Cisco support for the UK DASS signalling protocol on CCME ?

I have a client who currently has an old Meridian PBX that has a DASS (G.703) connection to the PSTN with 9 channels. I wish to replace this with a 2821-CCME.
Does Cisco support PSTN connectivity with DASS/G.703 using CCME and a VWIC2-1MFT-G703? If so can you please point me to any configuration guides.
Thanks in advance,
Gordon.

mchandak,
Honestly I don't know what makes you believe that.
1) the main protocol/standards used on ISDN PRI are from bottom to top, G.703, G.704, Q.921 and Q.931, no matter if you have H.323, SIP, MGCP or SCCP as VoIP signaling protocol.
2) CCME can perfectly "control" a gateway using any of above protocol except MGCP.
3) In the original question, there is no gateway/backend, just one single CCME router.

Similar Messages

Ask the Expert: Cisco TelePresence for the Enterprise

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Telepresence® for the enterprise.
Cisco experts Jaret, Fernando, and Fred will be covering all Cisco TelePresence products. Topics include Cisco TelePresence endpoints and TelePresence infrastructure such as the Cisco TelePresence Video Communication Server (VCS), Cisco Expressway Series, Cisco Unified Communication Manager (CallManager), Cisco TelePresence Servers (MSE 8710, on Virtual Machine, etc.), MCU (MSE 8510, etc.), Cisco TelePresence Management Suite (TMS), and all other Cisco TelePresence related devices.
Jaret Osborne is an 8-year Cisco Advanced Services veteran. In his Advanced Services tour, Jaret has covered all aspects of Cisco Unified Communications and TelePresence products, including both enterprise and service provider verticals. Most recently Jaret has been working with global service providers supporting their Cisco TelePresence as a Service offerings while also incubating new cloud services at Cisco.
Fernando Rivas is a Cisco Advanced Services NCE, starting in the Cisco Technical Assistance Center (TAC), 2007, on the Collaboration Technology Team mastering the Cisco Unified Communication technologies and specialized in call control CUCM,VCS) and conferencing (MeetingPlace, Telepresence). In 2011, he joined Cisco Advanced Services as a member of the Cisco Collaboration team and participated in several Cisco TelePresence and video-related technologies deployments. Currently he is a member of the Video Cloud Technology Team, supporting video exchanges in several and architecting new private video cloud solutions for large enterprises. Fernando holds a routing and switching CCIE® certification (22975).
Fred Mollenkopf is a Cisco Advanced Services Network consulting engineer working at Cisco for the last 7 years. Fred has led some of the largest Cisco Unified Communication and Collaboration deployments done for Cisco customers and partners. Over 15 years’ experience in data networking with a specialization in Cisco Unified Communications in 2004. Currently he is a member of the SP Video Advanced Services Team, supporting SP video exchanges and the Cisco Telepresence solutions. Fred maintains an active CCIE® in Voice (17521).
Remember to use the rating system to let Jaret, Fernando, and Fred know if you have received an adequate response.
Because of the volume expected during this event, Jaret, Fred, and Fernando might not be able to answer every question. Remember that you can continue the conversation in the Collaboration, Voice and Video Community, under the sub-community TelePresence, shortly after the event. This event lasts through August 15, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Tenaro,
Additionally here are the most common login issues. Unfortunately this includes items related to Presence implementation but I commented where we did not use these in our lab setup for CUCM Phone Capabilities only.
Login Issues
Problem:
Jabber Unable to Sign-in Through MRA
Solution
This can be caused by a number of things, a few of which are outlined below.
1. Collaboration Edge SRV record not created and/or port 8443 unreachable
For a jabber client to be able to login successfully using MRA, a specific collaboration edge SRV record must be created and accessible externally. When a jabber client is initially started it will make server DNS SRV queries:
_cisco-uds : this SRV record is used to determine if a CUCM server is available.
_cuplogin : this SRV record is used to determine if an IM&P server is available.
_collab-edge : this SRV record is used to determine if MRA is available.
If the jabber client is started and does not receive an SRV answer for _cisco-uds and _cuplogin, and does receive an answer for _collab-edge then it will use this answer to try to contact the Expressway-E listed in the SRV answer.
The _collab-edge SRV record should point to the FQDN of the Expressway-E using port 8443. If the _collab-edge SRV is not created, or is not externally available, or if it is available, but port 8443 is not reachable, then the jabber client will fail to login.
2.  Unacceptable or No Available Certificate on VCS Expressway
After the jabber client has received an answer for _collab-edge, it will then contact the expressway using TLS over port 8443 to try to retrieve the certificate from the expressway to setup TLS for communication between the jabber client and the expressway.
If the Expressway does not have a valid signed certificate that contains either the FQDN or domain of the Expressway, then this will fail and the jabber client will fail to login.
If this is occurring, the you should use the CSR tool on the Expressway, which will automatically include the FQDN of the expressway as a Subject Alternative Name.
MRA requires secure communication between the Expressway-C and Expressway-E, and between the Expressway-E and external endpoints.
Expressway-C Server Certificate Requirements:
The Chat Node Aliases configured on the IM&P servers. This is required if you are doing XMPP federation. The Expressway-C should automatically include these in the CSR provided that an IM&P server has already been discovered on the Expressway-C.
The names in FQDN format of all Phone Security Profiles in CUCM configured for TLS and used on devices configured for MRA. This allows for secure communication between the CUCM and Expressway-C for the devices using those Phone Security Profiles.
Expressway-E Server Certificate Requirements:
All domains configured for Unified Communications. This includes the domain of the Expressway-E and C, e-mail address domain configured for Jabber, and any presence domains.
The Chat Node Aliases configured on the IM&P servers. This is required if you are doing XMPP federation.
The MRA Deployment guide describes this in greater detail on pages 17-18. (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Mobile-Remote-Ac...
Note: In our lab for testing Phone Capabilities only, we did not include the Chat Node Aliases in the certificate as we were not using IM&P.
3.  No UDS Servers Found in Edge Config
After the Jabber client successfully establishes a secure connection with the Expressway-E, it will ask for its edge config. This edge config will contain the SRV records for _cuplogin and _cisco-uds. If these SRV records are not returned in the edge config, then the jabber client will not be able to proceed with trying to login.
To fix this, make sure that _cisco-uds and _cuplogin SRV records are created internally and resolvable by the Expressway-C
More information on the DNS SRV records can be found on page 10 of the MRA deployment guide for X8.1.1 (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-1-1.pdf)
Note: In our lab for testing Phone Capabilities only, we did not include the DNS SRV for _cuplogin.
4.  The Expressway-C logs will indicate the following error: XCP_JABBERD Detail="Unable to connect to host '%IP%', port 7400:(111) Connection refused"
If Expressway-E NIC is incorrectly configured, this can cause the XCP server to not be updated. If the Expressway-E meets the following criteria, then you will likely have this issue:
Using a single NIC
Advanced Networking Option Key is installed
Use Dual Network Interfaces option is set to “Yes”
To correct this problem, change the “Use Dual Network Interfaces” option to “No”
The reason this is a problem is because the Expressway-E will be listening for the XCP session on the wrong network interface, which will cause the connection to fail/timeout. The Expressway-E listens on TCP port 7400 for the XCP session. You can verify this by using the netstat command from the VCS as root.
Note: We used a Dual Network Interface Expressway for testing but were not using XCP, so this was not applicable to us.
5.  VCE-E Server hostname/domain name does not match what is configured in the _collab-edge SRV.
If the Expressway-E Server hostname/domain name does not match what was received in the _collab-edge SRV answer, the jabber client will not be able to communicate to the Expressway-E. The Jabber client uses the xmppEdgeServer/Address element in the get_edge_config response to establish the XMPP connection to the Expressway-E.
This is an example of what the xmppEdgeServer/Address would look like in the get_edge_config response from the Expressway-E to the Jabber client:
<xmppEdgeServer>
<server>
<address>ott-vcse1.vcx.cisco.com</address>
<tlsPort>5222</tlsPort>
</server>
</xmppEdgeServer>
To avoid this, make sure that the _collab-edge SRV record matches the Expressway-E hostname/domain name. Enhancement CSCuo83458 has been filed for this.
Note: This was one of our issues when we first setup. We adjusted our Expressway-E to insure the below:
System > Administration > System Name this was the FQDN
System > DNS > System Host Name was the host portion of the FQDN
System > DNS > Domain Name was the domain portion of the FQDN
System > Clustering > Cluster Name (FQDN for Provisioning) was the FQDN
6. Unable to log into certain IM&P servers. VCS logs say "No realm found for host cups-example.domain.com, check connect auth configuration"
From the Expressway-E, go to Configuration -> Unified Communications -> IM&P Servers. Open each server and click "Save" again. Not sure exactly why this happens.
Note: This was N/A to our test and can be ignored with Phone Capabilities only.
Thanks
Fred

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.

Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.
I have had to erase my disk since then with trouble with Apple Store not recognising my machine and the reload from Time Machine has given complications . Can you please cancel my trial and return my Trial money.

If you paid for what you used then it was not a trial.
Look thru the following links and use the chat option if required for your situation:
Cancel your membership or subscription | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
https://forums.adobe.com/thread/1703848
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Why no RAW support for the Fuji FinePix HS10?

This camera is well over a year old. Why is there no support for the RAW file?

It is definitely not only Fuji. I used a Panasonic Lumix FX-150 before that has been supported by Adobe Camera Raw for quite some time now. I replaced that camera by a Lumix LX5, but I see that the FX-150 is still not supported by Apple Camera Raw and probably never will.
If you want wide range RAW support, use Lightroom. (Not to say that Aperture doesn't have its strengths, e.g. support for geocoding.)

Why no support for the Leica M9 in LR 2.6 RC?

Hi - bemused that there's no support for the M9 in this release (especially as LR is bundled with the M9). Even more confusing as the Standard Adobe calibration profile for the M9 that comes with the LR3 Beta is pretty good (beats the embedded profile that comes with the Leica DNGs) - and this can be added to the LR2.5 profile library with a bit of copying and pasting.
I'd be grateful to hear from Adobe if there's any chance of a good M9 profile making it to the 2.6 final version. Seems a shame to miss this opportunity.
Thanks
Chris Tribble

Hello Chris,
thanks for the nice feedback.
For the moment, I will use LR for the fast preview of all images,
cataloging etc., and RawDeveloper for the fine tuning, as often as the
image permit it.
(sorry for my english!)
Lets hope that we will get through all that without loosing our
perfectly nice temper !
All the best to you,
Alain
Le 11 déc. 09 à 09:39, Chris_Tribble a écrit :
Alain - 1eme - je suis un particulier - aucun fonction chez Adobe.
Aussi -
je m'excuse d'avant pour mon Francais bottant et sans elegance! Je
n'ai
jamais fais des etuded en francais - et aussi mon clavier anglais
manquent
les diacritiques...
>
Quelque petit reponses.
>
>>>> First I have installed the 2.6 version, that is said to work
>>>> alongside the 2.5... but of course, it has replaced it. How to
>>>> reinstall the 2.5 alongside, hase they have the same name ?
>>>
>>> C'est pas la peine - 2.6 est meilleur - vous pouvez rester
>> avec ca...
>
>> ok, mais c'est tout de même juste le contraire de ce que
>> disent sur le site Adobe vos notes d'installation (rien de
>> très neuf non plus en cette matière, hélas, quant aux infos
>> approximatives ou manquantes d'Adobe)
>
CT: Pas vrais je crois - Version 3 beta peut co-exister - mais 2.6
doit
remplacer 2.5...
>
>>>> And then, I have tried to find a M9 profile, read your
>> posts, do my
>>>> job, install the beta 3.0, fond the "M9 Digital Camera Adobe
>>>> Standard.dcp", put a copy of that in any cameraRaw description
>>>> files... and so what ? In 2.6, I only have the choice between
>>>> "embeded" (=incorporé in french) and "Adobe standard" when
>> I select a
>>>> M9 dng file / but I've more choice when I select a M8 dng
>> file (ACR
>>>> 4.4, ACR 3.6, Adobe standard, Adobe standard beta 2,
>> camera standard,
>>>> camera standard beta 2).
>>>> 1. Do I miss something ?
>>>> 2. what should I do to find and use the M9 specific profile ?
>>>>
>>
>>>> Encore une fois - il n'y a pas de probleme...
>>> "Adobe Standard" marche tres bien...
>> moui... si vous le dites... mais il me convient assez mal, et
>> j'aimerais tout de même comprendre pourquoi je ne peux pas
>> charger un profil correspondant à mon M9... je ne comprends
>> pas non plus pourquoi il n'y a pas de profil par optique
>> développé par Leica... et en Suisse, personne de chez eux ne
>> peut répondre à ces questions... alors même que LR 2.5 est
>> livré en bundle avec le m9!
>
CT: Alors - Adobe Standard EST le profil developé par Adobe pour le
M9 - et
c'est le meme qu'on trouve dans LR 3 beta. Selon mon experience c'est
meilleur que le "embedded profile". Pas parfait, mais pas mal non
plus
Vous pouvez vous meme telecharger le DNG editor
(http://labs.adobe.com/wiki/index.php/DNG_Profiles).
>
>
>> je suis professionnel, et très loin d'être heureux avec LR...
>> (ni avec aucun raw developper, pour être franc, ni
>> captureOne, ni... encore que justement, RawDevelopper a des
>> qualités intéressantes - à côté de grande faiblesses... mais
>> c'est encore un autre sujet)
>>
>> mais j'ai bien l'intention de m'accrocher, ne serait-ce que
>> pour la puissance de gestion/catalogage et l'interface de
>> LR... quoi que je n'ai aucune confiance en son bricolage des
>> dng -> donc multiplier les backups des fichiers tels que
>> sortis du m9, etc... on dirait bien que malgré 15 ans
>> d'expérience, nous en soyons toujours au balbutiements du digital !
>>
>> C'est tout de même plus sérieux (du point de vue des
>> résultats) du côté de Leaf (j'utilise un L75 sur Alpa
>> 12SWA)... ça ressemble à quelque chose, mais en petit format,
>> après le m8, le m9 est vraiment encore loin du compte ! Et
>> leur développeur, bien sûr, ne développe... que leurs
>> fichiers propriétaires. Lorsque quelqu'un aura décidé dans
>> quelques années que leur format .mos est dépassé, mon travail
>> sera tout simplement perdu. Sauf à convertir en catastrophe
>> quelques dizaines ou centaines de milliers de fichiers ?
>> Encourageant, n'est-ce pas ?
>>
>>> By the way, I also had this blue pixels lines in the 2500iso
>>>>
>>>> files... anyway to save back the file without this bug ?
>>>
>>> Je ne vois pas cette image .... Peut etre vous pourriez
>> m'envoyer par
>>> email? (mailto:mailto:mailto:[email protected])
>> Je ne l'ai malheureusement pas avec moi, sur mon portable, et
>> n'y accéderai plus avant quelques jours...
>>
>> Leica Suisse (avec qui je suis en relation directe et qui a reçu ce
>> fichier) vient de m'appeler et ils reconnaissent - enfin - le
>> problème.
>> Mais ils ne savent toujours pas si et comment il vont le résoudre.
>> Rien avant l'année prochaine, quoi qu'il en soit, et ce sera
>> fixé, selon eux, soit :
>> - par un nouveau firmware (difficile à croire)
>> - par un passage de l'appareil entre leur mains, avec modif/
>> remplacement d'une partie du soft/hardware
>> - par un échange d'appareil (!!!) si c'est le capteur qui est
>> en cause (l'un de mes M8.2 avait été échangé de même à leur
>> frais après 3 mois, pour d'autres problèmes électroniques) Le
>> problème de ces lignes de pixels bleus sur certaines prises
>> de vue en haute sensibilité est largement débattu sur les
>> forums, et Leica vient de comprendre qu'il n'est pas
>> extérieur au M9, comme ils le disaient il n'y a pas si
>> longtemps... encore une petite bombe à leur actif !
>> Dite-moi si ça vous intéresse et je vous les ferai suivre...
>
CT: J'avais un tel probleme avec le M8.2 - chez le M9 pour le moment
ca
marche!
>>
>> Par ailleurs, ils viennent de me proposer de repasser toutes
>> mes optiques au banc (codées par leurs soins il y a moins
>> d'un an) pour les ajuster une nouvelle fois au mieux au m9...
>> là aussi, ils reconnaissent des failles techniques sérieuses
>> ! J'ai par exemple un summicron 35 asph parfait sur film et
>> sur m8, qui est... flou (sur les bords, et irrégulièrement)
>> sur mon m9 ! Interressant...
>>
CT: c'est vrais que les boittier numerique sont plus exigeant - je
conseil
un contact direct avec Leica a Solms.... Et aussi (si vous n'y etes
pas
inscrit deja) que vous faites appelle pour rejoindre le reseau Leica
Professional. Ca vaut la peine et augment le vitesse de reparation...
>
>>> Je vous conseiller aussi de visiter L-camera forum...
>>> (http://www.l-camera-forum.com/leica-forum/leica-m9-forum/
>>> ) Vous y trouverez des francophones la bas et il y a beaucoup de
>>> bonnes informations...
>> je connaissais, mais les questions en français trouvent
>> rarement de l'écho... et le niveau technique n'est
>> malheureusement pas très élevé, malgré la gentillesse des
>> interlocuteurs.
>>
>
Oui! MAIS j'ai appris des choses la bas ...
>
>>> Bon courage!
>>> Chris
>>
>> Il en faut, en effet...
>> merci en tout cas !
>> (à propos, quelle est votre fonction chez adobe ? Puis-je
>> reprendre contact avec vous lors de mes prochaines
>> découvertes ?) Amitiés, Alain
>>
Encore une fois - bon courage..
>
Dr Christopher Tribble
MOBILE     || +44 (0)7917 473522
EMAIL     || mailto:[email protected]
WEB     || www.ctribble.co.uk
>

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet?

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet? Am I wrong or was support for the D810 available far more quickly?

ACR 8.7 has not yet been released. The ACR 8.7RC has been released. It is a Release Candidate - and as such, is not a final version. I wouldn't be concerned about a lack of Lightroom support until a final version is released.
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

When is LR5 going to add support for the Lumix DMC-LX100?

Is there a date for the release of LR support for the Lumix DMC-LX100?

Anyone who knows is not allowed to say. And anyone who gives you a date doesn't know. Adobe doesn't make announcements about new versions in advance.

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

Is XA transactions supported for the SOA Suite 10.1.3.4 on weblogic platfor

There are 2 weblogic domains 1 & 2. Domain 1 hosts the JMS queue and domain 2 hosts the BPEL process. The BPEL process in domain 2 uses JMS adapter to get messages from domain 1. With queues on Weblogic domain 1, is XA transactions supported for the SOA suite 10.1.3.4 BPEL process JMS Adapter on weblogic domain 2?

There are 2 weblogic domains 1 & 2. Domain 1 hosts the JMS queue and domain 2 hosts the BPEL process. The BPEL process in domain 2 uses JMS adapter to get messages from domain 1. With queues on Weblogic domain 1, is XA transactions supported for the SOA suite 10.1.3.4 BPEL process JMS Adapter on weblogic domain 2?

Implementing Single Sign-On support for the Oracle E-Business suite

Implement Single Sign-On support for the Oracle E-Business suite
I want implement Single Sign-On support for the Oracle E-Business suite.
Operationg System : linux/Solaris
Oracle E-Business suite : 11.5.10
Oracle Application Server : 10gAS(latest availble)
Type of integration : SSO and OID with 11i
No third party SSO or LDAP
Qusetions
1.If my SSO Server is down can i login to applications(11i) using normal mode(default login http://servername.xxxx.com:8000/).
2. Is it possible to have appilications (11i) in Linux/Solaris and 10gAS in windows.
Please answer...
NOTE:
I am following Oracle METALINK Doc.Id 233436.1 and 261914.1.
Thank you.
MARK

You couldn't login into server But You can use the following login
http://servername.xxxx.com:8000/AppsLocalLogin.jsp
For this you need to enable the Appslocallogin Profile option

[Consolidation-Locked] Please add RAW support for the Nikon D600 to Lightroom as soon as possible!

My Fair Adobe,
Please add RAW support for the Nikon D600 to Lightroom as soon as possible!
ViewNX lets me get to the images, but come on!!! I know Lightroom, and you, ViewNX, are no Lightroom.
Yes, I see everyone else ASKING for D600 support. I'm here to beg for it! Don't make me wait much longer!
Message title was edited by: Brett N
Message title was edited by: Brett N

Rob, my reading of your site is that this plug-in copies settings from raw to jpeg, does it work the other way around as well?
Rob Cole wrote:
One of the great things about the new 0-based defaults and linear tone curve is:
You can develop the jpegs now, in Lightroom, and then sync the settings to the raws later (e.g. using RawPlusJpeg), and provided you select a matching camera profile, they will look almost the same (white balance won't translate over, but everything else will, more or less). Beware lens corrections applied to the raws might alter the registration of precision local adjustments.
Note: I recommend shooting with ADL off in order for this to work better, and consider turning sharpening off in camera as well, and noise reduction and everything else to whatever extent is possible.
Rob

HT201363 I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

Tether support for the Nikon D750 in lightroom 5

Will there be tether support for the Nikon D750 in Lightroom 5

You are absolutely correct Lightroom does not have tether support for the new Nikon D750. see the list of supported cameras.
Tethered camera support in Lightroom
Nikon need to provide the required sdk info for the camera to enable Adobe to work on adding tether support.

Cisco support for the UK DASS signalling protocol on CCME ?

Similar Messages

Maybe you are looking for