Chart of Depn and Rate of Depn.

2 Co Codes are already using the same Chart of Depn ( CHN). Now another Co Code needs to be configured with same Chart of Depn (CHN) but with different % depn rate in asset classes?
How can it be done?? Can somebody please advice?

Thanks for your reply.
My question is when we create new Dep key then we have to assign it in Default Values for Asset Classes. In this already previous C.codes percentages are defined. If I would like to define in current C.code what could be the procedure? If I changed in this Defailt Values for Aset Classes it would be effect for existing C.codes. where I can define the Country specific % for the Same Chart of Depreciation(CHN)?
Could you please suggest me...

Similar Messages

Report for Planned vs Purchase Order(Qty and rate)

Hi
I have the following issue. My client is raising Purchasing requisition and Purchase Orders in Me51N and ME21n respectively. The Project Structure is used only to plan the quantities and rates whereas no PR is released from it. But the components are attached. Now if i make use of the code CN52N, i am getting the planned quantity and unit rate for the planned value whereas no Purchase requisition number or purchase order number is updated in it.
My requirement is that both planned quantity, rate along with Purchase order quantity and rate should be available in a report.
1. Is there any setting that we can make so that the details are updated in cn52N (or)
2. is there any other report with those details (or)
3. Should that be achived only through ABAP.
Please suggest.
Raghav

There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
You can view the pegging dynamically, for example in MD04.
Edited by: Mario Adler on Oct 27, 2011 12:13 PM

Country chart of accounts and alternative account No.

Hello Experts
we're using country chart of accounts and alternative account No. to fullfill FICO China localization, now I have below questions:
1, In manual FI posting in company code of china, eg. by transaction code FB01, which account number is used for this posting? Account number in operational chart of accounts or account number in country chart of accounts?
2, The alternative account No. in country chart of accounts also needs to be created with compnay code level master?
Or we just need create account in operational chart of accounts with company code level master?
3, If we use account in operational chart of accounts for FI posting by company code of China, after posing, two accounting documents are generated, one with account in operational chart of accounts? Another one with account in country chart of accounts?
4. Country chart of accounts is used for consolication purpose? Is there some difference with group chart of accounts?
Thanks,
Nicole

Hi Nicole,
1, In manual FI posting in company code of china, eg. by transaction code FB01, which account number is used for this posting? Account number in operational chart of accounts or account number in country chart of accounts?
> Account No. in Operation Chart of Accounts is always used for FI posting. Alternative Account No. is always for information purpose.
2, The alternative account No. in country chart of accounts also needs to be created with compnay code level master?
Or we just need create account in operational chart of accounts with company code level master?
> You only create Operational Chart of Accounts for posting. Alternative Account No. can be of two types 1):-is a freely definable text and you don't have any chart of Account for that, for example say legacy No. 2) The Account No. from a country Chart of Accounts, in this case you create a GL in Country Chart of Accounts.
3, If we use account in operational chart of accounts for FI posting by company code of China, after posing, two accounting documents are generated, one with account in operational chart of accounts? Another one with account in country chart of accounts?
> Not True. Only Operation Chart of Accounts will get posted. In the Alternative Account No., the Alternate Account No. will get populated.
4. Country chart of accounts is used for consolidation purpose? Is there some difference with group chart of accounts?
> No. Country Chart of Account is used for External reporting.. Group Chart of Account is used for Consolidation.
Regards,
SAPFICO

Tables for VAT or CST and RATE OF TAX for a PURCHASE ORDER

i am developing a report(abap ALV)
i need to display the VAT or CST and RATE OF TAX for a PURCHASE ORDER that has been posted .
which tables to refer?

hi kumar gaurav
Check KONV table..
based on Condition TYpe you can get...
Regards
Deva

Can Bridge Label and Rate Pictures on removable CD, DVD...?

Adobe Help file states so:
"You can label and rate folders as well as files. You can even label and rate files and folders on read‑only media, such as a CD."
but adobe techs can't figure out why it is not working.
seems to somehow work manually in certain workspaces (vert film strip, light table...) by sliding mouse over the 5 white dots. but pull down menu ( although not grayed out) will not register rating on pictures. and most important, the filter doesn't recognize them anyway, so pointless to sort.
version: Bridge cs3 2.2.1.9, all recent patches updated.
this had been exceptionally useful in past through the old build-in photoshop feature to rank thousands of pictures from client or photographer cds by building ranking into cache and allowing for sorting pictures before opening, saving, retouching in photoshop whilst still navigating through cd roots.
only recommendation from techs is to burn entire content of each cd onto your hard drive, then rank them, then re-burn a new cd with metadata adjusted if needed. if any of you deal with thousands of pictures coming from photographers and clients, i dont' have to tell you this is a huge asinine...
any idea much appreciated to solve the problem.

That is normal behavior I think, if you open a folder with only subfolders there are no cached files for Bridge to read. I don't know exactly with CD but if you let Bridge build the cache for that folder the filter probably appears after showing only no rating.
If you have otherwise problems with filter or anything else first is to use the menu tools - cache - purge cache for folder, if this is not working refresh preferences with holding down the option key while restarting Bridge and choose refresh preferences out of the three options

SSRS 2008: how to show an empty chart with legend and x and y axis when no data available

Hi,
I am using SSRS 2008, I generated one chart in report designer with the data from Analysis Services (Cube).
According to the dataset, there is no data returned when I run the query. so when I preview the chart, there is nothing but "no data available" showing on the chart.
Here I want to know is there any possible to show an empty chart with legend and x and y axis?
If it is possible, can you tell me how can I make it?
Best Regards.
Connie Zhu

Hi,
When there is no data, the chart displays the message "no data available". But using a little work around, you can display an empty chart.
Please find the below steps given to achieve this
1. Create a new dataset using TSQL to return 1 row of data having the category field and value field set to 0. Add the fields that are necessary for the category fields, series fields and datafields.
   A simple example would be like
   SELECT 'abc' as Category, 0 as Amount
2. Add a new chart, set the category field to 'Category' and set the data field to Amount from above dataset created in step 1.
3. In the new chart, right click the category axis and select axis properties, Click on the labels tab, check on
'Hide axis labels' and then click ok
4. Now set the Visibility property of both the charts depending on the rows returned from your main dataset
   a. click on your main chart and set its Hidden property to :
=iif(CountRows("MainDataSet"),false,true)
   b. click on the new blank chart added and set its Hidden proprety to (the opposite) :
=iif(CountRows("MainDataSet"),true,false)
   Note : Please change the dataset name in above expression "MainDataset" to the name of your chart's dataset
5. Resize the new chart to the same size as your main chart, then position the new chart on the place as the main chart.
   (Note : You can set the position of new chart to be same by copying the location property from the main chart)
6. Now run and observe the result. When there are no rows returned by your main dataset, the new chart (the blank chart) should be displayed.
I've added a working sample of this kind of a report
here.
Hope this helps. Please feel free to discuss if you have any questions.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

How to create a chart with x and y input arrays

I am trying to create a chart that receives chunks of data from a while loop. I know how to create a chart in order to append new data points to those points already in the display, but a regular chart doesn't let me specify the x axis data points. Is there a way to create a chart with x and y array inputs?
Thanx,
Tom

It's called an XY Graph. If you need an XY graph to behave like a chart, look at the shipping example called XY Chart.

When I cull through my images in the filmstrip everytime I use my right arrow and rate a photo it jumps back to the first thumbnail and i have to arrow all the way back to where I left off. Is this a setting issue

When I cull through my images in the filmstrip everytime I use my right arrow and rate a photo it jumps back to the first thumbnail and i have to arrow all the way back to where I left off. Is this a setting issue

Art,
I am trying to follow your very precise steps, and in my case (PSE11 also, Win7), the focus stays on the edited picture after I return from the editor to the Organizer. I am pretty sure that in the previous post describing your situation, I was able to reproduce the problem, but I don't remember on which version. I just tried in 'Folders' view mode to edit in a selected folder, then I clicked 'All media' so that no folder was selected. Same result in both cases.
Even if you prefer to work in folders view, you could take advantage of the ability to use 'albums'. It's a misleading word to describe a selection, a 'collection' of pictures, which you can sort as you want. It's a kind of 'playlist' like with music items. In the organizer, you can select a folder and create an album (even a temporary one) just by choosing 'create instant album'. Suppose you have made an album from a folder or a selection of highlighted pictures to edit. You can order them in date order, import batch or 'custom' order'. Since PSE12 you can also sort them in filename order. You should never lose the 'focus' on your last edited picture when coming back from the editor to the organizer. If the purpose of that album is only to help in organizing an editing session, you simply delete the album (the playlist) if you don't want to keep the list afterward.
I hope someone will be able to confirm how that can happen...
Edit;
I have just read Brian's post.
That may be the difference...

Format, use and rate in easy setup with the JVC gy-hm100u

Hi. I am about to start using Final Cut studio with my JVC gy-hm100u camcorder. What format, use and rate should I choose in the easy set up?

sorry missed out some info:
There is a specific codec listed in FCP set up for the JVC GY-HM100, it is only available in version Final Cut Pro 6.04 and later.
In FCP pro v 7 you simply drag and drop to the timeline
Earlier versions of FCP do not support the camera.
The codec used is an XDCam EX codec

Sysgen : How to read the input port data type, width and rate dynamically in a masked subsystem ?

Hello everybody,
     I am designing a general purpose block in system generator. I pass the user parameters to the block through masking it. Some user parameters can change the block configuration. The input port data type, width and rate can also affect the block configuration.
     The problem is that these values (input port data type, width and rate) are subject to change. So I should read them dynamically, then change the block configuration through programming the "Initialization Commands" field. But unfortunately there is no straight way to read the input port information.
     There are some methods in for example the "Black Box". these are:
input_width = this_block.port('din').width;
input_rate = this_block.port('din').rate;
But these methods are not applicable to a masked subsystem.
I have tried other ways also. You can find them below. None of them worked.
Does anybody know how can I solve this problem?
Other ways I tried:
1)
design_name([],[],[],'compile')
q=get_param(gcb,'PortHandles');
get_param(q.Inport,'CompiledPortDataType')
get_param(q.Inport,'CompiledPortWidth')
get_param(q.Inport,'CompiledPortDimensions')
design_name([],[],[],'term')
2)
ssGetInputPortDataType
3)
ts = Simulink.Block.getSampleTimes([gcb '/Input'])

Today we rely on Simulink to perform parameterization of your designs in two ways:
Parameterizable Subsystems and Blocks : Parameters themselves can be MATLAB expressions that need to be evaluated for which we need the MATLAB interpreter
The very useful Rate and Type propagation or Simulink compilation that allows us to specify types & rates in one location that gets systematically propagated to all.
To truly make the HDL Netlist that is generated from SysGen parameterizable, we would have to implement some of this capability in the HDL netlist itself by:
Using Generics(VHDL) or Parameters(Verilog) - We would have to capture the bit width(type) propagation through levels of hierarchies and finally parameterize the IP itself based on this value
Since IP itself does not have this capability through generics, we would have to package a separate tcl script that updates the IP parameterization appropriately in response to top level parameters(or GUI parameters)
Interpreting MATLAB expressions and translating them into VHDL/Verilog expressions (alternatively tcl expressions of IP). In simulink, mask parameters can be passed from one level to the next. Also parameterization of a block can be composed of Matlab expressions using variables from ancestor masks & the MATLAB interpreter – so we will need to somehow capture that as well.

How to display the Quantity and Rate fields in PO Report

I am trying to get a Purchase Order report that has the following fields in it.
1. Ordering Date
2. Purchase Order ID
3. Supplier
4. Product
5 Quantity
6. Rate
7. Amount (Quantity x Amount)
The reports under the Purchase Order WoC do not display Quantity and Rate.
Any more information like pointing to an Article or Help Topic is appreciated.
Regards
Yagyesh

Try the Purchase Order Volume report as your starting point.
I got everything you need onto that report in about two minutes (except quantity which may take longer).
The report can be found under the reports menu or you can find it under Business Analytics WoC if you have access.
I have been using the Business Analytics WoC for all of my reporting since it saves me the step of going to each WoC to look for the core reports.
Jim

Chart of Account and Country COA

Hi All,
Can some tell me difference between Chart of Accounts and Country Chart of Accounts. And for What purpose Country Chart of Accounts is used.
Regards,
Kiran.

Hi,
Chart of Accounts
Definition
This is a list of all G/L accounts used by one or several company codes.
For each G/L account, the chart of accounts contains the account number, account name, and the information that controls how an account functions and how a G/L account is created in a company code.
Use
You have to assign a chart of accounts to each company code. This chart of accounts is the operating chart of accounts and is used for the daily postings in this company code.
You have the following options when using multiple company codes:
You can use the same chart of accounts for all company codes
If the company codes all have the same requirements for the chart of accounts set up, assign all of the individual company codes to the same chart of accounts. This could be the case if all company codes are in the same country.
In addition to the operating chart of accounts, you can use two additional charts of accounts
If the individual company codes need different charts of accounts, you can assign up to two charts of accounts in addition to the operating chart of accounts. This could be the case if company codes lie in multiple countries.
The use of different charts of accounts has no effect on the balance sheet and profit and loss statement. When creating the balance sheet or the profit and loss statement, you can choose whether to balance the company codes which use different charts of accounts together or separately.
Structure
Charts of accounts can have three different functions in the system:
Operating chart of accounts
The operating chart of accounts contains the G/L accounts that you use for posting in your company code during daily activities. Financial Accounting and Controlling both use this chart of accounts.
You have to assign an operating chart of accounts to a company code.
Group chart of accounts
The group chart of accounts contains the G/L accounts that are used by the entire corporate group. This allows the company to provide reports for the entire corporate group.
The assigning of an corporate group chart of accounts to a company code is optional.
Country-specific chart of accounts
The country-specific chart of accounts contains the G/L accounts needed to meet the country's legal requirements. This allows you to provide statements for the country's legal requirements.
The assigning of an country-specific chart of accounts to a company code is optional.
Integration
The operating chart of accounts is shared by Financial Accounting as well as Controlling. The accounts in a chart of accounts can be both expense or revenue accounts in Financial Accounting and cost or revenue elements in cost/revenue accounting. You can find additional information on this subject under Cost Accounting and Chart of Accounts.
Thanks,
Rau

Problems with .chart-plot-background and event handlers

Hello. I'm trying to add event handlers to my chart so that the user can be allowed click within the chart itself to perform certain actions like dragging, zooming, etc. To avoid having to deal with handling mouse clicks that lie outside the chart itself (for example on the axes), I've found that:
.chart-plot-background
is the Region that gives me the entire chart and nothing else. However, when I attach mouse listeners to this Region, the event is only registered on half of the cells in the chart. If you've seen the default JavaFX Chart background layout, you know that it contains alternating rows of cells with slightly different coloring. I've found that only the rows with the lightest gray coloring actually register a mouse click on them, which makes me believe the dark grey cells are not part of the .chart-plot-background, but something else on top.
To me, this feels like an oversight in how the regions of the chart are defined. Why can I not get a listener to work on the whole chart and nothing else? Currently the only workaround seems to be to take the Region:
.chart-content
instead, and compute the difference between this region and the .chart-plot-background in order to manually suppress mouse clicks that lie outside .chart-plot-background.
Anyone have suggestions? Is this worth issuing on the JavaFX Jira?

Hello,
I'm not an expert on controls, but here is my guess based on your description: when you register an event handler on a "background" node, it is called only when the mouse hovers over the background node - I suppose the light gray is the background with the light gray cells being transparent and dark grey cells being filled. So the behavior seems correct - you can't expect the events to be delivered to background when it is covered by other nodes. I think you really should register the handler on the entire chart and filter out the events you don't want to handle. This however should not require much of computing the difference between the regions, it should be possible to do just something like
if (!background.contains(event.getX(), event.getY())) {
return;
Provided that the background doesn't reach under the axes as well. Note that if there are any different transforms between the background and the node with the handler registered on it, you may need to recompute the coordinates by
background.sceneToLocal(event.getSceneX(), event.getSceneY());
And use the contains method on that.

Quantity and Rate check while creating PR through PS

Hi Friends,
I am Creating PR through PS (Project System CJ20N). while creating PR i want to give reference of Outline Agreement (Contract).
I want the contract limits (Value or Quantity) should be checked while creating PR.
Is there any message control to check if the PR quantity and Rate exceeds the Contract Quantity and Rate
Regards
Sujit

Hi,
PR is not a purchasing document. It is an internal document. In PR. only valuation price appears which comes from material master. Hence how that price will be compared with contract price and rates?
Regards,
Aaditya

RRB- Quantity from Project and rate from sales order

Hi All,
I got scenerio in my project where project is having resource related billing. Now ap per the client requirement, we have a sals order and projects. All prjects are software projects. Now my requirement is client is looking for a system there billing can be done at projet and resource level. which means if project is having 50 confirmed hours. In - dp91 one debit memo requiet should be created with 50 hours and rate should come sales order.
Means if on a project 50 hours has been confirmes than in debit memo request 50 hours should come from the prject and rate to be billed should come from sales order.
Kindly suggest.
Regards
Abhishek Sinha

Dear Virendra,Abhinay & Gokul,
Thanks a lot for giving guidance. As per conversation above i can feel that we can overwrite the rates from project to condition records in SD. Is there any specific condition type made for RRB as my SD consultant never worked on RRB scnerios. Again reconfirming, in my current system at the time of debit memo request sytsem is taking all cost from project for billing but i want that system should take the confirm actual hours from proect and rates to bill them from SD.
Once again thank a lot for showing interest. Sorry for replying late because of different time zone.
Regards
Abhishek Sinha

Chart of Depn and Rate of Depn.

Similar Messages

Maybe you are looking for