Changing the server name on package connection string.

I have a connection string in a package which is a local connection string and not in project connection manager and isn't parameterize as well. Now I need to change a server name of the connection property without using editor. Can I do that and how ?
Moyz Khan

I agree about using configuration for connection string but unfortunately this is an inherited project/packages . And my task it to make these run as currently I don't have luxury to modified it.
So I was able to change most of the connection string with below update
update[SSISDB].[internal].[execution_parameter_values]
setparameter_value=replace(cast(parameter_valueasvarchar),'OldServer',NEwServer)
update[SSISDB].[internal].[object_parameters]
set[design_default_value]=
replace(
cast([design_default_value]asvarchar(1000)),'OldServer','NEwServer')
Now the only one its complaining is the Project connection string . If I know where to look and update that I might be able to run these packages .
Moyz Khan

Similar Messages

"Is it possible to hide/remove/change the server name/type and

Is it possible to change the server name/type and version number being sent in the http response header by iPlanet Web server so a hacker can't see what server and version I'm running? If yes, what is the procedure to do it?

Hi,
I have tried the ServerString none entry in magnus.conf but still it is showing the Server information in the header if you use telnet . Is there any other way to hide or to mask this information.
Thanks,
Ramki

Server name problem-jdbc connection string

hi..
my server name is SERKANPROX\LOCALHOST .. i couldn't connect to this server with this server name . how can i write the server name in connection string?. this is the part my code:
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver").newInstance();
Connection con = DriverManager.getConnection("jdbc:microsoft:sqlserver://serkanprox//localhost:1 433;DatabaseName=NorthWind","serkan","serkan");
the exception is : [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
i can connect to the server which name is "serkan" . but when there is a '\' character ,i couldn't..
how can i can change the connection string for connecting to this server ..
thanksss

hi..
my server name is SERKANPROX\LOCALHOST No it isn't. Get the right server name. This problem has nothing to do with your username and password and such.

SSIS Expression to Server Name from a Connection String

Hi,
I have an SSIS variable which contains a connection string as follows; -
User::strDYNconnection {Data Source=myServer;Initial Catalog=myDatabase;Provider=SQLNCLI10.1;Integrated Security=XXXX} String
I need to get the server name from the above variable using an SSIS expression so I can pass the server name to another function.
Thanks in advance,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Hi Kieran,
This works fine when the Data source comes first in the connection string (which it usualy does). but when it doesn't,
e.g.
Initial Catalog=myDatabase;Data Source=myServer;Provider=SQLNCLI10.1;Integrated Security=XXXX}
you will get 'myDatabase' as an answer
I would add 'Data source =' in the find string (and adjust for length of this search string to add sufficient offset)
e.g.
SUBSTRING(RIGHT(@[User::strDYNconnection],LEN(@[User::strDYNconnection]) - 11 - FINDSTRING(@[User::strDYNconnection],"Data Source=",1)),1,FINDSTRING((RIGHT(@[User::strDYNconnection],LEN(@[User::strDYNconnection]) - 11 - FINDSTRING(@[User::strDYNconnection],"Data
Source=",1))),";",1) - 1)
Even this is not foolproof, when the Data source is the last element in the string and there is no ending ;
e.g.
Initial Catalog=myDatabase;Provider=SQLNCLI10.1;Integrated Security=XXXX;Data Source=myServer}
the formula needs to be extended further with a ( ? : ) operator around the last operator to see if the last ";" was found or not.
Jan D'Hondt - SQL server BI development

OEM is not getting started after changing the Server name

Hello DBAs
Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
In windows services one service named *"OracleDBConsoleDbname"* is not getting started, which could be the issue.
Can someone please guide me what can be done to fix this problem.
Thanks
-Naveen

Hi Naveen,
What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
What action needs to be taken if the hostname or SID of the database server is changed?
If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
Eric

How do I properly change the server name in mountain lion server?

I need to change my server name to a FQDN, but tried this with Lion server in the past without success. I know in lion you'd use server app, but that's no longer avaiable in mountain lion server and I want to make sure I get this right the first time.
Thanks!

I was able to get everything working with some assistance from Apple's enterprise support. After changing the host name, the DNS was still not resolving properly and I couldn't turn on open directory so that I'd be able to start profile manager. The DNS interface is considerably different than that in previous versions of server. The network was set to manual ip with dhcp, which was pulling back an external IP. Overriding the DNS info coming in via the dhcp, setting it to localhost, resolved the issue.
Thanks!

Can't run Connector, Changes the server name

I am trying to run the Windows 2011 Server Connector on a new PC running 8.1. Never worked with 8.1 before. Connecting on earlier OSs was easy. I am following the same procedure, but the system keeps placing " :65510 " behind the server name. Of
course the ":" is a non-standard character, and it gives me the error message.
Why does it add these characters, and how can I stop it in order to install the 2011 home server "connector?"

Hello Metalplane,
As this issue is related to Windows home server, to receive better support, it is recommended to post in the Windows Home server Forum.
The professionals there will be glad to help you.
https://social.microsoft.com/Forums/en-US/home?category=WindowsHomeServer
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Changing the server name

Hi,
We have our sandbox system in the solution manager and configurations done. Recently we have changed the hostname of the sandbox system viz., xy00yz01 to ab00bc0...now coming to the question...can I change the sandbox hostname in the solution manager so that the pre-existing configuration settings work? Does this work or Is there any alternative?
Thanks and Regards,
Damanaidu J

Hi,
My question was not to change the name of a host server as such...say i have a server with name xy00yz01 and i have changed it to ab00bc01...i have done configuration settings for my satelite system with name xy00yz01in solution manager...now those settings can't be detected by the solution manager as the host name of my satelite system is now ab00bc01...so my question is whether I can change the host name of the satellite system to ab00bc01 from the solution manager setup so that I can all the configuration settings detected.
Thanks and Regards,
Damanaidu J

Changing the server name and IP of an instance

I am moving QAS to another partition. I did a full system backup and restore to the new partition name and IP. QAS will not start on the new partion. What is the simplest way of migrating this instance into the new partion with a different name and IP? Do I need to reinstall or can I change the profiles so that it will start up.

That worked and the create system ran... but, I get this error as I deleted the profiles and the trans config
                                                                                Program XDNCONTROL in library *LIBL not found.
Error found on CALL command.
Environment variable added.
Job 001402/QASOFR/STRRMTDB submitted to job queue QBATCH in library QGPL.
Environment variable removed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
O4STRSAP: Could not retrieve instance/system configuration for instance 02
   of system QAS on host PPAK0055 from directory
   "/usr/sap/trans/config/QAS".
Ownership of object SAPIPCFG in QTEMP type *USRSPC changed.
Ownership of object SAPIPCFG in QTEMP type *USRSPC changed.
O4STRSAP: Starting instance 02 of system QAS on host PPAK0055 is not
   possible. System configuration can not be retrieved.
Errors occurred in command.
Bottom

How to change ASE server name in windows

how to change the server name in Adaptive server enterprise running on windows

Windows is going to require a few more steps if ASE is running as a service.
Update all registry entries containing <servername> with <newservername>:
HKLM\SOFTWARE\SYBASE\Server
HKLM\SYSTEM\CurrentControlSet\Services\SYBSQL_<servername>[ _BS | _XP ]
NOTE: Doing a registry search on <servername> will bring up a ton of other locations, eg, legacy entries, ControlSet00X, etc ... not sure if all of these have to be changed, too ...
NOTE: Haven't installed any of the latest ASE packages in windows so don't know if SAP's gone an changed the HKLM\SOFTWARE sub-branch name from SYBASE to SAP
=========================
In addition to Ryan's notes:
- any other sysservers entries that refer to the old servername (eg, loopback)
- any remote servers would need to update their external/remote logins, remote servers and/or proxy definitions ... as appropriate
- if the ASE is involved in replication then you're looking at whole 'nother can of worms ... off the top of my head ... rs_databases, rs_idnames, rs_repdbs ... and of course any repdefs/subs that include the ASE name ?
- obviously (?) any monitoring/maintenance/operational jobs ... documentation ...

Connection Failed: The server "name" may not exist or it is unavailable...

So I think I know what caused this problem, but I can't figure out how to make it stop...
When I go to print, if I try to click on the pop-up to change the default printer setting, there's a LONG delay, then I get a dialog that says:
Connection Failed
The server "name" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, then try again.
Then there's another delay and I get the message a second time. I can then select any of my printer settings and print fine, it's just an annoying delay if I click on that pop-up accidentally or need to change it.
I have a new iMac and I migrated from my old G5. The "name" of the server it is seeking is my old G5, so that must be in the settings somewhere, but I can't find it. I tried going into the Print & Fax settings in System Preferences, deleting the printer there, and then re-adding, but that didn't clear it up.
Thanks for any insight you can provide!
--John

Hmm, well, this stopped working again for me. I tried swapping ethernet and re-installing the Airport client update - to no avail. I could always see my Mac shares from PCs though. However, I have (for now) managed to connect to the PC using ip address rather than name even though finder quite clearly sees the name. Does your printer connection work by ip rather than name ? I'm going to play name lookup detective for a bit now - it's some kind of Netbios name lookup issue I guess as I've no local DNS service. resolv.conf is apparently not used so a bit of learning to do! ...
... nmblookup seems to work but nslookup doesn't. Looks like SL connect via Finder isn't using nmblookup properly and I can't see how to make that work. When this gets reported enough it should get a publicised work-round or a fix. If only I can get dig/nslookup to slave out to nmblookup ...must be something I can configure for that ??

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

How to change Server Name on BPC Connection Wizard in Mass

Hi there,
I need to know if there's a way to change Server Name in Connection Wizard on a large number of PCs, using a configuration file that can be deployed to the PCs that need the change.
Thanks for your response.
Cheers,
Rodrigo

Apparently the Server name is stored under:
HKEY_LOCAL_USER\Software\VB and VBA Program Settings\Outlooksoft
5\LATEST for each user who uses BPC under the data containing "SERVER"
So this is going to help on this requirement, previous a registry backup.
Cheers,
Rodrigo

Check the server name or IP address, check your network connection, and the

Hi,
I'm getting this error message "Check the server name or IP address, check your network connection, and then try again" when I try to access my Windows computer on my home network. I never had problems before... I don't understand why this message suddenly appeared keeping me from accessing the shared folder on my XP based computer.
Thanks

Hedi ® wrote:
Hi,
I'm getting this error message "Check the server name or IP address, check your network connection, and then try again"
This means that your Mac is not seeing your WinBox, either by IP address (a series of four sets of three numbers which might look something like this: 192.168.001.010) or by name (usually a SMB connection, which would look something like this: 'smb://winboxname' where 'winboxname' is the name of your WinBox).
Typically this means that you were connected by IP, and the target's IP address has changed.
when I try to access my Windows computer on my home network. I never had problems before...
You probably have DHCP enabled on your home net, and your WnBox's IP address has changed because its old lease expired. That kind of thing is why you should set up your net to either have fixed IP addresses or to reserve a specific IP for a specific machine, or you should use the smb name instead of the IP.
I don't understand why this message suddenly appeared keeping me from accessing the shared folder on my XP based computer.
See above. If you want to connect by IP address, you'll need to know the WinBox's IP. Go to your Start menu, select the 'Run' box, type 'cmd', hit Enter. You'll get the Windows terminal. In the terminal type 'ipconfig/all'. You'll see the IP address (and the MAC address, useful if you want to set up a reserved IP address). Ensure that the Mac is connecting to that IP. (enter 'smb://theIP' in the network connection box.)
If you want to connect by name, you'll need to know the WinBox's name. Right-click on 'my computer', select 'properties'. Click on the 'computer name' tab. There it is. Use 'smb://computername' in the network connection box.
Thanks

Must I reinstal Oracle if I change the server's host name

My oracle817 is running on the windows2000 platform and works well.
But when I changed the W2K server's host name, the OracleOraHome81Agent service can't be started. What's wrong with it? Must I reinstall the oracle to comply with the host name?
Thanks in advance
John

Eric Walton wrote:
I do NOT want to change the adminstrator short name or the administrator password. But I'm wondering whether I can change the administrator long name (account name?) by editing the "Name:" field in the administrator's account pane under the Password tab. And if I can change the name is this is a good idea or will I open a pandora's box of problems.
I changed the long name & did not observe any problems.
Permission problems? - will there be ownership problems if the account owner's long name is changed but the short name is not,
Mac OS X uses the short name internally.
Login problems? - I assume the login window will show the usual picture icon for the administrator but with the new long name. And by clicking the icon I'll have no problem logging in as long as I supply the old unchanged password.
correct
File sharing problems? - If I want to login (Connect) to the administrator's account from another machine then could I use either the new administrator long name or the old unchanged short name to do this?
Have not tried this. You can use the short name.

Changing the server name on package connection string.

Similar Messages

Maybe you are looking for