Cisco Agent Desktop software running multiple times in Task Manager

Has anyone seen an issue with Cisco Agent Desktop v 6.6(1) where after closing the program completely it stays running in Windows Task Manager. We have the Agent software installed on 8 PCs and only one of them is having this happen to them. One time the PC had 15 instances of Agent.exe running in Task manager. A reboot of the PC corrected the issue, however when the issue does happen her chat box within the Agent software shows as Initializing and the agent's name appears and reappears on the Supervisor Desktop software.
If anyone needs any other info as to the versions we're using or anything else please let me know. I have searched all over the net for a solution and haven't found anything. My next step is to do a TAC case, but I wanted to post something here to see what responses I got.
Thanks,
Nick

Hi Nick,
Check this bug:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd75811
Multiple Agent.exe Instances Created Causing CAD Agent to Disappear.
Regards
Gurpreet

Similar Messages

JOB in Sql Server Agent should run multiple times.

Hi Guys,
I have a ETL SSIS job in Sql Server Agent, Which should run multiple times.
1. For Example : I scheduled a job at 10:00 PM, If the job fails at 10:00 PM it should run automatically again at 10:10 PM, if the job fails again at 10:10 PM then the job should run at 10:40 PM.
If the job gets success at first attempt i.e 10:00 PM, then it should not run at 10:10 PM.
Note : The time difference between jobs is 10 minutes and 30 minutes. And i know that we can run the job at regular intervals.
Thanks in advance

Just add retry attempts to whatever number you want (2 as per your original explanation) in Job step properties as below
Have a logic to include a delay of 10 mins . You can make use of WAITFOR function for that
see
http://www.mssqltips.com/sqlservertip/1423/create-delays-in-sql-server-processes-to-mimic-user-input/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Cisco Agent Desktop incorrect stats Agent Statistics Display

Hi,
I have a very strange problem with a cisco agent desktop user. The times/numbers as displayed in the Agent Statistics Display are incorrect. As you can see from image 1, the agent was presented with 14 calls. The total talking time is 7:22. However if you look at the actual times from image two, and add those numbers you will have a total of 54:42 minutes:seconds. Also the Max talking is incorrect since this filed should display the longest call which has a length of 14:22 min:sec. Also the ready times max/avg and so are incorrect. It's like it's displaying numbers from a different agent however the number of calls presented is correct. If i look at this specific user from the supervisor tool the numbers are correct, see image 3. (in this image a 15th call was placed) I have reinstalled the agent desktop software but this has not solved this problem. I've done some googling but can't seem to find anyone with the same issue and/or a way to troublshoot this. Anyone have a clue?
Image 1:
Image 2:
Image 3:

Hi Anand,
I've looked at the historical reports. Nothing weird there. The 14 minute call came directly from outside, no transfeer or anything. And even if this was the case then the 2nd longest inbound call is 8:30 and not 3:08. Also if you take the sum of all inbound call times you get almost 55 minutes. The difference is too much as the Toal Talking time displayed is 7:22. Also from the supervisor tool I do see the correct numbers.
Thanks again.
Regards,

Cisco Agent Desktop / Supervisor Desktop Issue with Full Disk Encryption

Has anyone had any issues related to running Cisco Agent Desktop or Cisco Supervisor Desktop on a machine running full disk encryption? Our desktop team installed full disk encryption software from Check Point, and it seams to be causing some issues with call monitoring, screen pops via workflow and connectivity to the UCCX server. It's not effecting every machine (that we know of), but the fix for us right now is to provide a desktop without the encryption software. I'm just wondering if this is related to us, or if there is any supporting documentation out there?
Any help is apprecicated.

CAD for IPCCX v4 does not support windows 7. See compatibility matrix:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
In my experience if you already have CAD installed and you upgrade the OS (without a fresh rebuild) CAD will work - but it is NOT supported. You should test this though.
You will not be able to install the older version of CAD on windows 7, the installer will give you errors.
Brian
please rate helpful posts

Cisco agent desktop has encountered a problem and needs to close error

A Remote Hotline user is experiencing crashes with her desktop agent. After logging into the program it generated the error message "The Cisco Agent Desktop has encountered a problem and needs to close"
I have removed the agent from add remove programs, re installed it and attempted to run it logged in as an admin and using both mine and the user's agent credentials and the program still crashes.
Agent desktop ver 5.0 Build 6.4.2.12 Windows XP
Any ideas?
Regardes, Chet

Thanks for the reply, this is what I did to resolve it:
Fix:
Uninstalled Desktop agent from add remove programs
Re installed program
Do a complete restart or the prog will continue to crash
Test program by logging in with user’s credentials

Error from Cisco Agent Desktop - The agent- or workflow-initiated action request failed.

We have roughly 20 agents using Cisco Agent Desktop version 85.1.417 and I have one that when she clicks the phone button to answer a call she gets the error: "The agent- or workflow-initiated action request failed."
I reinstalled the program, but she still receives the same error. What could be causing this problem?

This is what I found in the log:
2014-10-06 08:59:46:838 INFO VOIP2021 Desktop monitoring enabled for extension [9214].
2014-10-06 09:00:12:147 WARN STD3000 Get registry key <MTS_CitrixInstall> under path <SOFTWARE\Calabrio\CAD\Site Setup>. Object not found: <2:The system cannot find the file specified.>.
2014-10-06 09:00:12:159 INFO SOCKET0000 <CADEEMConnector> service on port <59015> has started.
2014-10-06 09:01:01:580 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781617 != 37533406)
2014-10-06 09:09:28:543 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781655 != 37533406)
2014-10-06 09:13:42:458 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781669 != 37533406)
2014-10-06 09:29:03:809 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781740 != 37533406)
I'm attaching part of the DBG log. I hope that it helps.
Thanks

How to install Cisco Agent Desktop 7.6(1) on Win7 X64?

I am trying to install Cisco Agent Desktop 7.6(1) on my Windows 7 64-bit laptop. This
error keeps poping up:
http://i.imgur.com/xtBFm.png
This directory in the error message does not exist on my computer. Other x86.Microsoft.VC80.CRT... folders exist, but they have different names than the one in the error message window.
What can I do to install CAD ?

I ran into a different problem back when WIN7 was released, the error was along the line CAD detected unsporting OS. No matter how I finagled the OS nothing would work. I did read a little blurb to modify the MSI install file and it works quite well. I have since installed my modded MSI Agent Desktop and Supervisor Desktop on WIN7 64bit also no problem at all. Locate yourself a copy of SuperOrca and open Agent Destop.msi and scroll down to LaunchCondition Delete the top two lines
Condition and Description
#1 (CADOR) OR ((VersionNT=500 AND MsiNTProductType=1) OR (VersionNT=501) OR (VersionNT=600) OR (VersionNT=500 AND MsiNTProductType>=2 AND NOT SERVER_INSTALLED) OR (VersionNT=502 AND NOT SERVER_INSTALLED))
#2 (CADOR) OR (NOT (SERVER_INSTALLED OR SUPERVISOR_INSTALLED))
Save the Agent Desktop.msi to something like Agent Desktop WIN7.msi save it someplace handy and run it.
You may find you need to run as admin IF your using WIN7 PRO/HOME etc etc Ultimate shouldn’t give you these probs if the application installs yet wont launch go to control panel look into running compatibility etc etc
If you have odd securities errors while running the program Blame the OS go to the Cisco install folder and give the domain user full control security ect on THEIR folder, this will clear up any client side issues.
Most who run into this problem delete the two lines indicated above then smooth sailing.

Graphical representation of Cisco Agent Desktop info

I have a weird request of me. Someone want to have a more graphical representation of the real-time data on their Cisco Agent Desktop. I don;t know where to begin to be honest.
Does anyone know of third party plug-in or something that I can be pointed to?
Thanks!

Assuming this is UCCX, with version 10 you will get CUIC real time reporting, which might solve the problem.
Chris

Cisco Agent Desktop (CAD) Timed Out

Hello Everybody,
I'm looking for a little insight into a problem that was encountered recently with a customer that essentially caused downtime. When the Agents were attempting to log into Cisco Agent Desktop it gave the following error:
"The request to log into the Cisco Unified CCX application server timed out. Please verify your system is online and try again."
CCX Version : 8.0.2.11002-3
CUCM: 8.0.3.21011-1 with LDAP integration/authentication
The customer does have high availability and after restarting both CCX servers the problem still occurred. Finally, once the CUCM publisher was restarted everything the login started working again. As the resolution was a server restart I'm looking for further information regarding this problem, why it may have occurred, and what can be done to prevent it in the future. It seems that LDAP issues are a common cause of this error but why? Can IPA be used as a backup if another situation like this occurs again?
I appreciate the time,
Thanks.

Hi Keith,
We could never state it will never happen again. CUCM, AD or UCCX could have a latency issue later on. However if you see the technote that I sent it explains what tracing is needed and how to verify that LDAP is not sending the acknowledgement back in time. Below is an example of the MIVR logs;
//Initiating login
461102: Jan 28 08:01:34.909 PST %MIVR-SS_RM-7-UNK:Trying to authenticate agent MSmith
The login ID is the same ID that is used to login to CAD. For our test MSmith was used.
The next message should be that login was successful; however, a time out may have occurred since the CAD timer has expired (10 seconds). We then see after the 10th second CUCM finishes the authentication.
//CUCM returns login successful after the 10 second CAD timer expires causing the timeout message to be displayed
461107: Jan 28 08:01:45.206 PST %MIVR-SS_RM-7-UNK:Successfully authenticated agent MSmith at extension 1904
CAD has ten second timer. If the successful message is not sent within that time CAD fails to login. The port change for the AD server that is the Global Catalog server is also documented in the CUCM SRND and should be used regardless.
I hope that answers your question.
Joe

Error Logging into Cisco Agent Desktop whilst using Cisco IP Communicator

Hi there,
I am having an issue whilst using Cisco Agent Desktop Version 7.0. If I use a cisco IP Communicator ( softphone) i get following message, "Login failed due to a configuration error. Please ask you system administrator to associate your phone with the RM JTAPI Provider user ID according to the instructions in the admin guide".
If user logs in to a normal Cisco phone then logs into agent there are no problems.
Bit of a novice so your help would be appreciated.

Hi
In your AppAdmin pages on UCCX, in the Unified CM Configuration screen, there is an 'RM' user defined.
This will be a user in CCMAdmin 'Application Users', which has all your CCX phones associated to it. UCCX uses this to CTI control the handsets... you need to associate the CIPC phone to that user.
Regards
Aaron
Please rate helpful posts...

Cisco agent desktop on window 7 and working with IPCC 4.0

Hi all,
i am using IPCC version 4.0.5 and Cisco Agent desktop client is installed on the windows XP machine
now we are planning to upgrade the all windows XP machine to window 7 32bits
before upgradeing OS from XP to windows 7 just want to know can CAD or CSD should be work onthe window 7 32bit
anyboday is using IPCC 4.X version with using CAD on the window 7 32 bits OS if yes CAD is woking fine with windows 7 or if any issue aries ?
Thanks in advance.

CAD for IPCCX v4 does not support windows 7. See compatibility matrix:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
In my experience if you already have CAD installed and you upgrade the OS (without a fresh rebuild) CAD will work - but it is NOT supported. You should test this though.
You will not be able to install the older version of CAD on windows 7, the installer will give you errors.
Brian
please rate helpful posts

When I close Firefox, then later want to start up again, I get I message that Firefox is still running. With "START TASK MANAGER", I need to close Firefox in order to start again.

When I close Firefox, then later want to start up again, I get I message that Firefox is still running. With "START TASK MANAGER", I need to close Firefox in order to start again.

I have the same problem. Firefox won't unload regardless of how long I wait. Literally hours ... I must go in and 'end the process'. This has been a real hassle for a while now. Even considered giving up on firefox. Please look into this! An additional problem; I have to run firefox to get the updates, but I can't get the updates to take because I can't get firefox to unload so I can restart it.

Palm Centro AT&T Desktop software run time error upon opening

I previously had a Palm 515m and the associated desktop software.
Just bought a Centro
I installed my the Desktop by Access software and was able to syncrinize several times, as well as open and use the software.
Today I receive the following error and cannot open the desktop software:
Microsoft Visual C++ Runtime Libr
runtime error
Program: C\ProgramFiles\palm one\palm.exe
abnormal program termination
I don't know if it matters, but my computer does sync on a network when I am at the office, and I do get error messages sying it cannot sync my palm files.
How do I fix this and get my desktop program to function progerly
Post relates to: Centro (AT&T)

That may work. If not ill leave this posted. Your IT can walk though my directions as needed to gets this up and running for you.
You should first make a copy of your data to have just in case something happens. You can find your data files by going to C:\Program Files\Palm or Palm One. Highlight your Palm Desktop username and right click and copy. Then go to your desktop right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do with Palm Desktop from your computer. Like the above folder delete the whole palm folder. One this is done you will need to delete some registry keys from your registry.
Word of warning, going here and deleting the wrong thing can cause your PC from starting up, crashing and deletion of programs and data. If you feel you are unsure of your self see if you have a friend that can help you or a PC technician that you can pay to help you. This will show them everything they need to delete. To help against this we need to do a backup.
Go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As box. Current location is fine should be in My Documents. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
Easiest way to make sure your doing the right one highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician. BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your palm desktop from the CD and do a hotsync. If it asks you for a username and you synced your device before, put in 'test" if you did not sync before create a hotsync name.
Post relates to: Palm Z22

Packaging Cisco Agent Desktop 6.1 software for installation

Hi guys
Anyone know if you can package up Agent Desktop, Supervisor Desktop, Desktop Administrator for installation via SMS.
I have been manually installing but our desktop team want to package it up for dployment via SMS.
Cheers!!

Absolutely. I have a customer who did the SMS packaging and push. I'm not an SMS person so I can't help with the details. Sorry.
Regards,
Geoff

Stored proceadure is running multiple times from crystal..Urgent...

Hi friends,
I am running the stored proceadure from crystal report. And it is executing two or three times. I can come to know through debug points which i placed in sotered proc.
It is very urgent...any help is appreciated.
Thanks,
Vijay

I am having the same issue. I have a very simple XI crystal report that calls a stored procedure. I have checked the report option you mentioned - it is not checked and i have removed all subreports to take away any question about them. It is still calling the procedure multiple times.
My oracle stored procedure is getting executed THREE times in one run of my crystal report!
I have created a crystal report based on a Oracle stored procedure and ODBC driver. This report is published on a Business Objects Server XI Release 2.
In trying to figure out why the report was having efficiency issues, I have modified the procedure to write to another table so I can see what is happening in the report. After executing the crystal report, I found that the procedure is called THREE times. Here is the output from the table that I write to after the Crystal Report is executed from Enterprise:
           0 DEBUG - 28-JUL-2008:09:43:50: Starting STPR
         100 DEBUG - 28-JUL-2008:09:43:52: Done with 1
         240 DEBUG - 28-JUL-2008:09:43:52: End Program - Right after opening Cursor
         240 DEBUG - 28-JUL-2008:09:43:52: Right before opening Cursor
           0 DEBUG - 28-JUL-2008:09:43:53: Starting STPR
         100 DEBUG - 28-JUL-2008:09:43:55: Done with 1
         240 DEBUG - 28-JUL-2008:09:43:55: End Program - Right after opening Cursor
         240 DEBUG - 28-JUL-2008:09:43:55: Right before opening Cursor
           0 DEBUG - 28-JUL-2008:09:43:56: Starting STPR
         100 DEBUG - 28-JUL-2008:09:43:58: Done with 1
         240 DEBUG - 28-JUL-2008:09:43:58: End Program - Right after opening Cursor
         240 DEBUG - 28-JUL-2008:09:43:58: Right before opening Cursor
When calling the report directly in Crystal, I get mixed results, sometimes it is the same, sometimes the procedure is called once but I see debug lines for the first two of the four rows in the second call and sometimes it is only called once.
Is there something that can make sure the procedure is called once and only once. We are running into database efficiencies.
Thanks!

Cisco Agent Desktop software running multiple times in Task Manager

Similar Messages

Maybe you are looking for