Classic Support Audio Issue

I have OS 9.2.2 Classic Support on my OS X 10.3.9 to play my older CD rom games and older files that require Classic Support to load when I open them. But when I load a game that requires OS 9 to load, the audio is nearly twice as fast as what it should be. Has anyone had this problem before? I would like to know how to solve this problem.

You could create a process that runs before the validations that writes your report data out to a collection and sets a hidden page item to indicate that your data is now in the collection. Use the page item being set to avoid running this process more than once.
Create a 2nd region which Queries the collection instead of the table(s), make it conditional on the page item being set in the above process.
Add a condition to your existing report region to not display if the above page item is set.
When the validations pass, your data will always be in the collection so have your update process always use of the collection data.
Edited by: Bob37 on Apr 3, 2012 8:41 AM

Similar Messages

  • Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!

    After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
    Neither will install.
    Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
    It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
    My only issues are audio.
    Here they are:
    1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
    2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
    In Windows 7 the mic part of the trrs headset does not work.
    3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
    Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
    I need these audio aspects to work properly though!
    I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
    I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
    It doesn't. This has been a nightmare of problems.
    Is Apple going to step up to the plate and make good on their promises?
    Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
    Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
    If you are an Apple tech person or an Apple user that can help on these issues, please do!
    Thanks, Dr. Duke
    An American profesor in Europe.
    PS I will post this under Imac windows 7 updates without a reinstall and under
    imac Sound issues.

    On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
    If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
    Here is my last two cents in to the inquiry.
    Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
    Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
    Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
    Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
    Mac has a great reputation. I hope they remedy these problems right away.
    Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
    When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
    As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
    Thats it.
    Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
    Best to all!

  • Could not find supported audio device in AA3

    okay so i know its not a good idea to use AA3 with Vista...but other people are doing it so why can't I? I've seen the topic posted before but the threads are pretty much dead and I still have no helpful info. I've scoured this thing with no affective solution. I've installed AA3 on several systems in the past and never had this much trouble--if any. This problem has gone on for over 2 months now!
    Since I installed AA3 on my new computer all i can get and all i have ever gotten is the "AA could not find a supported audio device. Please check device settings" dialog--
    press okay (or x) and Audition closes---never getting past the loading window --during "initalizing required components"
    I have 3 audio devices/ with up to date drivers which all my other audio programs recognize (Audition 1.5, Sonor, Cubase + more) with no problem whatsoever--
    AA3
    Windows Vista SP1 64 bit
    Realtek HD Audio
    + Presonus FP10 digital firewire interface/preamp (kind of unrelated but aa3 still wont recognize it either apparently)
    I have installed all updates including the 64-bit SP1 fix for AA3.
    I've read the Realtek HD issue solutions and made sure my drivers are fine.
    IM DESPERATE----PLEASE!!!
    I'm having a recording studio built right now & AA3 is my main DAW so this is rather dire.---All the other DAW's i've tried suck compared to AA3 (with the exception of stability). hehe AA3 is always crashing on me and yet i still prefer it over other DAW's.

    I put the PreSonus StudiLive 16.4.2 plus Adobe Audition 3 setup instructions into a short write-up on my blog: Live Event Multitrack Audio Capture
    Here is a photo showing how to set up the Firewire channels for input and output
    I hope this helps:
    Ron Fredericks
    LectureMaker, LLC

  • My iPhone 5 is suddenly having audio issues through the headphone jack.

    So this is a strange situation, and I'll try to explain in depth so that someone might be able to suggest a solution. As reference, I have an iPhone 5 that I purchased in late-February. I've had every other model of iPhone except for the first iPhone, so I am pretty familiar with the device. I used to be on AT&T, and switched to Verizon when I upgraded to the iPhone 5.
    Two days ago, I was on a six hour road-trip, and I'd been playing my music like normal through my car's auxillary cable. After stopping for lunch, I went to plug my music again, but once the music started to play, I realized that only the drums were playing at normal levels while the vocals were very, very soft. I switched through a few different songs, and realized that all the songs were being played at different levels; sometimes the backup vocals were normal levels while the instrumentation and lead vocals were quiet, or vice versa. I decided to plug my iPhone in to charge, and when I did this, the audio levels were all normal. However, the iPhone was NOT charging. I removed the charger, and the audio went back to being weak and distorted. I went back and forth at this for a bit, trying to figure out what was going on.
    Since then and after some testing, I realize that my iPhone will now only charge anywhere EXCEPT in the car charger (I simply use my USB cable that came with my iPhone and plug it into the power adapter I have in the car). This morning, I tested the audio in my home speaker system, and I had the same audio issues. Only half the song's tracks would be at normal audio levels, while the other half would be at a very quiet, almost nonexistent level. I tried plugging my charger into the phone to see if that'd make a difference, but instead of the audio going back to normal like it does in the car, the music stopped and there was just crackling and very noisy distortion sounds.
    I'm super confused and not sure what to do. This has never happened to me with any of my iPhones. I am updating my software right now, and am hoping that that may help somehow. Otherwise, I'm at a loss. Any suggestions as to what I should do would be greatly appreciated!

    Do the new iMacs have digital audio out through the headphone jack?
    Yes.
    http://support.apple.com/kb/SP576

  • HP Slate 21 audio issue after KitKat update and reset

    I have upgraded my HP Slate 21 from JB to KK. Now the sound quality is very bad!
    I came directly from xxx.11 kernel and made factory reset but didn't get a good result. Please how can I fix this tremendous issue?

    Hey @PauloTxR ,
    Welcome to the HP forums.
    I understand you're experiencing issues with sound quality on your Slate 21 PC.
    Please review the following thread: HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity.
    This fix will resolve audio issues of a software nature resulting in the KitKat update. If your issue persists after applying the specific update mentioned in this thread and have done a factory reset, the issue is likely hardware related and not the result of the KitKat update.
    If you have done the above and continue to have problems please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • STILL have MBP audio issues after Bootcamp 3.1

    I have a mid-2009 MBP 13" with Snow Leopard, running 32-bit XP Professional with SP3. I just updated to Bootcamp 3.1 after dealing with low audio, robo-voice from the internal microphone, and spooky red light/trackpad nonsense for months. While 3.1 fixed the red light and the trackpad, my audio issues still remain; I get very poor volume on the Windows side and my voice is still distorted, slow and generally crappy when I use the built-in microphone in the microphone test. The mic doesn't work at all in Steam, which is the whole reason I want it. Was 3.1 supposed to fix these audio issues? It doesn't explicitly say so on the download page, but it seems like it's been quite effective for other people, so if it is supposed to fix the audio I suppose I'm going down to the Apple Store.
    If 3.1 wasn't a magic bullet, can anyone suggest a fix? I'm pretty fed up by now with this issue. I tried reinstalling the drivers after extracting them from the BC 2.2 update (found that process on these forums), and it did nothing. The link to the New Jersey school's site (another suggestion from the forums) no longer works for whatever reason.
    Thanks!

    Use Driver Sweeper and the tips on how to use and troubleshoot
    http://www.guru3d.com/category/driversweeper/
    You may also want to use Windows Installer Cleanup as I mentioned.
    Also CCleaner can help.
    MSCONFIG.exe can lead you to the services and startup items being loaded
    Programs control panel of course to uninstall the program
    Device Manager to rollback; or uninstall and manage device drivers
    Apple installs a number of drivers, services, startupitems so you really have to get familiar with the OS and where/how to manage things.
    Windows 7 supports RESTORE POINTS. Use 'em! and set one before just in case (any good installer or update should create a new one but good to have your own), and make sure there is 10-30GB of space for restore points.
    System control panel advanced protection -> configure your boot volume settings

  • Audio Issues with MacBook Pro (Late 2008)

    I am seeing an occasional issue with my MacBook Pro (Late 2008). The Audio will go out... and instead you will just hear static-like clicking sounds when and audio even happens. For example... when you have the up/down volume notification on... and you change the audio volume.. you hear clicks. Or... when you open up a file that has audio.. you will hear the static-like click when the audio starts to try to play.
    The work around per-se is to completely shutdown and turn the notebook back on. A simple restart does not seem to fix it... it looks like the system needs to have a bit of energy drain first. Which... worries me that this is a hardware issue and not a driver issue.
    Wondering how many others are seeing this???

    I went to and Apple Support Center last week and I asked some questions about audio because my MBP was having troubles too. The tech told me audio issues are very frequent on these machines and sometimes you have to change a part of the soundcard. He also added you have to bring the MBP to a support center if you're having the problem several times - in my case I'm waiting the next "crash" since I had only 2 issues so far... If you're under warranty go for a check up and see if it really needs assistance. Goodbye

  • IPhone 5 audio issues when paired with surround sound via Bluetooth.

    iPhone 5 has developed audio issues since ios7 updates when its connected to surround sound system via Bluetooth. Audio jumps and skips in erratic and unpredictable manner on music app and worse on third party apps such as YouTube  . Have restored phone from factory settings etc. Have also checked surround sound for fault with Bluetooth; iPhone 4 ios7 works fine, android works fine but newest iPod touch with ios7 appears to have developed same issue as iPhone 5 since ios7 updates. Advise people to check for this issue on their Bluetooth devices and any advice would be appreciated on this issue  :) 

    Hey there Vxas,
    It sounds like you are gettings some very unexpected behaviour from the iPhone to your bluetooth surround sound system. I would try the troubleshooting recommended in this article:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Check that you are in range of the Bluetooth device with which you are trying to pair your iPhone, iPad, or iPod touch. Most Bluetooth devices have a range of approximately 30 feet.
    On your iOS device, tap Settings > Bluetooth and find your device in the list. If your device says Not Connected, tap the name of your device to attempt to connect it.
    Tap Settings > Bluetooth and turn Bluetooth off and then on again.
    Make sure that your Bluetooth accessory is turned on and fully charged or connected to power.
    Restart your iOS device.
    Tap Settings > Bluetooth and locate the Bluetooth accessory you are currently connected to or attempting to connect to. Then tap and Forget this Device. Try to pair your Bluetooth accessory again.
    Note: You may need to re-enter your Bluetooth accessory PIN if your accessory requires one. Some common PINs are 0000, 1111, and 1234.
    Restart your Bluetooth accessory by turning it off and then on again1.
    Update your device to the latest version of software. See how to update your iPhone, iPad, or iPod touch.
    If your Bluetooth accessory has upgradeable firmware, check to see that you have the latest version1, 2.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Installing classic support

    Greetings all,
    I would like to install classic support on my G5 but there were issues with my computer when I first recieved it (straight out of the box) that meant bringing it to the service provider and they had to replace the logic board. I works great now but os 9 can only be installed on the computer it came with. Does this mean classic support cannot be installed on my system?
    I'd like to get an expert opinion before I go ahead and install.
    By the way when I open "apple>about this mac" It does not show the product serial number. This is due to the changed logic board and is why I am skeptical that classic support won't work.

    In the read me it says classic will only install on the computer the install disks came with. Why? What piece of hardware does it depend upon? So a replaced logic board should not matter?

  • Console Launcher No support Audio Device Available

    Note: Creative SB X-fi is detected (without a yellow mark) in my device manger. My card is an X-fi Titanium Fatalty Professional.
    The easiest way I can put this is by explaining the mistake I made. Without installing the card, I moved it from one PCI-e slot to another, the one below it. This caused a small annoying issue that I decided to fix by totally uninstalling the card (correctly I hope) and putting it back in it's original slot. After reinstalling it via the disk it came with, when the computer restarts afterwards I am told that no supported hardware is detected and most of what seems to have installed correctly doesn't even show in my programs.
    I have tried uninstalling and driver sweeper for HOURS straight over and over and so far nothing is working. Has anyone had a similar issue or know what the problem is? I've already made sure I'm using the same settings I originally used before moving slots but no dice.
    P.S. During SOME of the updates or even installations, I? occasionally receive the error I-00 (usually during Alchemy or Creative Control Console installations or Updates) and I am told the installation can't continue. It does though, simply bypassing these things/
    I am using Windows 7 64bit

    Update: I'm facing a new issue now during installation! -EVERY- time the install wizard finishes and I restart the computer, I see the volume panel icon on the task bar and Creative SB X-fi when I hover over it. However, when I double click to open the console launcher (Which installed correctly to my knowledge) I'm told no supported audio device is available.
    Did I break my card or something after what I did earlier? Or is my disk screwed up now too? I'd really rather not use the motherboard's crappy audio, I can actually tell that the audio quality is lower.

  • HT201777 WHAT IS CAUSING THE NO AUDIO ISSUE ON APPLE TV?????

    I work at a school. Every single classroom has an apple TV device connected to all projectors.
    Staff constantly have issues where they are seeing visual but NO SOUND.
    We created an Airplay Audio Fix in which they can install! (takes about 10 seconds) this disconnects them from the ATV.
    Once they connect back up as per normal and use audio the audio comes back instantly.
    We are unsure of what is causing the NO SOUND issue.
    We know how to fix it otherwise (powering off ATV, unplugging the cables etc... OR OUR AIRPLAY FIX which saves us a lot of time from running from classroom to classroom.
    DOES ANYONE KNOW WHAT IS CAUSING THE NO AUDIO ISSUE? I HAVE COME TO A CONCLUSION THAT IT MAY BE BECAUSE STAFF ARE NOT DISCONNECTING FROM THE ATV BEFORE THEY LEAVE THE CLASSROOM I.E. CLOSING THE LAPTOP LID, WALKING AWAY FROM THE CLASSROOM VIA THE IPAD ETC..
    THIS MAY NOT BE THE CASE AND AM WONDERING IF ANYONE KNOW WHY THE ISSUE OCCURS. I DON'T NEED TO KNOW HOW TO FIX AND WE HAVE A SIMPLE FIX BUT JUST THE CAUSE OF THE PROBLEM.
    ANY INFORMATION WOULD BE HIGHLY APPRECIATED.
    THANKS FOR ANY SUPPORT.

    Could be network bandwidth issue transiently if Macbook makes loads of wi-fi accesses when starting.
    Could be wireless router transiently becoming unresponsive to AppleTv while it negotiates with the new device.
    Could be the MacBook finding AppleTV and some communication between them taking priority on the AppleTV such that AppleTV can't handle the music playback too - it should be designed to be resilient to this sort of thing, but it isn't a very powerful device and some hiccups i think are due to it's hardware not coping, just like a computer becoming transiently unresponsive if CPU hogged by some process.
    If you are opening iTunes on Macbook, try unchecking 'Look for AppleTVs' in Preferences - I seem to recall a few people saying this helped a similar issue, and it would imply that this prevented some interaction between itunes and AppleTV that stopped other functions transiently.

  • Re: Win7 x230 2306CTO audio issues

    Hello I'm giving feedback about the audio issue people are talking about in this discussion forum.  I have an x230 that keeps having audio issues.  Either the audio buttons stop working or if the buttons work, no sound is heard from the laptop without going into device manager and removing the RealTek audio driver and then letting Win XP find it again.  It appears the issues isn't O/S specific and have also seen that laptops sent to Lenovo have the system board and speakers replaced, however it doesn't resolve the issue.  I also see that by reimaging the laptop, that doesn't solve the issue either.  The details of the machine are below:
    i5-3320M(3.3GHz),4GB RAM,128GB Solid State Drive,12.5in 1366x768 LCD,Intel HD Graphics,Intel 802.11agn wireless,1Gb Ethernet,UltraNav,Secure Chip,Camera,9c Li-Ion,Win7 Pro 64
    Machine Family: X230
    Model# 2324-G53
    SN#xxxxxxxx
    BIOS:  2.52
    CHIPSET AND DRIVER VERSION:  Intel 7 Series/C216 Ver. 9.30.1020
    Memory:  4GB
    O/S:  Win XP SP3  32 bit
    Driver Versions:  All drivers up to most recent version from Lenovo support site as of 4-4-13
    Steps taken to resolve issue:  updating BIOS, and all drivers, and Lenovo software available for the laptop.
    Name: Michael Ruskuski
    Email address:xxxxxxxxxxxxxxxxx
    Country:  U.S.
    Phone: please reply to email, best way to contact me.
    Case Number: Haven't opened any cases with Lenovo.
    Moderator Note; s/n edited for member's own protection, e-mail address removed to stop the spambots getting it
    Solved!
    Go to Solution.

    Hi all,
    After discussing this issues with our Cusotmer advocates teams seems that this issues was resolved by doing an unistaaltion of the current drivers and reinstalling the drivers from our support site. Additional updates to the audio and communication application had found to rectify this issues. At the moment I will be setting this post as solved and the resolution. We will continue to monitor this thread and should further issues arise we will gladly unmark this as the resolution and sought to fina new resolution that fits best.
    Hope this helps.
    Regards

  • Audio issues - MANY

    I have a Satellite L745D-S4220RD Laptop, which I bought in September.
    Sound - is there NO control on the keyboard for this anywhere?  Actually it really doesn't matter since the sound that's there is barely audible.  If I stick my head down next to the speakers I can tell there's something coming out of it.  Volume - and it's turned all the way up - is mostly non-existant.
    I use Adobe Audition.  I've used it on various versions of IE from 98SE to my new W7 machine.  I know it works on W7 since I've installed it in other people's PCs at work as well.  However, it seems that for me to record into Adobe Audition - I can't unless I use the internal mic.  I tried to record a County Council meeting from their webstream - got nothing.  Tried to record anything from winamp - got nothing. 
    Played with the settings and discovered something to boost the audio - which makes things louder, but to try to record with anything - now I'm getting errors, which are reminiscent of soundcard issues I had back in the old W98SE days if I tried to use anything but a mic or Real Player to record from into Audition.  It couldn't handle Winamp either - course that was nearly 10 years ago and audio has advanced in nearly every PC I've had but this one. 
    Do you mean to tell me that in this day and buying a new laptop in 2011 the soundcard is this crappy?
    Existing audio that I try to play is herky jerky and goes in & out and likewise sounds just as crappy. 
    I'm in radio - and planned on using this for work when I'm in the field - what I have is completely useless.  I've used the laptop maybe 4 times - all of them trying to remedy the multitude of sound and audio issues that it has to mostly no avail.  I get one thing working - and it screws up other aspects of the audio and sound. 
    Really regretting buying this laptop...........

    You could try reinstalling the sound driver.
    Conexant Audio Driver(v8.51.2.51; 07-25-2011; 59.4M)
    Fn+3 and Fn+4 control the volume.
    If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
    - Peter

  • XtremeMusic and MediaSource 5 - NO supported audio device detected? HE

    I have had my X-Fi xtrememusic card for over a year now. no problems with it so far. runs great. BUT i installed a new motherboard and new cpu, etc.
    Now when I open mediasource player... and click on the SVM buttom or the AudioClean up button, the timescale, or cross fade buttons (essentially all of the buttons on the bottom) it gives me the Error: "This feature is not available because no supported Audio Device is detected."
    Mind you, the sound works.. i can play back music, it works great. AND via the console I CAN enable the SVM and it DOES work... but it seems like the media source player doesn't "see" that i have the xtrememusic card?
    I am running the latest and SAME drivers and applications (mediasource 5) as before. WinXP Pro service pack 3. THere are NO conflicts with any devices in device manager....
    Can someone help? I tried reinstalled the application, and driver... still same issue. I really like the audio cleanup when i listen to my recorded lectures and it takes away the hiss...
    Help?
    Message Edited by bofeity on 0-5-2008 :55 AM

    I noticed there was an?AuzenWDM .5 pack so I have tried that, but still the same problem none of the software will detect the audio device yet the driver installs fine.

  • Outgoing call audio issue

    I bought an iPhone 4s in India two days back. I am facing a strange problem when I make audio calls. Very often (not all the time) I do not hear any audio after making an outgoing call though the call go thru' and timer starts clicking. When I checked with the people whom I called, they said that they got the call but did not hear anything at their end. The workaround that I figured out is to press SPEAKER button twice (activate and deactivate) when I encouter this problem. It seems to be working as of now. Not sure if this is a hardware problem or a software problem or if I am missing anything with settings. Can someone help me?
    Thanks !!!

    Hi raj1434,
    Thanks for visiting Apple Support Communities.
    If you are not hearing callers, or being heard on calls, use these steps to guide your troubleshooting:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
    Make sure none of the microphones is obstructed by dirt or debris.
    Turn the iPhone off and then on.
    Make sure that the latest version of iOS is installed.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Increase the volume during the call.
    Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
    Make sure nothing is plugged into the headphone jack or the dock connector.
    Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
    Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
    If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
    If none of the steps above correct the behavior, back up your iPhone and restore the iOS software to factory settings:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Best,
    Jeremy

Maybe you are looking for