Changing or setting what ports to use (port-mapping)

Hi
I use LittleSnitch and can set which port to use, so I was wondering, how many are there, also would it be OK to set all programs to ANY port, or do certain programs need certain ports?

Perhaps this might be of help:
http://support.apple.com/kb/TS1629?viewlocale=en_US

Similar Messages

  • How to set up port mapping in airport extreme?

    I just buy a Ip cam (d link) which need to set up port forwarding for outside access.
    What can I do?  My ISP is netvigator.
    How to set up and input which address to the airport utility?
    Please help.
    Thanks!

    Mmm, generally you don't need to do much port mapping in an extreme. Not sure I understand you.  What does the d-link do?

  • How do I change SSID setting? Getting message "using network with default ssid'

    Getting message "using network with default ssid'

    First, let's address the biggest issue, the version of Firefox you are using is extremely old, out of date and insecure. Please update to Firefox 33 ASAP ([[Update Firefox to the latest version]])
    After that, please give a bit more context on what exactly is going on. Keep in mind this is a Firefox support forum, we can't help you with Windows settings or setting up wireless networks.

  • Changing Level-setting of 600 images using InDesign

    Hi guys,
    I have a catalog containing almost 600 photos, but they has to be refined {just basic tonal range adjustment}. My question is symple: Do I have to use Photoshop's batch processor to edit every file or is some tool uncluded in ID - something like: Select all images > adjust levels? I am affraid, there is no other way but the Ps, but I am asking anyway...
    Thank you

    Thank you mate...
    Grat thanks for your help.

  • How do I use Port Mapping?

    b How do I use Port Mapping?
    (This document will assume that you are using and ABS/AEBS/AX as an internet router and have DHCP & NAT turned on.)
    Sometime you may want to offer access to a computer on your AirPort network to users on the internet, whether it be a web site, or for file sharing, or just remote access for yourself when traveling. If any of these sound like something you want to do, then you need to understand how Port Mapping works.
    b AirPort as Firewall
    Most of the time your AirPort base station will not let any traffic into your network which did not originate from your network. It will let everything out and replies to your traffic back in, but it will not let sessions initiated on the internet side of the base station in to your network. This is what is referred to as the "NAT firewall" capability of the base station and it provides effective protection for your network from the internet. What Port Mapping does is poke a hole in this wall to allow certain type(s) of traffic into the network and direct this traffic to a specific computer on the network. In the firewall world this is commonly referred to as an "inbound proxy" or "inbound translation" rule or "PAT" (Port Address Translation) in the router world.
    b The Need for Manual Addressing
    Since a Port Mapping entry in the base station configuration requires an inside private IP address to be specified, the computer to which to mapping entry applies should always have the IP address specified in the mapping entry. Thus, DHCP should not be used for a computer offering services on the internet as the Port Mapping entry will no longer work if the target computer's IP address changes. In general, an Apple base station's DHCP server will try to assign IP addresses in the 10.0.1.2 to 10.0.1.200 range. IP addresses above 10.0.1.200 can be Manually assigned to computers and other devices on the network up to 10.0.1.254. 10.0.1.255 is reserved (it is the broadcast address for the 10.0.1 subnet). To Manually set up the TCP/IP information for a Macintosh running Mac OS X, go to System Preferences -> Network and "Show" the appropriate interface (Ethernet or AirPort) and click on the TCP/IP tab. Select "Configure Manually" and enter the following information:
    IP address : 10.0.1.201 (or whatever address you decide to use)
    Subnet mask : 255.255.255.0
    Router IP : 10.0.1.1 (the AirPort base station LAN IP)
    DNS server : 10.0.1.1, or whatever DNS server IP your ISP uses
    After making these changes verify that your computer can still access the internet and local resources on the LAN before continuing.
    b Port Mapping a service
    In our example we will be hosting a web site on a computer which we have given an IP address of 10.0.1.201. Basic web sites are accessed using the HyperText Transport Protocol (HTTP) and this protocol typically uses port 80 to communicate. In order for others to see the web site, we must configure a Port Mapping entry in the base station configuration to not only allow the web browsers in, but to tell the base station what IP address the web server is using. The Port Mapping entry has three parts: Public Port, Private IP, and Private Port. In this case you would use the following values:
    Public Port : 80
    Private IP : 10.0.1.201 (this is the computer hosting the web site)
    Private Port : 80
    In order to access the web site from the internet, users must reference the base station's WAN port public IP (determined by looking at the base station configuration summary page in the AirPort Admin Utility). Since this address may change over time, you might want to use a Dynamic DNS service to simplify connecting for your users.
    Sometimes the port you wish to use may be blocked by the ISP. In this case, use a different non-standard Public Port number for the service, but keep the Private Port standard. In the above example, if the ISP was blocking port 80, you could potentially use 8080 instead, so:
    Public Port :

    Public Port : 8080
    Private IP : 10.0.1.201
    Private Port : 80
    Your users would then have to enter "http://<publicIP>:8080/" (where <publicIP> is the public IP address of the AirPort base station) to access the web site.
    b Internal Access
    It should be noted that when accessing these services from within the network you cannot reference the Public IP/Public Port, but rather you must use the Private IP/Private Port. Thus, "http://10.0.1.201:80/" in the above example.
    b Limits and Options
    There is a maximum of 20 Port Mapping entries that can be made in an Apple base station configuration. If you use an AirPort Extreme or AirPort Express base station there is an option which can be helpful in the case where you need many ports opened to a single computer. This is the "Default Host" option. When using this it is not necessary to use Port Mapping at all as all ports will be opened to the specified "Default Host". This is found in "Base Station Options". The default IP address for the "Default Host" is 10.0.1.253. You may change this IP address. The target computer must be Manually configured as specified above with the same IP address. Since all ports are now open to this computer, you should enable and configure the Mac OS X firewall on the default host computer to protect it from intruders.
    b Useful Related Links
    <a href="http://docs.info.apple.com/article.html?artnum=52002>"Designing AirPort Extreme Networks: Manuals</a>
    "Well Known" TCP and UDP Ports Used By Apple Software Products
    IANA Port Number Assignments

  • Port mapping

    I am having trouble setting up port mapping on my computer. the application I need to use with port mapping is telling my that the port is closed. I can't find it anywhere how to open up a port. can anyone help me out with this

    Hello triumph1981. Welcome to the Apple Discussions!
    I am having trouble setting up port mapping on my computer. the application I need to use with port mapping is telling my that the port is closed. I can't find it anywhere how to open up a port. can anyone help me out with this
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): <enter the appropriate UDP port values>
    o Public TCP Port(s): <enter the appropriate TCP port values>
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
    o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • Cisco ASA 5505 - Port Mapping

    Hi, I'm new into IT and I was wondering if somebody could help me set up Port Mapping. Here's my scenario - 
    We have set up an Asterisk VoIP server that uses UDP port 5060 and another port range, and we want any public incoming connections destined for our Asterisk server on Port 5099 to be translated at the firewall to go to our Asterisk server on port 5060. I have been using ASDM 6.4 but theres no easy way to do this (as far as I know, and why I've came here looking for an answer).
    We have currently just left port 5060 open to the public (so our home workers can use our phone system) but really want to get this sorted ASAP due to SIP Bots that look for ports like 5060 that are open!!
    Any help would be greatly appreciated and if anybody needs anymore information just ask!!

    Hi,
    You need to have a NAT rule set for port-forwarding to make as per your requirement..... I will give you cli based configuration example....
    If your ASA is running with pre-8.3 version:
    static (inside,outside) tcp interface 5099 192.168.1.10 5060 netmask 255.255.255.255
    If your ASA is running with post-8.3 version:
    object network SERVER-01
    host 192.168.1.10
    object network SERVER-01
    nat (Inside,Outside) static interface service tcp 5099 5060
    Regards
    Karthik

  • Airport Extreme v7.3.3 Port Mapping Port 80

    I have a DVR in my home which is connected to my home network. It has a static IP address. I would like to be able to utilize its mobile app from any mobile/cellular network. The manufacturer of my DVR tells me that I need to open up Port 80 on my router, which is an Airport Extreme running v7.3.3.
    I have tried looking up solutions and have found similar results but nothing for the AirPort running v7.x.x. Everything I have found is for version v6.x.x or v5.x.x.
    I have tried using the following examples with no success, which may be fault on my part, as well as the document:
    AirPort - Port Mapping Basics using AirPort Utility v6.x
    http://portforward.com/english/routers/port_forwarding/Apple/AirPortExtreme/defa ultguide.htm
    Re: How do I open ports on my airport extreme and assign a fixed IP Address for a device connected to my network?
    Any further advice would be welcome. Thank you. I will gladly provide further details upon request/as needed.

    I have tried looking up solutions and have found similar results but nothing for the AirPort running v7.x.x. Everything I have found is for version v6.x.x or v5.x.x.
    Unfortunately, you have the firmware version of the AirPort mixed up with the software version of AirPort Utility, the application used to setup and administer the AirPort router.
    Your AirPort was setup using software either by AirPort Utility 6.x...or....an iPad or iPhone running the iOS version of AirPort Utility. Either of those applications will allow you to set up port mapping......IF.....the AirPort is setup as the main router on your network. 
    Or, in other words....you do not have the AirPort connected to another modem/router on the network.
    Now might be a very good time to confirm on the make and model number of the device that you call your "modem", since that will dictate the next move as far as setting up ports.

  • Default Host (DMZ) and Port Mapping together

    Hi all,
    I have the G5 set as a default host for all my web services through the Airport Extreme.
    In the Airport Extreme's Port Mapping tab, a user is not prevented from using the port mapping tab even when the Default host is set. I want to serve video through another port not on the G5.
    Does this mean I can set up port mapping for ports I do not want to go to the default host? (my G5 in this case)
    I asked this on the airport forum and never got an answer, maybe you G5 folks might know. (Or maybe there is a setting that will redirect from the G5.)
    Thanks in advance,
    Jamy

    I figured it out. I can't have a DMZ and separately port mapping on the Airport.

  • Where do I find the port mapping option in the new Airport Utility?

    I'm using the new Airport Utility w/ my AEBS. I'm running it in 802.11n '11a compatablity mode" w/ my Macbook (no 11n).
    I can't seem to see the tab to set my port mapping. Where is it?
    I don't see it in the Airport or Advanced settings in the Utility.

    Are you in bridge mode? Under Internet > Connection Sharing, is the choice set to Off (Bridge Mode)?
    Or... have you discovered that you can double-click on a base station or choose Manual Setup from the Base Station menu?

  • Setup Airport Extreme Port Mapping for Swann DVR16-2600

    Have a Swann video surv system and want to use iPhone 4 and Web to view camera displays remotely.  It requires setting up port mapping for the DVR so it can serve ports 80 and 9000 to the remote display app and web screens.
    Have signed up for a static public ip address from ISP since they do not allow port mapping using DHCP.  Trying to setup so I can use the SwannView application on iPhone 4 and use Webview in browser to access/see security camera displays on/through the DVR.  Not working correctly - only partial success.
    Reconfigured Airport Extreme for the new ip address and tried to setup port mapping for dvr which needs a web port 84 and another port 9000.  Can connect to DVR on internal network using the public static ip:84 and the internal static ip:84 but it only shows a SWANN splash page and an error about not able to load ipaddress:84/65536. Seems like something is preventing the Web display from completely launching - should see a login page but not getting it.
    Airport is set to use static ips in the 10.0.1.2 to 10.0.1.10 range with the DVR assigned 10.0.1.5.  Tried to set the port mapping for 84 and 9000 but not sure those are working correctly.  Swann support tried accessing the DVR over the public ip address and they cannot get through.  So suspect problem is with configuring the Airport Port Mapping settings and services, etc. on the Airport Extreme.  I can get to the DVR internally using the public ip address:84 and the internal static ip address of the DVR:84 but support cannot get to it from external web.
    Tried both Safari and IE 5 and both show same problem trying to launch the Swann login page, etc.  iPhone Swannview app doesn't work either.
    Any ideas about proper port mapping settings for those ports in the Airport Extreme?   Is this correct setting for the Service Type:   _http._tcp   and do you need to add settings for the public and private udp ports.  The udp port fields are empty.  Only have entries in the Private IP Address and Public and Private TCP port fields.
    Is there a way in Safari or IE5 to set security to see the public ip address as a friendly site and not block anything from loading?

    Set port mapping for 85 (not 84) and 9000
    Also, if you haven't, be sure to go into the Swann DVR setup and disable the "enable UPnP" option.    The UPnP protocol will not work with Port mapping feature of the Apple Airport Extreme.

  • How do I find out what program is using what port?

    Hi
    I would like to know what program is using what port? I would also like to know how to close a port. I did a port scan and these ports were open:
    Open TCP Port: 1033 netinfo-local
    Open TCP Port: 20221
    Open TCP Port: 20222 ipulse-ics
    Open TCP Port: 20223
    Open TCP Port: 20224
    Open TCP Port: 20225
    Open TCP Port: 20226
    Open TCP Port: 20227
    Open TCP Port: 20228
    Open TCP Port: 47807
    I am using netbarrier on my computer.
    Thank you for your help.
    iBook G4   Mac OS X (10.4.8)  

    This document may help with your first question:
    "Well known" TCP and UDP ports used by Apple Software Products
    This IANA listing of the port numbers is also useful, if more detailed.
    You can use the Sharing tab of System Preferences to configure the firewall to block all ports except for those specified; you can use the command-line ipfw utility to set up more detailed firewall configurations.
    Matt

  • HT204406 What ports are used by iTunes Match?

    What ports are used by itunes Match? I need to change my router settings.

    Good question. The standard document is still mentioning MobileMe, rather than iCloud.
    TCP 5223 looks significant ... but the a close check through the rest of the following document might also be prudent:
    Well known TCP and UDP ports used by Apple software products

  • What ports are used for handshaking signals?

    I want to use Handshaking Digital I/O on an AT-MIO-16DE-10, and I want to know if there are extra digital I/O lines used for this, or if there are independant handshaking connections. I can't seem to find any documentation which warns that you can only get 7 bits out of a port if you use handshaking. Or you can only use ports 2,3,4 because port 0 is used for the handshaking signals.
    Any hints would be appreciated.

    Great, actually, I found this information, and would like to re state my question. Now that I know what ports I should be using (this is described in detail in the hardware manual for the E series), I would like to see some definite information about what I must do in my external device to make use of these signals.
    I'm a little confused by some comments in the documentation that some of the facilities of Port C (on the 8255) are only avialable if I use register level commands (as if using the parallel port). If I use the DIG_Prt_Config and set to handshaking (input) on a port, then I assume I set up my external hardware as if Port C was in Mode 1(input), and then follow the timing described in the E Series manual.
    It's just a shame that everything o
    n the PC side is well described, but there are no application notes that I can find about building an external device that can use the handshaking signals.
    If 'you' (anyone) can confirm what my assumptions, or point me in the right direction, I would appreciate it greatly.
    Thank you.
    Joshua

  • What ports do LWAPP AP's use to talk to the controllers.

    Upon boot what ports and protocols are used for the
    LWAPP AP to find the Controller.
    What we are trying to do is, If we have an AP on a
    vendor site in which we have a Site to Site VPN connection.
    Can we get the AP connected and have a device on the vendors site connect to our network?
    Thanks for the Help.
    Pete

    If you are running version 5.1 or earlier the packets are encapsulated in LWAPP so the ports are UDP 12222 or 12223.
    If you are running version 5.2 or later the protocol changed to CAPWAP which uses UDP ports. 5246 and 5247.
    For mobility the controllers use UDP 16666 to talk to eachother and IP Protocol 97 to tunnel the client's traffic if tunneling is needed.

Maybe you are looking for