Chart labelling problem

I'm on v 4.0.n of apex
I'm creating a simple 2d vertical bar chart. When I run it only lables alternate bars e.g
b1 b2 b3 b4 b5
label1 lable3 lable5
I cannot find which xml tag to change so it will label all of them
Ed.

Fixed.
From AnyChart:
When labels are to long to be shown, AnyChart engine hides some of them, to avoid this you should either limit labels width or use rotated or staggered labels, as described in http://www.anychart.com/products/anychart/docs/users-guide/index.html?axes-labels-text-formatting.html
Ed.

Similar Messages

Gantt Chart Related Problem

Project Link:
PPPM
How to solve these problems.
Problem 1:
I have to scroll both the Gantt Chart and Task List scroll
simultaneously. When i scroll Gantt Chart , then at the same time
Task List and vice versa.
Problem 2:
How to stop Gantt Chart header movement stop when scroll the
Gantt Chart.
Problem 3:
In the Gantt Chart Node, there are 2 section. One is dark
section and other is lite section. I have to slide these scctions
like like HDevidedBox effect.
Please help me out from these problems.

Hi Vedant,
values are displayed in pie chart their label is not display.
So you're able to view the value and label information when you hover over a slice i.e. viewing the tooltip, but you can't see the actual label for each slice of the pie. If you're not seeing all of the labels for the slices of the Pie chart, then this could due to a couple of reasons:
1) the length of the label
2) the position of the label
3) the size of the chart
Keep in mind that displaying all 41 labels on the chart could result in an extremely cluttered looking chart. AnyChart controls the visibility of the labels, depending on the above factors. So if your labels are quite lengthy, for example, and they are positioned to be displayed outside the chart, then AnyChart will display what labels it can for the given chart size. To work around this, having tooltips enabled is a good starting point. Alternatively, you could look at decreasing the length of the label text, changing the label position or even increasing the size of the chart. For further information on the label formatting, I would recommend reviewing AnyChart's online documentation, here: http://anychart.com/products/anychart/docs/users-guide/label-text-formatting.html?fromtree.
Regards,
Hilary

Chart Labels displays correctly in Visual Studio Preview but shows incorrectly in Report Manager after deployment

Hi,
We have built a SSRS report which contains a chart and a tablix. The chart labels (Male and Female) is displayed correctly in the Visual Studio Preview but in the Report Manager it displays as Female and Female.
These are the following things which we have tried to fix it:
Deleted and redeployed the report
Restarted the Report Server
Checked the report caching. There is no cache for this report.
We use SQL Server 2012 and Visual Studio 2010.
Any help is very much appreciated.
Thanks,
AJ

Hi AJ,
Per my understanding that you have two label "Male and Female" which display correctly in the Visual Studio 2010 but not correct in the Report Manager, right?
As you have mentioned that you have checked the report caching, please make sure you have set the "Do not cache temporary copies of this report" in report manager and also check to delete the rdl.data cache file under the project if you have
which path like:
\Visual Studio 2008\Projects\Report Project
If possible, please try to create an new report the same as this one to have a double check.
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Obiee 10g chart label size

Does anyone know how to change the size of the chart labels??
I'm trying to show some labels that are automatically trimmed (the label gets like this in the end ...), in the chart properties I can't find where I change this, probably this is a default number of chars per label?

It seems that leaving the truncate value by default, in the format text from Titles and Labels properties, was the problem. I set it to a large value and my problem was solved.
Hope it helps anyone.

Kernel Label problem for SOL MAN 4.0

Hi
When was installing a Unicode SolMan 4.0 on Win 2003 SQL server 2005.
I have downloaded a following CD for Kernel -
51031778_11 NW 2004s SR1 UC-Kernel 7.00 Windows Server on IA32 32bit
When I give the LABEL.ASC for kernel, it does not accept it and give me following error -
You entered: E:/nw04s/kernel/DVD_NW_2004s_SR1_Kernel_Windows__LNX_X86/LABEL.ASC
Found the label SAP:AKK:700:DVD_KERNEL:SAP Kernel 700:D51031778 but need label
SAP:AKK:700:KERNEL:.WINDOWS_I386:
I tried all these option from the below link, but it did not work
Kernel Label problem...
Does any one have solution for that?
I appreciate your help
regards
kamal

Hi udo lang,
I have downloaded the Kernel file 51031778_3 NW 2004s SR1 Kernel 7.00 Windows Server on IA32 32bit today. I will try to fix the problem by using this kernel.
I also got reply from Sap that solution for this issue is:
This is most unusual. Due to the currently running RampUp the
DVD's could have been updated.
I suggest that you try the following,
Download both the Unicode and NonUnicode Kernel files from the
SAP Service Market Place.
The Kernel DVD 51031778 contains the Kernel for Unicode and for Non-
Unicode, as you wrote, in directory "", label:
"SAP:AKK:700:KERNEL::WINDOWS_X86_64:"
Please check if you start Unicode Installation. Due to an incorrect
procedure sapinst requireds both Kernel-CD.
With the next release will be it correct. If you start a Unicode
installation it will be a unicode.
51031792_5 NW 2004s SR1 UC-Kernel 7.00 AIX 64bit
51031792_1 NW 2004s SR1 Kernel 7.00 AIX 64bit
Etract them to one directory, like:
<downloadDIR>/
kernel/
KN_WINDOWS_I386/
KU_WINDOWS_I386/
CDLABEL.ASC
LABEL.ASC
LABELIDX.ASC
When you ware asked for the kernel DVD, please enter
<downloadDIR>/kernel
SAPinst should take the right kernel version for the installation
automatically.
You may additionally refer to the below note for reference.
921593 Inst. SAP NetWeaver 2004s SR1 on UNIX
If the problem is resolved i will let you know. Thanks for your assistance
regards
Kamal

Format % in chart label when Data Label Option is 'Show Series and % value'

I am using:
OracleBI Discoverer 10g (10.1.2.2)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25)
I have a report that returns 2 columns 'Repair Status' and 'Count' The graph is a pie chart and I have selected the Data Label Option as 'Series Label and % value'. The percents displayed in the label have no consistent format. Sometimes 2 decimal places, sometimes 4 decimal places. I want the chart label to consistently display the % in the chart label with no decimal, i.e. 96%. How can I accomplish this?

Hi,
Where you selected 'Select Label and % Value', there is a button at the bottom, Format Data Labels. In there, there is a Number tab where you can play around by selecting Currency, Percent, etc. Have you tried this?
Cheers.
Mahesh

Bubble chart legend problem

Hello.
I have problem with bubble chart the problem is that in chart legend appear the same number of object what bubble in chart e.g. if chart have 5 bubble then legend also have 5 object.
What do I want to obtain is that in chart appear bubble which have different color (color depends on condition) and legend relate only colors. For example if chart have 4 bubble 3 - red and 1 - green then in legend appear only two position which relate green and red color (now appear 4 object three about red and one green).
Can any one tell me how to resolve this problem?

I already did this I added three condition (three colors red, green and yellow) in field "Value of" I choosed "is equal to" unfortunately it didn't help.
Maybe I joust try to describe what I want to show in this chart.
Suppose I have table with four columns u201Cdateu201D, u201Camount (number type)u201D, u201Csize (number type)u201D, u201Crisku201D (text type) now where this value appear on chart:
- date is x axis
- amount is y axis
- size is a bubble size
- risk will be bubble color
Now I have 3 kind of risk u201CLowu201D (green color), u201CMediumu201D (yellow color) and u201CHighu201D (red color).
Now in my data base I have table with record:
- u201C11-11-2009u201D, u201C1u201D, u201C2u201D, u201CMediumu201D
- u201C12-11-2009u201D, u201C2u201D, u201C1u201D, u201CMediumu201D
- u201C13-11-2009u201D, u201C1u201D, u201C1u201D, u201CHighu201D
- u201C14-11-2009u201D, u201C3u201D, u201C3u201D, u201CLowu201D
- u201C15-11-2009u201D, u201C1u201D, u201C1u201D, u201CLowu201D
Ok so now In My chart I should have 5 bubble and in legend three value (green, red, yellow) but in this case I always have five (the same number what record in table).
Sorry if this example is not clear.

Chart Labels In Apex

So I'm trying to create a chart that groups an aggregate function by the primary key. On the label, I cannot figure out how to query a lable that shows the primary key and the name of the customer that is located in a different table. I'm learning how to develop in Apex so I'm using the sample database right now. The following query adds up the order total by customer but I want the label to not just say the primary key (customer_ID) but also the customer last name (Cust_last_name) located in the demo_customers table. Here is the query:
select null link, CUSTOMER_ID label, SUM(ORDER_TOTAL) value1
from "LEARNING"."DEMO_ORDERS"
group by CUSTOMER_ID
Also I built this query with the query builder. Can someone explain the purpose of the "Null Link" in the select clause? And how can I get the percentages to show in a pie chart?
Edited by: 1001737 on Apr 22, 2013 2:23 PM

Hi, welcome to the forum. Please access your Control Panel and update your handle to something a bit more personal than 1001737.
When you said:
I want the label to not just say the primary key (customer_ID) but also the customer last name (Cust_last_name) located in the demo_customers table You were half way there, you just need to join your current query to the demo_customers table to retrieve the customers last name and use that as the label on your chart.
Try this version of the query in your chart series; I find that a pie chart is best for this purpose:
select
   null link,
   cust_last_name label,
   round(sum(order_total/total.tot),
   2) value -- determine percentage of all orders
from
   demo_orders,
   demo_customers,
   (select
      sum(order_total)tot
   from
      demo_orders) total -- sum all orders
where
   demo_orders.customer_id = demo_customers.customer_id
group by
   cust_last_nameYou asked
Can someone explain the purpose of the "Null Link" in the select clause?Placing NULL here states that you are choosing not to allow the action of a link when one of the chart labels is clicked. See this site for some excellent charting examples and further explanation:
[url [http://apex.oracle.com/pls/apex/f?p=36648]Sample Charts, Maps, Gantts and Trees
And how can I get the percentages to show in a pie chart?Percentages need to be calculated; to add the *%* to the label, set the Postfix within the Display Settings of Chart Attributes.
Jeff

Chart label font color

Is it possible to change the color of fonts in chart labels
(not axis labels)? The default black does not stand out well
against some colors.

Are you referring to data tips?
css style declartion can be used to change the text
color.

Pie chart Labels clickable

Hey guys,
Is there a way to make pie chart labels(callout labels) clickable?
Thanks in advance.

Hans: Thanks, again.
(And, again, this should be easy but isn't). Requestors ask the darndest questions.
Doug in York PA
Douglas R. Eckert

Numbers 3D Column chart labels

3D Column chart labels do not work.
If a label is displayed horizontally, it over-writes the next label and there is no way to turn the label vertically.

The chart will move allowing you to see the labels.
There is no way of moving the labels as you can in the 2D chart.
Best.

Can You Edit/Resize/Move Chart Labels in Pages '08?

I cannot get a seemingly basic page layout technique to work: editing pie chart labels. There appears to be no way to add a soft line break, adjust the text box, move the data label. You can't add a two-line title, either.
I am hoping that there's something I've overlooked. I handle communications for a 40-person nonprofit. I was so excited about the new iWork suite and the potential for replacing Office. I really liked the functionality of Pages and was on the point of recommending it. Then I worked on one of our reports. And got stumped by the charts. The pie charts look sharp. The color palette is better. But I can only seem to edit data labels in the inspector. Pages Help didn't help. It says I can select a label location (see below), but no pop-up exists or at least none that offers Middle or Below Right.
Can anyone help me solve this riddle? Working with charts doesn't seem like an advanced feature. I must have overlooked something, right?
from Pages Help
For pie charts, you display values as percentages by choosing Show Pie Values as Percentages from the Data Point Settings pop-up menu on the Series pane. To display the data series name for a wedge, choose Show Series Name from the Data Point Settings pop-up menu.
Select a label location from the Data Point Settings pop-up menu (for example, Middle or Below Right).

Hi Justin,
You should be able to manually move the X-Axis labels in the Preview Mode.
Go to the Chart Expert > Options tab > Uncheck the 'Auto-arrange' option.
-Abhilash

Feature Request: Control Text Orientation on Chart Labels

I notice that chart labels will automatically rotate 90 degrees counterclockwise when there is not enough space to display them vertically. However, I would like to be able to control this behavior so that I can make vertical labels when my charts are larger. A simple toggle option would be great.

In the Alerts tab of iChat preferences, select Video Invitation from the Event pop-up menu. Then select the Run Applescript checkbox and select Auto Accept.applescript from the adjacent pop-up menu.
Granted, this doesn't give you password authentication, but I don't believe anything is available for providing that capability.
Hope this helps.
Palms831

[svn:fx-4.x] 15099: Setting truncateToFit to false so that chart labels would get scaled but not truncated if space is not enough

Revision: 15099
Revision: 15099
Author:   [email protected]
Date:     2010-03-29 07:00:06 -0700 (Mon, 29 Mar 2010)
Log Message:
Setting truncateToFit to false so that chart labels would get scaled but not truncated if space is not enough
QE notes:
Doc notes:
Bugs: FLEXDMV-2359 (Axis labels are clipped in sdk 4.1, since label is used instead of UITextField)
Reviewer:
Tests run: checkintests
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXDMV-2359
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/datavisualization/src/mx/charts/AxisRenderer.as

Welcome to the forum Oreckel!
The best way to work with FCP's media files is to not overthink it. It's all done from the "Scratch Disk" settings. Just select a DRIVE for media captures and renders to go to. FCP handles the rest. It creates a folder called "Capture Scratch", another called "Renders" and a third called "Audio Renders". In each of these folders it creates a folder for each project file containing the media that is associated with that particular project, and it names these folders the same as your project files' names. Couldn't be easier.
Autosave Vaults, Waveforms, and Thumbnails should be kept on your startup disk in your documents folder. You probably already have one there named "Final Cut Pro Documents" If it's there just select the Documents folder and FCP will put these three folders in the one named "Final Cut Pro Documents".
Jerry

Crystal Report 2008 Area Chart Data Label Problem

Stacked Area Chart (Layer Cake) Issues:
We would like to use a Crystal Report (2008) Stacked Area Layer Cake chart to show the workload RPD's (Sum of Resources Per Day = Y value axis) and Data_Date of the study (M,Month of study date = X value axis, using fiscal year type cycle Oct - Sept).
Each Stacked Area represents the workload RPD's for a single project, or group of projects.
When showing labels or series information the chart becomes overloaded and not visible to read because there is over 400 data points.
Is there a way to break this dataset down so that values and/or labels are visible, using the crystal report options available? To suppress multiple layers and show a single label per layer?
We tried using the Color Highlight to group and display them by group and condition. The labels and series data points are still over crowded.
We also need to overlay the chart with the Average FC Totals from an additional Crosstab report. Is there a way to overlay this over the 1st layer of the report?

Stacked Area Chart (Layer Cake) Issues:
We would like to use a Crystal Report (2008) Stacked Area Layer Cake chart to show the workload RPD's (Sum of Resources Per Day = Y value axis) and Data_Date of the study (M,Month of study date = X value axis, using fiscal year type cycle Oct - Sept).
Each Stacked Area represents the workload RPD's for a single project, or group of projects.
When showing labels or series information the chart becomes overloaded and not visible to read because there is over 400 data points.
Is there a way to break this dataset down so that values and/or labels are visible, using the crystal report options available? To suppress multiple layers and show a single label per layer?
We tried using the Color Highlight to group and display them by group and condition. The labels and series data points are still over crowded.
We also need to overlay the chart with the Average FC Totals from an additional Crosstab report. Is there a way to overlay this over the 1st layer of the report?

Chart labelling problem

Similar Messages

Maybe you are looking for