CiscoWorks Nessus scan yellow vulnerability issue

Hi,
Nessus scan reports yellow Vulnerability for our CiscoWorks server:
x.x.x.x (ip address of CiscoWorks server) YELLOW Sybase ASA Client Connection Broadcast Remote
Information Disclosure Locate service enabled on Sybase server
sybaseanywhere 2638
If anyone knows the status for this issue, please let me know.
We have the following CiscoWorks products and version:
(LMS 2.6)
CiscoWorks Common Services 3.0.6
Campus Manager 4.0.6
CiscoView 6.1.5
Device Fault Manager 2.0.11
Internetwork Performance 2.6.0
Resource Manager Essentials 4.0.5
Your help would be greatly appreciated.
Thanks.
GY (Gongyuan Yao)
Contractor (LHC Network Support)
[email protected] 301-435-3168(o)
240-417-1488 (c)

This is CSCsk35018:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk35018
The following two discussions will shed additional light on top of what the Bug Tool provides:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40^1%40%40.2cc0b896/4#selected_message
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cbec487

Similar Messages

NAC Appliance & Nessus Scanning

Hi All,
In the process of getting our NAC appliance setup moved into a production level. We have everything working up to getting Nessus scanning working. I'm a bit confused by the documentation. It appears as though Nessus scanning only applys to web login users... is this correct? The doc shows activating Nessus vulnerability handling under General Setup -> Web Login. I don't see anywhere how to enable it for an agent environment. I have a setup where our test user is placed into the proper roles, and I have selected a Nessus vulnerabilty for that role. I never see the scan happen though. It's as if the agent isn't required to go through vulnerability scanning before being placed into his or her role. Is that correct? Thanks in advance for any help!
-Mike

Paul,
Good to hear from you. I have been rather busy and I'm hoping to get some time in the near future to get the blog updated. The CMPC program I wrote has been quite popular with nearly 400 downloads so far.
Back to the issue of Nessus scans. We're looking good, getting scans done now on the agent side. But I'm trying to test by enabling the TFTP server detected plugin. I have it setup as seen in the attachment. When I test against the workstation, it shows that it detected the TFTP server running. But, when the user logs in with the agent and is placed in that same role, they never are notified they are vulnerable. Why is that?
Thanks for the help so far!
-Mike
http://cs-mars.blogspot.com

Nessus scan on AS 10.1.2.0.2 gives HIGH vulnarabilities

Anyone run into "nessus" scan problems with AS?
I have SSL enabled AS using SSLConfigTool and "nessus" gives below when Secuity scans the server. I have applied the Jan07 CPU to this AS.
Any advise, greatly appreciated.
Scan Results:
nv-video (4444/tcp)
It was possible to kill the HTTP proxy by
sending an invalid request with a too long header
A cracker may exploit this vulnerability to make your proxy server
crash continually or even execute arbitrary code on your system.
Solution: upgrade your software
Risk Factor : High
CVE : CVE-2002-0133, CVE-2002-0133
BID : 3904, 3905, 3904
Other references : OSVDB:6804
Plugin ID : 11715
It was possible to kill the web server by
sending an invalid request with a too long HTTP 1.1 header
(Accept-Encoding, Accept-Language, Accept-Range, Connection,
Expect, If-Match, If-None-Match, If-Range, If-Unmodified-Since,
Max-Forwards, TE, Host)
A cracker may exploit this vulnerability to make your web server
crash continually or even execute arbirtray code on your system.
Solution: upgrade your software or protect it with a filtering reverse proxy

Anyone run into "nessus" scan problems with AS?
I have SSL enabled AS using SSLConfigTool and "nessus" gives below when Secuity scans the server. I have applied the Jan07 CPU to this AS.
Any advise, greatly appreciated.
Scan Results:
nv-video (4444/tcp)
It was possible to kill the HTTP proxy by
sending an invalid request with a too long header
A cracker may exploit this vulnerability to make your proxy server
crash continually or even execute arbitrary code on your system.
Solution: upgrade your software
Risk Factor : High
CVE : CVE-2002-0133, CVE-2002-0133
BID : 3904, 3905, 3904
Other references : OSVDB:6804
Plugin ID : 11715
It was possible to kill the web server by
sending an invalid request with a too long HTTP 1.1 header
(Accept-Encoding, Accept-Language, Accept-Range, Connection,
Expect, If-Match, If-None-Match, If-Range, If-Unmodified-Since,
Max-Forwards, TE, Host)
A cracker may exploit this vulnerability to make your web server
crash continually or even execute arbirtray code on your system.
Solution: upgrade your software or protect it with a filtering reverse proxy

NAC Nessus scanning

Is there a list of the most common plugins used for Nessus scanning in NAC?
Thanks . . .

I did figure it out at the end of the day yesterday. I should have posted then. It turned out to be a layer 8 issue on my part. I had the plugins selected for All and Windows_All was pointing to All but my individual Windows selections, like WindowsXP, where not pointing to the Windows_All so it was working but just didn't have anything selected. Thank you for your reply, Jonathan. These message boards have proven to be a big help.

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Yellow Tint issue

I know this isn't the first thread on the yellow tint issue, but I've had some strange experiences that need to be addressed.
http://lh5.ggpht.com/TLglqt0-RdM/SVlOWBinyjI/AAAAAAAAArM/ZjMXtH60po/s640/P10306192.JPG
See, when I first started using this iPhone (bought it from a friend) it seemed fine. Then moments upon boot, I started noticing this feint flickering, each time it flickered (as it still does) the screen would be "brighter" but not by the normal brightness settings... and it had a yellow tint to it compared side-by-side of my normal other iPhone.
So I explored more, and since they have both already been opened before, I reopened them and tested a theory. If this iPhone has a yellow screen, maybe the screen needs replacing. I take them both apart, swap the screens, and voila!...... still Yellow?! Hmm, so the screens not the problem...
Now I'm even more puzzled, because I'll just be staring at the flickering, so faintly but distinguishable. And if I catch the right moment for a split second it flashes totally normal, then back... its so brief, but does this mean theres software fix potential in this?
I know nothing about what to do next. Apple, the Community, someone point me in the right direction. Obviously the reason I seek help is because these iPhones have been opened before, but only to switch screens and never deeper. Does this honestly count as a warrant breach or can this be considered justifiable to replace a cracked screen on your own?
Thanks for your help!

You are absolutely right there is a difference and I have not read the small print. I'd put money on it tho. That said you may be lucky in that they'll help you even if you have defaced it.
You should find what you need [here|http://manuals.info.apple.com/enUS/iPhone_3G_Important_Product_InformationGuide.pdf].
Here's a snippet from it;
*Repairing or Modifying iPhone*
*Never attempt to repair or modify iPhone yourself. Disassembling iPhone,*
*including the removal of external screws, may cause damage that is not covered*
*under the warranty. iPhone does not contain any user-serviceable parts, except*
*for the SIM card and SIM tray. Service should only be provided by an authorized*
*service provider.*
Message was edited by: gumsie

Oracle vulnerability issue and JavaScript.

I started a discussion in the Muse forum, and also want to ask the question here, regarding the disabling of JavaScript in browsers. That thread is: forums.adobe.com/thread/1140485. My basic question is this: is there a work around, like adding code to HTML editor, as a result of issues associated with disabling of JavaScript in browser. For example, widget and google maps in website are broke when disabling of JavaSript in browser. This is an issue resulting from the Oracle vulnerability issue a few weeks back, where the Department of Homeland Security is recommending the disabling of js in browsers to prevent the rootkit infection on machines. Want is the answer to this issue. I don't mind learning code, if needed, to put in HTML editor. I just need to know what i need to do or learn. Not everybody is going to disable Java or remove it from their machines, but many folks are and have--that is those aware of the issue. Or is the whole issue just a big bogeyman?

Yes, thank you kenneth_rapp. Note another response in Muse forum and my reply to basically this same question, which produced the same answer. You'll note, where my confusion began. See that discussion in muse forum http://forums.adobe.com/message/5017525#5017525http:// provided by member: topelovely. Again, thanks for the response. It caused me to further read and understand the differences.

Yellow Screen Issue Can be Resolved

I have resolved my yellow screen issue and improved my display greatly by doing the following:
Settings>Brightness
Turn Auto Brightness to "Off"
Increase the the brightness by moving the slider to the right.
I had a first gen iPhone and when I saw the display on my 3G- my initial response was - This screen display must be defective. Now I know that the factory setting is just to low and my display is fine.
Message was edited by: lmiksch

So I've heard a bunch of things about how the yellow screen is supposed to be the way it is, which is fine, but does anyone have anything to say about how not all the screens are the same tint? My boyfriend and I both got iPhones yesterday, and each one has a slightly different tinting to it.
There are (at least) two versions of the firmware, with slightly different colors.
<http://www.macrumors.com/iphone/2008/07/13/iphone-3g-firmware-update-fixes-yell owing-of-screens/>

Potential 'yellow tinge' issue on 2012 27" iMac

Hi,
I feel a little silly for posting this but I am after some reassurances!
Last week, I purchased a 'Late 2012' 27" iMac which, having checked the serial number, I believe was built earlier this year.
When viewing mostly light coloured pages/applications, I have noticed that the bottom half of the screen looks a lot warmer than the rest. Even though I only noticed this a few days ago, I've convinced myself that this is the dreaded 'yellow tinge' issue, even though it looks like this only affected earlier iMacs.
My concern is that if I take it back, (not easy), I will look ridiculous and get told that this is intended behaviour. To that end, even though it's not a great photograph, what do people think:
In fairness, the photograph enhances the tinge somewhat but the distinction between the top and bottom of the screen is definitely there.
Please, reassure me!
Adam

Welcome to Apple Support Communities
Take it back as many times as necessary. It's a common issue with iMacs since the Late 2009 iMac and hasn't been completely fixed since then. Apple will give you a new iMac, and if it has got the same problem, return it again and you will receive another iMac

CSS and Nessus Scans (SSH vulernability)

I have a CSS 11503 running 8.20.3.03. I have performed a Nessus vulnerability scan against the CSS. The scans have shown vulnerabilities against SSH. It is reporting that we need to upgrade to OpenSSH version 5.0 or later.
If I upgrade to 8.20.5.01 will that address this issue? I looked thru the caveats for the other code versions and I do not see that being addressed as an issue or a fix.
If not is there something else I can do address this issue?
Any help would be appreciated.

Cesar,
The scans identified a few vulnerabilities,
CVE-2002-0639
CVE-2002-0640
CVE-2003-0682
CVE-2003-0693
CVE-2003-0695
CVE-2002-0575
CVE-2002-0083
CVE-2003-0386
CVE-2008-1483
I noticed that you state that 8.20.5.01 runs OpenSSH_3.0.2p1. This is the same SSH that 8.20.3.03 is reporting. So upgrading does not look to be a solution.
Side note I am not leveraging the Web NS function. I just SSH or console into the CSS.

ACAS Nessus scans of Cisco devices

Hello, we have an ACAS configuration with Security Center and Nessus scanner running on RHEL 5.10.
Our infrastructure consists of WS-6509, WS-3750X's, G's and some old E's.
We configured Nessus scanner with the proper Username/Password/Enable Password combinations.
At this time it will scan one 3750 switch but none of the other 130 devices.
If I attempt to ssh into a device from Nessus server it fails either a connection refusal from the device on port 22 or it doesn't like the cipher choices.
I checked the switch that it does access against the others and found ip ssh authentication-retries 4 was configured and some SNMP settings that don't exist in the switches that can't be scanned.
Anyone have this issue?
ej

Hello,
You may find useful Pretty Good Terminal http://www.prettygoodterminal.com which has recently been published. This software is more about device management (via ssh/telnet) in large scales and through several jump server hops, than a terminal application. It was developed by me when I was given a task to configure more than 50000 CPE routers.So this software is a response to a real challenge and it is a good fit to collect device information.
Regards,
Laszlo

Laserjet pro 200 color mfp m276nw Scan to Email issue

My laserjet pro 200 color mfp m276nw claims email is not set-up. I have entered in the e-mail addresses to send the scans to, but it still claims it is not setup. How do I setup this feature? I already have the "Send an Email" feature working where it sends the scan "from" my e-mail, but I want to use the Address Book feature and just send to a specific e-mail.

HI @Username57 ,
I see by your post that you what to setup the scan to email on the printer. I would like to help you out with this issue today.
I have provided a document for How to Scan: From the Control Panel. Select Scan to an email.
If you are still having issues then go into the printer's Embedded Web Server by typing in the printer's IP address in your web browser and setup a Static IP and set the DNS address.
Click the Network tab, then click on IP4 config on the left side.
Click on Network Address (IP)
Select Manual.
Type in the printer's information and IP address.
Set the DNS Address Configuration as Manual. Under Network Information, it looks like you can change the settings there.
Set the preferred address as 8.8.8.8
Set the Alternate address as 8.8.4.4 and confirm the changes.
Try setting it up again.
If you need further assistance, just let me know.
Happy New Years!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

ImageFORMULA P-215 Scan-tini Software Issues with Windows 8.1 32-Bit Laptop

Hi,,
I have a ImageFORMULA P-215 Scan-tini scanner which worked without any problems with my Lenovo X230 laptop running Windows 7 64-bit. However, I have been unable to get the CaptureOn Touch software to work on my Asus Transformer TA100T notebook running Windows 8.1 32-bit. The software and driver installation completed without any errors (without the scanner connected). But when I connect the scanner into the USB port and run the Capture On Touch software, it always comes up with a Microsoft Visual C++ runtime library error - Program C:\Program Files\Canon Electronics\P215\TouchDR.exe abnormal program termination.
I tried every possible troubleshooting approaches I could Google online including (1) doing running sfc /scannow (which found no integrity or corruption issues with my Win 8.1 system, (2) did a clean reboot disabling everything except the CaptureOn Touch software and it still comes up with the same error, (3) installing Visual C++ runtime library distributables for 2005, 2008, 2010, 2012, 2013 but still the error pops up. So basically, now I can't use this great little portable scanner with my great little transformer tablet/notebook.
I am wondering whether anyone else have come across a similar problem of getting this scanner to work on a 32-bit Win 8.1 system? Would greatly appreciate any advise.

Hi:
I would try the Vista audio driver from your notebook's support and driver page.
the dv6000 model series is not supported by HP for W7 let alone W8 or 8.1.

CiscoWorks Nessus scan yellow vulnerability issue

Similar Messages

Maybe you are looking for