Charging with the protective case

I charged my ipad with its case and left it until morning.Do you think any damage to happen its battery?

Shouldn't. I leave mine in the case all the time.

Similar Messages

  • My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

    My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

    Yes, I've been using it for months. And I can charge other devices with it. (my iPhone) but something weird just happened..... I kept on pluging it in the iPod and sometimes it would start to chàrge then sometimes it won't charge. Charges every time with the iPhone though.

  • Ipad 4 not charging with the ORIGINAL Power adapter that came in the box. Can't charge my iPad. I plugged in on PC all night and has been charged to 7%

    Yesterday, as usual was going to charge my iPad, it was at 1%. Well, I took my ipad charger (original Apple official, I want to clarify that as a first step, I'm using the brand products than Apple) and plugged into an outlet ... The ipad began loading the first two minutes , then I got a notification telling me that the iPad could not charge with the charger.
    I was quite surprised by the announcement. I disconnected and reconnected it .... again, I received the same notification. Then I disconnected and tried it on another outlet ... anything, yet. then I tried it on another outlet and ipad started charging. but after a while I had the same notice, not paying attention to that. I left it charging and I removed roughly 25% that of fear for something to happen. also remembered that situation (made 2-3 months ago where the iPad was not charging but after waiting a while disconnected, reconnected it and loaded normally).
    so I decided to wait to re-connect the iPad to the outlet. This time, I plugged it into the outlet (fully discharged) at night and expected to find it loaded in the morning. But my surprise is that it still is off, it did not load anything.
    I Bought the iPad in December 2012. Do you think that my iPad is hurt?
    What can I do? Ay recommendation?
    Please, HELP ME!

    Try giving your iPad a reset. Hold down the sleep and home keys until you see the silver apple. Let it reboot and try again.  You may also want to swap out the cable, just to confirm or rule out that it's bad.
    If none of those fixes work, make the appointment at your apple store and have them check it out.

  • If i cange my single app team subscription to complete app Team would i be charged with the cancellation fee

    If i cange my single app team subscription to complete app Team would i be charged with the cancellation fee.

    You need to contact Adobe support contact our support team directly.& get the assistance for this.
    Regards
    Rajshree

  • Inconsisten with the protected source The system cannot find the path specified (0x80070003)

    Hi,
    we are getting an error with the DPM server, the disk is on the same server, other disk have no issues
    The replica of Volume H:\ on backup.domain.eu is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points, but
    new recovery points cannot be created until the replica is consistent. 
    DPM encountered an error while performing an operation for \\?\Volume{5d0ecad1-5d88-47eb-8a5c-13dddaf0d41e}\app\invoice\ on backup.domain.eu (ID 2033 Details: The system cannot find the path specified (0x80070003))
    we did a consistency check twice and a disk scan, even deleted the backup and recreated it

    Hi,
    From the following article, you can first try a consistent checking:
    Replica inconsistent
    https://technet.microsoft.com/en-us/library/bb809059.aspx
    To perform a consistency check
    In DPM Administrator Console, click Protection on the navigation bar.
    In the Display pane, select the protection group member for which you want to perform a consistency check.
    In the Actions pane, click Perform consistency check.
    In the dialog that notifies you that a consistency check is a lengthy operation, click OK.
    If it failed, please try to manually synchronize a replica as referred in this article:
    How to Synchronize a Replica
    https://technet.microsoft.com/en-us/library/bb795867.aspx
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I am a student and would like to take part of student edition. I'm graduating in June, I will be charged with the full amount of time or for student price for 12 months?

    I am a student and would like to take part of student edition. I'm graduating in June, I will be charged with the full amount of time or for student price for 12 months?

    Carine17088327 which Student and Teacher edition are you referring to?  This forum is primarily regarding perpetual version of Adobe Creative software which included a discount for education users.

  • DPM failed to communicate with the protection agent on DPM 2010 SERVER because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)

    Hi everyone,
    Backup jobs for protected members are intermittently failing with the following error on the DPM server:
    DPM failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
    Why does the DPM server failing to see it's own DPM agent cause the backup job for another server to fail? One day a backup will work fine, the next it may fail; and the next back to normal again...
    The following error is recorded in the Service Control Manager event log on the DPM server just prior to the above error:
    A timeout was reached (30000 milliseconds) while waiting for the DPMRA service to connect.
    Thank you.
    With regards,
    Rob

    Hello,
    I have read these entire postings and see that my problems match most of the above problems. 
    I believe we have tried all of the ideas in this blog and lots of other ideas from other forums and internet searches.
    We have about 80 small databases protected and set at 15 minute incremental and most will work but some fail.  When they fail the most common, but not only error, is something like "DPM
    failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)". The alert is inactivated in the DPM Console, and the backups resume as normal."
    Since later jobs are successful I thought all was well.  All was well until I went to restore from incremental backups.  We worked for two days (day and night work) to restore
    from a corrupted virtual disk on our SQL Server 2008 R2.  I suspect DPM had something to do with the corrupted virtual disk.  All I know is that we never had this problem until installing DPM.  Here is what we encountered when we went to restore
    from the protection points: 
    *  Restore jobs take a minimum of 15 minutes for jobs that are 45 MB or 2 GB. 
    *  If you pick a backup from the list of recovery points that is not valid the job runs for 15 minutes and then "Failed". 
    *  You cannot rerun the job because SQL Server 2008 has the table being recovered as <tablename> (recovering) and a retry will not work.  Of course time is wasted while waiting
    to see if it worked.
    * Eventually you realize that even after dropping the table in the (recovering) mode in SQL that the restore point must be bad or possibly one of this failed recovery points.
    * So begins the quest to start restoring recovery points one by one and 15 minutes by 15 minutes until you find one that actually restores to a SQL Instance.
    *  If you have 80 of these to do and you average trying three recovery points and each takes 15 minutes, not to mention the time to drop the table in SQL, well that time adds up to 3,600
    minutes of trial and error.  60 hours of trial and error, wow not much of a savings using DPM over a SQL backup plan.
    * And then you have to explain to your customers that their databases were restored but you do not know at what point the DB was restored. 
    All in all it seems like DPM concept is great but like many backups the backup plan looks good on paper but actually restoring a backup is quite a different matter.
    I don't know if anyone has ever solved the problems presented in this forum but if they have then I wish they would post and if no one has solved the problem then shame on DPM.
    Good luck everyone, but I for one have spent about two months on trying to protect and restore consistently.  I have never had one day of consistent and reliable restore points.  I
    am going back to sql management plans for my backups.  I have never, in 10 years had a sql generated backup fail me.  Never.
    gbl

  • TA26689 can ipod classic be charged with the iPhone's or iPad's charger?

    Can iPod classic be charged with the iPhone's or iPad's charger?

    There shouldn't be any issue using one of those chargers.  When I need to charge something, I just connect to any 30-pin connector/charger that's closest.
    BW

  • My iPad will not charge with the charger or plugged into my laptop

    I Have an iPad Air that will not charge with the charger plugged into a socket or the MacBook?

    Hi Joanefrommaldon,
    If the battery on your iPad is not charging, then I'd like you to please follow the steps in the article below.
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • Will using the original ipad (1) charger with the new ipad (3) hurt the new ipad?

    will using the original ipad (1) charger with the new ipad (3) hurt the new ipad? I accidentally did this for a minute and then unplugged it and plugged in the new charger to it.did I hurt the new ipad?

    No. It's the same charger.

  • My 3 month old iPad is suddenly not charging with the adapter

    Hi, this feels like a dumb question but when i plug my iPad into the 10W adapter directly into a wall outlet, the message 'not charging' appears next to the battery percentage. What am I doing wrong? It's charged with the adapter before but now all i get is that message. thanks for any help you can provide! Jeannie

    Thanks everyone! I decided to leave it plugged in and it seems to be charging but it still says 'not charging' in the top right corner next to the battery percentage. It seems to be charging slower than usual though. It was at 44% around 10am and at 2 pm it's at 66%. I don't see the lightning bolt through the battery icon like I normally would. what would cause that? I really appreciate all of your help! Jeannie

  • Car charger that works with the bumper case?

    Does anyone know which, if any, brands of car chargers and models that work with the new bumper case? I went to best buy yesterday and they all looked too thick to even buy it and give it a try.

    I'm pretty sure the lack of functionality with car chargers and the bumper case is simply because the cutouts for the USB connector on the bumper is too small..that's the only reason. Otherwise it will work; it's simply a physical problem with the connector not seating properly; that's it.
    I'm saying this based on my own situation. I have a Griffin car charger /FM receiver that worked with my iPhone 3G and it worked with my iPhone 4 until I put the bumper case on.
    The situation is the same situation as to why the Apple supplied USB cable that shipped with the 3G does not work with the iPhone 4 w/bumper. Apple redesigned the size of the USB connector and sized the cutout on the bumper for their new smaller size making the bumper not backwards compatible with existing devices with the older size USB connectors. The size differential is not that big but it's big enough to cause problems.

  • Does the new 4th gen ipod touch come with a protective case?

    Also, does it include any other accessories, like a screen protector?

    No, it does not come with a case or a screen protector. Not from Apple, anyway. There may be a store somewhere that is offering them as a combo...you know...buy an iPod Touch and we'll throw in this screen protector and a case for free. Or for some price. In fact, I have been searching the web for a case for my iPod Touch 4th generation. There are many, many cases and things for the first, second and third generation iPod Touchs, but nothing for the 4th generation. It is too new. Not Apple's fault. It only came out a few weeks ago. Companies will be selling cases for them soon, I'm sure. I purchased a case for the iPhone 4th generation. The two 4th generation units (iPod Touch and iPhone) are very, very close in size. The only difference is the height. I can tell you that the case does not quite fit. The iPod Touch slides a bit inside the case. Depending on what kind of case you want to buy, it might not matter.
    As for the protective screens, yes they are for sale for the 4th generation iPod Touch. Do a search on the web (Google, Bing, Yahoo, whatever) and you will find them. I purchased some from Amazon.com. They have not come yet. In fact, I just received notification that they were shipped today. But these protective screens are just for the 4th generation iPod Touch--they have holes where the camera and the power button are. I can't tell you how good they are yet. They were 3 for about ten dollars. I could have purchased less screens, but the price per screen was higher, obviously.
    Good luck, have fun and enjoy your 4th generation iPod Touch!
    Tim

  • Are any iphone 5 fm radio docking stations that let you leave the protective case on phone

    Are any I phone 5 fm radio docking stations available that I can leave my protective case on phone while charging

    Hey braswell4AU: I have a similar issue. I purchased 2 iPhone 5's the first day they came out. Black 64gb for myself and white 32gb for my wife. She is having somewhat the same issues as you have. Wifi is weak and keeps dropping the signal, and also her phone almost never has LTE. And we are in a very strong Verizon LTE area in north Los Angeles county. My phone has never had any signal issues, wifi or LTE. I have been researching the issue to no avail. I though maybe the white with the brushed alluminum may cause signal issues, but haven't found anything on that and posts about the black one haven't problems blew that theory up.
        I have also changed the SIM card and the phone itself and still the same problem. I saw a post about someone getting their phone swapped out and the apple rep told him not to restore the phone, but to just set it up as new. I have yet to try it, gonna try this weekend.. But it makes sense! I, like you have 6 apple devices (2 iPhone 5's, 2 iPhone 4's apple tv3, and the ipad3) and have no issues running all my devices via router.
         So I am thinking about the history of the restores and backups and my wife is the only one that went from the 4 to the 5.. Every other device was setup as new. So my theory is that he iphone 5 has issues when you restore from previous backups.. Maybe something a little different from the backups of the previous models create issues in the iPhone 5's?
         Like I said, I'm going to give it a shot this weekend and see what happens. If you get a chance to try this before, please let me know if it works and if I try before you I will update you.
        Good luck and hopefully we can get these wonderful phones working like they should!
      Nate

  • Creative Zen Vision M no longer charges with the wall char

    I have had a zen vision M for about 5 months and have never had a problem with it til now. I was listening to it this morning and realised it needed charging so i plugged in the charger as well and all was fine. It seemed to charge for awhile and then it stopped and the charge went backwards. Now every time i plug in the wall charger (that came with the player when i bought it in July 2006) it just shows as being on AC power unless i hold it in a specific position. I have it plugged into my computer at the moment and it seems to be charging. the blue light is on and the battery is showing as charging.How do i know if its a problem with my charger or not - i tried my PSP charger as i had seen that in some posts on here and the same thing happened. I think its something internal. I don't want to send it anywhere as of course its out of warranty and i don't want to pay for anything.Anyone have any ideas. I read something about firmware fixing battery charging ability but then it wipes out FM recording - not that i use it that much but i still use it.Anyway im wondering if anyone has any ideas or if anyone else has had the same problem. I searched high and low but i could only find people with charging problems when they first bought the units.Any help would be appreciated as i like to listen to it at work and my work computer won't accept my player as im not an administrator so i can't install it etc. I need to be able to charge it either at home or at work so i can listen to it. Thanks for your time in advance, i really hope someone can help me as i love this groovy player and i just lectured my sister the other day on how much better than an ipod it is and now it goes and does this. Thanks again

    It seems to have fully charged. I left it on while i went out and it now says it has full battery although it still seems to be charging. Does that mean there could be a problem with the AC charger slot on the adapter? Is there any way to buy a new adapter? if that seems to be the problem. If i upgrade to the latest firmware can i go back to the original if necessary?

Maybe you are looking for