CiscoWorks RME 4.1.1 - CRIN0014 Error

Hello,
Not sure when this started, but I noticed the following error when trying to go to the report generator in RME:
CRIN0014: Operation failed while connecting to JRM. Make sure jrm and/or CTMJrmWrapper services are running.
I went and made sure all that I downloaded and applied all patches available to Common Services and RME and this did not do anything. The server is connected to ACS and I re-joined them and re-registered all my applications. The other thing I am noticing is when I go to do practically anything in RME that involved the device selector RME shows 0 devices, but in the RME home page I see all 900+ of my devices listed as "normal".
This is a weird issue that just came out of nowhere. Has anyone seen behavior like this in the past? Not sure what I would need to post as far as log files, etc. but I can provide them as needed.
Any help would be appreciated.
Thanks,
AJ Schroeder

AJ,
With this version of RME you MAY be hitting bug CSCte49301. Based on the release note there is a workaround you can try (see below):
--Workaround
Shutdown CiscoWorks Daemon Manager with the following command from the server's command prompt:
net stop crmdmgtd
Delete the following two files:
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry.backup
Restart CiscoWorks Daemon Manager with the following command:
net start crmdmgtd
If that does not work, then the Windows Remote Management service must be stopped, and disabled. Then, CiscoWorks Daemon Manager must be restarted.
It also could be a permission issue with teh system identity user and its permission on ACS. Ensure the system identity username is configured in ACS with full access privileges in the Ciscoworks "Shared Profile" components.
Rob

Similar Messages

Ciscoworks - RME 4.3.1 Sotfware distribution needs 32MB minimum in Flash

Hello,
I’m having the need to upgrade over one hundred Cat2900 to a newer image. When I run the software distribution application on Ciscoworks (RME 4.3.1) I get the “catastrophic” warning described below. The new image is only 7MB and there are 22MB free in flash. Is there any way to by-pass this requirement checking???
Catastrophic - SWIM1200: Selected Flash partition requires minimum (32 MB) to upgrade selected software/image. Select a different Flash partition for upgrading the image.
test3#show flash:
Directory of flash:/
   2 -rwx         616   Mar 1 1993 00:00:28 +00:00 vlan.dat
   3 -rwx       2861   Mar 1 1993 00:04:24 +00:00 config.text
   4 -rwx           5   Mar 1 1993 00:04:24 +00:00 private-config.text
   5 drwx         512   Mar 1 1993 00:10:44 +00:00 c2960-lanbase-mz.122-35.SE                   5
27998208 bytes total (22688768 bytes free)
-rwx------+ 1 Administrators None 7075041 2011-06-30 13:17 c2960-lanbasek9-mz.12
2-44.SE6.bin

Hi,
Try the below steps and I hope this should work:
1- Go to RME > Software Management > Software Repository
2 - Select the image you are trying to push (Click on the file name)
3- Change the Minimum RAM to a lower value than the RAM you have on the
device
4 - Click on Update
5 - Try the SWIM job again
Thanks
Afroj

CiscoWorks RME 4.3 syslog forwarding

Hello,
We are running CiscoWorks RME 4.3 and forwarding syslog messages to another syslog server. To forward messages we use script from https://supportforums.cisco.com/docs/DOC-11592
All is working great at the begining of month. With growing of syslog.log file, forwarded messages are delayed more and more. Because of Syslog Analyzer monthly reports we have log rotate at every 1st day of month.
So question:
Is it possible to write syslogs to two different files? One which will rotate as described above, and other which will be used by syslog_forward.pl and rotated every day?
Thanks in advance!
Regards!
Marko

You cannot do this on Windows with the LMS syslog server. All messages will be written to one file. Logrot in LMS can archive the log files instead of just rotating them. This way, you can keep messages as long as you want. Just specify a non-zero number of backups when configuring Log Rotation. The archived files will be created with a numeric extension (e.g. syslog.log.1, syslog.log.2, etc.). Those files can be further archived manually to long-term storage.

Ciscoworks RME 4.0 SNMP Config Change

Hi,
I was locked out one of my routers. I cannot access it via Telnet, SSH, TFTP, SCP, etc. However, I remembered once I reconfigured the router via SNMP community string. Does anyone know how I can change router config via SNMP community string using CiscoWorks RME 4.0?
Thanks!

You can use RME ---> Config Mgmt --> NetConfig --> NetConfig Jobs . For specific steps, read the users guide below for information about different user defined task you can use.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.0.5/user/guide/netcfg.html#wp1134190

CISCOWORKS - RME netconfig error

When I go to RME>Config Mgnt>NetConfig>User-Define Task i receive the follow error:
CFG0053: No User-defined tasks are available.
I don't can do any configuration.
the version of RME is 4.1.1 and the licence is for 100 equipments, I must update the module? or someone know why appear this error?

I think the problem is more serious
as seen, does not allow me create any task: in the menu, "Tasks" on the left can not deploy any device.
When i go create a task in RME>Config Mgmt>Netconfig>Netconfig jobs i cant not select ALL the devices as shown in the picture below: the host ING_C58_Sw_P2_03 can not choose, instead the other can choose
which will be the cause?

Ciscoworks RME - RICS001 error

Hello fellow forum members!
We have a problem with RME.
Inventory collection from a WS-C6513 switch is failing.
The error is,
RICS001 error - internal error
Info about the switch,
WS-C6513
ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)
And the corresponding ICServer log,
[ Fri Sep 02 10:40:58 CEST 2011 ],ERROR,[Thread-17],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,455,
java.lang.NullPointerException
    at com.cisco.nm.rmeng.inventory.ics.invdata.containment.ContainmentAGInvData.compare(ContainmentAGInvData.java:103)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processContainmentAG(InvDataProcessor.java:860)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:329)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:915)
    at java.lang.Thread.run(Thread.java:595)
[ Fri Sep 02 10:40:58 CEST 2011 ],ERROR,[Thread-17],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,927, Exception occured in process method while processing: 172.18.194.254 null
ICSException
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:470)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:915)
    at java.lang.Thread.run(Thread.java:595)

Hi,
Kindly Enable the Debugging for Inventory and send me the log files:
If LMS 3.2:
Go to RME > Admin > System Preferences > Application Log Level Settings under Application select ICServer
If it is LMS 4.0 : Go to
Admin >debug settings > Config and Image Management Debugging settings >>
Application Log Level Settings under Application select ICServer
Change the Logging level to DEBUG for all the Modules > Click Apply
Then ran a new Inventory Job and send me the IC_server.log   (Location : NMSROOT\CSCopx\Log)
In the meantime try to Increase the SNMP Timeout and RETRY ,if you have not tried this yet:
LMS 3.2:
go to RME>Admin >system prefernece >RME device attributes :
LMS 4.0 :
Admin > Collection Settings > Inventory > Inventory/Config Timeout and Retry Settings
change the SNMP time out to 14 and SNMP RETRY to 3
and ran the job and see how it works !!!
Thanks
Afroj

CiscoWorks RME - Telnet Failed

We are trying to create an archive of our device configs. When we try this we get the following error:
TELNET: Failed to establish TELNET connection to 10.0.8.2 - Cause: Authentication failed on device 3 times. PRIMARY-RUNNING config Fetch Operation failed for TFTP. SSH: Failed to establish SSH connection to 10.0.8.2 - Cause: Authentication failed on device 3 times. Failed to fetch config using RCP.Verify RCP is enabled or not.
CiscoWorks LMS 3.2, RME 4.3
The following config is on the router:
line con 0
login local
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
line vty 5 15
Not sure what to do to fix this.

Remote into the LMS server, and from there make sure you can telnet into this device. If so, you need to enter the same credentials you just used to telnet to this device under CS > Device and Credentials > Device Managment > Edit Credentials. Enter the proper username and password under "Primary Credential". Then try to backup the configuration once again.

RME Hardware Inventory Report gets Error: Report Could Not be Found

LMS 3.2
RME 4.3.0
When running Inventory Hardware report I select all devices and it shows the correct number of devices selected
However, the report is missing all routers, and I get the error message Report could not be found.

Can someone tell me how to open this as a SUPPORT CASE that someone will actually help solve?
Sorry to say but I don't find these forums of much use.

Using CiscoSecureACS with CiscoWorks-RME

I need help in configuring CiscoWorks to use CiscoSecureACS for login authentication. I have specified TACACS+ as the login module. I am able to login with a account from the ACS server. However, the permissions aren't configured correctly. When I login with the ACS server account, options aren't displayed (e.g., under RME, Administration, Inventory, Add Devices...the Add Device option isn't present). Please advise.

To be succinct, ACS doesn't have all the fields that are required by Ciscoworks. That is why you still need to define the user profiles in ACS.
ACS is simply an authenticator. Ciscoworks still handles authorization. Look at the fields available in Ciscoworks and you'll see there are a number of roles that each user can take. I suppose Cisco may someday include extensions in ACS to handle the specific CiscoWorks profile fields but that isn't the case today.
I think the advantage to using ACS is the centralized authentication. Users don't have to change their passwords in multiple places. Logon violations are recorded in one place.
You'll find that once you define the profiles in CiscoWorks they will remain quite static.

Old devices in Ciscoworks RME

I'm using LMS2.6. RME is version 4.06. I have a number of devices show up in my reports that no longer exist. I can't delete them as they don't appear in the DCR. When I try to add them back in, I get an error saying they already exist.
Can someone please tell me where I can delete these old devices?
Thanks!

I have finally found the answer after hunting high and low.
https://supportforums.cisco.com/thread/174743.pdf
Once I added the devices into ACS, they appeared in my DCR so now they can be deleted

Ciscoworks RME Syslog Automation Actions

I set up RME several years ago on our Ciscoworks several running LMS 3.2 to notify us on any BGP flaps via email notification.
I noticed the last couple maintenance period where we had perform Circuit work with our ISP's. We haven't received any emails....I verified those
routers are configured to send notifications in the Device Selector and even checked the router logs.
004161: Nov 20 05:04:52 EST: %BGP-5-ADJCHANGE: neighbor X.X.X.X Down BGP Notification sent
004162: Nov 20 05:04:52 EST: %BGP-3-NOTIFICATION: sent to neighbor X.X.X.X 4/0 (hold time expired) 0 bytes
The syslog collector status appears to be normal.....is there anything I need to do the fix this?

Hi,
Are you receiving any emails from your LMS server? If not, navigate to Common Services > Server > Admin > System Preferences to enter your SMTP settings.
Identifying the syslog message is one step but there are more.
AUTOMATED ACTIONS
Set Up
By default, Automated Actions are used to notify via email, using the `sampleEmailScript.pl` as the script to run. If you do not want to use this, you could write or use your own scripts to perform the action that you really want. In this case please note that we do not provide support for any custom scripts if the problem seems to be related to the script that you are using.
You still need the following settings:
1. Select Devices
In *RME > Tools > Syslog > Automated Actions* and click on create and select the devices that you wish to use.
2. Define Message Type
Please give a name to the Automated Action and then click on add to define a message type. In here, please specify the following values:
    Facility: BGP
    Sub-facility: *
    Severity: 5
    Mnemonic: ADJCHANGE
    Description: *
3. Select Automated Action
Select the default script or the script that you wish to use. Please note that this script must be located in the *CSCOpx/files/scripts/syslog* file and needs to have only write/execute permissions for casuser/Administrator in Windows.
This way when a message matching the above is generated, the Automated Action is triggered and this will run the script that you choose and do the commands that it has specified.
Here is an example:
If you verify that your setup is correctly configured then take a look at the smtp.log found under ../CSCOpx/log.
Thanks.

Ciscoworks RME 4.2 rmeng databases

Wondering how I can truncate, purge, rotate etc the SyslogFirst, SyslogSecond, SyslogThird database files.
They are currently huge (14 GB, 12 GB, and 28GB) and I could use the space.

Hi Kristen,
Procedure for cleaning up the db space:
Prerequisite, execute the following commands in the server, under
NMSROOT\CSCOpx\bin:
STEP 1) pdterm RMEDbEngine
STEP 2) pdexec RMEDbEngine
This is to ensure that there are no active connections to the database which is a must for dropping/recreating db space.
STEP 3) I'm attaching a DBSpaceReclaimer.class file. Please copy it to a temporary directory, example: e:\Temp and issue the
Following command:
STEP 4) E:\Program Files\cwlms3\lib\jre\bin\java -cp ;E:\Program Files\cwlms3\lib\classpath;E:\Program
Files\cwlms3\www\classpath;E:\Program Files\cwlms3\MDC\Tomcat\webapps\rme\WEB-INF\classes\;E:\ProgramFiles\cwlms3\MDC\tomcat\webapps\rme\WEB-INF\lib\log4j.jar DBSpaceReclaimer
STEP 5) Restart daemon manger after completion of above task.
For example:
E:\Program Files\cwlms3\lib\jre\bin>java -cp e:\Temp;E:\Program
Files\cwlms3\classpath;E:\Program Files\cwlms3\www\classpath;E:\Program
Files\cwlms3\MDC\Tomcat\webapps\rme\WEB-INF\classes;E:\Program
Files\cwlms3\MDC\Tomcat\webapps\rme\WEB-INF\lib\log4j.jar DBSpaceReclaimer
NOTE: this is one command.
Thanks-
Afroz
[Do rate the useful post]

CiscoWorks won't start after LMS upgrade 3.0 - 3.2 ERROR 502 Bad Gateway in Portal

I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.
The upgrade was successful, with no errors, and all services started.
Can anyone help, and check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.
I add the installation log file;
And tell them that after upgrading to 3.2, you carge the following patches:
LMS321-win-CSCtr77570-0.zip,
cm5.2.1-nt-CSCtw88763-1.0.zip,
lms3.2.1-win-CSCts95764-0.zip,
lms3.2.1-win-CSCts82530-0.zip
in that order.
He added the logs generated by the LMS services Tomcat and Apache

Hi,
Here are the various errors/warning I found while looking through the attached logs.
WARNING:The application that you are installing requires new tasks to be
WARNING:registered with ACS. If you have already registered this application
WARNING:with ACS from another server, you do not need to register it again.
WARNING:However if you re-register the application, you will lose any custom
WARNING:roles that you had created earlier for this application in ACS.
WARNING:Some features in ACS may not work correctly on Dual-stack servers.
Warning: System memory is less than the minimum requirement.This may affect performance.
Warning: Current swap space is less than the minimum requirement. This may affect performance.
WARNING: The available RAM is 4086 MB which is lesser than the required RAM of 4096 MB. User chose to continue the installation
WARNING: Domain Name is not found from TcpIp parameters, setting PX_FQDN same as PX_HOST
INFO: User Selected to Reboot the Machine
Installation Completed at 16:38:06
Nov 23, 2012 7:59:11 PM org.apache.tomcat.util.threads.ThreadPool$ControlRunnable run
SEVERE: Caught exception (java.lang.NoClassDefFoundError) executing org.apache.jk.common.ChannelSocket$SocketConnection@d888c7, terminating thread
[warn] RSA server certificate CommonName (CN) `LOND-CW-MDF-1' does NOT match server name!?
[Fri Nov 23 19:19:46 CST 2012] CMFX - fileLoc is \C:\PROGRA~1\CSCOpx\lib\classpath\md.properties
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort : ajpPort = 9009 and host =LOND-CW-MDF-1
Cookie value is invalid
LTGateway.run(): connection to LWMS failed, trying again, Nov 23 19:22:28
You have a BUNCH of the ChannelSocket$SocketConnection exceptions.
The next step for you:
Check the running processes via cmd line (pdshow -brief).
Check that all processes are running as expected. If they are then take a look at what is keeping ports open on your box (netstat -anob). From above, the reason may be an application occupying a port LMS needs. Also check the Windows error logs.
Check the following services, they should look like:
Ciscoworks ANI database engine :Manual
CiscoWorks Daemon Manager :Auto
CiscoWorks RME NG database :Manual
CiscoWorks Tomcat Servlet engine : Manual
CW VisiBroker Smart Agent :Manual
CiscoWorks Web Server :Manual
CWCS Cmf database engine :Manual
CWCS rsh/rcp service :Auto
CWCS syslog service :Auto
CWCS tftp service :Auto
DFM dfmEpm :Manual
DFM dfmFh :Manual
DFM dfmInv :Manual
4. Log in as the local Administrator (not Domain).
Stop daemons (net stop crmdmgtd)
CSCOpxMDC\Apache\perl ConfigSSL.pl -disable
CSCOpx\MDC\Apache\perl ConfigSSL.pl -enable (Answer when prompted)
navigate to ..\NMSROOT\setup\support
Execute resetCasuser.exe
Start Daemons (net start crmdmgtd) and wait 20 minutes.
Check if condition persists.
5. Check the output of ..\NMSROOT\MDC\Apache\bin>pdreg -l Apache
A couple other things:
Set the server name to be the server name with the domain as well.
Set the primary DNS suffix to match
Modify md.properties & Registry & set PX_FQDN to the above.
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
- HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\ResourceManager\CurrentVersion\Environment
Thanks.

CiscoWorks and Parameterized templates ERROR - Help Joseph:-)

Hi,
I am using CiscoWorks RME 4.3.1 I am trying to use Parameterized templates as explained in this document:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/netcfg.html
Here is my XML file located in the right place: NMSROOT\files\rme\netconfig\cmdFileson the CiscoWorks server:
<DEVICE NAME = 10.60.131.1>
<CMDPARAM NAME = ConfigFile>
<value>TST4CUPE10-Confg-PV.txt</value>
</CMDPARAM>
</DEVICE>
Then in RME I creat a user-defined task as the one you can see there:
Then I create a new job on a device with the parameterized file:
Actually if I put a tick in the Check Syntax I got the following error message:
I don't understand as the value is configured in the xml file as you can see above!
When the job is done I get a status: successful:
But the problem is that nothing has changed on the device cause of the following error:
configure replace bootflash:$ConfigFile force
Error: Could not open file bootflash:$ConfigFile for reading
Here is the result on the screen:
Does anyone knows what could cause this error?
Best regards,
Laurent

Hi Joe,
I have a good news. It is working now after I changed the IP to the hostname as you suggested.
But it was not working even with the hostname because I had a “<” too much.
bootflash:TST4CUPE10-Confg-PV.txt<
So now the file look like that:
bootflash:TST4CUPE10-Confg-PV.txt
Thank you so much for your help! That is fantastic
Best Regards,
Laurent

LMS 3.2 CiscoWorks Daemon Manager does not want to startup in Windows Server 2008 64bit?

I need help concerning the CiscoWorks Daemon Manager that does not want to startup.
I keep on getting the Error 1053. I installed the CiscoWorks LMS 3.2 Evaluation.
I just need the CiscoWorks Daemon Manager started up. I know a solution was posted but the link is invalid.
This was the thread which I found:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cd47f8d/0#selected_message
Could somebody please assist me in this issue.
Thank You
Irvin

Try the below:
1. Select Control Panel -> System and Maintenance -> System.
2. On the left pane, choose Advanced system settings.
3. Under Performance section, choose Settings.
4. Click the Advanced tab.
5. Under Virtual memory section, click Change.
6. Clear the "Automatically manage paging file size for all drives" checkbox.
7. Then Click Custom and specify at least 2048 MB for the min, and at least 4095 MB for the max.
8. Confirm the services are setup correctly. In Windows, go to Start and click on 'Run...'. Type in services.msc and make sure you have the
following services set like this, change accordingly if not:
CiscoWorks ANI database engine: Manual
CiscoWorks Daemon Manager: Automatic
CiscoWorks RME NG database engine: Manual
CiscoWorks Tomcat Servlet Engine: Manual
CiscoWorks Web Server: Manual
CWCS Cmf database engine: Manual
CWCS rsh/rcp service: Automatic
CWCS syslog service: Automatic
CWCS tftp service: Automatic
DFM dfmEpm database engine: Manual
DFM dfmFh database engine: Manual
DFM dfmInv database engine: Manual
10. Reboot after and see if this brings daemons up.

CiscoWorks RME 4.1.1 - CRIN0014 Error

Similar Messages

Maybe you are looking for