CK13N Break up of Mat,labor,Oh in Cost component view / itemisation differ

Material Costed having an Multilevel BOM.
We had the issue like cost component view and itemization view , did not Match. So higher level material is costed again.
Now The total are almost the same between the Components View and the Itemization View, but the breakdown (Matl, Labor, Overhead) is not the same.
Material 484, Labor14, OH59 as per cost component view .
Material 506 , Labor9, OH43 as per Itemization view.
Now why since it was just re-rolled difference exist in Break down
Regards
Poopandian

Do you have any semi finished procut in between costed material and raw material.
Do not forget cost component view is rolled up to higher level with its detail . For example
for finished produt A = 100 (total cost)
materail SF 80
Labor          20
but  detail of material semi finished SF = 80
material RM (raw mat) 60
lanor = 20
Nor For A cost component
material in general = 60
labour = 40
but in itemization of A you can see
material = 80
labour =20

Similar Messages

  • CK13N Cost component view COGM

    HI,
    Am having CCS item 10 - RM  20- SFG 30 - Labour activity
    While creating Standard cost estimate for semifinished goods am getting RM cost & Activity cost separately & correctly.
    But if am doing SCE for finished goods the item 20- SFG consumption is not getting effected. Values are posting to item 10 - RM based on the proportionate qty maintained in BOM.
    I have assigned the SFG consumption GL a/c in the item 20 but am not getting the value there.
    Kindly help us to solve this issue.
    Thanks
    Christopher.J

    I think I'm a little confused about what you are really asking.  Your question talks about the cost component view of the cost estimate, but your example looks like you are look interested in booking an accrual for marketing expense at time of goods receipt.
    For the cost component view, once you define your cost component you need to assign the appropriate cost elements or origin groups to that component in (OKTZ).  So the question is what cost element or origin group will represent the marketing cost and how will those costs be assigned to the cost estimate.  One way to do this is by allocating your marketing costs via a costing sheet and then the cost element assigned to the cost component would be the secondary cost element you used for the overhead allocation.  If you did that then you should see a value for the cost component when you view the cost estimate in CK13N.
    However, back to your example.  If looks like you are trying to book an accrual for marketing expense at time of goods reciept.  In that case, you can maintain purchasing pricing conditions that can copy into your purchase orders.  These condition records would contain the amount of the marketing accrual.  It's also possible to map the condition type to an origin group and then you can assign the orgin group to your cost component.  So if you maintain condition records for the pricing conditions you can assign them to the marketing cost component and those costs would show in your cost estimate as well.
    thanks,

  • Fixed and variable cost component break up in PCA

    Hi,
    Is it possible to get fixed and variable cost component break up and contribution report in PCA at each product group level and lower level of node. I think this requires development. As my client requires the report to have cost break up into fixed and variable in PCA at each line item level. Can anyone solve this

    Hello
    You can get the report by using the  report painter, no development will be required.
    Regards
    Madhav

  • Split the material cost into labor and overhead costs

    Hello Experts,
    We get Finished Goods from another plant and that plant is not on SAP. So we load these materials as Finished Goods and enter the price in the costing tab and we do run cost estimates. In the cost estimate we see this price as material cost. How can we split this material cost into material + labor + over head costs? Is there anywhere we can enter the percentages that would split the total price into material and labor and overhead prices? I appreciate your time and response.
    Thanks In Advance

    HI Venkat,
    You can only split material cost using origin groups and not into material, labour & OH as you may know the cost components are grouping of cost elements (with an option to use origin groups).
    If this is too important for you to maintain that cost component split, then I see the only way is to consider maintaining quantity structure in SAP for the finished product, so that cost roll up happens with cost components.
    Hope this helps.

  • Change Analyze cost component split CK80_99 or CK13N.

    HI experts,
    How or where can i change report CK80_99 or CK13N? I don´t know which is it report? I need some summarization row to this report, for example:
    Cost component split:
    10 raw material
    20 wraps
    10-20 material in sum - Summarization
    30 wages
    40 overhead
    10-40 production costs - sumarization
    Thanks a lot, for Your help.
    Gustavo

    Hi,
    CK13N transaction allows you to see information of standard costs in below formts.
    1.Cost itemisation-cost of each item which is responsible for standard cost and summation of all elements in last row.
    2.Cost component-these are configured cost sets based on local cost reporting method.
    3.Costing level with cost component-This replica of your BOM structure with additional information cost for each level.
    Your issue is realated with #2 in the above list.
    I hope following steps will help you to get that information,
    In CK13 transaction call the cost component report.Download this report into excel format and sum up as per your requirement.
    or else if you want configure existing cost components under expected groups in cost component config.
    Hope this helps you.
    Ashok

  • View labor and material costs in plant maintenance work order

    Hi
    I am aware we can bring in the costs in the work order through Activity types and assigning the costs to the acitvity type.
    Is there anyway we can bring in the actual cost for the work performed by the associate? should we link the work center to HRMS?
    Please advise. I need your valuable input for all the points below.
    Main points that need to be addressed:
    1. Each associate that is capable of confirming hours to a work order needs to be assigned an hourly rate that is reflective of the actual cost for the work performed by this associate. These hours are then tracked through the work order to give a cost for labor assigned to that particular job.
    2.Any materials used in the performance of the required task(s) dictated by the work order will be assigned to that order. These materials can be assigned through SAP purchase requisitions, tool crib spot buys, or procurement with a purchase card.
    3.Standard reports need to be created so we can track the total maintenance costs for any level of the equipment hierarchy as currently set up in SAP. When this report is created it should show the total maintenace costs for all the levels of the equipment hierarchy broken down into labor cost and material cost.  I am using Tcode IW37N and IW40 . Is there any suggestion?

    Greetings Chandra,
    1) You will need to create Work Centres for your associates and create the Activity Types. You can default the Activity Type for each Work Centre and maintain the rate for the activity via t-code KP26 planning.
    2) Planned and unplanned Purchase Requisitions for Components with category N will debit the order with material costs. But what do you mean by "tool crib spot buys" and "procurement with a purchase card"? You may need to develop a solution to do such postings to the Order (or for purposes of Cost controlling, manual activity allocation similar to confirming work may be desired such as Manual Activity Allocations via CO transactions (KB21N), unless you can cover that with Purchase Requisitions and POs with "F Order" account assignment.
    3) MCI8 Cost Report should be suitable for you, once you set up the Value Categories & Cost Key Figures.
    See
    PMIS Cost Analysis Reporting Overview
    Maintenance Cost Key Figures in MCI3 and MCI8 Reports
    PM Order Value categories and costs display

  • Plan value(break up) not appearing in sales order cost report

    hi
    I have done sales order bom in cs61,operation in ca01,in va02 for sales order costing in itemization showing like
    material 100
    actity      10
    total 110
    saved and if I see in cost report it show only revenue , cogs(110),but it is not show raw materials and operations.
    please advise me what to do?
    Thanks and Regards,
    Nagesh

    Dear Nagesh,
    Probably, you need to check the status of the BOM and the Routing in the Header. It should be active/released.
    Kind Regards
    Umapathi G
    Edited by: Umapathi Naidu G on Aug 11, 2011 3:26 PM

  • FB50 Error : Can't Post to mat.account using overhead cost centre ...

    Dear Colleagues,
    Users have come up wth this error message when trying to post journals on FB50.
    Where should I be looking at to change customisation in IMG?I think there is a validation rule somewhere set in IMG but not sure where?
    All help is appreciated.
    PAPJ1.

    HI,
    check the validation rules active in your comp. code using T-code OB28.
    It looks like this own defined message is triggered by a validation step.
    Best regards, Christian

  • MIRO Error-Can not post to mat.account & using overhead cost centre &.

    Dear Colleagues,
    On MIRO,users have come across this error where they can not post to a particular G/L account using 2 different cost centres(219 & 220).
    We have some validations on OB28 but although one particular step menitons this message as I stated above,the prerequisite of that step seem to be referring to G/L IN VAL_Plant No_16 AND Cost Center IN VAL_Plant No_17.
    Whereabouts I need to maintain this G/L account/Cost Centre Combination?II had a look at OME9/OKB9 but couldn't get any resolution looking over there...
    All Help appreciated.
    PAPJ1.

    I had to tweak the types  of error messages on OB28 temporarily,to allow for these postings to go through and it worked!.
    PAPJ1

  • What Breaks iPhoto - Comm-Op-Deleting Video From Video Play View

    So I've been suffering through iPhoto since it came out. I say "suffering" because it frequently crashes, behaves poorly, uses 95% of one CPU, and corrupts its library. Version after version, from 1 through 11, it's been having issues. It totally corrupted my wife's library on two occasions (luckily after many weeks of work each time, we were able to recover it), and mine as well.
    After using iPhoto Library Manager to recreate my wife's library, she stopped having issues (iPhoto's "rebuild" option didn't do the trick). After my corruption got particularly bad, I did the same with mine. It took about 3 days to rebuild, and though it still uses 50-95% of one CPU all the time, I noticed something that was working correctly again.
    One of the many problems was that when I rotated a photo from what I'll call the "many photo" view, the photo would disappear completely for about 2 seconds before reappearing rotated. Then, often times clicking it would show the rotated image in the wrong dimensions or such for the first few attempts before sorting itself out about 5-6 seconds later. After rebuilding the library from scratch, this problem disappeared! If you rotate an image from the "many photo" view, it instantly rotated - no disappearing and reappearing.
    It also took up 45GB less size after rebuilding.
    So everything was great for like 3 days, and then I was watching a video I didn't want to keep in "single photo" view, and so I hit command-option-delete to remove it from my library. It gave me the ERROR BEEP and didn't remove the video. At the top it says 0 of 460. I went to "multiple photo" view and deleted it in the same way there, and it deleted it this time, BUT the rotation issue started up and has stayed with it since.
    So that might just be the source of the recurring corruption in the iPhoto Library. I post this in a vain attempt to get the word out to an Apple programmer to finally fix this (and other) eternal iPhoto bugs.
    And yes, I've tried all the command-option-launch iPhoto utilities. If anyone has any ideas on how to fix this without recreating my library each time with iPhoto Library Manager, I'd be happy to hear it.

    1
    So that might just be the source of the recurring corruption in the iPhoto Library. I post this in a vain attempt to get the word out to an Apple programmer to finally fix this (and other) eternal iPhoto bugs.
    this accomplishes nothing since this is streictlhy a user to user volenteer forum as described in the TOU - it is NOT a place Apple monitors for bug reports - to report to Apple  iPhoto menu ==> provide iPhoto feedback
    2 -
    I've been suffering through iPhoto since it came out.
    The soluiton to this is to fix the iPhoto library and lear how to use iPhoto correctly or to use a different program that you do like - use of iPhoto is not madated
    LN

  • Cost of Goods Sold Table of CK13N

    Dear Experts,
    How to find Cost of Goods sold components of CK13N values with respective  cost element in Table
    kindly provide valuable suggestion
    With regards,
    Ganesh

    Ganesh,
    you will get the cost estimate results from KEKO and KEPH tables.
    In the standard cost scenario COGM and COGS values are same.
    when yo see the cost component view in the CK13N it will match with cost fields in the KEPH.
    pass the material and plant in KEKO table from there take cost estimate number, now pass this cost estimate number in KEPH table as per your cost components in each cost fields you will get the details.
    Please let me know if you need any further help.
    Regards,
    Ravi

  • Itemizations Calculation - CK13N with 0CO_PC_PCP_03 or 0CO_PC_PCP_30

    Hi all,
    I have a request to bring into BW the itemization calculation as it is in transaction CK13N.
    I  have activated the datasources 0CO_PC_PCP_03 and 0CO_PC_PCP_30 but it is not working as I expected.
    I would like to have the different costs per cost component view (Direct material, direct cost, TIC...) but with the 2 datasources I always have the total value only for the material and not for the rest of components...
    I am new at CO extraction and I don´t know if these are not the suitable datasources for the data I am looking for or is there anything I am doing wrong?
    Thanks in advance for any input.
    Regards,
    Elena

    Hi,
    We are in same request of loading data. Can you let us know how to bring all plant,material data to BI.
    What is the selection condition that best suit these infopackages to get the data to BI.
    Thanks,
    Arun

  • Report in standard costs between RM , labour & OH

    Dear Experts,
    Need a report that lists all of our plants parts and breaks the part's standard cost down between raw material and labor/overhead costs.
    Report that breaks down the the standard cost between raw material and labor/overhead costs
    Thanks,
    Bhaskar.

    Dear Baskar,
    Execute Report S_P99_41000111 for a material and plant combination ,cost component view 1and after executing click on
    change layout(Control+F8) and select the fields,Machine Costs,Labour Cost,Overhead cost,Purchase material usage(raw
    material's cost).
    You can get the splitup costs in T Code CK13N,after entering the material,plant,costing variant press Enter and then press F5.
    Regards
    Mangalraj.S

  • Cost component view German instead of English

    When I display product cost estimate with quantity structure. Under the tab costs all the cost component view description show up in German. In our development and test client they show up fine in English. I don't know if this problem has any thing to do with costing at all but I was just wondering if any of you faced this problem and how did you solve the issue. If this is not the forum can you please point me to where should I pose this question.
    Regards

    Hi NIK83,
    When a cost estimate and its itemization is saved in txn CK11N, the text of the items is only written in one language to database table CKIT. So if somebody who was logged on in German created and saved the cost estimate, everybody who displays this cost estimate in CK13N will  see German texts. This is the design of the database tables. If there would be texts           
    for the items in every language installed in your system, the data volume would increase significantly.                                                                               
    However, you can change the layout of the itemization and the cost structure by adding certain columns, e.g. material description, with the English texts. You can save this layout and make it available to all users.                                                                       
    Regards,
    Antje

  • Display Dept. amount in Std cost estimate cost component view

    Dears,
    During implementation of Repetitive manufacturing, my customer Requirement is to have 4 activity types:
    1- Utilities : (Elect-water-GAS ... Etc)
    2- Labor : (salary - bonus ..Etc)
    3- Depreciation : (Depreciation exp)
    4- other : like (maintenance .. Etc)
    he wants that so he can know this classification of the above costs liek depreciation per material in the standard cost estimate so my question is:
    Is it applicable to display the above requirement and using only 2 activity types
    Labour and machine
    and use the cost component structure to display the above req ?
    as an example:
    in CK11N : if i switch to cost component view to display the depreciation amount and Etc
    Thanks and best Regards,
    Ahmed Samir

    Salaam Ahmad
    You have both choices.
    You can go with 4 act types or go with 2 and use costing sheet for the other costs
    I will prefer 4 act types
    Br. Ajay M

Maybe you are looking for