Charging : haven't used my ipad for over 6 months and when I plug it to charge (wall charger) it just doesn't : any idea as to what the issue is and what I should do?
Hello
I haven't used my ipad for over 6 months and when I plug it to charge (wall charger) it just doesn't charge anymore : any idea as to what the issue is and what I should do?
If the battery has been drained completely dry it will take 20 minutes or more for it to indicate that it is actully charging!
Similar Messages
-
I'm able to plug it into my ps3 and the computer and it works, but when I plug it into the wall charger it doesn't work. I charged it with my wall charger all day but as soon as I connected it to my cable box it it only works with USB ports now. help me
I used it earlier that day. And I have an hd tv with USB port and it won't charge on that as well it. It works for my friends ipod tho and my charger does too
-
I haven't used my ipad for several weeks and now I can't do anything on it, it seems to be locked and I cannot unlock it. The screen just seems to be frozen with the following message 'This ipad hasn't been backed up in 2 weeks. Backups happen when this ipad is plugged in, locked, and connected to WiFi'. Help please!
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
The "edit in" menu is completely inactive. All plug-ins are visible but in light grey; i.e. not accessible. Any idea how to solve the issue? Fyi: I am using LR 5.7.1 on MacBook with Mawericks.
Jim, that sounds like a good hypothesis. Yes, I am using smart previews. I have my originals on an external drive which is connected. Still, LR can not find them. Do you know how to tell LR where to find the originals? I would like LR to identify the source automatically: if external drive is connected LR should show "original and smart preview" not only "smart preview". Thanks for your help.
-
My iPhone 4 (GSM) will not charge when I plug it first, I have to unplug it and when I plug it again, then it charges... It is very weird... Has this happened to anyone?
Thank you in advance for the answer.It is yet happening to me. In my case it happens when I plug it to any kind of charger: socket, car... I have to pull it out the phone and plug it in again so it reacts and starts charging.
Of course, I tried cleaning with a soft, dry brush. This had no effect.
Thanks again and best regards. -
When I plug my iPod Touch 4g into my computer I get a pop-up that says "This iPod cannot be used because the Apple Mobile Device service is not started." And when I plug in my iTouch the name of the iTouch does not come up on my iTunes. How do I start the Apple Mobile Device? How do I fix this?
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
my iphone 5 died and when i went to plug it in to charge the apple sign came up and it wont go away it has been stuck for 2 hours. i cant turn it off because my lockbutton is broke. what do i do?
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. Get your lock button fixed then you can restore your phone.
-
My iphone died & I plugged it back in to charge when it powered on the screen remained black. I can hear when I receive a text and siri. I have tried holding down the sleep and home button and restoring in itunes neither worked. The screen on the phone is cracked but has been working fine until now. Please help!!!
Here's how to perform the restore:
HT1414
If you can actually get to restore, maybe (I estimate a 0.01% chance) you'll be able to do a backup before the restore. Actually, from the symptoms you describe, I suspect a restore won't work either and you'll need to do a recovery.
Just in case, if you need to recover (restore fails), here's how. Note you may have to try to get into recovery mode more than once.
http://support.apple.com/kb/HT1808 -
M
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then try restoring the iPod.
- If still problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
help
This means the iphone is disabled due to too many incorrect Passcode entries.
You our only option is to restore the device. Please note you will loose ALL info currently on the device.
To restore open iTunes on your computer. Plug your cable into the computer but not the phone. Now power down the iphone. once completely shut down, press and HOLD the home button and plug the cable into the phone and continue holding the home button until the itunes logo appears on the phone.
ITunes es will see the device in recovery mode and ask you to restore.
CLick restore and your good to go. -
Hi there, ok so my ipad has been either turning off or just locking itself for sometime now but last night it turned itself off and when i tried to turn it back on it just came up with a blank screen with the back light. When i put it on the charger the sound of it charging happenes but nothing else. I hav tried resetting it but as i am not very savvy with all this stuff i thought i would get some advise before doing anything else. it anyone can help me that would be fantasic
thank youIf a reset doesn't work, try and force iPad into Recovery Mode:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens. PLEASE HELP
I have a similar (if not the exact same) problem! Here are some more details if they are helpful.
My iPhone 4 died earlier today and will not turn back on. It seemed that the battery died while it was not in use. I attempted to charge it on one charging cord in multiple wall outlets and none worked. Assuming it was a malfunction in the cord, I took my phone home to try charging it there.
Again, I attempted charging it in multiple outlets with a different cord than previously used. None of these seemed to work, though they would flash the Connect to Power screen for a brief moment before returning to a black screen. I assumed that my phone was simply so depleted of battery that it needed a long charge.
I charged it for 30+ minutes without any success, then attempted to charge it through my MacBook instead of through a wall outlet. iTunes did not even recognize that my phone plugged in (and still hasn't). I've attempted charging it for an extended period of time (1+ hour) with no luck. Sometimes when I press the Power button it will flash the Connect to Power screen once more before returning to black.
The Apple logo never appears, nor does any apparent progress on charging. I have attempted holding down the Power and Home buttons simultaneously for 10 - 30 second increments. Still no luck. There is no reason anything should be happening with this phone that I can identify.
I have no warranty and just recently replaced my previous phone which had had similar problems before completely crashing. This is a phone new to me that was previously used but in almost new conditions and factory reset by Apple prior to my purchase.
Does this mean that my phone battery is dead?
Is there anything else I can do?? -
My iPhone 4 won't turn on unless I plug it in to a charger it says the battery is 100% and that I need to conect to iTunes when I plug it in to my computer it just comes up with a flashing apple logo :(
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
hello, my ipad mini doent work i charged it till the next day and it didn't work i charged it again till the next day and it didn't work what should i do i didn't use my ipad for three days please i need help????
Didn't work in what way. Are you unable to start it up? Does it start but then freezes? Does the screen stay black when you turn it on?
Try this - press the home and power buttons and keep pressing them until the apple logo appears. -
I haven't used my iPad 1 for months and now am trying to charge it, but it doesn't seem to be charging. Is the battery no longer good because it hasn't been used for so long?
I just ran into this. You have to make sure you're using an iPad charger (the bricklet is larger) in a wall outlet. Leave it alone for several hours, then do the reset while it's still plugged in (hold down the home button along with the sleep/wake button until you see the apple, then let go). It should make a comeback.
Maybe you are looking for
-
Apex Listener vs. Oracle Application Server... advantages?
Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications? We have an existing application server instance in production. Would introducing Apex Listener and the extra overhe
-
I have a MAC version 10.6.8, and I can't find icloud on the system preferences
-
Report to understand exact status of FG
Dear Experts, One question is going i my mind but still i have not found the solution. And it would be thankful to you if you clear my following doubts. I run the MRP and see the results in Md04 or md05, then i go to order report to know the exact st
-
I FIND YOUR FLASH FORMAT EXTREMELY USER-UNFRIENDLY. I spent two weeks to figure out how to save a complete .swf file to my local drive. Finding 48 files behind a main html doc hosting those .swf's took 48 hours. (Now I can't move my arm anymore due t
-
Photo Gallery - Load Detail Image
How can I load a different image other than the first one listed in the XML file? Example, let's say I have 20 photos in my XML file. The first detail image (large) to load is the first one in the list, how can I show the 15th one in the list when th