Checking header on each page for memo field

Hi,
I have a report which has several details sections (4). In each detail section I have a title field and a content field. The content field is a memo fields and my problem is when the memo field goes on to another page it does not show the header.
I read somewhere about having the memo fields in sub reports and then in the subreport put a group in and the header in the group header and set repeat at top of every page to true. I tried this but my table is always empty because in vb code I create a memory recordset and set that as the recordsource. When I try to preview the report I get and error:-
This group section cannot be printed because its condition field is nonexistent or invalid.
I am getting I get this error because I have changed the datasource of my main report.
Is there another way to solve my issue?
Thanks for any help,
Jiggy!

I have made some progress. I now get the report showing the subreport but because the detail section does not fix on page it is starting it on a new page. I want it to fill the rest of the page and then continue on to the next.
Any ideas please,
Jiggy!
Edited by: Jigabyte on Dec 13, 2011 3:29 PM

Similar Messages

Group heading on each page..

I am trying to get BI Publisher to output a group heading on each page of my report.. At this time, I am using the Word/RTF version to build my layout.
I have information in the word document header and footer, and tried adding the group by column in the header, but that only returned my first group value, always!.
is there a safe solution? I have looked through the forum and seen many questions on this and not any simple answers..
Thank you,
Tony Miller
UTMB/EHN

Just checking to see if you received the e-mail and the file that was attached... I am still looking for solutions to the issue..
Thank you,
Tony Miller
UTMB/EHN

Repeating Group header on each page

Hello Everybody,
I have two groups in my report. For my first group value, i have given report - group expert - options and checked "Repeat group header on each page" assuming that my first group values will appear on each page. But it is not doing so. In one of the page the group footer values are appearing without my first group values.
I belive my problem is my second group values are ending in one page and first group values are extended to next page . Can any one please hep me.

if that is the case Narukonda 1, there are several sap notes dealing with this issue...please see this sap note [here |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313333333133373339%7D.do]which deals with both orphaned group footers and group headers.

Repeat Group Header on Each Page in Subreport won't reflect when generate by JRC

Hi All,
I have a report that contain several Subreports. Inside the Subreport, there are Group Header section. I have checked the option of "Repeat Group Header on Each Page". It works fine when I preview in Crystal Report. But when I using JRC to generate the report result. The group header only display on the first page of the group details.
More, Crystal 10 Common Monthly Hot Fix (English) already installed.
Any idea?
Thanks a lot for your help!
Donald

Hi,
Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
Thanks
Aasavari

How to add an image or static text in the header of EACH page of a cross-Tab report

Post Author: rtutus
CA Forum: General
Hi, I use Crustal 11.0.
I have a cross Tab. I display the items on the left column and the months horizontally, the items are grouped by category field. The values are the sum of quantities are displayed for each month. Like this:
                         Items         Jan       Feb       March .....................Total
Category 1
                         Item11         val11     Val12      Val13                     Total values
                         Item12         val21     Val22      Val23                     Total values
                         Item13         val31     Val32      Val33                     Total values
Category 2
                         Item21         val11     Val12      Val13                     Total values
                         Item22         val21     Val22      Val23                     Total values
                         Item23         val31     Val32      Val33                     Total values
Category 3
                         Item31         val11     Val12      Val13                     Total values
                         Item32         val21     Val22      Val23                     Total values
                         Item33         val31     Val32      Val33                     Total values
The problem, I want to add a page header for each page of the report.
When Crystal reports first displays my cross-tab in the designer, CR displays the cross tab in the Report header section. I d like to add text or image for each page and not only at the begining of my Cross-Tab.
If I just add an image or text at the top of the report designer, which is my report header, I get the image or text only on the begining of the 1st page of my report but never in the other following pages.
If I try to work around the problem and move the cross Tab to a group section instead, and then put the Image in the group header, I get what I want, but the problem is that:
The columns header: Jan, February....December are displayed for each group of my report and not only in the beginning of the report. I get something like this:
                         Items         Jan       Feb       March .....................Total
Category 1
                         Item11         val11     Val12      Val13                     Total values
                         Item12         val21     Val22      Val23                     Total values
                         Item13         val31     Val32      Val33                     Total values
                         Items         Jan       Feb       March .....................Total
Category 2
                         Item21         val11     Val12      Val13                     Total values
                         Item22         val21     Val22      Val23                     Total values
                         Item23         val31     Val32      Val33                     Total values
                         Items         Jan       Feb       March .....................Total
Category 3
                         Item31         val11     Val12      Val13                     Total values
                         Item32         val21     Val22      Val23                     Total values
                         Item33         val31     Val32      Val33                     Total values
You see the months get duplicated. Any way, my real need is to add an image or text in the header of EACH page of a cross-Tab report.
Thanks a lot for your help.

Hi Divya,
you could do for example in the wdDoInit() of the view
wdContext.currentContextElement().setPicture("picture.gif");
Now you assign this context variable to the Tab using the Tab_header's imageSource-Property. When you click on its value column, you see a button with three dots on it. If you click on this button, you will get all context nodes and attributes for this View. Usable variables are clearly marked, you now choose the one named Picture or what ever name you prefer to use. But it must correspond to the one set in the wdDoInit.
I think setting a picture (not necessarily for the tab-page) is done in one of the excellent tutorials. If you are a newcomer I strongly recommend doing some of the tutorials. I have learned tremendously from them.
Hope this helped
Harald

Repeat Header on each page

Hi,
I have a problem of repeating the Header on each page.
I have tried using the following options going through other threads on this topic. But it didnt work.
1. In Table properties, repeat as header row at the top of each page
2. Header info <?start body?> body <?end body ?> footer information
Please help me out..
Thanks,
shashi

1.
sorry you mis-understood it.
""In Table properties, repeat as header row at the top of each page""
this is to repeat the top row or selected row to repeat as a table header in every page on the top of the table, and not as the Page header.
2.
the elements occurring before the beginning of the body area will compose the header.
The elements occurring after the body area will compose the footer.
Use the following tags to enclose the body area of your report:
<?start:body?>
<?end body?>
So,this should definitely work.
http://winrichman.blogspot.com/2008/09/header-footer-using.html
for id , check in my profile

Repeat a Header on each page of a Report that includes expressions - Report Builder 3.0

Is there a way of repeating an header on each page of a report with the built-in expressions representing the new value on each header. Example, Page 1 is correct but page 2 - the permit number, address and Tract does not match up, it repeats all the
information from page 1.

Hi KittyCat101,
According to your description, you want repeat a show with expression to show Permit Number and Address dynamically on each page. Right?
In Reporting Services, table header is not in any group row, so when you put expression with data field into header row, it will only return the first row of that data row. This is the reason why it always shows the information as Page 1.
In this scenario, we can make records group on Permit Number. Then we put the Permit Number and Address in the group header. Set page break between each group instance.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Heading in each page in a Sub Report

Hi,
I want to display a heading on each page in a sub report but the sub report doesnt have a page header. How can I do this.
Thanks,
Reena

Reena,
The best way is to do one simple step at a time.
Take out the DrillDownGroup Level for now.
Here's one possibility:
If you have groupings on the main report, sometimes you can go
to Section Expert / Suppress no drill down - formula box and write
something like:
NextIsNull(GroupName)
...so that when the group runs out of names, it will display the page header
you put this formula in.
What you're trying to do is:
Create a Page Header in the main report that will show above your sub report. This is a substitute for the fact that Crystal doesn't have sub report headers. How you turn it on and off is up to you.
You put the text that you want to display in the added page header e.g., page header b or c or ?
The Panda

How to repeat group head on each page

I have problem with repeat group heaf on each page, I've ticked the option 'Repeat group head on each page' from the Change Group Option. But the group head didn't appear on each page when I previewed the report. Does anyone have a solution/explaination to this?
Cheeers

Sorry Gents, I did't make my porblem clear.
To James Terry
Yes, My reports contain one or more sub-groups (only group 1's group header needs to be repeat on each page).
To Graham Cunningham
I found pages , containing only group 1's group footer summarized info, don't display group 1's group header. Just like what you said ' It will only repeat on pages that display group information'. Is this a bug or sort of default rule? What else can I do if I want the group header to repeat on each page no matter whether there is group info or not, besides moving the info from group header to pager header?
Thanks a lot.
Regards
Joseph

Repeat Group Header On Each Page not working

Hi,
I have a report that have 3 subreport, and in the Subreport, there is Group Headers that enabled the option "Repeat Group Header On Each Page". It works fine in the CR10 preview. However, the header won't repeat in the PDF generated by JRC.
Any Idea?
Thanks a lot!!

Hi,
Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
Thanks
Aasavari

Print field in header of each page

I am attempting to put a field in the Header of my RTF template for my BI Publisher report. I am using the BI Pub Desktop and in Word when I am doing this.
It says that I am not allowed to put a feild in the header, footer, textbox , etc...
How can I have a field print in the header or just below the header of every page in my report.
Thanks
Steve B

Look at my explanation here ,these might help.
http://winrichman.blogspot.com/search/label/element%20in%20header
http://winrichman.blogspot.com/search/label/different%20page%20header
http://winrichman.blogspot.com/search/label/diff%20header
http://winrichman.blogspot.com/search/label/header

Repeat Group Header On Each Page with Underlay Following Sections

How to overcome the following problem?
1. I am using Crystal report 13.0.5.891
2. I have designed the report with Group Header as [Underlay following section]
3. I have checked the group to repeat on each page
4. Number of lines in the group header may vary
5. Number of lines in details may also vary
My objective is to print the separator line placed in group footer, after the
header lines or after the detail lines which one is taking the maximum lines.
This is not happening, and I am getting the following output, which is not meeting my requirement
Where the "LINE IN GROUP FOOTER" should appear after "Group 1 Header Line 6" in the second page
as the report ends there, but in the output, the line is coming just after the end of detail record.
like following
As a result of this, the next record of the group is overlapping with the first record and creating a mesh
------------------------------------------------------------------------------------------------------------------------------------ PAGE 1 OF 2
Column Heading 1                       Column Heading 2                      Column Heading 3
Group 1 Header Line 1                 Detail Record 1 Line 1
Group 1 Header Line 2                 Detail Record 1 Line 2
Group 1 Header Line 3                 ----------------------------------------------------------------------------------
Group 1 Header Line 4                 Detail Record 2 Line 1
Group 1 Header Line 5                 Detail Record 2 Line 2
Group 1 Header Line 6                 Detail Record 2 Line 3
                                                  Detail Record 2 Line 4
                                                  Detail Record 2 Line 5
======================LINE IN GROUP FOOTER========================
PAGE BREAK
------------------------------------------------------------------------------------------------------------------------------------ PAGE 2 OF 2
Column Heading 1                       Column Heading 2                      Column Heading 3
Group 1 Header Line 1                    Detail Record 3 Line 1
Group 1 Header Line 2                    Detail Record 3 Line 2
Group 1 Header Line 3                    Detail Record 3 Line 3
Group 1 Header Line 4                    Detail Record 3 Line 4
======================LINE IN GROUP FOOTER========================
Group 1 Header Line 5
Group 1 Header Line 6
Thanks in advance.

Thanks for you response.
I have updated the crystal report to 13.0.13.1597.
Still I am getting the same issue. I am generating the report in PortableDocFormat and exporting the byte array to download from the web browser. The application is developed in ASP.NET 2012 .net version 4.5.
I am also uploading 2 images of the final pdf that I am getting, for your opinion.
The report appeared in the first image is ok, where the first group has 2 child records and the second group has 1 child, but whenever I am changing the mapping in the database, where the first group has 1 child and second group has 2 child, my report is not working. as it is clear from the second image
Also after installing the new version of CR, my existing codes are not working, and giving the following exception in the line where ExportToStream is written.
Unable to cast object of type 'FileStreamDeleteOnClose' to type 'System.IO.MemoryStream'.
I have modified the existing code to overcome this exception.

Dynamic table with header on each page

Hi,
I am new to livecycle forms. I am not sure if I am asking a silly question but this is what I need to achieve.
I am designing a pdf form using livecycle designer. Need to build a dynamic table using data from xml. The challenge is I need to have a signature button on each page and the button will be below the table. So if there are for eg. 100 rows of data, then the table should be split into 5 pages of 20 rows each page (each page should have the table header) or based on page content and the button should be on the bottom of each page. Is it possible to achieve this? Also any example/suggestion on implementing signature using signature pad would be greatly appreciated.

Hi,
For individual objects, like the button that you want to appear on each page, you should place this on the Master Page. Position the button at the bottom of the page and then make sure that you size the Content Area, so that the button is OUTSIDE of the content area. This way objects on the design page will not overflow over the button. See here: http://assure.ly/g0Wx7r.
If you are using a Table object for your data, then you can set it to repeat the Header row, see the Object palette.
If you are using ADEP Designer 10 (latest version of Designer) AND your users will have Acrobat X/Reader X (eg version 10.1), then you could use Flash object for a signature field. See the example here: http://assure.ly/rqCuEn. See "Assure Dynamics Map with Signature" example. Again please note that you will need Acrobat X/Reader X to view this.
Hope that helps,
Niall

How to repeat table header on each page of PDF using Coldfusion

Hi all,
Can anybody help me in resolving this issue. The details are mentioned below.
I am generating PDF using <cfdocument> tag of Cold Fusion.
I have a header and footer to be displayed on each page. I am rendering data in a table.
If rows in the table exceed a page , and continue on the next page , I want the table headers to be repeated on each of the page.
Example :
Currently this is happening:
Page Header
Sr No
Name
Occupation
1
A
A
2
B
B
3
C
C
Page Footer : Page No 1
Page Header
4
A
A
5
B
B
6
C
C
Page Footer : Page No 2
What I want is :
Page Header
Sr No
Name
Occupation
1
A
A
2
B
B
3
C
C
Page Footer : Page No 1
Page header
Sr No
Name
Occupation
4
A
A
5
B
B
6
C
C
Page Footer : Page No 2

Hi Dan ,
Thanks for your inputs.
This way wont work beacause , am displaying other text and table both, and the table will be diplayed based on some conditions. If the conditions are true , table will be diplayed , else not.
I missed to illustrate text in the example. The scenario is something like this :
Page Header
Text .........
Table [Displayed conditionaly]
Page Footer
Please suggest me some way to do this.

How can i add a header to each page of my form

Hi
Iam creating a form - it was based on one of the templates, however I would like to add a header to the top of each page (it currently only has it on the first page). Can someone please help?
Many thanks
Shev

There isn't a direct way to do this for PDF forms (web forms have the header on every page). For PDF you would have to copy a text/image item at the top of each page yourself.
Randy

Checking header on each page for memo field

Similar Messages

Maybe you are looking for