Charging 60GB 5G iPod with third party USB chargers

I have a 60GB 5G iPod which charges fine from my PC and an old wall charger that came with my original 1G iPod. However, it will not charge from either a USB wall charger (Swisstravel) or a 12V car USB charger - both of which charge other USB devices (including other iPods...) fine.
Has anyone else had this problem? Any solution?
Thanks
Nick
60GB 5G iPod   Windows XP  

This has been happening to me over this month and I eventually ended up buying a new wall charger. I think that the chargers wear down after so much use.
kEat0n

Similar Messages

  • MacBook Pro with Third Party USB External Modem ? Drivers? Network Pane?

    I bought my brother a MacBook Pro last month, and he is using it fine in Pakistan with my Airport base station and cable internet access. Problem is when he is on the road, and using GPRS with his Sony Ericsson P900/910 is terribly expensive there. So, I have to send him an Apple USB modem (that I am yet to hear good things about). However, he does have an external third party USB modem that works fine with PC laptops. Are there any generic drivers for USB modems built into OS X in MacBooks? How would he go about using the external USB modem in Network control panel and using a generic driver?
    Is there a way to use Parallels (that he has) to connect to Internet from the Windoze USB modem and have MacOS X use the Windows connection as the "router"? Thanks.
    Imran

    No answer received. Closing to reduce clutter.

  • Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

  • New classic with third part USB pci card

    Hi,
    Just got a new 120gb classic for my son. But it does not
    seem to work with his computer. He has an old g4 tower, with
    third part usb 2 card. That worked fine with his 30gb video,
    but the new 120gb classic is not even recognised by the system.
    It is recognised by my g5, and my older 160gb classic is recognised
    by his g4.
    My guess is that the current generation of ipod classics
    is not compatible with the third party pci usb card. Aarg.
    Does anybody know of a cheap usb 2 pci card that will work
    with both a g4 and a new "classic" ipod?
    Any other thoughts?
    Thanks
    David

    I reset parameter ram, updated all the software, and it seems to work fine now.

  • Where can i buy a new charger for my ipod with click wheel,the old had burnt.tnk.i need it urgent.

    Where can i buy a new charger for my ipod with click wheel,the old had burnt.tnk.i need it urgent.tnk

    By "charger," do you mean a USB power adapter that plugs into the wall outlet (used to "charge" the iPod), or are you asking about the USB docking cable that connect the iPod to the computer?

  • How to use third party usb 485 interface

    I have a third party usb-485 interface that we frequently use within our company and want to be able to use Labview to create a program to talk to our systems. The interface is a kk systems usb-rs485 isolated converter which I have been able to recognise in MAX explorer after using the NI VISA driver wizard but I am unsure how to now use it for 485 comms within Labview. I don't seem to be able to detect it with the VISA configure serial port vi. I have used the NI usb-485 interface before and found this quite easy to set up but am not sure how to use this third party interface. I have attatched screen shots of the MAX window to show what it is seeing. Any help would be greatly appriciated.
    Attachments:
    MAX usb 485 screen shot.PNG ‏102 KB
    MAX usb 485 screen shot2.PNG ‏120 KB

    I have undone everything as recommended and the comm port does appear in the devices tree but when I try to use the device I don't seem to be able to get any response even though I can select the port as the VISA device name in my vi. I am pretty sure I have the baud rate etc.set the same as when we use the interface in other software,is there something else I need to do? I am using the rs485 example in labview as my code which works with the ni-usb485 we have. 

  • Third party USB cable detected by IOS 7 update

    Yesterday I had a working Ipad2 and foolishly I allowed it to update itself. Big mistake!
    After all sorts of hangs, reboots etc I got it working again and then watched the battery drain before my eyes. Charged it overnight and after 12 hours it was at 75% and just about holding at that level. I have a third party USB cable and I borrowed my daughters OEM cable. When I plugged that in I could immediately see that it was charging normally BUT it also immediately disabled rotation and it is now stuck in landscape mode. I've tried switching the lock button to "Lock Rotation" and I see the icon on screen changing from locked to unlocked but it will not rotate. WHAT THE..............
    Detecting that I am using a cable purchased from another source and deliberately disabling my property without my authority borders on the criminal.
    Apple need to get it sorted.

    I'm sure Apple would love for you (and everyone else) to use their cables...that's a given. But I seriously doubt that any kind of intentional "crippling" would be done to anyone's unit in some way because they used a third-party cable. Seems like the way it's setup now, if a third-party cable is detected, you'll get an on-screen message that the cable is detected as such and you may have issues when using it.
    Try the cable again and if it faults the rotation function in the same way, then you can decide if you want to continue using the cable if it is indeed causing this same fault consistently. Otherwise, it could have just been a coincidence.

  • Really Apple? OSX 10.8.5 disables built-in camera functionality with third party apps such as Skype and Gmail video chat. I do not have time machine on my 2013 MB Air. How can I get back to 10.8.4?

    Really Apple?
    With the release OSX 10.8.5 Apple has once again showed its true colors, and continued its efforts to create a closed Apple system, which eliminates third party vendors, unless, one can only assume... they pay.
    Included in this OSX update is the disabling of the built-in camera to work with third party applications such as Skype and Gmail video chat. No surprise the camera works just fine with Apple apps such as Facetime and Photobooth.
    The answer I got on my call to AppleCare to ask for assistance in reinstalling 10.8.4, so that I may Skype again, was we can not do that. You can not go back unless you have a time machine bkup.
    Can anyone help me get back to to 10.8.4 on my 2013 MB Air?
    I do not have a time machine bkup as this computer is not used to store important documents.
    Thank you.

    Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
    Another: isight not recognized in Skype after 10.8.5 upgrade
    Don't panic. Skype simply needs to update its app.

  • How to integrate single sign on with third party system

    we are in the process of implementing istore application. we already have home grown isupport application to contact support personnal for any issues. Now we are wondering how do we integrate oracle applications single sign on with our third pary system. Is there any recommendation provided by oracle to achieve the same.

    We too are in the process of implementing iStore with SSO features.
    And if you believe me it seems to me as nightmare.
    In our scenerio we are intgrating this SSO with Third party access control too (AD and Siteminder). I would request you to please respond me on the following mail id , so we can share our experince which will help us in our implementation
    [email protected]
    regards and thanks in advance
    Vikas Deep

  • SharePoint 2013 on-premises integration with third party email account

    the Email sending issue from SharePoint is causing too much time waste 
    First let me explain how our SharePoint is deployed
    Sharepoint version : 2013
    Deployment type : on-premise
    Authentication : from Domain controller also hosted locally 
    domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
    SharePoint computer name on local DNS :  sharepoint.domain.com
    OS and IIS : 2008 r2 , IIS 7.5 
    Network firewall : 25 26 ports  opened for sharepoint , both incoming and outgoing.
    Server firewall : turned off
    Email configuration Attempts by IIS 6.0 
    We tried following setting on IIS 6.0 SMTP local server properties
    In General tab
    qualified name was shown as : sharepoint.dts-solution.com
    IP assigned : sharepoint server IP  , advanced putted two entries of IP with ports as 25,26
    In Access tab
    Authentication : selected as Anonymous 
    Connection : All except below list : empty list
    Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
    in Delivery tab
    outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working 
    outbound connection: all default values and port = 25
    Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked 
    On sharepoint central management settings
    Outbound email = sharepoint.domain.com
    from and reply to address = [email protected] 
    IIS 7.5 SMTP settings 
    In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port  .
    Godaddy account 
    Our website hosted on godaddy with same name as domain.com
    open relay not possible on emails.
    Results
    After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
    success. 
    Tech Learner

    Hi,
    As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
    From SharePoint side, I'd suggest you refer to the link below to configure email integration:
    http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
    If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
    I'd recommend you contact their support engineer for more assistance:
    https://support.godaddy.com/help/category/154/email
    https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
    Thanks for the understanding.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Integration of ChaRM with third party tools

    Hi all,
    We are in the process of building the solution for Change Request Management implementation integrated with third party tool. 
    As the normal process for ChaRM is to work with the Service Desk functionality (to raise a ticket, then support message, change request, change document etc...), but what we need is create the change request, and change document directly with ChaRM without using the Service Desk functionality. 
    Did anybody come across this situation?
    Please share your experience. 
    Thanks in advance.
    Balaji

    Hi Balaji,
    there is no problem, as I understand, you want to use ChaRM without Service Desk. OK, than you create directly a Change Request in CRMD_ORDER, the transaction type you have to select is SDCR (standard transaction type), you have to approve it and then you can create a change document, it is not necessary that you start with a Service Desk ticket like SLFN.
    You need configured TMS a SolMan Project with a Maintenance Cycle, thats it (but this is enough , don't forget the customizing).
    I hope I understood you correct
    Udo

  • Conflict with Third Party Apps?

    I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

    Hi Midlake,
    Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
    O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
    regards, Erik.

  • How to integrate DRM with third party tool for loading metadata in SQL table

    Experts,
    I am new to DRM and I have a requirement in which we want to integrate DRM with third party tool(lets say SQL table) as target and load metadata from DRM (Parent node, name , alias etc) to SQL table (same column name)
    Is there any way we can integrate DRM to export the same to table directly instead to files. If yes what are the steps we have to follow.
    Is there anyway we can customize DRM to execute queries or run batch
    Can I have a basic example please.
    Thanks in advance,
    Regards,

    1. Use DRM Export to Table option, for that create an External Connection first for the Target Database and select the respective Tables to which you wish to Export the Hierarchy information.
    2. You can perform most of the DRM Actions via the DRM_BATCH_CLIENT.exe.
        Please refer to Using the Data Relationship Management Batch Client of DRM User guide.
    let me know if you have any issues.

  • Third-Party USB to Ethernet Adapter not working since 10.8 updated

    Hi I have a third-party USB to Ethernet adapter. Since the update of mountain lion the adapter does not work.
    Is there a driver or something I can do to make it work?
    Thanks

    USB not so good, this very good.
    Thunderbolt to Gigabit Ethernet Adapter

  • How to integrate iReceivables with third party payment system?

    Hi,
    My requirement is to integrate iReceivables with third party payment system.
    Can anyone guide me to achieve this.
    Thanks & Regards,
    Sunita

    Hello Prasad,
    <b>Connection with an External Payroll System</b>
    Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
    If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
    For more information regarding outsourcing, refer to the SAP Library, Human Resources  -> PY Payroll  -> PY-US United States Payroll or PY-CA Canada Payroll  -> Outsourcing.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
    Import Payroll Results from a Third-Party System
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
    regards
    Prasad
    Message was edited by:
            prasad chintala

Maybe you are looking for