CK11N alert:"Costing item 00001 is not assigned to a cost component"

Hi,
     When I use CK11N, fill in all the necessary field, there will appear a alert.
      The detail as follows:
Costing item 00001 is not assigned to a cost component
Message no. CK 334
Diagnosis
No cost component is assigned to costing item 00001.
System Response
The costs for the costing item are not shown.
Procedure
Go into Customizing for Product Cost Controlling and check the assignment of cost elements to cost components.
       I have used KA03,KL03,CR03 to checked previous datas, but I find no errors?
What is the problem?

Hi,
Use OKTZ to create cost component structure.
Check for some of these settings also
Configuration:
Define costing sheets
OKTZ create cost component structure
OKK4 Define valuation variant
OKKN Define cost variant
Master Data:
KP26 setup activity rates
CR01 setup work centers
MM01 setup material masters
CS01 setup Bill of Materials
CA01 setup routings
Regards,
Murali

Similar Messages

Cost element 7000218 is not assigned to a cost component in CostCompStruct

Dear All,
How to change the standard price in MR21 for materials with Price Determination Control 3 ( header level V & 3) (Split level S & 3)
In MR21, when I am updating the price for initial stock uploading.
It throws me a error Cost element 7000218 is not assigned to a cost component in CostComp Struct 01
Actually the cost component structure 01 is not active. we are using OP cost component structure & it is active , further the assigned to the company code level.
Cost element 7000218 is assigned to the cost component structure OP.
please suggest why it result in above error, even though we are not using cost component structure 01.
Regards
Subbu.

Hi,
Did you change the cost component structure assignment for the plant ?
This error could be produced due to the fact that for this plant the cost component struture was changed from 01
But ML tables makes reference to the old cost component structure.
You can check table CKMLKEV.
During the creation of the material the system creates data for the current, previous and last period of the last year (12 2010).
Therefore the system tries/ needs to create also a cost componet split for the period 12 2010. For this it must used the cost component structure for this period 12 2010 (maybe 01).
In such a case you have to define the cost element in '01' as well.
Please do read note 434873 carefully for the side effect and correct procedure to change cost component structure.
regards
Waman

Costing item 00002/00003/000 (item no) is not assigned to a cost component

Hi
I am getting this error for many material which are having procurment type as 'F' external procurment and special procurment as '30'-30 subcontracting.
I have also maintained the info record in ME11 for subcontracting.
Costing variant detail: Valuation variant for subcontracting is 'net quotation price'. I am getting this error irrespective of whether I use transfer control or not.
Appreciate an early reply.
Thanks
govind

Hello Govind
If you look at the FI postings of subcontracting GR and IR, it is like a hybrid of purchase and production. The price you pay to the vendor is of course a part of the cost calculation of this product.
The subcontract cost account assignment is done in OBYC -> FRL.
Junqi

Cost element is not assigned to a cost component

Dear All,
On trying to run costing for finished good having one BOM component, system create error in costing log as-
Message no-239-Cost element 954001 is not assigned to a cost component 1
On seeing details:
Cost element 954001 is not assigned to a cost component
Message no. CK239
Diagnosis
The system attempted to generate the cost component split for the material, but discovered that no assignment has been made in cost component structure Z2 for cost element 954001 and possibly for origin group .
System Response
The cost component split is incomplete. The cost of goods manufactured in the cost component split is therefore less than in the itemization.
ProcedureGo into Customizing for Product Cost Controlling and carry out the assignment for cost component structure Z2 and chart of accounts AICA.
where i am missing the required setting.
please guide
regards

Hi,
Use T.Code OKTZ for the relative cost element has to be assigned to one of the components there in
the cost component structure. Choose the nature of assignment for eg. raw material, choose the source and give the cost element. Then choose Assignment and give settlement through Cost center, Order.While coming back activate the cost component structure and save. Try for the Costing.
Regards,
Sadashivan

Itemization item 00001 does not have a cost element Message no. CKBK024

Hi,
I'm getting the following error message while working with Easy Cost Planning.
Itemization item 00001 does not have a cost element Message no. CKBK024
Can any respond immediately on this.
Required information of this issue:
Costing Variant (std): PS06
Material Valuation: 4 Planned Price, 2 Std Price, 3 Moving Average Price.
Activity Types/Processes: 1 plan Price for the Period, 6 Most Up-to-date Plan Price.
CO Version Plan/Actual
Sub Contracting: 3 Net Quotation Price.
Quotation In Purchasing : Actual Quota Arrangement
External Processing: 3 Net Quotation Price, 4 Gross Quotation Price
OverHead: No Assignment
And Work Center defined fine had the assignment of Activity type and Cost Center.
In KP26, activity type rate defined for period in combination with Cost center and Activity Type.
Then what would be the problem, pl respond immediately.
Vemula

Hi Friends,
I, my self resolved the issue. by considering the following 3 rd strategy in
For Activity Type/Processes: Considered 3rd strategy as below:
Activity Types/Processes: 1 plan Price for the Period, 6 Most Up-to-date Plan Price
and 2 Plan Price as Average of All Fiscal Year Periods.
Now it has been resolved.
Thanks all.
Now it is closed.
Vemula

CO-PC Cost components are not assigned when actual cost was posted

Hi Expert,
I estimate material cost by Tcode CK11N, the result is cost components were assigned to plan cost. It's okay. But, I have a problem when posting actual cost.
After actual cost was posted by confirming backflush, I run Tcode KKBC_PKO to check again, but Cost Component field is not assigned to actual cost.
Please tell me the reason.
Regard,

Hi,
Thank for your answer.
I will check Cost component Structure, and ensure that all cost elements were assigned.
Additional, cost components were assigned to PLAN cost, but not assigned to ACTUAL cost.
Do I have to configure something more?
Regard,

Cost element of cost item 99 0100 not defined

Respect to all HCM consultants,
On releasing the planning scenario I am having error
Cost element of cost item 99 0100 not defined
how do I over come this?

Goto T Code KA01 and check ut cost element if u authorization.

Permit not assigned for Actual cost

Hi Dears,
Permit not assigned for actual cost in maint order
Actual cost in maintenance order is 3000
In IPMD, cost1 is assigned with class ACTUAL COST and value 3000 is defined.
In OIPG, Permit class ACTUALCOST is assigned.
Goods issue done to order for value 3000.
Again cost determination executed, but still cost1 is not assinged to the work order.
Am i missing anything ?
Regards,
Alagesan M

Hi
In charac CT04 i maintained one value 3000 and table maintained CSEVPERMIT and IKOSTEN
In class CL01, assigned the charac for 049 class type
In OIPG, permit class is maintained with class
In IPMD, new permit created and assigned class in classification and maintained 3000
Now order created and component assigned the planned value is 3000.
through MIGO goods issue done and found the actual value is 3000.
But still opened the permit found nothing assigned.
For Estimated cost and planned costs it is working good only for actual cost permit is not assigning.
Actual cost we need to anything more other than this ?
Alagesan

Item no does not have a Variable Cost on the Cost Detail screen

Hi,
Item no does not have a Variable Cost on the Cost Detail screen. If you use the Product Cost Model, it does have a variable cost. We need to determine the reason for this nonccost. Any idea of what would be the reason is.
Thanks,

Hi Friends,
I, my self resolved the issue. by considering the following 3 rd strategy in
For Activity Type/Processes: Considered 3rd strategy as below:
Activity Types/Processes: 1 plan Price for the Period, 6 Most Up-to-date Plan Price
and 2 Plan Price as Average of All Fiscal Year Periods.
Now it has been resolved.
Thanks all.
Now it is closed.
Vemula

EC-CS - FS Items that are not assigned to Consol Chart of Accounts

There are many redundant FS Items that not assigned to Consol Chart of Accounts. Instead of identifying and deleting one by one, what is the fastest and best way to clean up?
Thanks and Regards,
B Lim

Hi
when you are in the beginning of the of the project you can generate the EC-CS FS Items out of the consolidation chart of accounts finance Financial statement.
This saved for me a lot of work and i had to do it anyway because i take over from the periodic extract.
Cheers
Tim

Everytime I use firefox to connect to the internet I get an alert saying that firefox could not initialize the applications security component. What does this mean and how do I fix it?

When I use firefox to get on to the web I get the following message everytime: "Alert: Could not initialize the applications security component. The most likely cause is problems with files in your applications pforfile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security feactures." Once I click the "OK button" at the bottom of the alert box firefox starts but does not act right. For instance it will not let me look for software updates. When I click on "Check for Updates" from the "Help" drop down menu I get a message stating: "There were problems checking for, downloading, or installing this update. Firefox could not be updated because: Update XML file malformed (200). You can update firefox manually by visiting this link and downloading the latest version."

The following support articles should help:
* https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
* https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200

Cost element is not assigned to cost component structure

Dear Team,
While doing the settlemnt through KO88 system is showing the message like below
Cost element 433001 is not assigned to a cost component in CostCompStruct Z1
     Message no. MLCCS 010
Diagnosis
     You have activated the actual cost component split.
     No cost component has been assigned to cost element 433001 origin group
     in cost component structure Z1 for chart of accounts XXX. The system is
     unable to assign the value to a cost component.
System Response
     You cannot carry out posting.
Procedure
     Check whether for this operation the value to be posted is to be
     assigned to this cost element.
User has done tchnically completed from CO side .But system is showing the open status in FI.
So we have suggested to the user to do settlemt through KO88 system is showing the above message .Half of the production orders we can able to close through Ko88. Some of the PO we are facing the above issue.The concern GL account showing by the system is maintained as a sundry receivables a/c.
Please advice how to proceed further.
Thanks for the consideration.
Regards,
Suma

Dear Sir,
System is showing the GL account is not relating the cost element a/c ,The concern account belongs to Sundry receivables account.
The configuration is done correctly with all expenses GL a/c in OKTZ as well WIP accounts assigned corrctly in OKG8.                How the system is showing this account which i am not understanding.
Please advice to resolve.
Thanks for the consideration.
Regards,
Suma

All cost items not reflecting in Detailed Planning PCP

Hi All.
When i am executing the PHCPDETL - Detail Planning .I am able to process the other functions.But when i am trying to access the insert cost items then I can see only one cost item but i have more than 10 which are not coming when i try to increase or add other cost items.
What is that I am missing.
Help appreciated

Hi! I'm also having the same problem with the cost items. When I try to insert the cost items, I canonly see two cost items. I would appreciate your help regarding this. Thanks!

Costing Variant not assigned to Number Range Group

Hi,
I have an error while doing Sales order costing. When i create Sales order and do costing for it (Ctrl+F7) it give me an error,
"Costing variant XYZ is not assigned to a number range group"
Where do i need to assign the costing variant to a number range group.
Please advise.
Thanks in Advance,
Safi

Hi Ramana,
Thanks for the reply.
I have mainted the number rnages in VN01.The issue still persists.
Safi

Items in project report(query) are listed under the "not assigned" (column)

Hi All,
Items in project reports (query) are listed under the "not assigned" (column name) Why it is so ?
Start query : project reports & ask for period April 2008 (Period from/to). .
You will see items listed under Not assigned WBS Element (column name)
If you choose for a period of April until June 2008 then you see more items under u201Cnot assignedu201D .
Items should be under Assigned (column name) & not under the Not assigned (column name )
Any suggestions highly appreciable.
Thanks.

Hi,
How are you displaying the ITEM field in the BEx query designer? Is it displayed with "Key and Text"? If so and if the text is not loaded for this master, this may happen.
Regards,
Yogesh.

CK11N alert:"Costing item 00001 is not assigned to a cost component"

Similar Messages

Maybe you are looking for