Clearing EPC errors

Hi Team,
I am working in one Upgrade project, in this one of the activity is I need to clear the EPC errors. While clearing the error I am facing following errors, tell me how to clear the errors.
Itu2019s very urgent.
Error :1
Use addition CURRENCY when outputting <FS_RECORD>-V_EXBAS
Use auxiliary field when outputting with MESSAGE
Use addition CURRENCY when outputting WA_RECORD-V_EXBAS
Use auxiliary field when outputting with MESSAGE
Use addition UNIT when outputting WA_RECORD-LGMNG
Use auxiliary field when outputting with MESSAGE
But in output no need to display the currency reference field, and also no hexadecimal code to comment this error.
Error :2
Table UT_SOURCE[] and its header line ,Field string UT_SOURCE is not referenced statically in the program.
The above error is coming in FORM/PERFORM.
Error :3
Syntax check warning
This warning is only displayed in SLIN.
where matnr = wa_record-v_matnr.
^
Messages:
In "SELECT SINGLE ...", the WHERE condition for the key field "SPRAS" does not test
for equality. Therefore, the single record you are searching for may not be
unique.
To clear this error i used SELECT...UP TO 1 ROWS ,but in this we need to use ENDSELCT and it will create performance issue ,if its used inside LOOP ENDLOOP and also outside the LOOP.
Error :4
Syntax check warning
This warning is only displayed in SLIN.
gjahr = ibkpf-gjahr ebeln = <wa_likp>-vgbel ebelp = <wa_likp>-vgpos.
^
Messages:
Assigning to "EBELP" may result in data loss. transported.
Give me any idea to clear the errors. Its very urgent.
Regards,
Ram.

Hi Chandrasekhar,
Thankx for ur quick reply.
In Error # 2 ,
The internal table UT_SOURCE is used in program ,so i cont deleted that.
its used in ,
form fill_sourcefiles tables ut_source type txw_vdt_sourcefile_t.
data: ls_source like line of ut_source.
In this point i am getting error like,
Table UT_SOURCE[] and its header line ,Field string UT_SOURCE is not referenced statically in the program.
How to clear this error.
One more error i am facing ,
Field string VBFA is not referenced statically in the program
but it is used in one query .how to clear this error and also i am not able comment with Psedo comment .
Its urgent.
Regards,
Ram.

Similar Messages

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps.

How to clear the error message?

I use the <h:message> tag to show the error message, how can i clear the error message in jsf , is ajax4jsf can do so? thanks!

The messages are request scoped. Why do you want to clear it anyway? Once no error is occured, then no message will be displayed.

BADI ME_PROCESS_PO_CUST - DOES NOT CLEAR OUT ERROR

In ME21N I want to validate the field Commodity Code - STAWN. I have used the BADI ME_PROCESS_PO_CUST*
. Have used get_foreign_trade() in the PROCESS_ITEM method . I am able to throw an error . It is doing it but*
after throwing error then when we give a valid Commoditycode too it is still showing the error and not clearing the error .*
As suggested by Dean Q I used INCLUDE mm_messages_mac,
tried im_item->set_foreign_trade( ls_mepo_eipo) still when a valid Commodity code is entered after an invalid one it does not clear out the error. In fact on checking using break-point I found that the second time it does not enter into the method PROCESS_ITEM. Any help is welcome
Nivedita

Hi,
In SE18 give ME_PROCESS_PO_CUST as the enhancement spot and display. At the left side of the screen you can see the badi definition ME_PROCESS_PO_CUST. Expand the tree and double click on implementations. You can see the enhance implementations created. Double click on the enhancement implementation and in that screen there is a check box 'Implementation is active' and field 'Effect in current client'.
If you know the enhancement implementation name(not the badi implementation name), you can check it directly from se19.
Regards,
Poornima

How to clear this error?

Please any one share idea to clear this error while deploying App
Severity Code
Description Project
File Line
Error Error : DEP0700 : Registration of the app failed. Deployment Register operation with target volume C: on Package b7e84a3b-2768-4e38-989d-c2cb2b4ebac1_1.0.0.0_neutral__p1rwhdjzffatw from: (C:\Users\shiva\Desktop\App15\App15\bin\Debug\AppX\AppxManifest.xml)
failed with error 0x80073CFD. See http://go.microsoft.com/fwlink/?LinkId=235160 for help diagnosing app deployment issues. (0x80073cfd)
App15

Hi Berkvaz,
0x80073CFD looks more like an environment issue, could you tell us your current operation system also your develop environment?
I would recommend you give a try following steps to see if it can fix the problem: delete the cached file of this app in “C:\Users\<UserName> \AppData\Local\Packages” folder. Please retry your app after deleting.
If this doesn’t work, we should do more steps for future troubleshooting. Have you tried to create a new blank project and then debug it, can it work or throw the same error? If so, please repair your visual studio to see whether it will fix.
Please try and let me know the result.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to clear COGI Error...???

Hi All,
Need your help to clear COGI Error.
Actually some how for one process order, two confirmation happened.
Scene 1 : When first time did confirmation then automatically without any error display came process order saved but all goods movement failed.
Scene 2 : Then for the same without checking COGI error, did second confirmation and then it worked perfectly. Process order got saved without any fail.
Scene 3: When doing TECO its showing Post processing Error.
So checked by COOISPI and found two confiramtion done for one process order.
Now when doing COGI the FERT movement is not happening. Its showing deficit of stock. But smae stock is available in MMBE.
Pls help me in resolving the same.
If any query pls contact me. Its urgent
Regards
Anish Vema

Hi Anish,
Surprised how you can see two documents though one is error in posting.Please check the stock and type of stock in specific storage location.
As well I will suggest to do the below setting in OPK4 for future error prevention.
Please check the boxes in OPK4.
Please don't delete COGI error which is a bad practice.
Please revert back for further query.
Regards,
Krishnendu.

EPC Error:-

Hi Everybody,
                    In one of my reports I am having an EPC error .... The error is as below.
"At position OUTPUT, parameter transfer may no longer be allowed after a structure
enhancement. ".
and the code wher ioits showing this error is as below....
try.
    CALL METHOD obj_vendmas->naagsapvendor_master_async_out
      EXPORTING
        output = i_output.                            <----
(This is the point of error)
    COMMIT WORK.
    CATCH cx_ai_system_fault INTO l_exc_ref .
Please guide me.......

It may be due to that both the structures are not same, check out the structure in the method and the structure which you are passing to the method

Clear cartridge error message, Photosmart c410a

All troubling shooting steps have been taken but can't get the error message to clear. Printer won't print with it.

Hello GMaga,
I noticed the issue you are having with your Photosmart C410a model showing a cartridge error. I would like you to review all of the steps in the troubleshooting guide below to make sure you have attempted them all. Usually the guide will help clear the error.
'Incompatible Cartridge' or 'Ink Cartridge Problem' Message Displays on the Control Panel
If the issue persists, you will notice the instructions will state to replace the printhead. If that happens, call HP's Technical Support to see about your replacement options. If the warranty has expired you can also try Soaking the Printhead by Bob_Headrick. Please read the instructions very carefully if you wish to do this step.
If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Capturing EPC error List into a local file using BDC

Can anyone let me know the Code for downloading the EPC check Results into a local File using BDC...[<b></b>

You can use the function module
EXTENDED_PROGRAM_CHECK to get the errors and warnigs of a epc for a program.
then you can download that internal table information using GUI_DOWNLOAD fm.
Regards,
Ravi

Change Qty to 0 to clear COGI errors

Hello everyone,
I've been giving a temp job as a sort of MRP Controller for a materials handling company in the UK and have been given the task to clear the COGI errors. I'm new to this part of SAP as I used to work as an operator so never used any logistic or sales modules. Basically I think I have worked out what a COGI is and in princible about how to clear them. The orders have finshed and it is trying to backflush the material stock levels. The problem I am encoutering is this materials were used in orders early last year. The product has been made and shipped off to the vendor. I can see the stock being removed from the system months later in a stock check. The original backflush never happened as a lot or Materials never had the corect storage location. Anyhow, Can I clear these COGI's and the relevenant OrdRes on the materials by changing the COGI qty to 0 and then processing them? When I check the component list for the production order they go through as finialised (FLS is ticked), the OrdRes is removed however will this cause problems I'm unware of? I need to know if doing this right otherwise I need to get people to add the stock back in to clear the backlog and I have many to do and the process is painful and I want to sort this ASAP as the system is raising purshase requitions for parts need nearly a year ago and been built and sent off site!
Any help would be great...
Adam

Hi,
To do this you have to do following steps,
1. In the COGI list go to Edit - > Replace -> Date.(CtrlShiftF10)
2. Change the date to current date. This is required because the old posting periods will not be open for postings.
3. Select the line & click on Change details (F5).
4. Change the quantity to 0 (Zero).
5. Post the document.
Thanks,
Navin

Do you have any idea about EPC error? If yes, Please come in.

Hellow
: please try to solve the EPC-INIT failed epc-95 error which arbitrarily raises any day, we can not say that it raises only during peak time.It comes arbitrarily any time any day. Initially it was use to come after every 5 to 10 days But now its frequency has been increased.
I have checked it out from documentation but there is ample space in ORACLE_HOME.
Is it having any relation with other errors as follows which also coming at different times.
1) General error on user screen not on server. which results into loss of connection with the server. user again have to enter there identities.
2) virtual memory problem, now set high.
3) Less redo log buffers space, which results into high no. of redo buffer allocation tries. This i will increase it soon.

You may be running into Oracle Trace errors. here is some info from Metalink
Oracle Trace can cause Unusual Server Problems
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle Trace was introduced in Oracle7 release: 7.3.2.1
It is enabled by default (when installed) in 7.3.2 onwards.
Platforms Affected
~~~~~~~~~~~~~~~~~~
Oracle Trace is enabled by default on:
     Most Unix platforms     7.3.2 onwards
     Windows NT           7.3.3 onwards
Description
~~~~~~~~~~~
Oracle Trace is a common tracing mechanism which is automatically
enabled in Oracle 7.3 on many platforms. Products instrumented with
Oracle Trace include:
SQL*Net v2.3 , Net8
Oracle Server 7.3 , 8.0 and higher
Oracle Forms 5.0
Unless specific actions are taken Oracle Trace may be enabled when it is
not required.
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
On Unix platforms it is quite likely there is some impact from Oracle
Trace being enabled, even if this is only a small performance degradation.
Most of the problems are fixed with Oracle 7.3.3 but it is still sensible
to disable Oracle Trace if it is not required.
Please Note: Oracle trace works well if correctly configured and used
in a targeted manner. The problems described here can
occur when Oracle Trace is not configured and is widely
enabled , especially with 7.3.2.
Possible Symptoms
~~~~~~~~~~~~~~~~~
Widespread use of Oracle Trace can have a number of apparently mysterious
side effects including:
- Very slow database connect times
- Poor Oracle response times
- High disk space usage by the file 'process.dat'
- Oracle errors attaching to the SGA, such as ORA-7307 or ORA-7337
- Protocol errors (such as TNS-12164) errors from SQL*Net
- Sessions aborting or hanging when connecting to the instance
- Bus errors and/or core dumps from SQLPLUS or SVRMGRL
- Shadow process fails to spawn and you receive ORA 12547
- Trace files being written to the default USER_DUMP_DEST rather
than the actual setting of USER_DUMP_DEST
- Zero length trace files
- Connect internal prompts for password
- Errors of the form "ORA-7445 [epcrid_next()+452] [SIGSEGV]"
in some Oracle 8.0 releases
- A hanging listener on 8.1.6 which was fixed by disabling otrace.
- An intermittent 12500 error on 8.1.5 was fixed by disabling otrace.
- One Customer upgraded his sun os from 2.6 to 2.8.
After the upgrade of the os, customer started receiving ora-12223
errors when trying to start up svrmgrl and the listener. Through
a top session, customer could see svrmgrl consuming excessive memory
until memory was exhausted.Disabling otrace solved this issue.
Workaround / Patches
~~~~~~~~~~~~~~~~~~~~
There are no patches available.
Two workarounds exist:
A. If you wish to disable Oracle Trace totally you simply need to
     remove the '*.dat' configuration files.
B. If you do wish to disable Oracle Trace for specific processes
     only you can use the EPC_DISABLED environment variable. Setting
     this to TRUE will DISABLE tracing.
Workaround A - No Oracle Trace output required:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1. Shut down all databases and listeners.
2. Remove the Oracle Trace files:
     Unix                    NT
     ~~~~                    ~~
cd $ORACLE_HOME/otrace/admin     cd orant\otrace73\admin
rm -f *.dat               del *.dat
                         Reboot the NT server
Workaround B - Disable Oracle Trace on specific connections
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NB: This workaround is not applicable to NT.
1. Shutdown and remove the trace configuration files as in Workaround A.
2. Reinitialise the Oracle Trace files by typing 'otrccref' in
     the otrace/admin directory.
3. To disable Oracle Trace for a particular session set the environment
     variable EPC_DISABLED to TRUE.
Eg: In a Bourne script:
EPC_DISABLED=TRUE; export EPC_DISABLED
In the C-Shell:
setenv EPC_DISABLED TRUE
4. To set EPC_DISABLED=TRUE for SQL*Net connections you can modify
     the 'SID_LIST_listener' clause in the 'listener.ora' file and add:
(ENVS='EPC_DISABLED=TRUE')
to the SID_DESC for each 7.3 database. Add the entry AFTER the
(ORACLE_HOME=...) clause.
Eg:
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=DB1)
(ORACLE_HOME=/oracle/OFA_base/app/oracle/product/7.3.2)
(ENVS='EPC_DISABLED=TRUE')
(SID_DESC=
(SID_NAME=DB2)
(ORACLE_HOME=/oracle/OFA_base/app/oracle/product/7.3.2)
(ENVS='EPC_DISABLED=TRUE')
     By using two listener processes you can have one SQL*Net alias
     which allows tracing and another that has tracing disabled.
5. Restart and databases and SQL*Net listeners.

Got error(JS alert message) that "Given key was not present in the dictonary". After clearing history error gone. Not getting answer?

I have asp dotnet website and when I am log in into it then I got an js alert message i.e.
"Given key was not present in the dictonary". When I am going to clear clear browser history then it working fine without error. We know it thats why we are clearing history but client don't know and they dont want to clear history. So Is there solution
of this problem. please suggest me.

Hi Vishal Shivade,
Please post in ASP.NET forums, where you could get better help.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to clear bundle errors

In ZCC when I look at the Message Summary on the Home screen, I have a list of bundles that are reporting errors. So, I click on the hyperlink with the number of errors to see the list of bundles with errors. I attempt to acknowledge all messages, however the "Number of errors not acknowleged" remains, therefore these bundles continue to appear in my error list. When I click to Refresh the events for the message log, I am getting: "No Items Available" as if there are no errors.
How can I get these errors that don't exist to clear?
ZCM 10.3.1

jfountaine,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Clearing Account Error (T043G)

Hi,
While posting incomming payment from customer, posting through Transaction Code FEBA_Check_DEPOSIT(Postprocessing Check Deposti Trans.), the system giving message Company code 1300 is missing Table T043G.
The message iam getting while clearing customer line Items through TCode F-32
Please help me
Points will be awarder accordingly

Hi
It seems that the tolerance group earlier used was deleted.
To avoid this error message:
Either you have to add Tolerance group for the referred Comp. code in T.code OBA3
Or if you find an appropriate tolerance group in the related customer master, attach the same. In customer master, you can find tolerance group under Payment transactions tab of company code data.
Hope this helps.
Regards

How to clear status "Error in process"?

Hi All,
I need help to clear the status of my invoice in SRM. The invoice status is "error in process". We checked in backend and reprocessed the IDOC through WE19 instead of BD87 and the invoices are posted now in backend. But the status of the invoices still shows "error in process" in SRM. I do understand that we should not use WE19 and should have processed it through BD87.
I checked in SRM and the enteries exists in BBP_DOCUMENT_TAB table for these invoices, just tried to run CLEAN_REQREQ_UP and BBP_GET_STATUS_2 but no help.
Please help
Thanks, Sachin

please read all below
An IDoc BBPIV is sent if an invoice is released in the BBP system.In the invoice the statuses I1022 "Release granted" and I1017 "In transfer" are set.In addition, for the background job (see below) an entry is written to table BBP_DOCUMENT_TAB.
Unless I1017 is not set again to inactive, all previous operations are not allowed (in particular all changes to the invoice), that is, they are stopped by the program. The sending of the IDOC is checked by the background job CLEAN_REQREQ_UP. The report reads the BBP_DOCUMENT_TAB and makes a RFC (remote function call) per META_GOODSMVT_UPDATECHECK to check the posting of inbound IDocs.If the IDoc is posted successfully (status 53), the BBP invoice receives status I1018 "Transferred to backend".In addition, the entry is deleted in BBP_DOCUMENT_TAB.
If the IDoc is posted incorrectly (status 51, no follow-on document), the status of the invoice is set to I1019 "Transfer failed".The entry in BBP_DOCUMENT_TAB remains as is, that is, the status of the IDOCs in the backend system is still checked by the background job.The sending of the IDOC is checked by the background job CLEAN_REQREQ_UP.If the IDoc has not (yet) arrived in the backend system, the entry also remains as is.
Status I1018 allows to reverse the invoice in the future. In case of status I1019, a deletion is (again) possible.
The following must be considered when processing an incorrect IDoc in the backend system:
a) Further process the same IDoc (BD87), instead of copying and correct the IDoc with Transaction WE19 since in the latter case, the background job cannot find the (copied) IDoc and the invoice posted from that. In this case the BBP invoice would remain endlessly in status "incorrect", the entry in BBP_DOCUMENT_TAB would never be deleted and the background job would always make the RFC at every run.In addition the BBP invoice would never receive the status "paid" (see below).
b) If the IDoc cannot be corrected or the error in the backend system cannot be solved, the IDoc remains in status "incorrect".In this case the BBP invoice should be deleted and the entry in BBP_DOCUMENT_TAB should be deleted manually or with a self-written report.
Additional information: As of EBP Release 4.0 or after the implementation of Note 601470 or the import of the relevant Support Package, the entry in BBP_DOCUMENT_TAB is deleted by the program (during the deletion of the invoice). Then the manual deletion is no longer required.
The following section does not correspondingly apply to the confirmation, but only applies to the invoice.
Status I1020 "paid" is set in the invoice by using the second background job BBP_IV_UPDATE_PAYMENT_STATUS to check the payment status of the follow-on invoice in the FI backend system for all invoices from the selection area.This only occurs for BBP invoices with status I1018 "Transfer to backend". To read the FI documents, META_FI_DOCUMENT_READ_40B is used.

Clearing EPC errors

Similar Messages

Maybe you are looking for