Cisco 9124 and alert manager - showing sensor alerts

I currently have 2 Cisco Fiber 9124 switches in my environement. Everything seems to be working fine except I'm receiving these warnings every so often:
9/26/2013 01:25 PM
Sensor 26195
Alert me when any hardware component goes into a warning or critical state
9/26/2013 01:25 PM
Sensor 26196
Alert me when any hardware component goes into a warning or critical state
9/26/2013 01:25 PM
Sensor 26164
Alert me when any hardware component goes into a warning or critical state
9/26/2013 01:25 PM
Sensor 26186
Alert me when any hardware component goes into a warning or critical state
9/26/2013 01:25 PM
Sensor 26132
Alert me when any hardware component goes into a warning or critical state
I can't find anything in the logs stating there is a failure and when I check the power everything shows ok. Anybody have an idea what this is about? Could it just be a power fluctuation and by the time I get in to see the switch everything is ok?
Thanks

Hi All,
-check the load on the IPS module cpu/mem
-disable unwanted signatures..
run it to clear the signature statistics in peak hours
" show statistics virtual-sensor clear "
run it after 5 mins in peak hours
"show statistics virtual-sensor "
you can confirm by checking the signature details using below link, there by disable unwanted sigs.
http://tools.cisco.com/security/center/search.x
regards
rajesh

Similar Messages

CS Mars, Cisco Works and Security Manager

If we wanted to get all three applications, do cisco bundle it into one package? Or does it have to be purchased separately?

do we need a NetFlow card or is the service implemented by default in Cat4500. Is MARS & CSM suitable solution for main configuring, incident monitoring and evaluation of ASA5520 & Cat4500?
Yes, you need WS-F4531= card (Netflow is not available in Cat IOS as a service/command), which works with Cat 4500 Sup IV/V.
MARS is a monitoring device, and CSM is a management device. You can get critical NBA (Network Behaviour Analysis) alerts from MARS, and from CSM you can get configuration backups/audit/bulk administration (of security devices only).
Hope that helps.

Manage my alerts and reminders not showing in personal settings in project server 2013

I as an administrator can see the Manage my alerts and reminders in personal setting in the server setting page. Other than administrators, no body else can view this option. For example, a user who is assigned to the team members group with the My task
category cannot see this in his personal settings on the server settings page. I have done the following security settings -
In the team members group, added this user
Added the My Task as the selected category in the team member group
In global permissions, have checked manage my notification and reminders, manage personal notification (basically set the permission with the team member template and selected the additional manage my notification option).
In the category settings for my tasks, I have added this user as the selected resource, added the group "team members" in the permissions sections.
With all these settings, the user is unable to see the manage my alerts and reminders in the personal settings!! What am I missing!!!!?!??!

Nikhil - I provided an answer in the Linked In forums, I am posting it here for those who do not use LinkedIn.
Have you looked at creating a link to the "My Alerts" avaialble from the "My Settings" page accesible from the drop down list displayed in the top right hand corner
in PWA when a person clicks on their displayed name? I Created a new Quick Launch item linking to this URL - http://servername/PWA/_layouts/15/mysubs.aspx and it works for me.
You will also probably find that the delegation error you encountered was due to the fact that the person you were acting on behalf of belongs to a group where the
Admin permission "Manage Notifications and Reminders" is not allowed - as this is an Administrator permission within Global Permissions it is likely most users will not be allowed to do this. This blog provides some useful comments against the sometimes opaque
explanations provided in Microsoft documentation.
http://pietremen.blogspot.co.uk/2012/02/project-server-2010-global-permissions.html
Dominic Moss MAPM, MCTS, MCITP, MCT <br/> <a href="http://www.wellingtone.co.uk/category/news/">Wellingtone PM News</a><br/> <a href="http://www.wellingtone.co.uk/project-management/project-server/">Wellingtone
Project Server Site</a><br/> <a href="http://www.wellingtone.co.uk/project_management_recruitment.htm">Wellingtone PM Recruitment</a><br/>

I can no longer use all of the "Computer Management" tools against a remote computer. "Local Users and Groups", "Event Viewer", "Performance Logs and Alerts" and "Device Manager"

Hello All,
I can no longer use all of the "Computer Management" tools against a remote
computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
Alerts" and "Device Manager"
kindly see the below snapshot for assistance
REGARDS DANISH DANIE

This link may help....
http://windowsxp.mvps.org/admintools.htm
Freeman

Problem Managing Sounds and Alerts - Blackberry Z10

I just bought a Z10, love the phone, but I have the following issue when managing sounds and alerts:
In previous phones, I was able to configure sounds for txt messages and e-mails separately, but the Z10 has included them in the same cathegory when it comes managing sounds (You can't turn off sounds just email, it applies to both email and txt). Like many people, I don't want the phone to make any sound when I receive an email; however, txts have a different priority and I prefer to have the phone to make a noise when a txt message comes in.
Does anybody know a way around this?
Thanks in advance.

Did you scroll down when your in the Notification Menu?
You should be able to see in the Notification/Alert section
email Messages.

Outlook "Manage Rules and Alerts" flashes and wont fully open

Hi ,
one of my custom got a tricky problem. His rules flashes on every PC. have tried change pc, reinstall outlook for several version (2k3,2k10,2k13). For server side, Exchange2010, have tried move user to another mailboxdabase. but nothing worked.
Each time i click "manage Rules and alerts", a log will recorded in windows app log "operation fail", Event id 27(not sure the exact words in english version. it is “操作失败” in chinese). detail message :
System
Provider
[ Name]
Outlook
EventID
27
[ Qualifiers]
16384
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-04-08T00:58:05.000000000Z
EventRecordID
740183
Channel
Application
Computer
XXXXXXXXXXX.com
Security
EventData
操作失败。
I think it is a server-side problem, until i found OWA works fine. which really drive me crazy.
after some google, and search in forum, i found a similar thread: http://social.technet.microsoft.com/Forums/office/en-US/f6b75a36-9af9-4153-a5f9-57061a5729c0/outlook-2010-manage-rules-and-alerts-only-flashes-and-wont-fully-open?forum=exchangesvrclientslegacy
After follow the advise to delete all rules via MFCMAPI tool, seems still not help. i could only post a question here.
thanks for any advise
Go Patriots

Glad to hear that. For the "Stop Processing More Rules", you can refer:
http://www.outlook-tips.net/tips/tip-42-stop-processing-more-rules/
http://www.msoutlook.info/question/340
Best Regards,
Steve Fan
TechNet Community Support

Downloaded ringtone and alert tone from itunes, showed on my phone, an hour later they were wiped?? cannot find them now? help (restarted, synched etc etc) same problem

downloaded ringtone and alert tone from itunes, showed on my phone, an hour later they were wiped?? cannot find them now? help (restarted, synched etc etc) same problem

Hi jaswantfromlondon,
I apologize, I'm a bit unclear on the exact context for when or how these tones disappeared. If your tones have disappeared and you are having issues restoring them, you may find the information and steps outlined in the following article helpful (it refers specifically to 8.1.1, but the steps may more generally apply to your situation):
Restore missing tones on your iPhone, iPad, or iPod touch running iOS 8.1.1 - Apple Support
Regards,
- Brenden

Difference between Workflow and Alert management

HI all
Let me know the difference between workflow and alert management. ?
In Workflow if we want to trigger alert or mail.
We can use SO_NEW_DOCUMENT_SEND_API1 FM send mail.
But in alert we can use different method?
Can i know wht the exact difference between two?

Hi,
email messages can be sent with both technologies...
If you need to send just a simple email, use the ALM.
If you need to send email and wait something adding additional flows....use the Worflow.
Remember that with ALM is not possible to attach something to the email.
You can add additional steps like web addresses in order to perform further activities.
Luciano

Can't open Manage Rules and Alerts after adding a shared MB

Have a customer who is using a Terminal Server Environment, all server's 2008 R2 and we're using Exchange 2010.
Office 2010 installed on all server's.
If they add an additional mailbox to Outlook 2010, user's are then unable to open rules & alerts, no error message. It flickers and then nothing happens.
Nothing in event logs that I can see that suggests anything.
If I load up OWA, add a mailbox and then try to open mailbox - it works OK.
Outlook has been re-installed.
Office 2010 has latest service pack.
If you load up the shared mailbox on it's own, the rules and alerts works fine.
Seen a few threads relating to this but none of them seem to have a fix on there.
Any ideas?
Thanks in advance,
Lee,

Hi Lee,
I have a test in my environment using Exchange 2010 with Outlook 2010. I couldn't reproduce this issue in my environment. In your case, make sure that this customer has full access to shared mailbox. And then follow the steps below to add shared mailbox
to the customer's account and check the result.
open Outlook -> File -> Account Settings -> Change -> More Settings -> Advanced -> Add -> type shared mailbox name -> Ok
If the issue persists, use Outlook safe mode to determine whether the problem is caused by add-ins.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Infrastructure Navigator 1.2 monitoring and alerting

I was under the impression that Infrastructure Navigator did monitoring and alerting of services and applications where if something stopped working or had issues it can notify you via something like email or SMS etc. From what I have seen it appears that it only shows you what services are running on a VM and the dependencies it has with other servers. Is that the case or am I missing something?

Take a look at http://www.vmware.com/products/datacenter-virtualization/vcenter-infrastructure-navigator/overview.html:
vCenter Infrastructure Navigator automatically discover application services, visualize relationships and map dependencies of applications on virtualized compute, storage and network resources. A component of the vCenter Operations Management Suite, vCenter Infrastructure Navigator enables application-aware management of infrastructure and operations to better understand the impact of change, provide more complete disaster recovery protection and minimize downtime.
Automatically discover and keep up-to-date the names and version numbers of application components and services
Visualize application relationships, communication paths and backend connections at the infrastructure, guest OS and application level
Map dependencies of application components on the underlying virtual infrastructure to understand the impact of change and build disaster recovery plans with confidence
The use case you describe is more relevant to vFabric APM - VMware's perfomance management suit which among other capabilities, will alert and notify in case of application performance issues, unavailable services etc. take a look at http://www.vmware.com/products/application-platform/vfabric-application-performance-manager/overview.html

Logs and Alerts Configurations.

Hi Everybody,
Im newbie in XI, this is my first project and I need some ideas!
Ill appreciate any help
The Scenario is something like this:
Portal 6.0 with an iView to upload the xml file to XI. This iView is accessed to various users that are assigned to different organisms. So Portal does the distinction from user/organism.
The XI does the mappings and sends to R/3.
When some errors on processing occur in XI, I would like to send an Alert to the user who is responsible for the organism.
I know that XI have an Alert configuration, I read something and I feel that Alert Management works well when is configured for one Administrator responsible to manage XI.
See this situation: users in organism AA do an upload to XI. This processing generates an error. I am the user responsible for this organism and I would like to receive an alert in my inbox or another e-mail box to notify me about the error in question.
I need to determine in runtime who are the user responsible/organism, who have permission to receive the notification! There are some ways to configure Alerts to do something like this?
Another doubt
In the same scenario, I would like to show a XI error log in the Portal!
Im thinking something like this: In one iView and with ITS, I call SXMB_MONI transaction within selection criteria needed to show only the errors occurred for the user who sends the file. But before this, I need to know the parameters of the message to put in selection criteria of SXMB_MONI (ex. message-id).
How I can get these parameters (ex. message-id) in Portal from XI?
About this idea, any one with better suggestions?
Thanks for all
Best Regards,
Ricardo.

Hi Ricardo,
Check these threads for alert configuration in XI and alerts via e-mail...
Re: Alerts
Re: how to configure alert to send a mail
Anand

Monitoring and Alerting Infrastructure : Errors raised during Event Calculation

Hello together,
System: Solution Manager 7.1 Sp7
since one day I get this alert every five minute: "Monitoring and Alerting Infrastructure : Errors raised during Event Calculation".
Name....................Errors raised during Event Calculation
Start Time..............20.03.2014 15:12:27 CET
End Time................20.03.2014 15:12:27 CET
Managed Object..........Monitoring and Alerting Infrastructure
Managed Object Type.....Technical Component
Rating..................Red
Category................Exceptions
Status..................Open
Opening the alert shows this:
E2E Alert Analysis Report:
This metric outputs the der Event Calculation Engine (ECE) error messages. The ECE runs by default every minute, under the job name SAP_ALERT_CALCULATION_ENGINE, which then starts the report ACE_CALCULATION_CONTROLLER.
Analyze the error messages in the Application Log, as follows:
Start the transaction SLG1, and enter the object E2E_ALERTING and subobject ENGINE.
When opening trx SLG1 I can see this error:
Aggregate for managed object 00215ACCD6DE1EE2B8FEE39484598162, type
80E0ED08ADA71DEEBFD84650DEF6421F not found.
How can I fix this?
Thank you very much.
Regards,
Ralph

Hi Ralph,
We are facing the same issue is our system. I have checked the specified note and observed that few of the systems had to be updated in Managed System Configuration. I have updated the systems. But, the alerts have not stopped.
Can you please tell me the procedure to resolve this issue?
Thanks.
Regards,
Deepika R

Reporting Services 2012 for SharePoint and SQL Server Agent "Subscriptions and Alerts"

After installing Reporting Services for SharePoint (Denali) in my test farm, I'm trying to configure the "SQL Server Agent" access for Reporting Services. From Central Admin I'm going to the Reporting Service applicaiton configuration screen and selecting
"Provision Subscriptions and Alerts". I've tried both options on this screen. I've manually executed the "download sql script" in SQL Server, as well as entering a user with SQL sys admin rights on the SQL server into the login fields on the screen.
The role and permissions have been created for the application pool service account, but Reporting Services is still trying to connect with the annonymous login because I'm getting the following alert each time I open the "Provision Subscriptions and Alerts"
screen:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
The "status" on the screen still shows "SQL Server Agent State cannot be determined". Has anyone else seen this?
Thanks!!

Thanks for your reply!
1) Looks like the new Reporting Services does not run as a Windows Service so it's not listed in the "Configure Service Accounts" pulldown. As a result, I don't see how to set the service account. It's only assigned to an application pool.
I installed it into an existing application pool and that application pool "is" in the list and has a domain service account already assigned.
2) Which users need to be in here in order to configure the "Provision Subscriptions and Alerts" screen? I already have the farm admin account which is the account I use when running Central Admin.
3) As mentioned in #1, I've installed Reporting Services into an existing application pool with other service apps.
4) This link is for Reporting Services 2008 R2 which is very different install process. But I did follow the SQL Server Reporting Services 2012 RC0 installation instructions and the Reporting Services is functioning correctly with no errors.
I'm just not able to configure the sceduling the alerting with interfaces with the SQL Server Agent.
Thanks!

Report and Alert don't executed in the error handler with a JMS proxy service

Hi,
I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
My error handler contains two main elements :
- a Report action
- an Alert with a JMS destination defined
When the business service failed the message remain in the queue. It's the expected behavior.
The problem is :
- the report is missing
- the alert is raised but missing in the JMS destination defined in the Alert setting.
I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
Unfortunately the message don't remain in the JMS queue.
What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
This solution is not convenient and I hope another solution is possible.

Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Purchased ringtones and alerts disappeared after updating to iOS 8.2

since updating to iOS 8.2 purchased alert tones and ringtones have disappeared and following the restore times link does not restore them. Also, cannot update any apps from the App Store. How do I get back my purchased ringtones and alert tones?

Greetings EmmsieK13,
It sounds like you were trying to connect to the App Store when there were some system issues.
You can check the status at
Apple - Support - System Status
Note you can scroll back on the Detailed Timeline by clicking the back button to see some previous days.
Since the systems show they are up now, please try again and see this article for restoring your alert tones and ringtone purchases.
Restore missing tones on your iPhone, iPad, or iPod touch running iOS 8.1.1 - Apple Support
There's a section for "Restore your tones from the iTunes Store".
Thank you for visiting Apple Support Communities.
Nubz

Cisco 9124 and alert manager - showing sensor alerts

Similar Messages

Maybe you are looking for