Characters in query not recognized in silverlight SQL management tool - firefox & mac

I have several problems working with the Azure SQL management portal ( silverlight ) on my Mac ( current issue is with Firefox but I have had the same problem with Chrome ).
Problem :
Queries I type in through the online editor come back with strange syntax errors regarding missing characters etc ( see attached screen shot )
I have got this error so many times that the online portal is useless to me.

Hi Marakas,
According to your description, we need to verify if you want to update the value of LookImageURL to ‘smart-1.jpg’ with two single quotes or not. If you just want to get the smart-1.jpg without any quote, you can refer to the following T-SQL statement.
update SuperFashionDB.Looks
set LookImageURL='smart-1.jpg' where id ='25D25926-2B5C-40F6-8944-F0B32822E7C0'
---the result as follows.
id URL
25D25926-2B5C-40F6-8944-F0B32822E7C0 smart-2.jpg
If you just want to get the smart-1.jpg with two quotes, you can refer to the following T-SQL statement.
update SuperFashionDB.Looks
set LookImageURL= '''smart-2.jpg''' where id ='25D25926-2B5C-40F6-8944-F0B32822E7C0'
---the result as follows.
id URL
25D25926-2B5C-40F6-8944-F0B32822E7C0 'smart-2.jpg'
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Similar Messages

IPhone 4 (iOS 7.1.1) not recognized by iTunes 11.1.5 on Mac OSX Mavericks. Frustration Station.

iPhone 4 (iOS 7.1.1) not recognized by iTunes 11.1.5 on Mac OSX Mavericks. Have tried all of the recommendations on the apple support site, I am running all current up to date versions of iTunes(11.1.5), Mac OSX(Mavericks), AND iOS 7.1.1 on my iPhone 4 and nothing has worked. Also tried doing some recommendation of deleting some ".plist" files in the preferences as I had seen on this support forum and my iPhone is still not recognized in iTunes at all. I plug my iPhone into my MacBook Pro and it makes the sound like it's connected and charging, but when I go "devices" in iTunes, it is all greyed out. I have had this iPhone since May 2011 and have synced it to this computer numerous times since then, with the last time being before I updated to Mavericks which was sometime in April. Not sure where to go from here, I've tried to delete iTunes and re-install, but when I try to drag the iTunes icon from "applcations", the system tells me I cannot do so as it is required by OSX. So, what gives?

durrrrr. nevermind. re-installed itunes and it looks good for now.

Syntax highlighting not working on PL/SQL developer tool

Hello,
Syntax highlighting is not working on PL/SQL developer tool using the beautifier. When I go set Syntax highlighting parameters (from EDIT>PL/SQL Developer Beautifier Options > User Interface> Editor> Syntax Highlighting ) and click apply, the changes are not reflected in SQL code in the SQL window. Other feautures in the beautifier such as Fonts, Window types are working fine.
Please help me with this issue.
Thanks!!
Shreejit

As this is not an Oracle related question (let alone Oracle SQL or PL/SQL), and as you've been given a link to the relevant website... I'll now lock this thread.

Problem sequencing SQL Management Tools 2014

Hi
I'm using APPV5.0 SP2 to sequence SQL Management Tools 2014. Unfortunately when running the APPV package on the client, I get the following error:
Invalid license data. Reinstall is required
This seems a known issue (even with SQL MGMNT tools 2012). After some searching, I found out that it's related to a Visual Studio 2010 bug. A hotfix has been released (KB2526163) but won't install so this doesn't solve the issue.
Has anyone managed to sequence either SQL Management Tools 2012 or 2014?
thanks for your help
Gert

We used the SQL Server 2014 Management Studio sources, not the full SQL Server binaries. Like Rory did in his recipe.
Product Name: SQL Server 2014 Management Studio (x64) - (English)
Filename: en_sql_server_2014_management_studio_x64_exe_3941421.exe
Downloaded from the MSDN Subscriptions
website.

IPhone 4s Not Recognized in iTunes 10.6.1 Running Mac 10.6.8

I purchased 10.6.3 and since upgraded to 10.6.8. Now my iPhone 4s is not recognized in iTunes (10.6.1). I did all the suggested troubleshooting. I rebooted and unplugged - replugged everything and still nothing. My phone IS recognized in iPhoto though, for what it's worth. Someone please tell me there's a fix for this. Thanks.

See http://support.apple.com/kb/TS1591. Also, you may need to remove and reinstall the Apple Mobile Device Service as outlined here: http://support.apple.com/kb/ht1747.

Adobe Edge Animate Cloud installation not recognized by Adobe Application Manager

I installed Adobe Edge Animate with a direct download from the website. In order to have it be recognized by Adobe Application Manager, I trashed the App and downloaded it again through the Adobe Application Manager and installed it. After restarting the computer, the Adobe Application Manager still does not recognize the app and it is listed as "Install" Please advice as how to make Adobe Application Manager recognize Adobe Edge Animate so it is listed a "Up to date"?

Stefan,
I don't think your problem has anything to do with you downloading Edge Animate directly from the website. I setup all Creative Cloud programs through Adobe Application Manager on a clean-installed Mac. Everything looked good for a few months but now Edge Animate and Touch Plug-in Apps always show as "Install" in Application Manager. I installed both like 3 times using the application manager (even though I already had them installed) and that made no difference either. I think problem lies in the application manager. Maybe some Application Manager update that was supposed to fix another issue caused this bug. I'm hoping Adobe is aware of this and working on a fix. While it's purely a cosmetic problem, it's quite annoying to see apps already installed showing up as not installed.

My new HTC TB is not recognized by my VZAccess manager. What do I do?

I tethered my TB to my laptop to connect to the internet and it isn't recognized my my VZAccess Manager. I have the data plan for this and I put the phone in "Internet Connection Mode" but it still is not recognized. Am I supposed to download a new VZAccess Manager for the Thunderbolt? The version I have now worked fine with my LG Voyager for 3 years.
Right now I am connecting to my laptop using my Mobile Hotspot but I don't know if this is part of my business data plan(the $60/mo option) or not. I live out in the middle of nowhere California and do not have access to broadband, so this is my only form of connecting to the internet.

Well I found out why I couldn't connect to my VZAccess manager. It's because I was using the version for the 4G air card. According to the Verizon technician I spoke to, they haven't supported the TB with a VZAccess download yet, but they SHOULD have one up before the free wi-fi hotspot expires on 5/15.
The problem is, I am having trouble connecting with the hotspot, for instance it took me 60 seconds just to get to this page and I download stuff at 5-10kps a second while with my LG Voyager tethered I would download stuff at 20-80kps and 150+ when I was in LA or the Inland Empire. Even the phone browser keeps saying "Connection Failed" when surfing the web and the phone shows 2-3 bars. These are problems I never had with my Voyager and I know it's not my laptop since it connects fine with a hotspot from an AT&T phone, at Starbucks and the truck stop.
The technician I spoke with advised returning the phone until Verizon supports it with a VZAcces version for it. The thing is, will they waive the $35 restocking fee if I go back to my old phone and will I lose my upgrade for a future purchase? And if they do charge me the $35 restocking fee what will happen if I dispute the charge with my credit card company?

MY DVD Drive is not recognized by the Device Manager

Hi,
I own a Presario 6608AU version notebook.
The prob is since i removed Windows Vista from my notebook and install WIN XP my DVD drive is not working. Neither is it recognized by the Device manager too.
I have tried for all solutions available on net.
Should i install any drivers for the same. please help me

I am also having problems I have a brand new HP G71-34OUS Notebook with Windows 7 I can't use CD's or DVD's the computer is not reading them. I need to know where to find the drivers to download please help me with this

2nd HDD not recognized in Win7 Disk Manager, Shows in Device Manager, BIOS, Win7 Repair CD

Hello,
I am trying to add a newly purchased HDD to my laptop as the secondary HDD. The primary is a 160 GB SSD.
Primary SSD: Intel 160 GB SSD model SSDSA2BW160G3H
Secondary HDD: WD 750 GB 7200 RPM SATA/300, Model WDBLHJ7500ANC-NRSN
Laptop: HP Pavilion dv7t-7000 Quad 17.3" laptop
Laptop Config: Intel i7-3720QM 2.6 GHz Quad Core, 8 GB RAM, nVidia GT650M, 160 GB SSD
Laptop BIOS: F.24
Laptop Date of Birth: 5/24/2012
OS: Win 7 Prof x64
Shows up in BIOS (can run diagnostics OK).
Shows up in Win 7 Prof Device Manager.
Does NOT show up in Disk Manager.
Checked device drivers for Win7 Prof Device Manager HDD, have the latest.
Checked service manual, can't see anything that I missed.
Booted with Active@BootDisk (Win PE rescue disk), drive showed up as uninitialized.
Initialized drive, partitioned (one large), formatted NTFS.
Booted with Win 7 Repair Disk (Win PE), can see the drive in command prompt, able to write a text file to it OK.
Still won't show up in Win 7 Prof in Disk Manager.
Any ideas? Maybe a firmware upgrade for the laptop? Some kind of incompatibility with the HDD and SDD such as different dirve modes (don't believe that Win7 has issues with IDE versus AHCI devices)?
I had trouble adding a 2nd HDD to my dv7-6000 laptop; it finally just showed up months later. Is this common with HP laptops?
I am stumped and any help is appreciated. I checked the Internets and didn't see anything other than HW issues. I need this to work for the new semester that started today.

More testing:
WD Data Lifeguard (Western Digital's HDD diagnostics) also won't see the HDD after booting with Win 7 Prof off of the SSD.
Moved the HDD cable from the 2nd HDD to the primary header (SSD disconnected). Was able to install another instance of Win7 on the 2nd HDD OK; this proves that the new WD HDD and the secondary cable are OK. Moved the cable back to the 2nd header (still no SSD) and the computer booted off of the secondary HDD connected to the secondary header OK.
Added the SSD back to the primary header and booted into the instance of Win7 off of the SSD. Disk Management can't see the 2nd HDD, WD Data Lifeguard can't see the 2nd HDD; however, Device Manager is able to see the 2nd HDD OK.
Ran Intel SSD toolbox on SSD; no issues. Ran WD Align by Acronis on SSD (checks for advanced format alignment of 4K boundaries); it's already aligned to 4k boundaries.
Connected HDD to pri header, booted Win7 Ultimate on HDD. Ran WD Data Lifeguard on HDD; it's fine. Booted into WD Align by Acronis CD, ran WD align against HDD; it's already aligned to 4k boundaries.
Put HDD on pri header, SSD on secondary header and booted into Win7 Ultimate on HDD. Able to see both drives in Dask Management.
Put SSD back onto primary header, HDD back onto 2nd header, booted into Win7 Prof on SSD. Disk Management can't see the HDD again...
Updated laptop BIOS from F.24 to F.2D rev A (Install Shield Wizard confirms that it is for Win7 x64 as well as Win 8.1). Didn't fix the issue...
Ran Intel Driver Update Utility. I have the Intel RST (Rapid Store Technology) driver v 11.0.0.1032. Did not state that I needed to upgrade this driver. This is latest version on the HP website.
Everything works except having the SSD connected to the primary header, having the HDD connected to the secondary header, booting into Win7 Prof on the SSD and trying to see the HDD in Disk Management. Unfortunately, this is the configuration that I need to work.
Any thoughts on what is causing this? Hardware issue with HP Laptop? Power supply issue? Bad HDD controller? Bad install of Win7 Prof on SSD (appears to run fine otherwise).

Non-dialogue characters, in Action, not recognized, especially when syncing to Schedule

Hello Staff and Community,
I really do like many of the automation features of Story. The one concern I have is about Syncing the script to the Schedule. Were I to have a scene that only includes Actions with the mention of a character (or two, or three), when syncing with a schedule, it doesn't show up as having characters in that specific scene. This is a real and true headache for those producers who need to know which characters appear in each scene, precisely the thing for which a schedule is desired.
Yes, you do have the option of choosing to deselect a scene, or in a more advanced setting, deciding not to update the Characters, but wouldn't an option whereby you can LOCK the scene from syncing be more beneficial?
And in order to do that, each scene would need to be identified with an ID (not Scene Number), since adding additional scenes in a revision would then KNOCK OUT the Scene Number and screw everything up again.
This item was addressed in 2010 and I could find no more information on it via searches. If there is currently a way to do what I am speaking of, please let me know. Otherwise, this should be a pretty high priority on the Story team, since it affects every, single user of the program somewhere along the lines. A LOCK feature would be the best option and should, I would think, be rather easy to implement.
Thanks for you time and assistance. Have a great holiday!

Here is another thought that might help, and not only for Characters, but for things like Props and so forth...
Similar to Background Color (the tool that will highlight the background color to whatever you would like), why not be able to make addendums that the software will recognize as being Character, Prop, Extras, Special FX, etc., easily identified by the specific color, like RED for a non-dialog Action character, or GREEN for a Prop. (Or better yet, make it all user-definable!) So, instead of locking the scene, it would only be something seen inside Story that could be moved around (if another scene is written before it, thus changing the Scene Number), and then syncing would be able to notice this addendum and add it (correctly) to the schedule.
So basically the user would be highlighting the important parts of their script. Important enough to be translated to the schedule, that is.

IPod not recognized by Windows, previously updated once on Mac

I've had this 30gb iPod for about a week, and have only been able to update it once.
I updated it on my sister's iBook for convinence, and when I tried to update it on my Compaq Presario, it didn't recognize it and will only charge after I have reset it.
I have tried the Rs many times, installed the iPod updater (which does not recognize when the iPod is plugged in, so I can't even erase the memory), installed all of the necessary software and all of my USB ports are 2.0.
I have no idea what to do now that I have seemingly tried everything. Please help me!
compaq presario Windows XP

I have the exact same problem I called Apple tech support they didn't really tell me anything that isn't already on the support site. Then they did tell me to go to an apple store and try it on one of their computer and they will probably give me a new ipod but i still think it won't work on my computer.
I had my ipod hooked up to my brothers xp machine, usb 1.1 which he uses for his nano and everything worked fine. I think it has to do with something with the usb drivers. When i plug in the ipod in device manager its says Unkown device under usb controllers. I tried updating these drivers and nothing worked. I even had my brother give me the drivers off his maching which were for the usbstor.sys and usbstor.inf files which are for the usb mass storage devices which his nano shows up as.
If anyone figured this out please help me before i have to driver to the apple store this weekend.
windows Windows XP Pro SP2, usb2

Iphone 4 is not recognized as a device by itunes on mac

itunes does not recognize my iphone 4 as a device. I’ve seen this problem resolved for pc users, but I have a mac book. When I have new photos, the mac recognizes the camera. Without new photos, the mac does not recognize when I plug in the phone at all. Any help is appreciated.

Try downloading iTunes and re-install it over the existing. No need to delete iTunes first.

Oracle 8i - PL/SQL sub query not working in PROC, but works ins SQL

I have read about certain things not working in 8i and I think this is one of them, but I was wondering if anyone had a work around. In the place of the SELECT SYSDATE FROM DUAL, I have a table look up, where I am going to look up the OCN of the corresponding VENDOR_ID ( a column in the original query ). I am doing it in a decode statement because if the first condition in the decode statement is met, that's it. But if not, it needs to look up the OCN number in this other table. Simple enough, conceptually. I thought of a view but that necessitates a SELECT statement, too. Anyway, here is the code with the appropriate text bolded:
CREATE OR REPLACE PROCEDURE tstINS_RATE_ROUTE_RECORDS_PROC (GET_CUR_PERIOD IN DATE) IS
     CUR_PERIOD DATE;
     BEGIN
     CUR_PERIOD := GET_CUR_PERIOD;
     Insert into RATE_ROUTE (
       CVBI_KEY
     , VENDOR_ID
     , OCN
     , ST_CD
     , PERIOD
     , MDFY_DT )
     Select
       C.CVBI_KEY
     , C.VENDOR_ID
     <b>, decode( c.send_lca, 'YES', 'XXX', (SELECT SYSDATE FROM DUAL) )</b>
     , decode( c.send_lca, 'YES', 'XX', SUBSTR(C.ZLOC,5,2) )
     , CUR_PERIOD
     , TO_CHAR(SYSDATE)
     FROM
       rpt_ds1_cnt_cat c
     , cogs_resource cr
     , cogs_t1activity ct1
     , rpt_ds1_aloc_zloc_reverse_vw az
     where (C.CVBI_KEY = CR.CVBI_KEY (+)
     and CR.PERIOD = CUR_PERIOD)
     AND (C.CVBI_KEY = CT1.CVBI_KEY (+)
     and CT1.PERIOD = CUR_PERIOD)
     and (az.master_route_name=c.aloc||'-'||c.zloc OR az.reversed=c.aloc||'-'||c.zloc)
     END; -- INS_RATE_ROUTE_RECORDS_PROC

have read about certain things not working in 8i and I think this is one of them,Yes as I said scalar sub-queries were also not recognized within PL/SQL in 8i.
Re: PLS-00103: Encountered the symbol "SELECT" when expecting one of the fo
I was wondering if anyone had a work around.Write a function that returns the value. You may incur a performance penalty from a context switch to PL/SQL, but it may be balanced by the decode optimization you are attempting.

My 120GB IPod classic is not recognized by my Windows 7 PC. When I plug the ipod into my computer I receive a message saying that the USD device is not recognized.

My 120GB IPod classic is not recognized by my Windows 7 PC. When I plug the ipod into my computer I receive a message saying that the USD device is not recognized. The Device Manager lists it as an Unknown Device. I've tried uninstalling iTunes and reinstalling it, but it had no affect. The odd thing is that our other iPod (160 GB Classic) is recognized on the same computer using the same USB cable. When I plug the ipod in question into another PC, the PC seems to recognize the iPod and lists it in Windows Explorer (iTunes is not installed on this machine). There seems to be something out of wack with this PC/iPod combo. Any thoughts on what I can do to try to resolve this issue? I tried all of the steps listed here, but they didn't help me. http://support.apple.com/kb/TS1538
Any help would be greatly appreciated.

Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

IMac G5 Internal Hard Drive Not Recognized

I shut down my iMac G5 with the power button and not through the typical shutdown procedure once and then when it booted up it would not get past the gray screen. I eventually used the Leopard DVD to try to boot it and was able to get to disk utility to look at the drive. I tried to repair the drive but then the machine froze and I had to restart once more. Now the internal hard drive isn't recognized or seen at all. I actually switched out the SATA hard drive with another spare I had and that was not recognized either. I can get the mac to recognize the installation DVD still so I know my computer still functions properly but I just need it to recognize the drive now. Does anyone have any ideas how to resolve this?

Have you access to DiskWarrior or TechToolPro? Either of those might fix your problem otherwise, try booting from the Apple Hardware Test on your install disc and see what it says.

Characters in query not recognized in silverlight SQL management tool - firefox & mac

Similar Messages

Maybe you are looking for