Clear the inspection

Hi All,
while do the GR for the material from the vendor , the stock posted to the quality . since we maintained the QM view in the material master with the quality control key 0007.
Now we need to transfer the stock from quality to unrestricted .
how to tranfer the stock.
pls explain the QM step to follow.

Hi Raj,
first you have to check have you maintained inspection type 01 in QM view. if yes then there must be an inspection lot generated at the time of G.R check it in the Tcode QA32
if inspection lot is there you have to do result recording and give usage decision, in the Usage Decision tab you will get a stock posting option from there you can post material from Quality to unrestricted.
secondly if there is no inspection lot generated at the time of G.R then you can do trasfer posting through MB1B directly using mvt.type 321 form Quality to Unrestricted .
hope this will clear you if you have any doubt please revert back
Thanks
Vinay

Similar Messages

UD ICCO SPCO STUP- unable to clear the stock in Quality View.

Hi!
In a QM -Module for a particular material status is showing as "UD ICCO SPCO STUP" in QA32. Usage Decision is done for this particular item. But it is showing the stock in MMBE Tcode. Its unable to clear in QA32.
I tried QA12 and also QVM2 for this stock moving from Quality Inspection to Unrestricted stock. but i am unable to do so.
Could any body plz help me to clear the stock from the Quality View.
Thank you!
-M.Suba

Hi,
Since lot status is "UD ICCO SPCO STUP", the stock posting against that lot is already done.
Is batch management active ? is so then check whether you are getting stock of that batch in Quality in MMBE.
Chances of some other lot for same material having status SPRQ are more, go to QA32 put specific material and select all lots, then apply the filter to status field and search for SPRQ status availability. You will find some lots of same material for which UD given but stock posting not made.
Please check and revert.
Best Regards,
Shekhar

CALIBRATION WITH OUT GENERATING THE INSPECTION LOT

Dear Friends,
I am clear with the regular process of calibration where the inspection lot is generated for equipment and result recording is done and ud is given.
But my client doesn't want to any of result recording. He want to just maintain the equipment schedule then send equipment to outside agency as per schedule for calibration. And when equipment is received back in he want to maintain the history and the next date should be triggered.
I have already done following :
IE01 >>> QDV1 >>> IP41 >>> IP10 >>> IP30 >>> IP24 >>>
now if i check in IW32 the purchase requisition is not generated automatically, pl help me in this regards,
Thanks and with regards.
Shekhar Mokashi

hi
if you don't want inspection lot for the order then you need to maintain blank for the inspection point in the task list then you don't get the task list.
and if you want to generatethe external service PR through the operation then selct the control key PM03(service control key)
then system ask you enter the vendor deatils and costelement purchase group etc.
pl try
ashok

Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

Did you find an answer to your question?
Would it also apply to Mountain Lion's Messages?
Thanks

I would like to be able to start typing a URL directly (with no need to clear the field first) after opening a new tab with my homepage...

I've just installed the newest desktop version of the Firefox browser because my Opera doesn't feel very well these days. I'm trying to become friends with Firefox, and that's why I've changed the new tab settings in order to have my offline homepage loaded every time I open a new tab. There is an inconvenience — when I press Ctrl+T, the cursor appears at the end of the URL. It means that when I start typing, the letters show in the address bar after the URL of my homepage, so what I need is to clear the field first.
Is there a way to get rid of this? (If it helpes, I'm currently using Windows 7.)
I would appreciate if I could just press Ctrl+T, type a URL, and press Enter when I want to go to a website different from my homepage. Thank you for your replies!

Then you can use (Ctrl+L and) Ctrl+A to select all the text in the location bar or Shift+Home/End.

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I have changed the DNS number to 8.8.8.8, I have worked on this for 2 days and still can't find a fix, HELP!!

I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I haves changed the DNs number to 8.8.8.8, I have worked on this for 3 days now, HELP!!!!

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

TS1503 How do I clear the 'other data' on my iPhone 4S? It is using 25% of the available memory. I do not want to have to wipe it and then reset every thing I use. That's why I have restore. Except restore puts the other data back on the phone.

I've come to the conclusion that Apple is no better than Microsoft. There was a functional iTunes. I could sync music, playlists, etc; across my iPad and iPhone. I can't now. It now eats up storage on my devices with 'other data', and Apple is silent on what is going on. I currently have 2 iMacs, 2 iPads, a Macbook Pro, and an AirBook Pro. I will stop purchasing Apple products. It is a royal pain to fix anything. This support page tries my patience to use. I used to enjoy working with Apple products, simply because they functioned and where intuitive to use. No more. Music is impossible to sync across platforms using the same account. Songs only, no playlists. This is step back to the early year of systems. No common data formats, zero portablity, and labor intensive.
Way to go Apple, you've destroyed your reputation!

Similar issue -- this is the third time in as many months that I've had to restore my iPad. It's a iPad Mini w/ 32GB (ME277LL/A), running the latest iOS8.1.2. The "other" data starts off about 1GB and will bob around that. I was careful about games this time, seeing only a slight rise in the data. Once it started to rise, I deleted all of the game and the data on Game Center. No joy -- the data stays about the same.
Then I noticed it was really climbing -- shooting up to about 10GB and sitting there, no matter what I did: sync it: nothing. Deleting music (on the off chance it was album art or some such: nothing. Deleted all the books in iBooks: no effect -- still 10GB. Cleared the iCloud storage, cleared caches repeatedly: nothing. Reset everything: no effect. Only Restoring the iPad -- which takes forever and is a gigantic pain in the @$$ -- gets it down. This is exactly the same thing that happened the other two times -- I lose about 10GB to "other."
I now suspect, thinking on what I was doing with the device, that pulling movies from iTunes seems to be the culprit. Deleting the movies might take the movie "off the iPad", but there seems to be a corresponding jump in Other. My guess is there's some glitch dumping the information elsewhere.
It makes a 32GB iPad pretty frickin' close to useless in a remarkable amount of time. I've not had this issue until this iPad (bought last summer) with the iOS8 upgrade. I don't see this happen on the iPhone 5S with the same OS...that's why I dialed down to iTunes (when is it not smack in the middle of issues?) and Video as the culprit; I don't watch movies on the phone.
I've noticed a massive amount of posts in support and around the web on this matter...it might be time for Apple to shift it and do something about the matter. If I'm going to be restricted to surfing the web, email, and little else thanks to the Other issue, it really doesn't make sense to stick with this device. I can doo all that on my laptop, can't it?

When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

Automatick clearing the vendor open items

Hi,
Senario related to intercompany invoice posting through EDI.When ever A/R side cancelling the invoice system will post the credit memo in A/P side through EDI.System automatically clearing the A/R side but in A/P side invoice and credit memo is showing as a open item.Please suggest how to clear these invoice and credit memo automatically.
Thanks
Damodar

Hello,
You schedule F.13 in the background every night (in non-peak hours)
Before that make sure that you have proper configuration for "Automatic Clearing" in OB74.
Regards,
Ravi

F110- not able to clear the debit and credit entry with the same reference

Hi,
I am not able to clear the debit and credit entry with the same reference in F110 even after having the payment terms as immediate payment, payment method is maintained in document no and vendor master data. Both debit and credit entry is appearing in FBL1N as an open item but it is not appearing in F110.
In Log message appear as 8 days grace period is existing whereas as payment term is just 0001- immediate payment.
Kindly advice me what could be wrong.
Thanks,
Manya.

Hi,
Credit and debit balance in vendor account are not cleared automatically when only vendor line item has payment method and credit memo has not payment method. Also when there is not payment method maintained in vendor master data.
In such case to avoid payment to vendor when vendor has debit balance we perform debit balance check.
In second scenario when u2018individual paymentu2019 is selected in vendor master data vendor invoice and credit memo are not cleared automatically in F110.
To setoff vendor credit and debit balance in F110 you to uncheck u2018individual paymentu2019 check in vendor master data > company code data > payment data.
Thanks!
Raju

Unable to clear the recently open files list

Currently, in order to clear the opened files list, the user has to go into the Windows registry. This by itself can be bad if the user is not familiar with the registry; could mess up the registry if not very careful. There appears to be no plug-in/addon for this option nor is there any user option to select to clear the list. There is a setting in the options/permissions to limit the number of opened files to the list; the minimum number being one(1). Cannot set this number to zero(0) unless maybe there is a registry fix for this. I want to suggest that in the next release, or at least as soon as possible, to add to the Adobe Reader (by default) a user option to be able to clear this list with having to enter the registry. Or, maybe create a plugin/addon to perform this action. That's it.

Hi Ineedtoknownow
You can raise your feature request on below link : https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How to clear the open documents in case if document currency and local curr

Hi,
Can anyboday advise how to clear the open document of a particular vendor for a particular company code. Here the issue is that balace is netted to Zero in the document currency but not in the local currency. The document was posted in Currency CAD and the local currency is GBP.
When i check the FBL1N, there is it showing net balance is ZERO, but document is still in open
status. I tried using Transaction code F-44, but it is not allowing me.
Can anyboday advise how to perform this. Points will be awarded.
Regards,
Sree.

Hi,
In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
Hope this will resolve
Assign points if useful
Thanks
Aravind
Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

Document is getting posted but unalble to clear the open items

hi gurus,
i m using the inbound idoc ACC_DOCUMENT03 to post the receipt against invoice. uptill now i can post the receipt but it shows the items are still in the open items. i need to clear the open items for the invoice. how to solve it .

Hi,
In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
Hope this will resolve
Assign points if useful
Thanks
Aravind
Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

Clear the inspection

Similar Messages

Maybe you are looking for