Changing the ECC Client in DEV affects Transformation?

Hi,
I have a Clarification here.
We have 2 clients for ECC Dev, 300 & 100. We completed all our developments in BID linking to 300 client. Now, Customer says that he has more data in 100 client, so he wants to do testing of that data.
We have activated all the MD & TD Datasources in 300 Client and all the Transformation mappings are also pointing to 300.
How can this be achieved? Now, if suppose, Basis changes the Logical system to 100, do i have to do all the Activations in ECC again for 100? Do I have to create Transformations for all the Targets again?
Thanks for your time.
Regards,
Murali

Hi Murali,
Transformations are not source system dependent, when you say that you can see the name of source system in your transformation, where actually you can see that name? In the description or do you have source system as field in the header informaiton of Transformation?
You can get the difference, when you double click on your Data source you will see the Source system as separate field in the header information, but in case of transformation you will have only source or transformation and Target as important fields along with other fields.
Or are you saying that in the transformation mapping of fields you have source system ID assigned to target field source system ID?
And during transport source system changes are taken care by using transport connection, go to your RSA1 transaciton in the target system and go to Transport Connection-----> "Conversion" button on the tool bar here you can do the mapping of your source client and target client.
Regards,
Durgesh.

Similar Messages

Changing the source client of a transport request

Hi!
I transported few requests from client 300 to client 200 using transaction scc1.
Now, i want to transport them to another client from 200. But when i try to release those requests the systems prompts "Request <#> (300) belongs to a different client".
I tried changing the source by double clicking the request, but I'm unable to do so.
Can u please suggest any way of changing the source client of these requests ?
Thanks!!
Regards,
Muzammil.

Hi,
Goto SE01,
The type transport number
Display
Place cursor on the TR
Click Utilities=>Reorganize=>Change Project.
Best regards,
Prashant

How to change the ECC Source system in SAP BI

Dear Experts,
In my BI development system instead of showing ECC development system as a source system it is showing ECC production system.
Now in my BI system I want to change the source system from ECC Production to ECC development.
Kindly explain me step by step to change the source system from ECC Production to ECC development.
Regards,
Suresh.

Hi,
Ask your basis team to change source system entries.
They knows how to assign logical mappings.
Tx - BDLS.
Tables - RSLOGSYSMAP.
Try this way.
Bw, Tx - RSA1-->source system, Menu Tools - Conversion of logical system name and Assignment of source system to source system ID.
Thanks

How to change the email client for the 'Review' features. Acrobat Pro X

Acrobat Pro X (10.1.2) was installed on a system that used Lotus Notes (v8.5) email client, all was well. The system was then upgraded to MS Outlook 2010, so Outlook is now the email client on system. While reading a PDF document an email address can be double clicked and a new Outlook message is started. Problem is on the Comment toolbar the features under Review will still prompt for a Lotus Notes password. Seems Acrobat is still wanting to email ‘reviews’ using Notes. Finding no Option to change here and GOOGLing at this to no avail am posting here.
A registry tweak or some INI file to change here? Any help please. My fallback plan is to remove and re-install Acrobat Pro.

Try making sure your default email program is set under Edit > Preferences > Internet category > Internet Settings ...Programs tab in Acrobat.
You can also try doing a Help > Repair Acrobat installation since you installed Outlook after installing Acrobat.

How register the ECC Client to SLD automatically

Hi All,
I know the we could use RZ70 to register the ABAP system to SLD
but it seems RZ70 only could register it as the technical system in SLD
but i am wondering is it possible to register the client as the business system in SLD?
let's say: ECC host is erp, and the client is 100, how to register ERPCLNT100 into SLD automatically???
thanks a lot

Hi,
From PI7.0 onwards ECC client registered automatically in SLD.
Check more on PI installation guidelines.
Re: Installing PI 7.0
Thanks.
Boopathi
Edited by: Boopathi Thangavel on Jun 30, 2008 8:55 AM

PI7.1 change the default client 001

HI.
I want to change the client from 001 to 100 in PI7.1.
The configuration wizard configure JAVA, to connect client 001.
What is the advantage and dis-advantage to change the client.
regards,

Hi,
If you will go to SLD. There you can be able to understand the concept of it.
The heirarchy is :
Technical Sytem can have different Client numbers
Each Client Number is related to one bussiness system.
And only for SAP system client numbers are required.
You will be provided with a specific client to logon to. A client is a separete data environment within SAP. You must use the client number provided for you or your attempts to login to the system will fail.
May be this will be helpful to understand the use of client number in R/3 system to connect to XI/PI
Regards,
Nutan

Changing the ECC talking to the PI system

Hi
We have done our testing on a PI QA system which was talking to a SAP system EXD ......now the users want to do the testing on the same PI QA system with another SAP system EXR.....what should we do ???
Option 1 - create new transport target and then transport the new ID objects ...in this case I will ahve 2 ID objects for each...one for EXD and one for EXR ....also i will have to manually fill the comm channel details which is a big task again
Option 2 - do not make any change to the current ID and just change the technical system pointing to the business system EXDCLNT200.....let it point to technical system EXR and client 300 .....
which of the above 2 options do u suggest?
Hema

hema T wrote:
Hi
>
> We have done our testing on a PI QA system which was talking to a SAP system EXD ......now the users want to do the testing on the same PI QA system with another SAP system EXR.....what should we do ???
easiest option will be to get the sap system into SLD.
then go and change the TS reference of the BS of the earlier SAP system to use the TS of the new SAP system.
thus you will need not do anything in ID. once you have your destinations etc reconfigured, testing can proceed.
the above solution is with the assumption that you dont need to test two sap systems in parallel

Changing the roosfield table values , will affect in upgradation??

Hi all,
I am working on bw with crm.I need to modify the 0sales_act_1 extractor . i found that one field is available in extract structure but it is not available in extractor(data source) e.g.. like created by and changed by fields. I need to populate values for the fields. so i checked and found one way that i modified the roosfield table. (by changing the selection field value from A TO NULL. Now the extractor is working fine. I did it using the following code.
REPORT ZSALES_ACT_1 .
Tables : ROOSFIELD.
****to change the "changed by" visibility
select single * from roosfield where
 OLTPSOURCE = '0CRM_SALES_ACT_1' and
 OBJVERS = 'A' and
 FIELD = 'CHANGED_BY'.
roosfield-selection = ' '.
modify roosfield.
>> What my question is , is it recommended way to modify data source by SAP. or
Is there any other way to modify the data source. I need to bring those two fields in extractor .
(if u can't understand this, let me know, i will send u the screen shot.
>> what will be the effect of this on upgradation and transportation??
Thanks in Advance
Arun Thangaraj


Hi dear,
about what you are referring to, I think I have some responsibility (since I think I was the first to post such a code in SDN in order to modify extraction settings)...
Anyway, SAP suggested a similar method only for peculiar cases (and for specific datasource/field) in some OSS Notes, but it is an unorthodox way..the problem is that there is no other way to follow, so...
Don't worry about upgrade (even if a little test is always recommendable...)
Bye,
Roberto

Changing the Receiver BI Client No.

Has any one tried changing the BI Client No in the Receiver when using the "initial reduction scenario".
My scenario is this
Sender BI Client 200
Receiver BI Client needs to be 300 .
I have done it with ECC and CRM but never tried for BI.
Let me know if there are any issues with this sort of setup.
Regards
AnoopKrishnan
Edited by: Anoop Raveendran on Jul 30, 2010 12:55 AM

Thanks Guys,
Here is what i did
1) Changed the client in BI through the options in the TDMS initial reduction scenario.
2) After the above mentioned client copy was complete I changed the BWMANDT column in table RSADMINA to point to the new I client created
3) Ran BDLS in the all the BI source systems (to change the BI logical client entry) which were to be connected to the New BI system
4) Ran BDLS in the BI system
a) change the logical system name for the BI system
b) change the logical system name for all the source systems connected to BI (In my case the source systems were also different than what existed in the sender BI system)
5) You might have to restore the BI system as well through RSA1. This is because when we chang the target client all the partner profiles(available in WE20 transaction) and Port Definitions (WE21) were missing in the New BI system.
6) Then Restored the all the source sytem connections through transaction RSA1.
Along with this i did the regular Post-Installation Steps of System Copy and Client Copy.

How to change the client

Dear Friends ,
we have a portal and the users are maintained in R/3 that means UME is R/3 .
Now when i have to give the access to the users to use ESS applications they are not bale to view ESS role since the portal is mapper to client where the user is not existing.
Say for Eg : i have checked in system administration-> UME configuration-> where i found client :100
but the users are existing in 200 .
Now my query is in order to access the ESS applications the users which are created in CLIENT 200 has to be configured instead of client 100 .
What are all the places i have to change inorder to map the system to client to 200.
Is that correct that i have changed in system administration->UME configuration->ABAP system tab
Thanks in advance

Dear krishna,
Hope you are doing good.
Inorder to change the UME client:
Login to the configtool->switch to the configuration editor mode->configuration->cluster_data->server-> cfg> services->
Propertysheet com.sap.security.core.ume.service Check the below values:
->ume.persistence.data_source_configuration= dataSourceConfiguration_abap.xml
->ume.r3.connection.master.client :
->ume.r3.connection.master.r3name :
->ume.r3.connection.master.user :SAPJSF (SAP_BC_JSF_COMMUNICATION should
be assigned in the backend)
->ume.r3.connection.master.passwd: <passwd of the sapjsf user>
Make sure that the J2EE_guest user is present only in the ABAP server (not in the local DB) and has the role SAP_J2EE_GUEST assigned to it. After that restart the J2EE engine. For more info:
[http://help.sap.com/saphelp_nw04/helpdata/en/84/10594aecd3e1408845e66c432b955e/frameset.htm]
Also, make sure that you make the changes in the JCo, else the issue as per the below may occur:
1592158 - Jco Connection fails with RFC metadata retrieved from another server error
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

Want to change the client in UME j2ee engine

Hi Experts,
In new installation of SAP pi 7.4. We have changed client at all places now we want to change the UME client.
For changing clients i refered notes:
940309 - Change PI default client after NW 7.0 Installation
Change UME master: To do this start either the 'offlinecfgeditor' shell script or logon to
the Visual Administrator with the j2ee_admin user and browse to the 'Configuration Adapter'
service. Navigate to 'cluster_data -> server -> cfg -> services' and edit Propertysheet
"com.sap.security.core.ume.service". Change Property "ume.r3.connection.master.client" to the
new client. Save and restart the J2EE Engine.
But seems NWA replaced Visual adminstrator for this activity .Could anyone please tell me where to change client in NWA for UME(user management engine)
Basically my abap stack is pointing set to client 100 and java to client 001 default for password authentication.

Hi Dilip,
Login to the Configtool-> switch to the configuration editor mode (click on edit mode) ->configuration ->cluster_data->server-> cfg> services-> Propertysheet com.sap.security.core.ume.service.
See this link is usefully
https://help.sap.com/saphelp_nw70ehp2/helpdata/en/0b/50ad3e1d1edc61e10000000a114084/frameset.htm
Regards,
Deva

Change the pwd of the WBEM client:SLDAccess set to true but not available

Hello,
I checked on ABAP side with transaction SLDCHECK, everything fine.
Then checked http://server:port/sld/ListServlet?bsview=true
*Please find the log content below:*
WARNING com.sap.lcr.cimsrv.ChangePasswordServlet: Password Change that service client users don't have initial passwords.Alternatively, logon to the SLD user interface with the corresponding user and assign a new password client settings must be updated accordingly.
So suggestion was to change the WBEM client password.
Due to the above scenario, *Error in SXMBMONI*_ is:
com.sap.aii.af.ra.ms.api.ConfigException: SLDAccess set to true, but not available
Can anyone let me know how to resolve this issue.
Thanks in advance.
Ganesh Karicharla

HI ganesh
check this thread for reference
Unable to find an associated SLD element
regards
kummari

How do I change the default email client from Thunderbird to Gmail in FF 3.6.17?

Using Mac, OS 10.6.7 and Firefox 3.6.17
When I click on an email address link, Thunderbird launches, but I want always to use Gmail. How do I change the email client from Thunderbird to Gmail?

THANK YOU SO MUCH, Tony!
I knew it had to be pretty simple...I just couldn't find the exact location to make the change. Now done. What a relief!!!

Changing the defauly mail client

Hi,
When I open mail to change the default client, when I go to preferences the menu bar it is grayed out and unclickable.
And when I click cancel on the wizard Mail quits.
How do I the default Mail client if the menu item is unclickable?
Cheers!

You should set up a dummy email account using the setup wizard. Once it checks for email and fails, you should be able to change the preferences.
http://www.wikihow.com/Change-the-Default-Email-Client-on-Mac-OS-X

Best Way to Change Source System Client

We initially had a ECC source client for BI as 35. But over time, we suffered with good test data because the ECC team use client 15 and not 35. We want to change BI 7 to use client 15. I have created a new source system in RSA1 for Client 15 but when I try to delete client 35 and /or change the source client on a datasource, all the data mappings are deleted!
I would really appreciate any advice or information on the best way to change the source R3 client for Bi without losing data mappings. Point awarded and much respect
Warm regards
Lee Lewis

Hi,
Yes. There is a way to change the source system without deleting the old system. Please use the T.code BDLS and for more information refer the below link
Re: Changing a Source System.
OSS note 886102 will also give more information about this.
Hope it helps.
Thanks.

Changing the ECC Client in DEV affects Transformation?

Similar Messages

Maybe you are looking for