Chart color highlight wont recognize decimals

Hello all
I am trying to have a chart change it colours based upon percentages as below
If greater than 95% green
Between 85% and 95% yellow
and less than 85% red.
I try to enter the value into the color highlight tab in Chart Expert as follows.
If greater than 0.95 green
Between 0.85 and 0.95 yellow
and less than 0.85 red.
Crytal Reports though will not accept the decimals and imediately changes the number to 95, and 85.
Is this a physical limitation or is there a fiz to this?
Thanks
Phillip

Similar Messages

PIE Chart Color Highlight - setting colors

Hi
PIE Chart showing default colors even after setting the diffent colors to OIE chart slices from Color Highlight tab.
PIE chart is showing only one slice when I select Data for the PIE Char is "For all records".
Could you please let me know how to set the different colors for slices?
Thank you

hi,
As you are selecting 'Color Highlight' for different Pie Slices, "For all records" option shouldn't be selected.
It should be "On Change of".
Then obviously you will see the colors specified in 'Color Hghlight' tab.
Regards,
Vamsee

How can you make the Chart "Color Highlights" Item Condition val a variable

Hi,
I have a report with a chart on it.
The chart has on Item Condition on it to change the color of each bar to red if the value is under a certain value.
This value needs to be passed in as a parameter to the report.
The condition looks like this
if Avg PerformancePercent < 90 then bar color = red
The 90 in this condition needs to be set from a parameter P_PerformancePercent_Threshold.
I am producing the report in Visual Studio 2005 using CrystalReportViewer to display the report.
Since the value field seems to only take in numeric values I have assumed there is no way to use a parameter something like.
So I am looking at doing this through code.
The object model for the ChartObject does not have many properties/methods on it.
Is there any other way to achieve this?
Thanks, George

Functionality using the Crystal Reports SDK in Visual Studio .NET is limited to the appearance of the chart in the viewer such as height and width. See the following for more details;
[ChartOject Members described|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_net_doc/doc/crsdk_net_doc/html/crlrfCrystalDecisionsCrystalReportsEngineChartObject_MembersTopic.htm].
[ChartObject Properties described|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_net_doc/doc/crsdk_net_doc/html/crlrfCrystalDecisionsCrystalReportsEngineChartObject_PropertiesTopic.htm].
99% of this time, if you can not do something at design time, you will not be able to do it at runtime either. See [this|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Color Highlights not working in bar chart with two data points

Iu2019m using Crystal Reports 2011. I have created a bar graph using two data fields in the Chart Expert. I have set the colors for the bars in the Color Highlights tab, but the colors that I have defined have not been applied to the graph.
I have tried changing the colors numerous times and have done it in both design and preview modes. It seems to be somethign with having two data points because I don't have this problem when using just one data point. Please help!

is the colour mode Color by group or color by series

Color Highlights does not work for chart

When I set the color coding in the chart, it works fine if I run the crystal report on the same DB that I use to design the report.
Problem occurs if I run the report on another DB. Color Highlights does not work in that case.
I am using JRC to run the reports.
Thanks & Regards,
Amrita

Hi Jehanzeb,
In chart expert there is a tab "Color Highlightsu201D. In this tab one can specify the condition based coloring.
In my case I want to show "RED" color for Unauthorized events andu201D GREEN" color for Authorized Events.
While creating a report suppose I am using a database server "DB-A".I set the color highlights in the chart as I explained. Please be noted that when we click on the color highlights tab it asks for the database login.
To view the report we have our own server and we are using JRC APIs.
Hence I map my report with server and try to view the Report. My Server is connected with database "DB-B" which is different from the database I used to create the report.
This time color Highlight I have specified while creating the report does not work.
I have tried using the "Format Series Riser" option. But the problem with this is that, it does not color the chart conditionally.
I mean if I give GREEN for Authorized and RED for Unauthorized. It gives the green color either to Authorized or Unauthorized which so ever occur first in the chart.
For example:-suppose there is no Authorized Event on date 15-Jan-2009 and I select the date range starting from 15-Jan.In this case Unauthorized event is the first to print on the chart hence this event get the green color though I expect this events to be in RED color.
Regards,
Amrita

Windows Wont Recognize

I'm updating my Dads iPod for him and for the first time ever, Windows/iTunes wont recognize it.
On the iPods display screen it says do not dissconnect so its not my USB ports nor the cable. Any ideas?
BTW, this is the iPod Color U2 version thing

This http://www.copytrans.net/helpcopytrans.php#22 is an interesting iPod detection problem check-list.

Crystal Reports - Change Line Chart Color Dynamically

Hello,
I have Crystal report 14.
I'm trying to create a line chart and need to be able to set the colors of the lines at the time the report is run. The colors the lines need to be are specified in a database and a different color could be specified each time the report is run.
Can anybody suggest how I would do this?
Thanks
Edited by: Robert4543 on Nov 16, 2011 5:23 PM

I've tried to use 'Color Highlight' to change the color of the lines, but it only changed the colors of the markers on the line, not the actual line itself. Is there a way to get it to change the color of the line?
I may have one line I need to display as 1 color, and a 2nd that I need to display as another. Using color highlight changed the markers for both lines to the same color. Is there a way to specify which line I want to change the color of in "Color Highlight"?
Thanks.
Edited by: Robert4543 on Nov 16, 2011 8:41 PM

Pie Chart Color Scheme

Post Author: Janice
CA Forum: Charts and Graphs
I have a report written in Crystal Reports XI that has a pie chart in the Report Header displaying counts of activity by "reason code" for a selected time period. The users have noticed that, when they run the report for different time periods, the same "reason" has a different color on each report. It seems that the default is to sequence colors based on volume (size of 'pie wedge').
They would like to have the colors appear linked to Reason Code rather than to volume. Is there a way to change the pie chart color scheme so that it is coded by "description" not by "count"?

hi,
As you are selecting 'Color Highlight' for different Pie Slices, "For all records" option shouldn't be selected.
It should be "On Change of".
Then obviously you will see the colors specified in 'Color Hghlight' tab.
Regards,
Vamsee

3D bar chart, color by height of bar

I would like to create a 3D bar chart where the color of the bar depends on the height of the bar. Has anybody done this with CR?Bob.

Not sure about previous versions, but in CR XI you can set conditional colours for your graph. Go to Chart Expert->Color Highlight and make the color conditional on the value of whatever your y-axis is.

Chart colors

Post Author: vitalya
CA Forum: Charts and Graphs
Hello all,
I use Crystal Reports XI. I have report with chart. Chart type is Bar. With Chart expert i defined colors for each type of data in the chart. When i preview my report chart colors looks fine. But if i use created rpt file in web application and generate html report chart uses different colors. What a problem?

Post Author: quincarroll
CA Forum: Charts and Graphs
HiI am having a very similar problem...I have a pie chart that is displaying 8 values for scores that make up the total score. If I preview the chart in Crystal XI, I get the correct colours for each slice of the pie, but when I save the rpt and run it from my VS2005 App, the first 4 colours on the pie revert back to the default 4 colours and the last 4 colours stay the same as what I set using the "Color Highlight" tab in the design env.Can anyone please help?

Imac wont recognize printers

ever since i installed lion my mac wont recognize my epson printer or my hp printer. no printing from ipad either.

You probably won't get any help unless you are more descriptive. At a bare minimum we need to know what version of Lion is installed on the iMac (10.7.2 is current), exactly what printers you have and exactly how they are connected to your computer. Also please check http://support.apple.com/kb/HT3669 to see if your model printers are supported. The first thing I'd do though is System Preference - Print & Scan - highlight the first printer in the box on the left and right click it and choose Reset Printing System. It will look similar to:

Trying to update my iphone 5s but my itunes wont recognize my device and my home screen is stuck telling me to connect to itunes. HELP!!!

Clicked on the new iphone update on my phone since i finally have time to update it, and my phone turned off and now its stuck telling me to connect to itunes. ive had it connected to itunes yet it wont recognize my device. WHAT DO I DO?!

This article explains what to do if your phone is disabled. Follow the steps carefully.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

My home button is broken ipod touch 5th generation and wont open and itunes wont recognize it

my home button is broken ipod touch 5th generation and wont open and itunes wont recognize it

Turn on without Home/Power Button

My macbook pro retina wont recognize my external hard drive

my macbook pro retina wont recognize my external hard drive.
i opned the hard drive in the past on my computer and used it alot.
one time when i took it out i forgot to eject it, and since then when ever i conect it it would never show up on my computer or ever recognize the device.
please help me!

For starters try a PRAM reset.
DALE

I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?

I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?

Thanks Gary, but no, that does not work. First of all, I can't select each bar individually. When I click on one bar, all three bars are selected.
When I use "inspector > graphic" I have 5 fill options: none, color, gradient, image, tinted image. The default selection for the theme I'm using is image. What I would like to use for my charts is the same image that this theme uses for table headers. It has the same texture as the chart, but a different colour. Using anything but image or tinted image removes the texture from the fill.
I have found I can do one of two things. I can select tinted image from the fill selections in "inspector > graphic" or I can select 2D Image Fills from "inspector > chart > chart colors". The first choice does not allow me to match the table header colour because it only allows me to apply a tint to the existing colour and adjust its opacity. The existing colour has too much influence on the fill, so I can't find an RGB adjustment that will match the table header colour. The image selections from "inspector > chart > chart colors" do not quite match the colour or the texture. Again, I can try to tint the image, but I still can't get it to match and the texture is not the same anyway.
The image I want to use obviously exists in the software as it is an attribute of the theme, but for some reason is inaccessible. The other angle I have tried is to edit the theme, but I can't figure out how to do that either.

Chart color highlight wont recognize decimals

Similar Messages

Maybe you are looking for