CALIBRATION WITH OUT GENERATING THE INSPECTION LOT

Dear Friends,
I am clear with the regular process of calibration where the inspection lot is generated for equipment and result recording is done and ud is given.
But my client doesn't want to any of result recording. He want to just maintain the equipment schedule then send equipment to outside agency as per schedule for calibration. And when equipment is received back in he want to maintain the history and the next date should be triggered.
I have already done following :
IE01 >>> QDV1 >>> IP41 >>> IP10 >>> IP30 >>> IP24 >>>
now if i check in IW32 the purchase requisition is not generated automatically, pl help me in this regards,
Thanks and with regards.
Shekhar Mokashi

hi
if you don't want inspection lot for the order then you need to maintain blank for the inspection point in the task list then you don't get the task list.
and if you want to generatethe external service PR through the operation then selct the control key PM03(service control key)
then system ask you enter the vendor deatils and costelement purchase group etc.
pl try
ashok

Similar Messages

Automatic Inspection lot not generated for Inspection lot origin 12

Hi all,
I am not able to trigger the automatic Inspection lot for General Delivery i.e Inspection lot origin 12.
The scenario is, I am creating the STO ( Inter company stock transfer) and against the same STO i am creating the delivery but after delivery inspection lot is not generated. In the material master correct inspection type is maintained also the mvt type 641 is active for QM. The inspection lot origin is assigned to the delivery type in the configuration but still i am not able to generate the inspection lot.
Please let me know i am missing something?
Regards

Hi,
You are missing 1 Config
Quality Management
Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Inspection at Shipping (Tcode OQL8)
mantain inspection origen agenist Delivery type u are using.
also you need to create Sales Info record(QV51)
I hope all other settings are OK then it should work
Edited by: Jayashankardm on Jan 6, 2010 9:59 PM

Problem with the inspection lot

Dear Gurus
Whenever I want to do pgi the system is throwing this error message Status of inspection lot 100000000016 / partial lot 000000 does not allow good issue.I am using inspection type 10
Regards
Sandip Sarkar

Hi Sandip
Until a Usage Decision is made on the inspection lot, PGI is not allowed
Regards

How can I generate automatic inspection lots every 15th day

Hello,
My client receives chemicals (Raw Mat) every day. Incoming inspn is done only for physical spec and Usage deciison is taken on same day itself.
As he is getting raw mat from good vendors, he usally do chemical analysis every 15th day.
Whats the best way for me to map this process of generating inspection lot on every 15 day. initial incoming lot we cant use as he already taken UD on that.
15 day chemical analysis dont have any impact on qty posting as Raw mat usally will be consumed.
Is there anything other than manual lot. I welcome all ideas.

In this case your looking at a pooled sample of the approx. 15 batches of material that were received in. Correct?
If you are batch managed, then no. Since the sample is a composite sample, you can't link it to anything else really and you don't have a batch number to enter into the inspection lot upon creation. First, you'd have to create a dummy batch to hold the results. Which you could do maybe by date if your system allows external batch numbering.
Then you could at least manually create the inspection lot.
The is no true "event" to trigger the creation of the inspection lot as there is when you do a GR. The only why you could trick the system would be if your were willing to maintain a separate storage location, and do a stock posting to it of the sample quantity each day. Then you could have an inspection plan that would create a skip lot each day. On the 15th day it would become required. You would probably utilize a copy of movement type 411 for this and use that custom one to make the moves.
The problem with this is then you'll have to write off that little bit of material at some point for accounting purposes.
Another option.. you could create dummy batch and set a 15 day inspection interval on it. Use deadline mointoring to create the lot one day in advance of expiration.
One more option: Use standard calibration inspection to set up a calibration program.. I.e. recalibate every 15 days.
Craig
Edited by: Craig Snyder on Mar 25, 2008 1:08 PM

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

Customer number not in the inspection lot for a make to order scenario

Hi All,
I know that standard SAP will get the Customer number into Insp. lot only for insp. types 10/11/12. I am wondering if someone know a way to get the customer no. into insp. lot for insp. type 04 where the material is make-to-order scenario and the Production/Process order has the Sales order and customer no. without activating User-exit. The quality users want to be able to see the customer no. in insp. lot without having them to go to process order.
It makes no sense to me why the customer no. is not brought into insp. lot when that is available in the Prod/process order, which can further be used to select the customer specific insp. plans for 04 insp. type Insp. lot without using Variant configuration.
Any light on this topic is appreciated.
Thanks.

Hi Srikant,
I guess.........
Normally the inspection lot refers the triggering document that are the trigger cause for them.
- Inspection type 01: - Purchase Order and GR material document.
- Inspection type 03: - Pro. Order Number
The same way...
The inspection type 10\11\12 are purely related to the SD, and directly integrates QM and SD. Hence in the inspection lot for the inspection types directly integrated to SD, it will furnish the Sales order number \ Customer.
But the inspection type 04 is purely have it's relation to Production process. So it will have the details related to integrations it has i.e. the "Pro. Order." Hence it integrates QM-PP, it have the data related to PP (Pro Order), not the SD's one.
But I think one way you can achieve it,
Assign the Customer number also to the inspection plan along with the Material. So I think at the time of assigning the inspection plan to the inspection lot, it will refer the Customer number also and will display the Customer number along with Task list Group\Group Counter, in the inspection specification screen in QA03/02
Regards,
Shyamal

How to change the Status CRTD of the Inspection Lot?

Dear all.
I want to Complete an Inspection Lot 10000000005 In the T-CODE qvm2.When I select the Inspection Lot 10000000005 and press F8 to Complete the Inspection,the SAP show an error message "Status check error".
And the detail info show that the error was cause by the Status CRTD of the Inspection Lot.I check the Status of the Inspection Lot 10000000005 and found that it's Status was CRTD CHCR SPRQ.My question was how to change the Status CRTD of the Inspection Lot?
Regard
Yoda

Hi
CRTD means ...
In material master QM vew-inspection setup->Inspect with task list tick is there.
Now to change status,
Go to Qp01>create a task list for material(If not exists)>remember date of creation of task list must be prior to date to creation of inspec lot
If task list is created/exists>go to QA02.<inspection specification -->click on Inspec Spec
and attach task list
go to sample tab....click on sample.
Now save it.
Status will change to REL
Regards
Sujit

Additional field required in QA32 -to assign the inspection lot - Inspector

Hi.
need an additional field in QA32 to allot the Inspection lot generated to the Inspector for the purpose of rating the inspectors by running a report.
Also needs to appear a drawing document number against the respective inspection lot which should also appear in the reports run at the QA32 screen.
kindly pour in your suggestions.

hiii,
go as per Mr. Surjit
Regards

Batch not created for the Inspection lot?

Hi Experts,
I have created a the production order by inputting the Batch in the GR tab and released the production order. The release of Production order will create a Type 03 lot , but surprisingly it doesn't show the Batch in the Batch field when i look the inspection lot that was created by release of production order, instead it shows blank. I have checked the material master and it is batch managed material. Please let me know where I'm going wrong.
Configuration- Batch is unique at material level indicator checked
my plant has Batch status management indicator
Please find the screenshot below for type 03 lot and also the Batch management indicator in material master in sales/general view, work scheduling and warehouse1.
Thanks,
Pavan

Hi Pavan,
According to SAP Note 50618, you may consider to implement the correction on that note or use partial lot assignment.
For partial lot assignment, you can find the setting in Routing header and customizing in SPRO with path: Quality Management - Quality Planning - Inspection Planning - General - Define Identifier for Inspection Points.
There's also another discussion regarding this issue. Please find here.
Regards,
Julian

Assignment of task list after the inspection lot status is released

Hi,
I have applied a user status with which i am able to release the inspection lot.After that i am going to assign a task list. But it is not getting assigned.
please help me.
Regards
Vivek Deshpande

Hi,
Key date is same. I have checked for it.
What i am saying is , i have manually updated inspection lot status to release state by applying user status. And after that i am trying to assign inspection task list to the inspection lot.But i am unable to do so.
Can i do this ? Please help
Vivek Deshpande

Transaction to close the inspection lot in mass.

Hello,
Due to settings in the material's QM view , inspection lot with origin 89 were created for all the process orders , we don't use these inspection lot for recording any results , now we are not able to close the process order because the inspection lot related to the order are not closed yet.
Can you please let me know transaction to close all the inspection lots collectively so that i can proceed to close the orders.
regards
jeet

Are you sure the lots are inspection origin 89 and that those are preventing the closing of the orders? 89's should be manual inspection lots and should not have been caused by any settings in the material master but would have had to be caused by someone creating them. There is no reference to an order number in an 89 lot so I'm not sure how they could be blocking an order. Now.. If you created these as the result of a custom development that might be different. But they still shouldn't be able to block the closing of an order, unless of course you have some other development or user exit being used to check on the lot.
That said, unless you record results in the 89 lots you can't mass process them close. You have to do them one by one.
I would also suggest you look for inspection lots with an 03 origin as these CAN influence the orders. But again, they usually don't prevent you from marking the order technically complete. If you mark the orders technically complete, you can then use QA40 to close the 03 lots where the orders are TECO status.
FF

TECO is not allowed without closing the inspection lot

Hello
I have implemented 03 & o4 inspection.
When I made TECO of Process Order system is allowed without making UD of inspection lot.
I required if the inspection lots are open of particular process order system should not allow for TECO.
Please suggest the solution.
Regards
Ashish R

Hi ,
Can you check in the Follow up action in spro whether you have defined FM QFOA_ORDER_TECHNICAL_COMPLETE and mark the After posting and Sync updating.
Check with your abaper with the below code -
CALL FUNCTION 'QFOA_ORDER_TECHNICAL_COMPLETE' "Follow-Up Action: Technically Complete PP Order with order category 40 ( AUFK-autyp= 40 )
EXPORTING
    i_qals =                    " qals
    i_qave =                    " qave
*   i_qapo =                    " qapo
IMPORTING
    e_subrc =                   " sy-subrc
TABLES
    e_protocol =                " rqevp
    . " QFOA_ORDER_TECHNICAL_COMPLETE
Otherwise , you can apply User Exit PPCO0007 in co02 or cor2
Regards
JH

Reverse GR after the Quality has passed the inspection lot

I have a situation where the GR was done, Quality has approved the materail, now we are trying to reverse the GR...the system is giving error when trying to cancel the GR...
"You cannot cancel GR, since inspection lot is already partly posted"
How can I reverse this GR,
PLease advice,
Sam

hi sameer
To be able to reverse a stock posting for an inspection lot, the following conditions must be met:
A usage decision has been made for the inspection lot.
The goods in the inspection lot have been posted from inspection stock to blocked stock or unrestricted-use stock.
If you posted the goods to a stock other than blocked stock or unrestricted-use stock (for example, to scrap), you must first post the stock back to blocked stock before you can reverse the original stock posting
Reversing Stock Postings
Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
In the field for the movement type, enter 102 (goods receipt for a purchase order into warehouse - reversal).
In the field for the purchase order, enter the purchase order number for the original goods receipt.
You can copy the purchase order number from the inspection lot.
Choose Enter to display the selection screen for the purchase order items.
Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
Save the goods receipt and exit the Materials Management component.
Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen
regards
thyagarajan

Data filtering in XML report with out changing the underlying query

Hi, This is Nagesh and from Verizon.
I'm testing Query based XML report in Peoplesoft 9.1 app with tools version 8.5.
I'm trying to filter the data on XML Report template with out changing the underlying PS query. I mean filter the data on the report to only specific accounts though the underlying PS query query return transactions booked to all Accounts for a given Legal Entity. Is it possible. any advise or idea is highly appreciated.
Thanks
Ages

If the value is not of importance how come it became obligatory in your program?
Any how you can do one thing...Put some value in your obligatory field, put a debugger point where you are interested in and use the pencil tool to change the value of the field while debugging.
Regards,
Philip.

I cant remember my password to logon to my mac, how can i change it with out needing the old one?

i cant remember my password to logon to my mac, how can i change it with out needing the old one?

http://support.apple.com/kb/HT1274

CALIBRATION WITH OUT GENERATING THE INSPECTION LOT

Similar Messages

Maybe you are looking for