Changing zoom angle with transition manager

Hi guys and gals,
I'm making a map and would like to be able to zoom in and out
of counties. I've got most of it down I believe, but would like to
be able to control where the zoomed in image ends up. I'm using the
transition manager information I found
here.
Here is what my code looks like:
_root.img_dunn_mc._x = 82;
_root.img_dunn_mc._y = 235;
mx.transitions.TransitionManager.start(img_dunn_mc,
{type:mx.transitions.Zoom, direction:0, duration:.5});
The x and y values are to make it appear that the county is
zooming in from a specific spot on the map. When it zooms in, it
simply makes the clip bigger. Is there a way to control the x and y
coordinates of the zoomed in image?
Wow, I hope that made some sense.
Thanks!
Matt

It used to work perfectly fine - if I changed my mind while watching/fine tuning an edit, or wanted to see what the other angle would look and I had already put a crossfade, it would be a seamless transition between the two...the clip would change to the beginning of the edit, not to the end of the transition (and I could then remove the transition as it was superfluous). Which is why it came as a surprise that all of a sudden it has stopped working

Similar Messages

I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ?

I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting

I have an iPhone 4 also. If you are referring to the flyover view, its unavailble for the iPhone4. If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
Hope this helps

Changing port configuration with Event Manager

Hello,
I'm trying to change the configuration of a port when the port goes down with EEM.
So when an flex connect access-point is disconnected the port becomes an access-port.
I don't want to use the MAC address.
Does anyone has experience with this.
Below is the applet I'm using.
Thanks in advanced,
Michel
event manager applet CONFIG-ACCESS-PORT
event neighbor-discovery interface regexp "(FastEthernet[0-9]\/[0-9]+)" cdp delete
action 100 regexp "(AIR-LAP)" "$_nd_cdp_platform" value
action 110 if $_regexp_result eq "1"
action 200 cli command "enable"
action 210 cli command "config t"
action 220 cli command "interface $_nd_local_intf_name"
action 240 cli command "switchport mode access"
action 250 cli command "switchport access vlan 20"
action 260 cli command "no switchport trunk encapsulation dot1q"
action 270 cli command "no switchport trunk native vlan 88"
action 280 cli command "no switchport trunk allowed vlan 88,100"
action 290 cli command "spanning-tree portfast"
action 400 syslog msg "EXECUTED EEM APPLET FOR ACCESS-PORT interface $_nd_local_intf_name"
action 500 cli command "end"
action 510 cli command "copy run start"

Hi Evan,
For sure! There is a really good example on the configuration guide, and assciated caveats.
http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/consolidated/b_cg74_CONSOLIDATED_chapter_0100011.html
Benefits for using LAG is increased bandwidth, and redundancy - especially if you have the two (or more in the case of a 5508 WLC) ports connected to different physical switches, eg a 3750 stack.
Best,
Evan

Change Header Banner with transitions within Dreamweaver CS4

Is it possible to have a looping banner with
several graphics and transitions within Dreamweaver

Spry Basic Slideshow
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=2141542
Spry Content Slideshow
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=2141541
jQuery Banner Rotator
http://plugins.jquery.com/plugin-tags/banner
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Have Photoshop 7.0.1 - recently quit saving as or saving photos after changes. Just hangs until i kill process with task manager. Have uninstalled and reinstalled. Any suggestions? I don't want to upgrade to CC as I hate subscription services and often ha

Just hangs until i kill process with task manager. Have uninstalled and reinstalled. Any suggestions? I don't want to upgrade to CC as I hate subscription services and often have internet connection services interuppted.

Which operating system are you using?
Resetting the photoshop preferences might cure the problem.
Press and hold down the Shift+Ctrl+Alt keys down just after starting the launch of photoshop 7
(Shift-Command-Option on a mac)
Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop settings file
Press Yes

T430s not entering 30 Day Standby with Power Manager

I have a T430s with Windows 7 Pro 64-bit that is not entering 30 Day Standby like it should. The issue seems to lie with Power Manager.
Inside of Power Manager I have the 30 Day Standby option checked, just like I should, and it is also reflected in the BIOS setup as well. If I change the BIOS transition time for 30 Day Standby to "Immediately" and start Windows, but don't log in, and put the computer to sleep. It almost immediately wakes up and transitions into 30-day standby.
Now I know that Power Manager has a "hard coded" setting of 3 hours, regardless of the BIOS setting. So after 3 hours, Power Manager will automatically wake up the computer like it would to transfer to 30-day standby, but it just goes back to normal sleep.
Today while on battery, it did this twice (according to the Windows Event Log) Wake up, and go back to Sleep / Standby (S3). In the logs, the wake source is listed as "Unknown" when it goes back to sleep 10 or so seconds later is listed as "Application API".
Like I said, I was running on battery, and I also went into device manager and unchecked anything I could think of that would have an option of "Allow this device to wake the computer". I also disabled the Wake-on-LAN option for the LAN card. Plus I had all USB devices unplugged, as well as no Ethernet cable in the LAN port anyway. Plus it does transition to the 30-Day standby if I force the computer to sleep at the login screen before Power Manager is loaded.
If anyone could help me get this resolved I'd really appreciate it!!
EDIT: I just wanted to add I should have all driver / software updates as of Dec. 1 or so. I'm running Power Manager 6.63.1 and Power Management Driver 1.67.4.4.
Solved!
Go to Solution.

I could not reproduce any problem with the following configuration:
T430s
BIOS 2.57
All BIOS default settings
Windows 7 64-bit
Power Management Driver 1.67.4.4
Power Manager 6.63.1
I'm not sure what could cause this on your computer, but I would try the following things:
Load BIOS default settings (enter BIOS F1 Setup, press F9 to load defaults, F10 to save & exit)
Toggle the setting for 30 Day Standby in Power Manager. Turn if off, reboot the computer, turn it on, reboot the computer.
By the way, you can actually change the 3-hour timer by modifying registry. There just isn't any option for it in the Power Manager GUI.
HKLM\Software\Wow6432Node\Lenovo\PWRMGRV\Data\ISSC
There's a value called "S3TimerForIFFS". This is the number of minutes until 30 Day Standby Deep Sleep starts. The default value is 180. You can change it to any value 1 or greater. This timer is not exact but should be within a few minutes.

Cant sign into iTunes with VPP manager email address

Is anyone else having difficulty signing into iTunes with their Apple VPP account manager email address? I work as an IT contractor for a number of schools and in the past have set up VPP so that paid and free apps can be distributed via an MDM solution. Recently, the process by which we do this isn't working any more. Apple have admitted in emails that they have changed the way that VPP accounts are set up on their end and that during the transition some accounts were processed incorrectly (causing a lot of headaches and confusion). In one instance, we set up the VPP manager account using a distribution list email address of .*******. later, we enabled two step verification and provisioned the facilitator account. but when we sent to sign into the iTunes store with the management accounts email address, we got the error message: "this email is associated with he VPP program". We have told apple about this who replied with a frustrating tautology: "our records indicate that that address is associated with the VPP program, so you will have to use another email address to sign into iTunes." Trouble is, for the purposes of information management, we cant just sign into iTunes with any old email address, we have to use one provisioned by the education department, and they wont provision another email address for this.. Also, we have screenshots which demonstrate that it is possible to sign into iTunes with the program manager account at other schools, so what has changed? If this keeps up, I will have no choice but to recommend to all schools in future that they not go with Apple because their account provision system is not maintained at a professional level. The fact that they are so slow moving on this makes me look bad and the lack of documentation is inexcusable given the massive profits they have been posting. I will campaign vehemently against the use of apple in education unless this situation changes for the better. Already one school on our books have had an absolute gut-full of and have sold off the 60 iPads they purchased in favor of Android tablets with custom ROMS. What is the solution and why is there no phone number for Apple VPP in Australia?
<Edited by Host>

I know this post is over a year old. We setup our VPP account in Feb last year. It's very frustrating.
This is what I wrote to Apple.
This whole system *****!!!!
Seriously. I sign up under the old system and now we have to go through more doors to get in than a gold refinery.
You honestly think your product is worth this much pain. Get real!!!
I work at a school as THE ONLY IT Support Officer. I setup a generic user account for VPP under the old system so that the account was not tied to my name just in case I left or someone else had to take over the role. Now we cant use that account to manage the VPP account. We have to create other admin accounts. Trouble is, most of us already have our personal emails attached to iTunes accounts, AND YOUR SYSTEM WON'T LET US USE THESE ACCOUNTS TO BE ADMINS FOR OUR VPP ACCOUNT BECAUSE THEY ARE ALREADY ATTACHED TO AN ITUNES ACCOUNT!!!!!!!!!!!!!!!!!!!!!
Now I'm home and I can't remember my logon password and cant recall my recovery key because it's all back at work on a system I cant access until 2 weeks from now when the school holidays are over.
Well done Apple, you managed to make Microsoft look good!
The generic email account we setup is a distribution list account for the purposes of adding and removing people as needed. Apples change now means that we have to create more email accounts. I won't be doing that any time soon, I already have 5 and not about to create moer.
I too will not be recommending that schools go with Apple products. They are a consumer product, not an enterprise product. The promise you the world and all you get is pain.

Is there a Java utility class to help with data management in a desktop UI?

Is there a Java utility class to help with data management in a desktop UI?
I am writing a UI to configure a network device that will be connected to the serial port of the computer while it is being configured. There is no web server or database for my application. The UI has a large number of fields (50+) spread across 16 tabs. I will write the UI in Java FX. It should run inside the browser when launched, and issue commands to the network device through the serial port. A UI has several input fields spread across tabs and one single Submit button. If a field is edited, and the submit button clicked, it issues a command and sends the new datum to the device, retrieves current value and any errors. so if input field has bad data, it is indicated for example, the field has a red border.
Is there a standard design pattern or Java utility class to accomplish the frequently encountered, 'generic' parts of this scenario? lazy loading, submitting only what fields changed, displaying what fields have errors etc. (I dont want to reinvent the wheel if it is already there). Otherwise I can write such a class and share it back here if it is useful.
someone recommended JGoodies Bindings for Swing - will this work well and in FX?

Many thanks for the reply.
In the servlet create an Arraylist and in th efor
loop put the insances of the csqabean in this
ArrayList. Exit the for loop and then add the
ArrayList as an attribute to the session.I am making the use of Vector and did the same thing as u mentioned.I am using scriplets...
>
In the jsp retrieve the array list from the session
and in a for loop step through the ArrayList
retrieving each CourseSectionQABean and displaying.
You can do this in a scriptlet but should also check
out the jstl tags.I am able to remove this problem.Thanks again for the suggestion.
AS

Too Slow - Domino 6.5.4 with access manager agent 2.2 ?

I don't know how to tune Domino 6.5.4 with access manager agent 2.2?
I think AMAgent.properties is not good for SSO.
Please help me to tune it.
# $Id: AMAgent.properties,v 1.103 2005/09/19 22:08:34 madan Exp $
# Copyright ? 2002 Sun Microsystems, Inc. All rights reserved.
# U.S. Government Rights - Commercial software. Government users are
# subject to the Sun Microsystems, Inc. standard license agreement and
# applicable provisions of the FAR and its supplements. Use is subject to
# license terms. Sun, Sun Microsystems, the Sun logo and Sun ONE are
# trademarks or registered trademarks of Sun Microsystems, Inc. in the
# U.S. and other countries.
# Copyright ? 2002 Sun Microsystems, Inc. Tous droits r閟erv閟.
# Droits du gouvernement am閞icain, utlisateurs gouvernmentaux - logiciel
# commercial. Les utilisateurs gouvernmentaux sont soumis au contrat de
# licence standard de Sun Microsystems, Inc., ainsi qu aux dispositions en
# vigueur de la FAR [ (Federal Acquisition Regulations) et des suppl閙ents
# ? celles-ci.
# Distribu? par des licences qui en restreignent l'utilisation. Sun, Sun
# Microsystems, le logo Sun et Sun ONE sont des marques de fabrique ou des
# marques d閜os閑s de Sun Microsystems, Inc. aux Etats-Unis et dans
# d'autres pays.
# The syntax of this file is that of a standard Java properties file,
# see the documentation for the java.util.Properties.load method for a
# complete description. (CAVEAT: The SDK in the parser does not currently
# support any backslash escapes except for wrapping long lines.)
# All property names in this file are case-sensitive.
# NOTE: The value of a property that is specified multiple times is not
# defined.
# WARNING: The contents of this file are classified as an UNSTABLE
# interface by Sun Microsystems, Inc. As such, they are subject to
# significant, incompatible changes in any future release of the
# software.
# The name of the cookie passed between the Access Manager
# and the SDK.
# WARNING: Changing this property without making the corresponding change
# to the Access Manager will disable the SDK.
com.sun.am.cookie.name = iPlanetDirectoryPro
# The URL for the Access Manager Naming service.
com.sun.am.naming.url = http://sportal.yjy.dqyt.petrochina:80/amserver/namingservice
# The URL of the login page on the Access Manager.
com.sun.am.policy.am.login.url = http://sportal.yjy.dqyt.petrochina:80/amserver/UI/Login
# Name of the file to use for logging messages.
com.sun.am.policy.agents.config.local.log.file = c:/Sun/Access_Manager/Agents/2.2/debug/C__Lotus_Domino/amAgent
# This property is used for Log Rotation. The value of the property specifies
# whether the agent deployed on the server supports the feature of not. If set
# to false all log messages are written to the same file.
com.sun.am.policy.agents.config.local.log.rotate = true
# Name of the Access Manager log file to use for logging messages to
# Access Manager.
# Just the name of the file is needed. The directory of the file
# is determined by settings configured on the Access Manager.
com.sun.am.policy.agents.config.remote.log = amAuthLog.Dominoad.yjy.dqyt.petrochina.80
# Set the logging level for the specified logging categories.
# The format of the values is
#     <ModuleName>[:<Level>][,<ModuleName>[:<Level>]]*
# The currently used module names are: AuthService, NamingService,
# PolicyService, SessionService, PolicyEngine, ServiceEngine,
# Notification, PolicyAgent, RemoteLog and all.
# The all module can be used to set the logging level for all currently
# none logging modules. This will also establish the default level for
# all subsequently created modules.
# The meaning of the 'Level' value is described below:
#     0     Disable logging from specified module*
#     1     Log error messages
#     2     Log warning and error messages
#     3     Log info, warning, and error messages
#     4     Log debug, info, warning, and error messages
#     5     Like level 4, but with even more debugging messages
# 128     log url access to log file on AM server.
# 256     log url access to log file on local machine.
# If level is omitted, then the logging module will be created with
# the default logging level, which is the logging level associated with
# the 'all' module.
# for level of 128 and 256, you must also specify a logAccessType.
# *Even if the level is set to zero, some messages may be produced for
# a module if they are logged with the special level value of 'always'.
com.sun.am.log.level =
# The org, username and password for Agent to login to AM.
com.sun.am.policy.am.username = UrlAccessAgent
com.sun.am.policy.am.password = LYnKyOIgdWt404ivWY6HPQ==
# Name of the directory containing the certificate databases for SSL.
com.sun.am.sslcert.dir = c:/Sun/Access_Manager/Agents/2.2/domino/cert
# Set this property if the certificate databases in the directory specified
# by the previous property have a prefix.
com.sun.am.certdb.prefix =
# Should agent trust all server certificates when Access Manager
# is running SSL?
# Possible values are true or false.
com.sun.am.trust_server_certs = true
# Should the policy SDK use the Access Manager notification
# mechanism to maintain the consistency of its internal cache? If the value
# is false, then a polling mechanism is used to maintain cache consistency.
# Possible values are true or false.
com.sun.am.notification.enable = true
# URL to which notification messages should be sent if notification is
# enabled, see previous property.
com.sun.am.notification.url = http://Dominoad.yjy.dqyt.petrochina:80/amagent/UpdateAgentCacheServlet?shortcircuit=false
# This property determines whether URL string case sensitivity is
# obeyed during policy evaluation
com.sun.am.policy.am.url_comparison.case_ignore = true
# This property determines the amount of time (in minutes) an entry
# remains valid after it has been added to the cache. The default
# value for this property is 3 minutes.
com.sun.am.policy.am.polling.interval=3
# This property allows the user to configure the User Id parameter passed
# by the session information from the access manager. The value of User
# Id will be used by the agent to set the value of REMOTE_USER server
# variable. By default this parameter is set to "UserToken"
com.sun.am.policy.am.userid.param=UserToken
# Profile attributes fetch mode
# String attribute mode to specify if additional user profile attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user profile attributes will be introduced.
# HTTP_HEADER - additional user profile attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user profile attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
# The user profile attributes to be added to the HTTP header. The
# specification is of the format ldap_attribute_name|http_header_name[,...].
# ldap_attribute_name is the attribute in data store to be fetched and
# http_header_name is the name of the header to which the value needs
# to be assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organizational-unit,o|organization,mail|email,employeenumber|employee-
number,c|country
# Session attributes mode
# String attribute mode to specify if additional user session attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user session attributes will be introduced.
# HTTP_HEADER - additional user session attributes will be introduced into HTTP header.
# HTTP_COOKIE - additional user session attributes will be introduced through cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
# The session attributes to be added to the HTTP header. The specification is
# of the format session_attribute_name|http_header_name[,...].
# session_attribute_name is the attribute in session to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.session.attribute.map=
# Response Attribute Fetch Mode
# String attribute mode to specify if additional user response attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user response attributes will be introduced.
# HTTP_HEADER - additional user response attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user response attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
# The response attributes to be added to the HTTP header. The specification is
# of the format response_attribute_name|http_header_name[,...].
# response_attribute_name is the attribute in policy response to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.response.attribute.map=
# The cookie name used in iAS for sticky load balancing
com.sun.am.policy.am.lb.cookie.name = GX_jst
# indicate where a load balancer is used for Access Manager
# services.
# true | false
com.sun.am.load_balancer.enable = false
####Agent Configuration####
# this is for product versioning, please do not modify it
com.sun.am.policy.agents.config.version=2.2
# Set the url access logging level. the choices are
# LOG_NONE - do not log user access to url
# LOG_DENY - log url access that was denied.
# LOG_ALLOW - log url access that was allowed.
# LOG_BOTH - log url access that was allowed or denied.
com.sun.am.policy.agents.config.audit.accesstype = LOG_DENY
# Agent prefix
com.sun.am.policy.agents.config.agenturi.prefix = http://Dominoad.yjy.dqyt.petrochina:80/amagent
# Locale setting.
com.sun.am.policy.agents.config.locale = en_US
# The unique identifier for this agent instance.
com.sun.am.policy.agents.config.instance.name = unused
# Do SSO only
# Boolean attribute to indicate whether the agent will just enforce user
# authentication (SSO) without enforcing policies (authorization)
com.sun.am.policy.agents.config.do_sso_only = true
# The URL of the access denied page. If no value is specified, then
# the agent will return an HTTP status of 403 (Forbidden).
com.sun.am.policy.agents.config.accessdenied.url =
# This property indicates if FQDN checking is enabled or not.
com.sun.am.policy.agents.config.fqdn.check.enable = true
# Default FQDN is the fully qualified hostname that the users should use
# in order to access resources on this web server instance. This is a
# required configuration value without which the Web server may not
# startup correctly.
# The primary purpose of specifying this property is to ensure that if
# the users try to access protected resources on this web server
# instance without specifying the FQDN in the browser URL, the Agent
# can take corrective action and redirect the user to the URL that
# contains the correct FQDN.
# This property is set during the agent installation and need not be
# modified unless absolutely necessary to accommodate deployment
# requirements.
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
# See also: com.sun.am.policy.agents.config.fqdn.check.enable,
# com.sun.am.policy.agents.config.fqdn.map
com.sun.am.policy.agents.config.fqdn.default = Dominoad.yjy.dqyt.petrochina
# The FQDN Map is a simple map that enables the Agent to take corrective
# action in the case where the users may have typed in an incorrect URL
# such as by specifying partial hostname or using an IP address to
# access protected resources. It redirects the browser to the URL
# with fully qualified domain name so that cookies related to the domain
# are received by the agents.
# The format for this property is:
# com.sun.am.policy.agents.config.fqdn.map = [invalid_hostname|valid_hostname][,...]
# This property can also be used so that the agents use the name specified
# in this map instead of the web server's actual name. This can be
# accomplished by doing the following.
# Say you want your server to be addressed as xyz.hostname.com whereas the
# actual name of the server is abc.hostname.com. The browsers only knows
# xyz.hostname.com and you have specified polices using xyz.hostname.com at
# the Access Manager policy console, in this file set the mapping as
# com.sun.am.policy.agents.fqdn.map = valid|xyz.hostname.com
# Another example is if you have multiple virtual servers say rst.hostname.com,
# uvw.hostname.com and xyz.hostname.com pointing to the same actual server
# abc.hostname.com and each of the virtual servers have their own policies
# defined, then the fqdnMap should be defined as follows:
# com.sun.am.policy.agents.fqdn.map = valid1|rst.hostname.com,valid2|uvw.hostname.com,valid3|xyz.hostname.com
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
com.sun.am.policy.agents.config.fqdn.map =
# Cookie Reset
# This property must be set to true, if this agent needs to
# reset cookies in the response before redirecting to
# Access Manager for Authentication.
# By default this is set to false.
# Example : com.sun.am.policy.agents.config.cookie.reset.enable=true
com.sun.am.policy.agents.config.cookie.reset.enable=false
# This property gives the comma separated list of Cookies, that
# need to be included in the Redirect Response to Access Manager.
# This property is used only if the Cookie Reset feature is enabled.
# The Cookie details need to be specified in the following Format
# name[=value][;Domain=value]
# If "Domain" is not specified, then the default agent domain is
# used to set the Cookie.
# Example : com.sun.am.policy.agents.config.cookie.reset.list=LtpaToken,
# token=value;Domain=subdomain.domain.com
com.sun.am.policy.agents.config.cookie.reset.list=
# This property gives the space separated list of domains in
# which cookies have to be set in a CDSSO scenario. This property
# is used only if CDSSO is enabled.
# If this property is left blank then the fully qualified cookie
# domain for the agent server will be used for setting the cookie
# domain. In such case it is a host cookie instead of a domain cookie.
# Example : com.sun.am.policy.agents.config.cookie.domain.list=.sun.com .iplanet.com
com.sun.am.policy.agents.config.cookie.domain.list=
# user id returned if accessing global allow page and not authenticated
com.sun.am.policy.agents.config.anonymous_user=anonymous
# Enable/Disable REMOTE_USER processing for anonymous users
# true | false
com.sun.am.policy.agents.config.anonymous_user.enable=false
# Not enforced list is the list of URLs for which no authentication is
# required. Wildcards can be used to define a pattern of URLs.
# The URLs specified may not contain any query parameters.
# Each service have their own not enforced list. The service name is suffixed
# after "# com.sun.am.policy.agents.notenforcedList." to specify a list
# for a particular service. SPACE is the separator between the URL.
com.sun.am.policy.agents.config.notenforced_list = http://dominoad.yjy.dqyt.petrochina/*.nsf http://dominoad.yjy.dqyt.petrochina/teamroom.nsf/TROutline.gif?
OpenImageResource http://dominoad.yjy.dqyt.petrochina/icons/*.gif
# Boolean attribute to indicate whether the above list is a not enforced list
# or an enforced list; When the value is true, the list means enforced list,
# or in other words, the whole web site is open/accessible without
# authentication except for those URLs in the list.
com.sun.am.policy.agents.config.notenforced_list.invert = false
# Not enforced client IP address list is a list of client IP addresses.
# No authentication and authorization are required for the requests coming
# from these client IP addresses. The IP address must be in the form of
# eg: 192.168.12.2 1.1.1.1
com.sun.am.policy.agents.config.notenforced_client_ip_list =
# Enable POST data preservation; By default it is set to false
com.sun.am.policy.agents.config.postdata.preserve.enable = false
# POST data preservation : POST cache entry lifetime in minutes,
# After the specified interval, the entry will be dropped
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
# Cross-Domain Single Sign On URL
# Is CDSSO enabled.
com.sun.am.policy.agents.config.cdsso.enable=false
# This is the URL the user will be redirected to for authentication
# in a CDSSO Scenario.
com.sun.am.policy.agents.config.cdcservlet.url =
# Enable/Disable client IP address validation. This validate
# will check if the subsequent browser requests come from the
# same ip address that the SSO token is initially issued against
com.sun.am.policy.agents.config.client_ip_validation.enable = false
# Below properties are used to define cookie prefix and cookie max age
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
# Logout URL - application's Logout URL.
# This URL is not enforced by policy.
# if set, agent will intercept this URL and destroy the user's session,
# if any. The application's logout URL will be allowed whether or not
# the session destroy is successful.
com.sun.am.policy.agents.config.logout.url=
#http://sportal.yjy.dqyt.petrochina/amserver/UI/Logout
# Any cookies to be reset upon logout in the same format as cookie_reset_list
com.sun.am.policy.agents.config.logout.cookie.reset.list =
# By default, when a policy decision for a resource is needed,
# agent gets and caches the policy decision of the resource and
# all resource from the root of the resource down, from the Access Manager.
# For example, if the resource is http://host/a/b/c, the the root of the
# resource is http://host/. This is because more resources from the
# same path are likely to be accessed subsequently.
# However this may take a long time the first time if there
# are many many policies defined under the root resource.
# To have agent get and cache the policy decision for the resource only,
# set the following property to false.
com.sun.am.policy.am.fetch_from_root_resource = true
# Whether to get the client's hostname through DNS reverse lookup for use
# in policy evaluation.
# It is true by default, if the property does not exist or if it is
# any value other than false.
com.sun.am.policy.agents.config.get_client_host_name = false
# The following property is to enable native encoding of
# ldap header attributes forwarded by agents. If set to true
# agent will encode the ldap header value in the default
# encoding of OS locale. If set to false ldap header values
# will be encoded in UTF-8
com.sun.am.policy.agents.config.convert_mbyte.enable = false
#When the not enforced list or policy has a wildcard '*' character, agent
#strips the path info from the request URI and uses the resulting request
#URI to check against the not enforced list or policy instead of the entire
#request URI, in order to prevent someone from getting access to any URI by
#simply appending the matching pattern in the policy or not enforced list.
#For example, if the not enforced list has the value http://host/*.gif,
#stripping the path info from the request URI will prevent someone from
#getting access to http://host/index.html by using the URL http://host/index.html?hack.gif.
#However when a web server (for exmample apache) is configured to be a reverse
#proxy server for a J2EE application server, path info is interpreted in a different
#manner since it maps to a resource on the proxy instead of the app server.
#This prevents the not enforced list or policy from being applied to part of
#the URI below the app serverpath if there is a wildcard character. For example,
#if the not enforced list has value http://host/webapp/servcontext/* and the
#request URL is http://host/webapp/servcontext/example.jsp the path info
#is /servcontext/example.jsp and the resulting request URL with path info stripped
#is http://host/webapp, which will not match the not enforced list. By setting the
#following property to true, the path info will not be stripped from the request URL
#even if there is a wild character in the not enforced list or policy.
#Be aware though that if this is set to true there should be nothing following the
#wildcard character '*' in the not enforced list or policy, or the
#security loophole described above may occur.
com.sun.am.policy.agents.config.ignore_path_info = false
# Override the request url given by the web server with
# the protocol, host or port of the agent's uri specified in
# the com.sun.am.policy.agents.agenturiprefix property.
# These may be needed if the agent is sitting behind a ssl off-loader,
# load balancer, or proxy, and either the protocol (HTTP scheme),
# hostname, or port of the machine in front of agent which users go through
# is different from the agent's protocol, host or port.
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port =
# Override the notification url in the same way as other request urls.
# Set this to true if any one of the override properties above is true,
# and if the notification url is coming through the proxy or load balancer
# in the same way as other request url's.
com.sun.am.policy.agents.config.override_notification.url =
# The following property defines how long to wait in attempting
# to connect to an Access Manager AUTH server.
# The default value is 2 seconds. This value needs to be increased
# when receiving the error "unable to find active Access Manager Auth server"
com.sun.am.policy.agents.config.connection_timeout =
# Time in milliseconds the agent will wait to receive the
# response from Access Manager. After the timeout, the connection
# will be drop.
# A value of 0 means that the agent will wait until receiving the response.
# WARNING: Invalid value for this property can result in
# the resources becoming inaccessible.
com.sun.am.receive_timeout = 0
# The three following properties are for IIS6 agent only.
# The two first properties allow to set a username and password that will be
# used by the authentication filter to pass the Windows challenge when the Basic
# Authentication option is selected in Microsoft IIS 6.0. The authentication
# filter is named amiis6auth.dll and is located in
# Agent_installation_directory/iis6/bin. It must be installed manually on
# the web site ("ISAPI Filters" tab in the properties of the web site).
# It must also be uninstalled manually when unintalling the agent.
# The last property defines the full path for the authentication filter log file.
com.sun.am.policy.agents.config.iis6.basicAuthentication.username =
com.sun.am.policy.agents.config.iis6.basicAuthentication.password =
com.sun.am.policy.agents.config.iis6.basicAuthentication.logFile = c:/Sun/Access_Manager/Agents/2.2/debug/C__Lotus_Domino/amAuthFilter

Hi,
I installed opensso (so Sun Java(TM) System Access Manager 7.5) and the agent for Domino 6.5.4 and I have the message in logs "amAgent"
2007-07-11 18:40:16.119 Error 1708:3dbcf768 PolicyAgent: render_response(): Entered.
I have the box to identify but it doesnot connect me on my opensso server.
It still identify with Domino's server
Thanks for your response
Thomas

System Monitoring with Solution Manager Ehp1

Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.

Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
               with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
          with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key:   10 Pool
            Size configured.....:   642000000 ( 612.3 MB)
            Size min. estimated.:   637597428 ( 608.1 MB)
            Advised Size........:   640000000 ( 610.4 MB)
Key:   40 Pool for database buffers
            Size configured.....: 1048000000 ( 999.4 MB)
            Size min. estimated.: 1468229308 (1400.2 MB)
            Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key:        1 Size:        2500 (   0.0 MB) System administration
Key:        4 Size:      523648 (   0.5 MB) statistic area
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:    67108964 ( 64.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       11 Size:      500000 (   0.5 MB) Factory calender buffer
Key:       12 Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
Key:       13 Size:   200500000 ( 191.2 MB) Alert Area
Key:       16 Size:       22400 (   0.0 MB) Semaphore activity monitoring
Key:       17 Size:     2672386 (   2.5 MB) Roll administration
Key:       30 Size:       37888 (   0.0 MB) Taskhandler runtime admin.
Key:       31 Size:     4806000 (   4.6 MB) Dispatcher request queue
Key:       33 Size:    39936000 ( 38.1 MB) Table buffer, part.buffering
Key:       34 Size:    20480000 ( 19.5 MB) Enqueue table
Key:       51 Size:     3200000 (   3.1 MB) Extended memory admin.
Key:       52 Size:       40000 (   0.0 MB) Message Server buffer
Key:       54 Size:    20488192 ( 19.5 MB) Export/Import buffer
Key:       55 Size:        8192 (   0.0 MB) Spool local printer+joblist
Key:       57 Size:     1048576 (   1.0 MB) Profilparameter in shared mem
Key:       58 Size:        4096 (   0.0 MB) Enqueue ID for reset
Key:       62 Size:    85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key:        2 Size:    31168040 ( 29.7 MB) Disp. administration tables
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key:       14 Size:    28600000 ( 27.3 MB) Presentation buffer
Key:       19 Size:    90000000 ( 85.8 MB) Table-buffer
Key:       42 Size:    13920992 ( 13.3 MB) DB TTAB buffer
Key:       43 Size:    43422392 ( 41.4 MB) DB FTAB buffer
Key:       44 Size:     8606392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     6558392 (   6.3 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    13313024 ( 12.7 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:       18 Size:     1792100 (   1.7 MB) Paging adminitration
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900130 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....:         73
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB,   99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool:   34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................:    1
Warnings detected................:    9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
      compiled at   Jun 28 2010
      systemid      324 (IBM RS/6000 with AIX)
      relno         6400
      patch text    patch collection 2010/1, OSS note 1304480
      patchno       335
INFO Runtime:
      running on    saptqa01 AIX 3 5 00069A8FD600
      running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
      alert/MONI_SEGM_SIZE = 200000000
      alert/TRACE          = 1
      SAPSYSTEM            = 30
      SAPSYSTEMNAME        = TQA
      SAPLOCALHOST         = saptqa01
      DIR_CCMS             = /usr/sap/ccms
      DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
      DIR_PERF             = /usr/sap/tmp
INFO:
      pid           4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
        segment status     ENABLED
        segment started at Tue Sep 14 09:35:56 2010
        segment version    20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
       Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
       Please change configuration with profile parameters
           ipc/shm_psize_01 = -<different pool nr>
       xor
           ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1

[announce] PortalStudio 2.0 with Interaction Management

MONGOOSE TECHNOLOGY ANNOUNCES PORTALSTUDIO 2.0 WITH INTERACTION MANAGEMENT
Vendor-neutral portal platform now includes RealCommunities 2.0
collaboration applications and Interaction Management Web services
Houston, October 22, 2001 - Mongoose Technology, Inc., the company that set
the benchmark for Portal Lifecycle Management and the first company to
deliver a complete J2EET-based portal design, assembly, deployment, and
management solution, today announced Mongoose PortalStudioT 2.0. The
product, which provides an integrated development environment and portal
platform, now includes Mongoose RealCommunitiesT applications and
Interaction Management web services for online collaboration. Using Mongoose
PortalStudio and Mongoose RealCommunities, companies can incorporate
Interaction Management into their portals and Web sites to increase employee
productivity, enhance partner effectiveness, and build customer loyalty.
Delphi Group has defined Interaction Management: "Interaction management
refers to web applications used to cultivate relationships among portal
constituents. These person-to-person web services facilitate group
formation, enhance team collaboration, and empower knowledge exchange
between employees, customers, partners, and suppliers. Interaction
Management helps organizations capture and retain intellectual capital,
reduce employee turnover, increase team productivity, and build customer
loyalty."
"Interaction Management is a critical component of any portal strategy, and
necessary for effectively nurturing online community and user
relationships," says Nathaniel Palmer, Chief Analyst at Delphi Group. "In
PortalStudio, Mongoose provides the first comprehensive set of web services
for interaction management, within a application framework specifically
designed for deploying and managing portal components."
"We provide enterprise applications to the health care industry and
international retailers" said Brian Fox, Vice President of
MySoftwarePartner. "Our customers must provide timely and accurate
information to consumers and to government agencies. We are using Mongoose
PortalStudio to provide more useful information by aggregating our systems
with other corporate applications in the Enterprise Portal. We are
incorporating RealCommunities collaboration applications to improve customer
support and to reduce the cost of gathering and reporting consumer data. "
PortalStudio with Interaction Management
RealCommunities collaboration applications are modular WebComponentsT of the
PortalStudio platform that can be embedded into any Web site or portal. They
are supported by RealCommunities Web Services that provide open API's to
gather, store, and act upon person and activity related data.
"Interaction Management is the set of person-to-person web services that
support online relationships and transactions," says Mr. Palmer. The
RealCommunities Web Services are based on the Mongoose 12 Principles of
CollaborationT, and include Identity, Groups, Reputation, Environment and
Communication.
RealCommunities WebComponents provide structured interactions to support
group goals. These collaboration capabilities can be incorporated into new
or existing portals and Web sites. RealCommunities WebComponents include:
Expertise & Skills Directory - This application facilitates the search
for a person or a group with the expertise, skills, service capability, or
reputation matching the user's needs.
Engagement & Feedback - After identifying an appropriate individual or
group, the application allows the user to negotiate an agreement for a
consultative or service relationship with the provider and subsequently to
rate the quality and usefulness of the provider's services.
Messages & Chat - These WebComponents provide Message Boards, Chat, and
Instant Messaging
Question & Answer - This post-a-question and get-an-answer mechanism
can be a public or private dialog and is used for self-help and support
applications.
File Sharing & Collaboration - Users can access content from WebDAV
(Web-based distributed authoring and versioning) clients and DAV-enabled
software packages such as Mongoose PortalStudioT, Microsoft® Office XP,
Microsoft® Web Folders, Adobe Acrobat®, and Macromedia Dreamweaver®. Thus a
Word® user can directly open documents that are stored in PortalStudio-based
portals.
Review & Recommend - This facility enables community members to provide
opinions and ratings, look at what others are saying, and view a composite
score of any participant or document.
Rewards & Incentives - Reward employees, partners, or customers who
participate in desired online activities. The application can be configured
to promote loyalty by providing incentives and rewards for desired
behaviors. The rules are easy to configure and change as business needs
evolve.
Tests & Polls - This utility enables a service provider or group leader
to ask questions of a population. Rules can be applied to responses to
generate scoring reports or individualized actions, e.g., if pass test, then
update reputation and deliver certification by email.
Companies can enhance their ebusiness effectiveness with Mongoose
RealCommunitiesT Interaction Management applications for increasing
productivity of sales teams, cultivating buyer and partner loyalty,
capturing better market data, and accelerating innovation and time to
market.
PortalStudio 2.0 Delivers Fast Results
Mongoose PortalStudio 2.0 is a visual portal assembly environment that
allows users to quickly and easily design portal components, assemble them
into a portal, then validate and deploy their portal solution to, for
example, BEA WebLogic. The simplicity of PortalStudio 2.0's one-click wizard
for configuring and deploying to environments such as BEA WebLogic is
dramatic. Like a "portal compiler," the PortalStudio one-click wizard
eliminates timely editing of complex J2EE and BEA specific configuration
files.
Other powerful features and capabilities in PortalStudio 2.0 include:
Instant WebSkinT Personalization
The presentation of information can be customized to the individual or
company standards using Mongoose WebSkins. Users can pick an existing
WebSkin from the PortalStudio library and re-brand their Web application or
apply a custom look-and-feel in seconds. With PortalStudio's
"person-to-system" Web services, XML-based content can be aggregated,
categorized, searched, and cached, served up to various display devices, and
personalized depending on browser, browser version, user, role, locale,
display device, language, and custom rules. Altogether, users can build an
application once, access it from many convenient devices, and be greeted by
a personal presentation.
Aggregate Corporate Applications
Corporate applications and databases can be aggregated into the portal with
Mongoose PortalStudio's "system-to-system" Web services for aggregation,
mapping & merging, caching, scheduled queries, and Rules and Alarms.
Mongoose PortalStudio includes WebConnectors for XML, JDBC, JCA, and MS
Exchange.
Enhance Existing Applications
Mongoose's "federated" approach means users can use Mongoose's PortalStudio
to create a portal from scratch and deploy it on a J2EE application server
from any of the leading vendors; maintain and enhance existing portal
applications; or embed Mongoose WebComponents into an existing Web
application. WebComponents included with PortalStudio include Table, Tree,
News, Document Sharing, Document Search, Message Boards, Chat, Instant
Messaging, email, and a MiniBrowser with source code.
Availability and Pricing
Mongoose PortalStudio for BEA WebLogic and Mongoose PortalStudio 2.0
Enterprise Edition are currently available and 30-day free trials are
available at www.mongoosetech.com. PortalStudio 2.0 Enterprise Edition
supports leading J2EE application servers, including BEA WebLogic,
Oracle9iAS, Orion, Macromedia JRun, and IBM WebSphere. The Enterprise
Edition ships with the Standard library of components, plus RealCommunities
WebComponents and Interaction Management Web services.
Mongoose Technology shatters the $100,000 barrier for an Enterprise Portal.
Pricing begins at $3,000 for the PortalStudio Interactive Development
Environment (IDE) that includes a standard library of WebComponents,
RealCommunities Interaction Management WebComponents, a development-only
license of Orion Application server and a 30-day trial of BEA WebLogic. A
development license of PortalStudioT for BEA WebLogic® is available at an
introductory price of $995. The deployment license of the PortalStudio
Platform is available at an introductory price of $35,000 per CPU.
PortalStudio is available directly from Mongoose as well as through its
value-added resellers including: SSI Technologies, eKnowledgeCenter, and
Iconixx.
About Mongoose Technology, Inc.
Mongoose Technology, Inc. (www.mongoosetech.com) is delivering and setting
the benchmark for Portal Lifecycle Management products that are used
worldwide to design, assemble, deploy, and manage ebusiness portals. The
company's products include: Mongoose PortalStudioT Enterprise Edition, a
visual portal assembly environment for the rapid development of customized
enterprise portals on leading J2EE application servers; Mongoose
PortalStudioT for BEA WebLogicT; and Mongoose RealCommunitiesT Interaction
Management applications for increasing productivity of sales teams,
cultivating buyer and partner loyalty, capturing better market data, and
accelerating innovation and time to market. Major customers and partners
include: BEA (www.bea.com), eBay (www.ebay.com), and SSI Technologies
(www.ssi-americas.com). Mongoose Technology, Inc. was founded in 1999 and is
headquartered at 1300 Hercules, #130, Houston, Texas 77058; phone,
281/461-0099; fax, 281/461-0505.
For questions or comments about this press release, please contact:
[email protected]
[Bullet.gif]

Steps:
On CAS server, install the Reporting Point Service Role.
On System Center Configuration Manager Primary Site Server:
Create or edit the sms_def.mof file and configuration.mof file required for MBAM 2.0 manually.
Run MBAM 2.0 Setup and under Topology, choose System Center Configuration Manager Integration.
Select the Feature “System Center Configuration Manager” and proceed for Pre-requisites check.
All Pre-requisites check must be passed and complete the installation successfully.
On Standalone Server: - SQL Server.
Run MBAM 2.0 setup and choose Configuration Manager Integration.
Do not select System Center Configuration Manager feature.
Install the Recovery Database and Audit Database on the Database Server and reporting.
On Standalone - Web Server.
Run MBAM 2.0 setup and choose Configuration Manager Integration.
Select only the MBAM Admin and Monitoring Feature and Self Server Portal on the Web Server.
Manoj Sehgal

BAPI_GOODSMVT_CREATE, will do the goods receipt ( MB01 )for the subcontracting PO with batch management.

Dear Professionals ,
I Just want to confirm that whether BAPI "BAPI_GOODSMVT_CREATE " will do the goods receipt ( MB01 ) for the subcontracting PO with batch management.
Since I will be passing only 101 mvy type in BAPi, will the system automatically call 543 mvt type with batch management and post the consumption.
can I change the batch of the component items ?

Hi ,
Delivery note is like a ref document number
so you can use the
In the BAPI_GOODSMVT_CREATE There is header structure BAPI2017_GM_HEAD_01 which has a field REF_DOC_NO
you can pass the delivery note value to that field .
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jul 10, 2008 3:41 PM

SLED with Batch Management

HI Gurus,
We are using batch management for the material. At the time of goods receipt i am getting error
Shortfall of 100 days against remaining shelf life in current item (365 Day)
I have read some document and found that SLED calculate from the goods receipt document date with batch management. And i found the days difference error as follow.
For SLED of a batch calculates as follows:
SLED = total shelf life + production date from the goods receipt document.
Total shelf life is 365 day according to material master. 21.11.2012 Minas 365 remaing shelf life =13.11.2011
From November 2011 to todayu2019s date 21.02.2012. =100 days.
My question is : If system calculate SLED from the goods receipt (current date) for batch management. Then what is the use of enter manufacturing date in Goods Receipt.
And do i need to change manufacturing date to current date every time. even if material not manufactured in today's date (for example manuf in last month)
Please can any one help me to understand the scenario.
Thanks in Advance.
Ashish Panchal

Assume there is a joghurt.
it is produced on February 1 and has 30 days shelf life in material master, so he shelf life expiration date is March 2nd.
if you have a minimum remaining shelf life entered in your material master e.g. 5 days.
then system actls like this
If you receive this joghurt today (February 21) then you can receive without any error.
but if you want receive this joghurt on February 28, then you get the message "Shortfall of 3 days against remaining shelf life ..."
because your receipt date is withing the minimum remaining shelf life period.
this minimum remaining shelf life shall give you time enough to consume that material. otherwise it is expired before you start using it.
hence a minimum remaining shelf life must be much shorter than the total shelf life. an equal number makes it almost impossible to receive any good.

Problem with batch management indicator

Hi Gurus,
I have an issue with batch management.
There is one material which was not batch managed. The requirement was to make it batch managed. There were no open purchase orders and the only thing pending was the stock in the present and previous periods. The stock quantity in the previous period and the present period matched(470 Kg). I opened the previous posting period, used movement type 551 and scrapped the stock. There was zero stock for the current period and the present period.
I changed the batch management indicator successfully. Now the issue is whil i am trying to cancel the material document
1. Now that the material is batch managed, whie trying to cancel the material document using MIGO, the system prompts for a batch to be entered. But the batch field is greyed out and i am not able to enter a batch
2. I have tried to cancel the material document using MBST and MIGO. The sytem prompts for a batch to be entered but not allowing me to do so as the batch field is greyed out.
Any pointers will be appreciated.
Many Thanks,
Sajin

Hi Sajin,
What is a reason to cancel a material document? When was that material document created? Before or after flagging the indicator in the material master?
Ilya.

Packing handling units to outbound delivery with batch management

Hello all,
I am packing an outbound delivery with a material that has batch management active. The packing is from a storage location that manages handling units (HU-managed sloc).
My problem is u2013 before entering the HUs to the delivery u2013 the system asks me to enter the batches (in the batch split function). Only then I am allowed to enter the HUs in the packing function.
What could be the reason for this preliminary batch entries ?
How can I set the system not to do that, i.e., I would like to be able to enter the HUs directly without entering the batchs separately.
Thanks,
Isaac

Dear Isaac,
this system behaviour can not be changed in standard and is also not recommended to change it via a modification. The reason for this system behaviour is to avoid inconsistencies in the system. The HU that you assign to the delivery, should exactly fit to the delivery. In case if the material is batch managed, you should specify the batch first, and then add the fitting HU with exactly that batch.
I suppose you checked the longtext for HUDIALOG102, that you get in the described case, but I copy it for you, in case if you did not read it:
"Diagnosis
There are items to be handled in batches which have not yet been
assigned to a batch.
Batches must be recognized for items with HU-managed storage location
For items at a storage location that is not HU-managed, the item type
determines if packing will take place at cumulated item quantity level
(meaning that the batch is not recognized at any point in the handling
unit) or if packing must take place at batch level.
System Response
If an item requires batch identification, that item will not be
suggested for packing as long as the batch is not recognized.
Procedure
Go to the maintenance of the delivery item and assign at least one batch
to the item."
Regards,
Ely

Changing zoom angle with transition manager

Similar Messages

Maybe you are looking for