CIC0 - Service Order status NTUP inactive

Hi,
When creating a Service Order by IW31 (Order) or IW36 (Sub Order), the System Status appears NTUP ACTIVE, but when the same action is performed by CIC0 both orders are created without System Status NTUP.
Our CIC0 use the function ISU_CREATE_ORDER, from the method CreateByOrderCode of the object ISUSMORDER.
Do you know if this is a standard diference between IW31 and method CreateByOrderCode ? Or is there any oss note to correct this issue?
Thank you in advance for your help.
Regards,
Nicolás.

There are any help for me with this issue?
Thanks a lot.
Regards,
Nicolas.

Similar Messages

Service Order status Not Changing From Resloved to Closed status

The service order Status not automatically moving from Resolved to closed after 30days.
Observation
We Revived program Z program ,seems to be fine.
I am set the program in debugging mode for testing the Service orders by reduce the time duraion for staus resolved to closed, am getting the getting the Error Test determination procedure is not evaluated .
Point of dout
1) Is there any relation between Test Determination Procedure and Z program.
2) while am checking for Text Customing for Consistency I found an error Log.
3) While creating Service Order Test field was Mandatory
for that have dout about is there any relation between for this program
Thanks in Advance
Regards
Raju.........

Solved ...
BD75 (RBDMOIND ) is T-Code and report name ...
need to schedule ...

How to update the service order status at meter level

Hi
I need to fetch one open service order and update the retrieved open service order status at meter level.
I am trying to do it through BAPI_ALM_ORDER_MAITAIN but i am not able to do it.
Please let me know the process how to update.
Thanks & Regards
Pallavi

Hi,
Check if this code works ...
REPORT zbapi .
DATA t_meth TYPE TABLE OF bapi_alm_order_method.
**Internal table for Operation (BAPI)
DATA t_oper TYPE TABLE OF bapi_alm_order_operation.
DATA t_comp TYPE TABLE OF bapi_alm_order_component.
**Internal Table for Opertaions UP (BAPI)
DATA t_comp_up TYPE TABLE OF bapi_alm_order_component_up.
**Internal table for BAPI Return code
DATA t_ret TYPE TABLE OF bapiret2.
***WORK AREA DECLARATIONS
**Work Area for Hedaer
DATA:wa_header TYPE caufvdb,
wa_meth TYPE bapi_alm_order_method,
wa_op TYPE afvgb,
wa_comp TYPE resbb,
wa_comp1 TYPE bapi_alm_order_component,
wa_comp_up TYPE bapi_alm_order_component_up,
wa_oper TYPE bapi_alm_order_operation.
PARAMETERS:TEST.
****Fill Method Internal table
CLEAR wa_meth.
wa_meth-method = 'SAVE'.
APPEND wa_meth TO t_meth.
wa_meth-refnumber = sy-tabix.
wa_meth-objecttype = 'COMPONENT'.
wa_meth-method = 'CHANGE'.
wa_meth-objectkey(12) = '000004000104'.
wa_meth-objectkey+12(4) = '0010'.
wa_meth-objectkey+16(4) = '0010'.
APPEND wa_meth TO t_meth.
**Component Internal table
wa_comp1-reserv_no = '0000001072'.
wa_comp1-res_item = '0001'.
wa_comp1-activity = '0010'.
wa_comp1-item_number = '0010'.
wa_comp1-special_stock = 'B'.
wa_comp1-requirement_quantity = '15'.
wa_comp1-stge_loc = '0001'.
wa_comp1-backflush = 'X'.
APPEND wa_comp1 TO t_comp.
**Component Update Internal table
wa_comp_up-special_stock = 'X'.
wa_comp_up-backflush = 'X'.
wa_comp_up-requirement_quantity = 'X'.
wa_comp_up-stge_loc = 'X'.
APPEND wa_comp_up TO t_comp_up.
**Call Bapi
BREAK-POINT.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
it_methods = t_meth
it_component = t_comp
it_component_up = t_comp_up
return = t_ret.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'. <--- Hope u r using this too
regards,
Naveen
Edited by: Naveen Deva on Apr 16, 2009 9:12 AM

Query on ZCOMP (Service Order Status) transaction

Hi,
While working with ZCOMP transaction (used to generate the Service Order Status Report), is it possible to enter multiple Service Orders at one go and obtain the ZCOMP download data for all the Service Orders together in one spreadsheet?
Edited by: Ben Harris on Dec 26, 2010 4:12 PM

Ben,
When the experts tell you that it is a customer report, they mean that the report was created by your company. No-one here in these forums knows anything about this particular report.
You need to approach people in your own company to find out what, if any, authorizations are needed to run this report. The report may be an ABAP report (ABAP is the SAP proprietary programming language that is the foundation of all SAP programs, whether created by SAP or created by your company). If it is, to change the report code you would have to be a programmer with an SAP developer's key.
It is not clear what 'settings' you need to change in the report. Standard reports within SAP (and most custom reports as well) have one or more selection screen. In these screens, you can sometimes filter or expand the suite of data that is extracted and displayed in the report. In most (but not all) reports, anyone allowed to run the report also has the ability to change selection criteria in the selection screen. I suggest that before you consult with a local developer, you experiment with running the report yourself, using changed selection parameters from the default. Such experiments are usually conducted in a test system (which I am sure that your company has).
Your manager should be able to tell you the procedure used by your company to investigate this question.
Good Luck & Best Regards,
DB49

How to track Service Order Status Change (IW31/IW32).

I have a requirement to send the customer an Email if the status of service order has been changed say from unconfirmed to confirmed. So i have to find out whether the status of the service order has been changed on the current date.
As per my understanding, Changes corresponding to any object are stored in tables CDHDR and CDPOS if the change document creation is enabled for that object. But in case of service order status, the changes are not being captured in these tables because change document creation is not enabled for the data element (J_STONR) of service order status.
Anyone having any knowledge about it please help me.
Edited by: Gagan Garg on Feb 23, 2009 6:52 AM

Hi,
Thanks for your reply. I have found out the way to track the service order changes. Function module STATUS_READ_MULTI can be used for the same. Pass service order number in OBJNR_TAB and the change document for status is returned in JCDS_TAB

Update Service order status based on Sales order billing status

Hi All,
Pls give some suggestions for below scenario.
Sales order will be created from Service order.
Service order should get completed once the sales order is billed fully.
Billing status is available in Sales order header. When ever billing is created, sales order status get updated.
Where I need to have the trigger (User exit etc...) to update the service order status w.r.t sales order billing status.
Rgds,
Senni.B

Hi,
As standard the system update service status, maybe some config is missing. Please check the copy control conditions in SD.
Hope this help.
Regards.

Updating service order status in CRM from R3 after the invoice is created

Hi all ;
I need to update the user status of an service order in CRM when the invoice related to it in R3 is created, so I have already know the service order no .
How can i achieve this by sending BDOC from R3 to CRM? Which BDOC should i use?and is it enough to fill only status data in BDOC?
Thanks.

Hi sushant,
When the R/3 Order status is set to 'Completed' then the system status for order in CRM system is automatically changed to 'Completed'.
So firstly check whether the User status ('Completed')in SAP CRM has the Business transaction event set to 'FINI'. So when the system status is set to 'Completed' the user status will also change to 'Completed.'
Secondly even check what are the statuses of item in the Orders.
regards,
Anubhav

Service Order status change thro' Action

Hi all abaper
After completing billing, thro the action I am changing service order user status as completed. i hv written my code in class method.
After billing as action runs my code from method execute and changes the status properly and gets save into system but action status shows incorrectly processed and comes in red colour in action monitor. following is my code plz help me
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Oct 13, 2010 11:13 AM

Are you processing status codes out of sequence? Talk to your functional specialist or look at the status config for these documents...sounds like you're going to completed without first setting a status code that would have to be there prior to your status code...I seem to recall doing status changes for these documents that were a multi-step process...set TECO, then CLOSED or something like that?

Service order status change

Hi,
I am working on interfacing CRM with a third party system. The integration should trigger when the user status of the service order change to say "status1" or "status2".
Also I want to update the user status programatically from another third party system.
Quetion-
1. Which function module/BADI can be called to update the User status?
2. Which function module/BADI will be called after the User status updated?
thanks in advance,
KP

Hello,
Question 1.
To update the user status, you can use crm_order_maintain or more specific CRM_STATUS_MAINTAIN_OW.
Question 2.
After the user status update, you can use the method after_change of badi CRM_ORDER_STATUS.
You can also use transaction CRMV_EVENT and create your own after_change event with your own FM.
Hope this will help you,
Regards,
Frédéric

Service Order - Status Release Reject "RELR"

HI Experts,
When i am created a service order from repair order automatically, it is getting created with the status release rejected "RELR", It should be released automatically from the repair order, wich infact was happening but now due to some reason this functionality not working,
Pls suggest what i should check for the same so that this should work fine
Urgent !!
Rgds

Bharat,
could you check whther any pemits assigned to the service order or not. The auto release for the ordertype is on, and because of ome reason system is not able to release the order.
check the Permit, and release it , then try to release it manually.
Prase

Issue regarding CRM service order status profile

Hi Guys,
Currently we are working on CRM 5.0 now the problem is when we create a service order then the sytem is throwing an error stating that
Diagnosis
Some system statuses cannot be set manually, but can only be set internally by the system. This is the case for status Contains Errors.
Technical Note
The maintainability of the system status is specified by SAP in the system table CRMC_STATUS_PROC. Every change to this table is a modification - SAP cannot take over maintenance for errors that result from changes made to this system table
we have defined a new status profile for service order which consists of
User Status                                                             System status
1. In Process                                                            In Process
2. Solved                                                                  Finished
3. Defered                                                                 Finished
kindly give your valuable inputs regarding this
Regards
Basavaraj patil.

Hello Basavaraj,
Please refer the following link
http://help.sap.com/saphelp_nw04/helpdata/en/0e/830b378a50fc5be10000009b38f839/frameset.htm
using status profiles for authorizations
Status profile tables
regards,
Muralidhar Prasad.C

Service Order status update function module ?

Hello,
We are looking for a Function/BAPI anything to update the line item status of a Service Order .We are using this Service Order in the CRM_IC (Interactive Center) Web Client Implememtation.
Thanks
Manoj

Manoj,
You could use CRM_STATUS_UPDATE, but if you use that function, the update will probably not be send through the flows of CRM (=> dependent systems, like MSA, will not be updated).
If you want the update to pass through the CRM flow, you'll have to use the standard Bapi to maintain orders (CRM_ORDER_MAINTAIN) or the inbound XIF-function which might be easier to use: CRMXIF_ORDER_SAVE.
The first is based on tables which contain the changes, the second is based on a bdoc-structure that you'll need to fill for yourself.
Grtz,
Michael.

Service Order status

Hi All,
How can i read a user and a system status of a serrvice order.. Is there any function module which can return this.
Regards
Anuj

Anuj,
Have a look at function modules STATUS_TEXT_EDIT or STATUS_READ_MULTI.
PeteA
[www.pjas.com]

Inbox Search of Status for Service Order in CRM_IC

Hi all,
When I am searching for a Service Order status in Inbox search in CRM_IC in the Result List it is not displaying Service Orders which are in same Status. It is displaying the list of Service Orders with different Status like Open, Inprocess, Not Completed etc., Can any body please........with details.
Points will be rewarded for currect answer
Thanks,
Shrik.

I have never used this function module before, but looking at the coding, I don't think this will serve your purpose.
I think it might be better to use method(s) from class CL_CRM_DOCUMENTS.
Via the GET_INFO method you can retrieve the documents you need and using the DELETE method should delete these object. I did use the GET_INFO method etc. but we haven't deleted any objects. But according to the name of the method, it should DELETE the documents.

Not more than one service order against same sales document item

A service order gets created against the sales order item as per
standard SAP process. As credit management is active, when the order
is under credit block for the customer the service order gets created only after the
credit block is released.
On revising the order line value the sales document goes for a block
again. Service order is locked. Both seem to be logical.
But on releasing the credit block this time , it creates one more service order against the same sales order item. Would logically expect the service order is
unlocked on release from credit block.
Can u pls explain this behavior ?? How do u avoid a new order creation and unlocking of the service order when the credit block is released.
Would like to avoid any change in the service order status once it has been created irrespective of subsequent credit status of the sales order.
regards
Ramanujam

Hi lisa ,
It is not possible to enter more than one service performer for a service in sales order .
But you can perform the service with two people and have two service confirmations.
The time entered in service confirmation will be reflected in invoice only(if time and material).
Also you cannot enter the time sheet with respect to sales order , it is only valid for project task and
and time types.
Regards,
Harish

CIC0 - Service Order status NTUP inactive

Similar Messages

Maybe you are looking for