CHARM Actions- set to in development

Dear All,
In CHARM SDHF transaction(UC) is in created status.
Now when I click on actions it should show me only 'Set to In Development' & 'Withdraw correction', but it shows other actions like 'logon to system', 'Confirm correction', 'complete correction' & 'Go to task plan', Which are required at later stage.
How can I hide these unusable actions at this scenario, because developer will do 'set to in Developement' first, then remaining things will come.
Edited by: PK on Mar 12, 2010 8:36 AM
Edited by: PK on Mar 12, 2010 8:36 AM
Edited by: PK on Mar 12, 2010 8:37 AM

Hi,
you have to define in which status an action can be executed.
Start transaction SPPFCADM, mark CRM_ORDER and click button "Condition Configuration".
There you have to select your action profile and check the values in tab "Schedule Condition" for every action.
It there is no entry, the action will be shown in every status.
You can define your own condition using container value "&CRM Service Process.User Status&".
Hope this helps,
Christoph

Similar Messages

  • ChaRM: Normal Change - Not possible to set "Successfully Tested" unless the Maint. Cycle is set to "In Development with Release"

    Hello,
    I'm doing some tests with ChaRM, Normal Change scenario.
    As far as I know, the following steps would be the correct sequence (concerning development and test phases only):
    1) Developers perform the correction in DEV and release their TASKS of the transport request
    2) Developer Lead set the Normal Change document status to "to be tested"
    3) In background, a Transport of Copies is created with all data previously stored in the original transport request. Then this ToC is transported into QAS
    4) Change Manager set the Maintenance Cycle status to "Test"
    5) Tester performs the test into QAS
    6) Tester provides a valuable feedback and set Normal Change document status to "tested successfully"
    According to the following SAP Portal article, it seems to be correct:
    http://help.sap.com/saphelp_sm71_sp10/helpdata/en/48/db938dceba518de10000000a42189c/frameset.htm
    During my tests, however, I have noticed that it is just possible to go from step 5 to 6 if the Maintenance Cycle status is set to "In Development with Release" (go a step back in the Cycle). Otherwise, I get the following error messages:
    Warning Message Details Status was reset by system
    Warning Message Details Action RELEASE_ALL cannot be performed during this maintenance phase
    Warning Message Next status cannot be set because some actions cannot be executed.
    Once I have done the Cycle status change, then it is possible to move from 5 to 6 without errors and then the original transport request is transported into QAS too.
    Question: Is this the correct behavior or am I missing customizing?
    Thanks in advance for your help.
    Daniel

    Hello Vivek,
    Thanks for your reply.
    It is kinda weird the steps sequence, since the Tester needs to tell the Change Manager to move the cycle's status before approving the correction done in QAS (successfully tested).
    Perhaps a new action between "to be tested" and "successfully tested" could exist, in order to request the CM to perform the cycle update.
    But OK, that's how it is.
    Regards,
    Daniel

  • ChaRM actions reset for developer

    Hi I am configuring ChaRM workflow.
    For the devloper I have not done any changes in the actions, whereas whenever I 'create transport request' through developer's actions after that the available actions are again back to the old one i.e. 'Set to in development' and 'Cancel Procedure'.
    Any pointer to the possible problem.
    Regards,
    Smita

    Hi Smita,
    did you look to the following note :
    Note 919477 - Normal correction reset to status "created"
    Is it the same problem ?
    Regards,
    Stéphane.

  • Why  "set to 'in development'" does not show up?

    I have configured CHARM.
    However, the action list for developer is empty.
    Could you tell me how to make the "set to 'in development'" show up in the action list?
    Thanks a lot!

    Hi,
    Check if all BC sets are activated without any error and in correct sequence.
    Regards,
    Shyam

  • What role for "set to 'in development'"

    In CRM_DNO_MONITOR, in the action list, I do not see the item called
    "set to 'in development'"
    What I have are "recheck correction" and "withdraw correction".
    Maybe it is a missing role?
    Please help. Thanks a lot!

    Thanks!
    Yes, there is an error:
    No processing is planned for this message
    Message no. CRM_MESSAGES011
    Diagnosis
    You want to postprocess an error message, which is not maintained for postprocessing.
    This could be because there is a follow-up error, which automatically disappears when the other errors for the document are removed.
    The long text for the error message possibly contains more information. You can look at this, by pressing the help icon in the message line.
    But how to fix it?
    Please help. Thanks!

  • Run with owner permissions is not found in Action set, state machine etc

    Hi, I cannot find the "Run with owner permissions " when configuring an Action set in the common attribute in Nintex 2010 work flow.  Could you please let me know why , and if possible how to activate this.Thanks.

    Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.  This is only one forum among the many
    that are on the TechNet Discussion Forums, and given your post, you likely chose the wrong forum.  This is a standard response I’ve written up in advance to help many people (thousands, really.) who post their question in this forum in error, but please
    don’t ignore it.  The links I share below I’ve collected to help you get right where you need to go with your issue.
    For technical issues with Microsoft products that you would run into as an
    end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
    http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an
    IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
    http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more
    detail about your problem, that could include screenshots of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
    If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you!  It’s called the Where is the forum for…?
    forum and it’s here: http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Moving to off topic. 
    Thanks
    MSDN and TechNet Subscriptions Support
    Did Microsoft call you out of the blue about your computer?
    No, they didn't.

  • How to delete all Action Sets in the Actions Palette

    I'm in need of a piece of JavaScript code that will delete all the Action Sets in the Actions Palette. I've scripted the logic to load the appropriate Action Set once needed but I don't want to end up with duplicates at the end of processing the batch.
    Any help would be most appreciated.
    TIA, Scott

    > Could someone clue me in; I'm lost?
    getActionSets = function() {
    var i = 1;
    var sets = [];
    while (true) {
    var ref = new ActionReference();
    ref.putIndex(cTID("ASet"), i);
    var desc;
    var lvl = $.level;
    $.level = 0;
    try {
    desc = executeActionGet(ref);
    } catch (e) {
    break; // all done
    } finally {
    $.level = lvl;
    if (desc.hasKey(cTID("Nm "))) {
    var set = {};
    set.index = i;
    set.name = desc.getString(cTID("Nm "));
    set.toString = function() { return this.name; };
    set.count = desc.getInteger(cTID("NmbC"));
    set.actions = [];
    for (var j = 1; j <= set.count; j++) {
    var ref = new ActionReference();
    ref.putIndex(cTID('Actn'), j);
    ref.putIndex(cTID('ASet'), set.index);
    var adesc = executeActionGet(ref);
    var actName = adesc.getString(cTID('Nm '));
    set.actions.push(actName);
    sets.push(set);
    i++;
    return sets;

  • ISupplier - Setting up the Development Environment with JDeveloper 9.0.3

    Hi friends,
    Can you please tell me the steps involved in setting up the development environment for iSupplier Module with JDeveloper in my PC.
    Please give me the details about what are the files to be downloaded from Apps, folder structure for development environment etc...
    Gurus please reply ASAP.
    Thanks,
    San

    You should better pick the class files from the JAVA_TOP appropraite to that product and add it to either myclasses in your project in jdev or add it to the classpath.
    Once you have these required files then you can launch the pages by either using a test.jsp or use the xml files directly if you know what parameters to pass. I would suggest you to use a test.jsp and launch the first page in the flow which launches from the menu - function by picking it's web_html_call.

  • How do you create action sets in PSE9?

    I'm trying to figure out how to create my own automated action sets in PSE9. When I go into the Action Player section in the right hand panel, there is a "Tip" that states the following:
    "Tip: Photoshop Elements includes some action sets for you. You may also add your own actions. Please consult the Help file for information on creating and adding your own action sets."
    I cannot find any reference in the Help files for how to do this. Can anyone help with this?
    Thanks in advance, Jay

    Read this in the pse 9 help manual:
    http://help.adobe.com/en_US/photoshopelements/using/WS39F39829-C3F4-4c75-BD7C-8D155CC40C5F _WIN.html
    We'd all like to be able to record actions and such in elements. If you want someone
    from adobe to see your request/complaint, use this form and they will read it:
    (the more people complain about or request a feature, the more likely it might be implemented)
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=72
    MTSTUNER

  • Default Action/Effect in an Action Set in PSE5

    I have a Photoshop action set that contains a "main" action that performs some functionality and calls a bunch of "sub" actions. The main action is listed first in the set and is automatically picked up as the default action and executes successfully when installed into PSE6, PSE7 & PSE8 and also works as expected in a German version of PSE5 but in an English version of PSE5, somehow the second action (ie a "sub" action) is being executed rather than the first. Is there any way of configuring the default action or forcing PSE5 to recognize the first action as the action to run? If not, does anyone know what algorithm PSE uses to determine the action to run? The action being run isn't first (or last) alphabetically nor positioned first (or last) in the action set. Any thoughts/assistance would be greatly appreciated. Thanks.

    Thanks for the response. I think I confused things by bringing up the German version... The action was created in a standard English version of PS CS2 then adjusted and resaved in a standard English version of PS7. It was then packaged and tested in English (and non-English) versions of CS3, CS4, CS5, PSE6, PSE7 & PSE8 without any issues. It was also tested in a German version of PSE5 and worked without any concerns but when tested in 2 different standard English versions of PSE5, it appears that the second action in the action set is the one that is being recognized and run, rather than the first action in the set. The first action is named as "Make Patterned Papers" and the other 20 or so actions are named as "code -- (reference number)" in a lame attempt to slightly obscure the functionality from the PS users. The first "code -- (reference number)" action listed after the "Make Patterned Papers" is the one that is being picked up by PSE5 as the action to run. The actions are not listed in alpha/numeric order and the action that is being picked up by PSE5 is not the first alphabetically either. I tried copying all of the actions to a new action set and using this instead, but had the same result.

  • Setting Up Shared Development Environment

    Is there any diagrams, white papers, guides or best practices on setting up the J-Developer and connecting to shared Services and database? The Developer guide (E10148.pdf) does not really cover what the standards is or the overall infrastructure of the JDeveloper and setting up a Shared Developer enviroment.
    I looking for something like http://docs.oracle.com/cd/E25178_01/fusionapps.1111/e15524/gs_install_e.htm but for (11.1.1.6.0) version webcenter.
    I basically looking for something to help me get our Shared Development Environment setup with Jdeveloper.

    The issue is connecting the Jdeveloper to the WebCenter DS and Activity DS schemas. In the Development guide it says I need to connect to these schemas to be able to utilize several of the WebCenter Services, ( http://docs.oracle.com/cd/E21764_01/webcenter.1111/e10148/jpsdg_svc_intro.htm#BHCDJHAI - 7.2.2 Setting Up a Database Connection
    We are trying to set up the connection to our shared development environment database. Our database group is concerned with giving developers access to these schemas. They are concerned that JDeveloper will changes or modify the schema and cause the database to fail. They created a account with read only access but we are not sure it this will work.
    I been trying to find anything in the documentation to find what access JDeveloper needs to the WebCenter DS and Activity DS schemas and if JDeveloper can modify these schema in any way.
    Additionally try to find anything on the best practices on connecting to a shared database and setting up a Development environment and its connection to Jdeveloper .

  • LighterRoom to Photoshop for Action set, need to export?

    Hello,
    I edit my photos in Lightroom 2.0 and use Photoshop CS3 to run a self made action set to batch resize, set color profile, and add trasparent watermark.
    Do I need to export all my photos from Lightroom then run Photoshop to batch process all the exported images. I don't like exporting my photos twice, this is why I ask...
    Thank you
    ken

    That sounds like exactly what I need, I've tried it but the droplet itself crashes every time. Both when an image is dragged/dropped onto the icon in explorer and when used as a post processing option in LightRoom. The image does not even open, Windows just brings up a 'Photoshop droplet has stopped working' message.
    How odd...

  • Action Set renamed - Now actions won't run

    I had a set of actions named "Kevin's Actions" to "Kevin's Actions CS5" (I have both CS5 and CS3 installed.
    However, when I tried to run actions that had references to an action entitled "Kevin's Actions" it wouldn't run. Seeing the problem I tried simply dropped the CS5 and renamed the action set BACK to the original "Kevin's Actions".
    THE PROBLEM: The actions still won't run.
    Is there a way to get them running again? I really don't wan to have to re-creating them ....????
    Thank,
    Kevin

    Hi guys,
    Below are screen shots of the first action in the set,  the First action it calls out and the error message I am receive. I checked spelling, spacing and capitalization and it all seems clean to me???? You'll probably have to enlarge these to see properly:

  • Illustrator CS4 does not save an action set

    In Illustrator CS4, english, under Windows XP SP3, english, I created a new action set and wrote some actions. It works. Later, I selected in the Actions menu the command Save Atctions... It opened a system' Save window, let me choose a folder and press OK, but does not do anymore else: without any word, it doesn not save a file. It does not hang, let me select folders, edit name... It seems, what Illustrator forgets about action.
    How to nuge Illustrator CS4 to finish saving actions?

    sana,
    You may try to Move the folder.
    Just deleing it may not be enough.
    If that does not help, a reinstallation of Adobe Acrobat/Reader may.

  • Can't load PS CS3 Mac action set on PC running PS CS3 for Windows

    Are action script sets compatible across platforms?  Shouldn't I be able to load a CS3 action set created on a Mac on a Windows machine running CS3?  When I try, I get this message:
    "Could not load the actions because the file is not compatible with this version of Photoshop"
    What's the deal?

    I've never seen this error and I've been working on both platforms for years.
    The only time I would expect to see this kind of error message is if you recorded an action in one version of PS and tried to load it in an earlier version.
    The only serious compatibility problem I've run into is with paths (Mac vs XP) or when trying to read actions from PS6.
    -X

Maybe you are looking for