the logout will cleans the IS Session completely so, all the ap
plications participated
! in this IS session will be signed out. If this flag is false then only the uwc's session
will be cleaned and user
! will be taken to the url configured below(identitysso.portalurl)
identitysso.singlesignoff = true
! if IS is enabled and singlesignoff is false then UWC leads to following URL
identitysso.portalurl = http://www.sun.com
! IF identitySSO is enabled then this flag will decide if UWC has to refresh its session wi
th Identity or not.
uwcauth.identity.refreshidentitysession=false
! If uwcauth.identity.refreshIdentitySession is set to true,then this will variable will de
cide at what percentage of
!interval will UWC refresh its Session with IdentityServer.Valid values for this variable r
ange from 1-9.As a example if the
!value of this variable is 8,then UWC will refresh its session with AccessManager after 80%
of UWC session time has completed
! If UWC Session never expires then AccessManager MaxIdleTime will used to calculate the re
fersh time.
uwcauth.identity.sessionrefreshinterval=8
! To support user to login thru the domain specific url (http://virtualdomain.com/uwc) with
out providing
! @virtualdomain.com as part of UID, the domain part of IS login url and domain specific ur
l of UWC should be same.
! To achieve this uwc needs to construct the IS login url in the runtime based on the domai
n specific url otherwise the
! browser will not provide IS cookie to UWC.
! Now, to help UWC to construct the IS login url according to the domain specific url of uw
c, we need to define the
! mapping as follows:
!'true' if pab migration is required else 'false'
!turn on this if pab migration is required
pab_mig_required = false
Our version of UWC is Patch: 122794-21 Packages: SUNWuwc.
What I have misconfigured?
Regards,
Cobe

Cannot change or delete a Visit List with old execution date

Hi all.
I'm creating a FM that updates Visit List.
Its works ok while the "execution date" field in the VL its bigger than today's date.
I cannot even change or delete it through /DSD/VC_VL.
When I try to delete or change the VL I got this message Visit list 9XXXXXXXXX cannot be changed (execution date is before today's date).
And when I try to change the header, all the fields are grey.
Any ideas?
Thanks.

Hello ,
Can you please clarify for what product your question is in relation to. From reading your post it is not clear.
Regards,
Patrick Dinneen
Support Engineer, SAP CS Support Delivery

[svn] 3539: Updated RadioButtonGroup to account for recent changes to LayoutManager priority queue .

Revision: 3539
Author: [email protected]
Date: 2008-10-09 10:58:31 -0700 (Thu, 09 Oct 2008)
Log Message:
Updated RadioButtonGroup to account for recent changes to LayoutManager priority queue. The order that a RadioButtonGroup was traversed was always dependent on what order that the radio buttons properties were validated. Since this assumption no longer holds true, we are now very specific about how the group orders the RadioButtons (breadth-first for consistency with Flex 2 and Flex 3).
Check-in Tests: Pass
Mustella Tests: (RadioButton, RadioButtonGroup) Pass
Reviewer: Glenn
QA: Yes
Bugs: SDK-17248
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17248
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/RadioButtonGroup.as

Revision: 3539
Author: [email protected]
Date: 2008-10-09 10:58:31 -0700 (Thu, 09 Oct 2008)
Log Message:
Updated RadioButtonGroup to account for recent changes to LayoutManager priority queue. The order that a RadioButtonGroup was traversed was always dependent on what order that the radio buttons properties were validated. Since this assumption no longer holds true, we are now very specific about how the group orders the RadioButtons (breadth-first for consistency with Flex 2 and Flex 3).
Check-in Tests: Pass
Mustella Tests: (RadioButton, RadioButtonGroup) Pass
Reviewer: Glenn
QA: Yes
Bugs: SDK-17248
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17248
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/RadioButtonGroup.as

Changing or deleting online number

I have a Manchester, UK online number as part of my Skype subscription. I need to change this to a Bristol, UK number (my relatives have moved home), but after searching the "Online " pages I can't find any option to replace the number with a new one, only options to buy an extra one. I tried buying a second one (extra expense) in the hope that a "change online number" option might appear but no - I now have two online numbers, one of which is of no use to me.
How do I delete the old Manchester one and transfer the new Bristol one to my subscription? In the older versions of Skype software it was easily possible to delete or change online numbers, why is it so difficult now?
Thanks for your suggestions.
(Skype id: lementle)

geum wrote:
I have a Manchester, UK online number as part of my Skype subscription. I need to change this to a Bristol, UK number (my relatives have moved home), but after searching the "Online " pages I can't find any option to replace the number with a new one, only options to buy an extra one. I tried buying a second one (extra expense) in the hope that a "change online number" option might appear but no - I now have two online numbers, one of which is of no use to me.
How do I delete the old Manchester one and transfer the new Bristol one to my subscription? In the older versions of Skype software it was easily possible to delete or change online numbers, why is it so difficult now?
You would have to purchase a new Online Number in Bristol, and just let the Manchester number expire without renewing it. Online Numbers won't renew automatically, as subscriptions do, so there is no harm in just ignoring it. There is no option to change an online number. If you just extended your Manchester number, you may want to contact Skype Support to see if there is anything that can be done to cancel that number and possibly refund the purchase price. If you've had the number a while, there is probably nothing that can be done there.
I've had Online Numbers for over 4 years on my Skype account. I've never seen any options to change or delete them. On the Skype web site, I can log into my account and extend the numbers beyond their current expiration dates, but there is no way to change or delete them. Online Numbers are separate from your calling subscription, except that you get a discount when purchasing Online Numbers when you already have a subscription.
Good luck!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Changing or deleting priority of a message

Similar Messages

Maybe you are looking for