CK-7W Won't end call

I have a Nokia 6300 connected via bt to the CK-7W. All works well except the dashboard button won't end calls. My wife has the same problem in her car (CK-7W with a Nokia 7373) Anyone else experienced this problem as Nokia support just say it should work - a little strange as the problem occurs in two different kits with two different handsets.

Problem solved.  Disconnected car battery for 30 seconds, and that was enough to do the trick.
If anyone else has the same problem, this is the answer.  Orange technical services were only interested in charging me a £45 + VAT call out fee.  Doesn't endear you to people when there is a perfectly simple solution like this,
Thanks for reading.

Similar Messages

  • Won't end call, Call Failure, Muting...

    My iPhone works pretty well except for the following:
    1. When I'm done with a call and go to hang up, the screen it is still blank and won't let me touch anything.
    2. When someone calls and doesn't leave a voicemail it says call failure, call failed and when I slide the lever, it automatically calls them back.
    3. When I'm in the middle of a call, the mute button always gets pressed.
    Any advice for any of these?

    I'm having the same issue with not being able to hang up after a call. I'm not using a case, and after a call, my screen wont come back to life after i take it away from my ear. I understand that there is a sensor that turns the touchscreen off when held to your face to avoid unintentional inputs, and i wonder if mine is not working, and if there is a way to test this.

  • Phone App's "End Call" button sometimes hangs and won't press!

    Ever since the 1.4 update, about 1/4 of the time, when I'm trying to end a call, the screen does not react to my finger/button press and it won't end the call! I've also found a few times that it won't press a button (e.g. #1) on a call as well.
    This is a CRITICAL problem.

    TreoAide wrote:
    Hello all;
    I haven't experienced this myself, however are you able to flick the phone card off the screen with no delay? Does this happen when receiving a call while you're doing something else (tweeting, playing a game, etc)? Does it happen on outgoing calls as well? How about while using a headset (wired or Bluetooth) or speakerphone? Also, so far on this thread, I only see Sprint Pre's with this issue. Any Verizon Pre Plus users see this? How about on a Pixi (either flavor)?
    Need some more information for troubleshooting, may also be beneficial to call technical support from a landline phone.
    Hope this helps,
    TreoAide
    I can answer a few of these but not all:
    -It occurs even when it is the only app open (frequently).
    -It occurs on incoming calls, outgoing calls, and voicemail calls.
    -It occurs while using the phone's earpeice, speakerphone, and while using a headset (plugin, not bluetooth, I don't own a bluetooth unit).
    -Essentially, I haven't ended a call *without* this 4-6 second delay a single time since before webOS 1.4.0, and it occurs under a wide range of usage conditions.

  • HT4528 My iPhone 4S won't let me end calls. I have read to restart your phone, but my power button doesn't work so I can't do that. Does anyone have any suggestions.

    My Iphone 4s wont let me end calls. It freezes on the call screen. I can press END CALL many times and try to end it, but it wont end. I have read that I need to restart my phone or turn it off then turn it back on, but my power button doesnt work.  Can anyone help me or give me suggestions. Thank you!

    i think its the assistive touch bc i got that when my home button broke and my lock button is also broken and now it wont let me slid the unlock button, and i shut it down then turned it back on so it automatically showed the keypad and it would only let me press 3 and thats it. i also read a few other topics about it not unlocking and they all used the assistive touch.

  • E61i - can't end call

    I have an E61i and nothing happens when I press the end call button now. I can't hang up on calls anymore without going to the options menu.
    I have the latest version of the firmware. I have a memory card but I removed it and restarted with no effect. I used to be able to just turn my phone off and on and the problem would go away. Now it won't go away.
    Any suggestions

    If your phone warranty is still valid - get it repaired. But I suppose this is not the case... So the only thing I can think of is Hard Reset - dial *#7370# and confirm. But be aware that this will format the device - all data on the phone memory including all applications will be erased.

  • Droid Incredible won't Conference Call - VZW Area Supposed Known Issue

    My Droid Incredible won't connect when you try to add in 2nd call. No one in my area can conference call with their Droids...not even the VZW Store Droid demo models or the reps there who have the Incredible. My friends have tried conference calling with their Droid's with no luck as well. VZW tech says its a known issue, and until Verizon pushes out update to our area - I'm out of luck! The rep said my options are that they can replace my phone with a different phone model or of course I can break my contract. Really? You want me to go to Apple and get your competitor's Iphone?

    With the Droid Incredible I do not have the SEND option once I am connected to the first party. I just have the END CALL button on my screen. I just got off the phone with Customer Service who reviewed the Tech support notes and she said according to the Ticket the issue is my area, and the way the Droid's are designed to conference call. The work around in my area is to hit SEND twice to connect the 2nd party, however she did state, as I can observe, that the Droids do not have the option to hit send on a 2nd call. My friend has a Droid X in my area and he too is unable to conference call. According to trouble ticket they cannot do anything for me. I am out of luck and my only option is for VZW to give me a new model phone, well we all know the only comparable phone is the Droid X which won't help me as it can't conference call either. With what I do, I need to be able to conference call and if I pay $300 for a phone with the feature, I expect Verizon to accomodate me so this just boggles my mind why Verizon isn't working hard to address this issue. So the only other alternative I see is to break contract and move to AT&T and get the Iphone, but I really do love my Incredible so this is a hard decision. Why is Verizon not working to address this issue? Who can I talk to???

  • Cannot End Call on Q10 after upgrading to OS 10.2

    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

    marootz wrote:
    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
    From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

    My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

    Do you have a cellular plan with data and SMS activated?

  • When in phone mode  black screen and no option to "end call" power dwn req

    ok so heres my problem after i updated to 4.0.2 now when i use the "phone" to make recieve call screen goes blank and i loose the option to "end call" then to get outta call i have to press power button and home button to reset i hav already went to itunes and rebooted my phone hoping that would fix it but nope its still jacked up anyone can help?? any ideas

    in phone mode, I face the same problem. I call and then I have to enter a series of numbers to make an international call, but the screen goes blank completely
    This is little bit weird. I am using iphone 3gs; works with other functions, but for the phone. The phone becomes completely useless after I make any call.
    Good that it is still in the 30 day trial period; plan to return it.

  • IPhone not hanging up on "End Call"

    This occurs frequently, about 1 out of every 5 calls I make. When I hit the red "End Call," at the conclusion of a conversation, my phone hangs with it reading, "call ending..." It does not ever read the normal "call ended" and will stay that way until the screen dims. I then have to reboot the iPhone and everything works normally on the iPhone until it happens again within a few phone calls.
    I am running 1.1.1 (3A109a) and have done nothing peculiar to the iphone. (No 3rd-party apps or jailbreak.)
    Just wondering if anyone else is experiencing this…thanks.
    Message was edited by: JKosh

    First thing that you should do is update to 1.1.2. Apple fixed many bugs like that in that patch. Normally its something to do with the call line itself, like if you're phoning a Verizon person or a T-moble machine.
    Do you end the call or does the other person end the call? Try having the other person end the call and see what happens. Also, ask who their provider is and if that doesn't help call AT&T and see what they say.

  • Iphone screen is black when I remove the phone from my ear; can't end call

    This is annoying! It doesn't happen all the time -- only some of the time but at least two times a day. The phone works but it just doesn't show the "end call" option -- or anything for that matter. I can turn it off when I have my headset on but if I don't have the headset on, I have to press the lock key on the top of the phone to get it to do anything. Then it locks, and then when I touch the on button at the bottom of the phone, it shows the display again. Anyone have any ideas or should I take it in?

    Hey jps42247,
    Do you have a protective case on the iPhone? If its covering the Proximity sensor on the iPhone, the iPhone could think the phone is still being held up to your head. In that case the iPhone screen would remain locked so the call could not be ended accidentally.
    If you don't have a case on the iPhone, try resetting or restoring the iPhone.
    http://docs.info.apple.com/article.html?artnum=305743
    http://docs.info.apple.com/article.html?artnum=305744
    Jason

  • Iphone 5 doesn't end call and Siri problems. Need help.

    I can barely open my screen before it closes and when I hit end call--it doesn't. The screen kicks off and goes black--anyone else experiencing this?
    Plus, Siri is acting up and doesn't get the question and the screen goes blank quickly.
    I was switched out for a new phone after all the other issues relating to lack of signal and battery drainage. So, I now have a new phone with a complete new install and now this. I have rebooted to the apple screen--nothing seems to be working to solve this.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If that doesn't help make an appointment at an App,e Store to have your iPhone looked at by a service technician.

  • Ios5.0.1, can't receive calls, can't end call, can't take video!!!!!

    After installed ios5.0.1, can't receive calls, can't end call, can't take video!! The screen become frozen! Any help please? Thx!

    How about going to a corporate store and see if they will let you put your SIM card in a display model. Your number will transfer over with the SIM card. Then if you call your number from your wife's phone or one of store landline phones and the call goes through, you have ruled out the SIM card being the problem.
    You don't have the phone number set to automatically forward to the voicemail, do you?

  • RE CAN'T END CALL IN LUMIA 800

    i can't end call in lumia 800 and battery is also not getting full charged ..........pls help

    @himanshuonly4u
    Whilst the latter issue is addressed in soon to be released 1600.2483.8107.11501 the former has only so far produced the response "reset" your device or renew SIM which seems rather fallacious, as Lumia 800 one of the first devices bar iPhone to utilise microSIM and neither of which seem to address this issue if your device is so affected.
    Happy to have helped forum with a Support Ratio = 42.5

  • Can't end call on iPhone

    At the end of a call my iPhone screen is dark and doesn't always pop back to the call screen so I can hit End Call. Therefore, the call continues on until it disconnects. How do I get back to that screen short of never putting the thing to sleep? Could my Marware glove cover have something to do with this?

    Your case is very likely blocking the proximity sensor. Remove the case and see if the problem goes away.

Maybe you are looking for

  • Retenção PIS, COFINS, IR e CSLL, no pagamento - TAXBRJ

    Olá! Estou configurando a retenção para PIS, COFINS, IR e CSLL. Aqui nós utilizamos TAXBRJ pela questão de OIL. Porém quando olho as condições na ordem de venda, a condição ICW5, IPW5, ISW5 e IRW5 não estão trazendo valores, logo a condição ICW6 não

  • Cannot create dataset from claims based authentication sharepoint site in report builder 3.0

    I have a sharepoint site, which is configured as claims based authentication (ref: http://ashrafhossain.wordpress.com/2011/05/25/how-to-configure-claim-based-authentication-for-sharepoint-project-server-2010/) . both AD and asp.net members can log in

  • Charts in reports6i

    hi, i'm using the report biulder and would like to change colors in the output of my charts. how can you do it? pl/sql? where to put it. i am not using the forms builder only the report biulder. thanks in advance sagy

  • How to disable Switch Profile and Auxilliary Metadata set on UCM checkin screen?

    We are using webcenter content 11.1.1.6 with Record Management component installed on top of it While trying to checkin a new document from a normal checkin screen or from Manage attachments screen two options come at the top 'Switch Profile and Auxi

  • Mail 6.3 (1503) - Search subject-only, sender-only, etc.

    For work I rely on being able to search messages by just their subject, or just the sender, etc. Prior versions of Mail (And my old favorite Thunderbird) had thes options handy right atop the client frame, with the search bar, so you could toggle as