Chart Components : Option to select a item for drill down by Label name

Hi
Currently for all Chart components in Xcelsius in Drill down mode we do not have the option to insert the X Axis Label values by selecting the Label on the X- Axis. It is made mandatory that we should click on any of the Series and that too we get only Position or Value but not Label.
Why should some one necessarily click on a particular series to drill down. Why cant he drill down by just clicking on x axis label. This seems to be a general requirement but I did not find this option. Am I missing something?
I want to check whether if we will do have the option to select the label name by just clicking on the X-axis labels.
Please note: I know the other alternatives of getting the label by enabling a series and inserting the position and using some label based menu to derive the Label.
Regards
Gangadhar

hi
then do like this
dont use drill down option for that.
take push buttons and one combo box.
place those pushbuttons into X-Axis Labels and transparent them.
combobox is used for dynamic Data Retrival.
in ComboBox Component behavior properties you have option Selected Item(Type and Item) in that item should be map to Pushbutton Destination cell.
you will get data as per your Requirement(Like you can drill down from X-axis Labels).
Regards
Prasad

Similar Messages

Reorder key columns in "Use for Drill down" option

I have Product Detail as the leaf hierarchy level which has Product Id and Product Name are both selected as Logical Key.
When I drill down to this level in Answers, I see both Product Id and Product Name as expected. However I see Product Name as first column followed by Product Key.
Is there a way to change this default behaviour and make Product Key column as first column followed by Product Name?

Hi Prassu,
I had done that and it did not help. I marked the ProductKey&Name column as Primary Key in both the Logical table as well as Dimension Hierarchy level.
I can drill down from Product Category to Product Type. But Product type does not come up as Hyperlink to be able to drill down to ProductKey&Name.
If I make the Product_Id as the primary key then drill down works fine. But with the derived logical column "ProductKey&Name" it does not work.
Any ideas?

Set headers for drill-down reports.

Hi!!!
The problem we have by now is when printing a report, selected characteristis are showed in header as "multiple values" instead of showing the real values that user have choose.
Does anybody knows how to set headers for drill-down reports in order to see selected characteristics?
Thanks in advance...
Adela Cambiasso.

Sorry, me again...
I have found yet they way to show in the header the report parameters, I mean, the selection criterias that user used when execute the report... I was able to show selected characteristics inside de report but not the selection criteria...
Do you know what I have lost? or what to use for this?
Thanks again.
Adela.

KCA0 - Convert Aspect for drill-down report in ECC6

Hello experts,
Do you know the steps to convert an aspect (for drill-down reports) from 3.0 to ECC6? And how to add it to the list in transaction KCR0 (Execute Drill-down report). SAP has mentioned transaction KCA0 for doing a conversion after the upgrade but I am not familiar with this transaction. Please help!
Thanks and Best regards,
Chuong

Hi,
You can use all the statements in HR also.
For getting the AB values,there are macros and function modules available.
Macros:
rp-imp-c2-b2.
You need to pass b2 key values before calling macro.For eg,
MOVE pernr-pernr TO b2-key-pernr.(since u r using LDB)
MOVE year         TO b2-key-pabrj. (year you need to pass)
MOVE period       TO b2-key-pabrp. (month)
MOVE '1'          TO b2-key-cltyp.
have a look at these Function Modules also.
HR_WORK_SCHEDULE_TIMES
HR_TIME_RESULTS_GET
HR_TIME_RESULTS_IN_INTERVAL
HR_WORK_SCHEDULE_TIMES
Reward points if helpful.
Regards,
Manoj.

INVALID_VARIABLE_VALUES error for drill down/up

Hello ,
I have created a VC model corresponding to a BI query. The query has 3 variables of which one is mandatory the value for which i am hardcoding.In the output table we have a heirarchy variable for
which I wish to use the drill up and drill down features.But after applying these features, and running
the application ,on clicking the drill down/up buttons i get the following error
Nested Exception. Failure to execute native function. Nested Exception. INVALID_VARIABLE_VALUES
The variable format seems to be fine as I have tried it from the BI side and it also generates the output in the VC output table.Following is the webapi used for drill down .
'FILTER_IOBJNM=YGL_ACCNT;FILTER_NODE_IOBJNM=0HIER_NODE;FILTER_VALUE='&#ID[ACC40T]@G_L_Account&';FILTER_COLLAPSE= ;FILTER_IOBJNM=YGL_ACCNT;CMD_1=CMD%3DDRILL_TO_LEVEL%26LEVEL%3D2%26IOBJNM%3DYGL_ACCNT%26DATA_PROVIDER%3DDP;'
Any help would be most appreciated.
BI 7.0,VC 7.0
PS: have already gone through the wiki link for this error
Thank You
Rgds

Vineeth,
Please see my comments below:
1)The complete web api command is in the above thread, the mandatory variable is the fiscal year.
I don't see where you have defined the fiscal year in the web API command below:
'FILTER_IOBJNM=YGL_ACCNT;FILTER_NODE_IOBJNM=0HIER_NODE;FILTER_VALUE='&#IDACC40T@G_L_Account&';
FILTER_COLLAPSE= ;FILTER_IOBJNM=YGL_ACCNT;
CMD_1=CMD%3DDRILL_TO_LEVEL%26LEVEL%3D2%26IOBJNM%3DYGL_ACCNT%26DATA_PROVIDER%3DDP;'
2)am not too sure about your question.
Is the hierarchy for YGL_ACCNT defined as a text hierarchy or characteristic hierarchy? If it is a characteristic hierarchy, you should specifiy the parameter FILTER_NODE_IOBJNM=YGL_ACCNT instead of FILTER_NODE_IOBJNM=0HIER_NODE.
3)the command is as intended as per the sap documentation
If you are following the SAP documentation, the first occurrence of FILTER_IOBJNM=YGL_ACCNT should be removed as it is already defined after the FILTER_COLLAPSE parameter.
Regards,
Mustafa.

HT2480 When I am setting up exchange / outlook mail, I am not getting option to select the folders for syncing, can you please help me to solve this problem

In outlook mail mails are not getting downloaded and option to select the folders to sync is not visible in the exchange setup

See:
* http://www.ehow.com/how_6609141_remove-bearshare-spyware.html
* http://www.fanhow.com/answers/question-77222-how-to-delete-bearshare-search-from-firefox
You can look for a "Mediabar" program under "Control Panel > Programs and features"
See also this forum thread about BearShare:
*[[/questions/792580]]
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

*Can I pass default Selection dynamically for Drill Down Charts*

Hi
I am having Charts with Drill Down tab and I am currently having to select a value for the Default Selection Combo Box while saving the chart.
I want to be able to update this default selection depending upn data coming from the XML / Webservice. Is there a way to update the Default Selection dynamically ?
Please let me know if anyone has come across this.
Thanks,
Rahul
Edited by: Rahul Modey on Sep 2, 2008 5:15 PM

Hi Rahul,
Drill Down > Default Selection > Series/Item may not be filled dynamically. They must be selected manually.
Good Luck.

Select open items for a settlement amount

Hi All,
I have a requirement to do a clearing with situation like this,
upload a excel file contains of settlement amount.
This amount will use to clear up the payment JV save earlier (open items)
for example: settlement 57.00
then the open item documents :
doc 1 > 7.00
doc 2 >20.00
doc 3 >50.00
doc 4 >20.00
doc 5 >17.00
from example above, the settlement can clear with doc1+doc3
or doc2doc4doc5
My program is using the bdc call 'F-03' to do clearing.
how to program the logic if wan scenerio 1 or 2 based on any number of open items sum up is equal to settlement amt.
Any standard FM can use ?
Please help. << Priority removed >>
Thanks
Edited by: Rob Burbank on Sep 14, 2011 1:27 PM

Anything that sounds as if to make your matter look more important than the others, especially texts like "urgent", "at the earliest", "ASAP", will be removed from the posts. Please avoid these in the first place.
Thomas
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]

Transction FBL3 called for item level drill down in GR55

Hi all,
We have a GLT0 Report in Report writer. The system correctly executes the report and displays account balance for the period. The Report calls T-code FBL3 for display of line items(report/report interface). But when we drill down, the line items are not displayed for the specific period or selection and instead displays the line items for the whole period. (upto date).
The report was copied from a different system and in the source system it was displaying the line items correctly.
Could you pl share any inputs for resolving this issue.
Thanks & Regards
Sri.

Hello
please check from which field the amount is pulled out in GLT0 table. If the amount is pulled out form the totals field ...then it might not show you what you wish to see.
Thanks
Sanjeev

Best Practice for drilling down to a group of records

This is one of those questions that should be simple and straightforward. I am just not sure how to implement.
Here is what is working currently:
I have an app that adds, updates, deletes, and plays video clips from a mySQL database, specifically using the "videoclips" table. Each video has a unique ID (videoID). Each video belongs to one of two categories: (videocategory) "Youtube Video", or "Yahoo Video". I also have a table named "video_category" with a primary id of "videocategoryID" I use the "video_category" table for a cfselect form input to populate the "videocategory" field of the "videoclips" table.
This all works nicely, but here is one of my hangups and the first part of my question: I am not sure if I should create and populate a videocategoryID field in the "videoclips" table, and I don't know the best way to setup and match the videocategoryID in the "videocategory"table. My database is currently a "myISAM". Should I be using "innoDB" and foreign keys to match up tables, and will this solve the problem of populating the videocategoryID in two separate tables? Yes I know this seems more SQL related, but please read on.
There are two different directions I am considering and need help implementing:
 1. I would like to know how to select and pass mutiple videos belonging to a specific category and display them on a page named for that category "youtubvideo.cfm", or "yahoovideo.cfm".
or this option:
 2. I would like to add a formfield on the same page as the videos table where I can select the category and post back to the same page with the results, i.e. the specific category videos.
I am generating bean, DAO, and Gateway cfc's from the wizard. Using the gateway method, I am able to display all of the videos, and select a specific video to play. Here are snippets of the page:
videopage.cfm

<cfparam name="url.videoid" default="1">

<cfscript>
 qVideoclips = CreateObject("component", "myvideoapp.Components.VideoclipsGateway").getAllAsQuery();
</cfscript>

<cfscript>
 qVideoCategory=CreateObject("component", "myvideoapp.Components.video_categoryGateway").getAllAsQuery();
</cfscript>

<cfset videoComp=CreateObject("component", "myvideoapp.Components.videoclipsGateway")>
<cfif isdefined("url.videoID")>
<cfset video=videoComp.getById(url.videoID)>
<cfelse> No data matches this query
</cfif>
<body>


<cfoutput query="qVideoclips">
 <tr>
 <td>#qVideoclips.currentrow#</td>
 <td>#qVideoclips.videocategory#</td>
 <td>#qVideoclips.videosubject#</td>
 <td>#qVideoclips.videotitle#</td>
 <td>#qVideoclips.videocomments#</td>
 <td><a href="videopage.cfm?videoID=#qVideoclips.videoID#">Details</a></td>
 </tr>
 </cfoutput>

<fieldset id="cflayoutleft">
 <legend id="cflayoutleftLegend">Categories</legend>
 <cfform>
 
 <label class="top" for="videocategory">Video Category</label>
 <cfselect name="videocategory" id="videocategory" query="qVideoCategory" value="videocategoryname" display="videocategoryname" selected="#video.getvideocategory()#"></cfselect>
 
 
 <cfinput type="hidden" name="videocategoryname" value="#video.getvideocategory()#" validateat="onSubmit">
 
 <div class="submit">
 
 <cfinput type="submit" name="Submit" class="submit" id="Submit" value="Submit">
 
 </cfform>
 </fieldset>

<cfoutput>#video.getvideoembed()#</cfoutput>
Keep in mind, I don't have a category ID yet.
So in summary,
I want to display only the videos from a selected category.
I need to know if I can pass a string, which means I could use one table and pass the categoryname; I just don't know how.
If I can only pass "videocategoryID" I would need to create and populate a field in the "videoclips" table called videocategoryID.
I already have a table called video_category table. How can I incorporate it to get the field populated in the "videoclips" table?
I hope this is clear. Help would be greatly appreciated!
Thanks,
Marty P
MP e-commerce

For example, installation help topics dealing with install/uninstall screenshots for an application's client and server:
client_dir_sum.gif
client_dot_net.gif
client_uninst_wlcm.gif
server_wlcm.gif
server_cfg_tomcat.gif
server_success.gif
server_uninst_wlcm.gif
...or, screenshots dealing with an Accounts window:
acct_groups.gif
acct_lookup.gif
acct_lookup_btn.gif
acct_templates.gif
In other words, use cfg for configuration, dir for directory, btn for button, etc., and use either a function or application window as your lead, allowing you to see all related graphics in sequential order. If you've ever done any manual book indexing, think of this as Index entries/subentries, only the "entry" in file naming is your leading prefix (client_, acct_, etc.), and your subentries are the rest of each file name. Such as:
Accounts
configuring groups
using lookup feature
lookup button
templates
Use the same naming conventions for your topic file names as well; using this method eliminates the need for virtual folders. Many users on this forum use the folder structure, but editing/renaming/adding/deleting folders seems to very often create all sorts of grief. I find this naming structure to be less stressful.
Good luck,
Leon

Suppress zeros for Drill down report

Hi,
I created a query with five structures(A,B,C,D,E) in rows,each structure is restricted with different items.I suppressed the zero valuse in query properties
by Active(All values=0),this will work for individual sets,but how can i suppress the zeros for entire query.
For Example: The user will select particulat set(A) and click Filter and drill down accoring to ->Item,how can i achive this for all sets(A,B,C,D,E) at once.
Thanks,
Bala

Hi,
I created a query with five structures(A,B,C,D,E) in rows,each structure is restricted with different items.I suppressed the zero valuse in query properties
by Active(All values=0),this will work for individual sets,but how can i suppress the zeros for entire query.
For Example: The user will select particulat set(A) and click Filter and drill down accoring to ->Item,how can i achive this for all sets(A,B,C,D,E) at once.
Thanks,
Bala

Javascript Problem for Drill Down Action in SSRS Report when integrated to PPS 2010

Hi all,
I have a SSRS report which is integrated to PPS 2010(Performance Point Services) and it is having a drill down action through Go to URL action(I wrote javascript:void(window.open('xxxxx')) to open drill down report in new window).
This report has 5 parameters and all are multiple valued. Drill down report is opening very well when I open the report form Report Manager for any number of parameters values selected. But when I integrate the same report is PPS and deployed to SharePoint
then it is working only for 23 parameter values selected in PPS filters. If I select more the 23 values in PPS filters then the drilldown report is not opening.
But it is working well in Chrome, I verified in IE and Mozilla, both browsers are having problem.
When I look at Error Console of Mozilla, it is showing a javascript error as "Error: uncaught exception: ReferenceError: window is not defined" but the same report is working well if I select less than 24 filter values.
Please provide me the solution
Thanks in advance

Hi Vasu,
The issue might occur due to the Microsoft security update MS11-100 which limits the maximum number of form keys, files, and JSON members to 1000 in an HTTP request. Here, I suggest that you modify the Web.config file of the SharePoint site as follows:
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
</appSettings>
If the SharePoint site uses the port 80, the web.config file of the SharePoint site is located in the C:\inetpub\wwwroot\wss\VirtualDirectories\80 folder.
Reference:
An ASP.NET request that has lots of form keys, files, or JSON payload members fails with an exception
If the issue persist, please check whether there are any related errors in the Reporting Services log file which is located in <Drive>:\Program Files\Microsoft SQL Server\MSRSXX.<Instance Name>\Reporting Services\LogFiles.
Regards,
Mike Yin
TechNet Community Support

Crystal Help for drill down

I am trying to figure out what I have wrong... The below formula allows me to drill down (little yellow arrow beside my doc type column) and see journal entries, and incoming payments, but I get errors for Credit Memos and Invoices.
Both the Doc Type and Doc # are string fields so it should be working......
So can anyone give me some help as to why it works for two of the four ?
THANKS
Select {Command.Doc Type}
Case "AR Invoice":'http://$b1$/link?table=OINV&key='+ {Command.Doc #}
Case "AR Credit Memo":'http://$b1$/link?table=ORIN&key='+{Command.Doc #}
Case "Incoming Payment":'http://$b1$/link?table=ORCT&key='+{Command.Doc #}
Default: 'http://$b1$/link?table=OJDT&key='+{Command.Doc #}

Hi Dayton
The drilldown needs the docentry rather than docnum so you may need to add this field to your command as an extra field if it is not already there. It does not need to be printed.
Once you gave the docentry set up the formula as
'http://$b1$/link?table=OINV&key=' & totext({Command.DocEntry},0,u201Du201D,u201Du201D)
so that any decimals, separators etc are removed.
Hope this helps
Rob

Error in summation of Actuals for Drill Down Reports(SAP Standard Reports)

While executing the Drill Down report (for e.g S_ALR_87013558) for a particular Project (e.g DWRES-C2005) it is observed that the Actual costs booked on the WBS element (DWRES-C2005-502) does not get rolled up to its higher level WBS Element(DWRES-C2005-501).
This also does not get rolled up to the top WBS element (DWRES-C2005-500).As this is the case the summation for Actuals columns shows incorrect result.Result should have been (Actuals of DWRES-C2005-500 = Actuals of DWRES-C2005-501 + Actuals of DWRES-C2005-502 ).I have also tried the formatting of the Actuals columns in the Form of the report but I could not find any answer.Can anybody help me in this regard.

Sorry, me again...
I have found yet they way to show in the header the report parameters, I mean, the selection criterias that user used when execute the report... I was able to show selected characteristics inside de report but not the selection criteria...
Do you know what I have lost? or what to use for this?
Thanks again.
Adela.

Prompt for drill down result

All,
I have a report like showing ProjectName, ManagerName. When I click any ProjectName it should drill to show the Project name, ManagerName , Project members name and other details . My requirement is provide a prompt for ProjectName and the Project Members Name. I have done to provide a prompt for ProjectName, but i cannot do the same for ProjectMembers prompt in drilldowned page. Can anyone help me on this

Drill-down doesn't work like that, In other words, you can't put a prompt on a drill-down page because the "drilldown" is generated by obi based on the value selected in the parent report and the way the hierarchy was set up in the rpd.
If you really want to have a destination page with prompts for the members, use Navigation from Value Interaction instead of drill. Then you can Navigate to another dashboard that contains both the prompt for the members and the detail report (on the destination page).

Chart Components : Option to select a item for drill down by Label name

Similar Messages

Maybe you are looking for