CLI0615E Error receiving from socket, server is not responding.

We recently changed a web application using DB2 5.2 tables from ODBC to JDBC. We are using the COM.ibm.db2.jdbc.net.driver. We are using a
connection pool and running on iPlanet.
We are getting intermittant "CLI0615E Error receiving from socket, server is not responding errors". We have looked in the JDBC forum and DB2 support and cannot find a reasonable answer to this problem. It is NOT always on sql statements that take a long time to execute, so I don't think it is a timeout issue.
I read something about "stale connections". Does anyone know how to check to see if this is a problem?
When we first converted the app, we had a lot of problems also with "invalid handle or statement is closed" which we have determined was being caused by the user submitting the page again before it had time to finish the first time. We have put in javascript code to prevent multiple submits. Could this server not responding problem be caused by double submits that we have not located yet?
The error is NOT occuring on any one page, and the same page will run correctly once and the next time throw this error.
Any suggestions would be greatly appreciated.
Thanks.
[29/Apr/2003:11:00:20] info (42196): COM.ibm.db2.jdbc.net.DB2Exception: [IBM][JDBC Driver] CLI0615E Error receiving from socket, server is not responding. SQLSTATE=08S01
     at COM.ibm.db2.jdbc.net.SQLExceptionGenerator.throwReceiveError(SQLExceptionGenerator.java(Compiled Code))
     at COM.ibm.db2.jdbc.net.DB2Request.receive(DB2Request.java(Compiled Code))
     at COM.ibm.db2.jdbc.net.DB2Request.sendAndRecv(DB2Request.java(Compiled Code))
     at COM.ibm.db2.jdbc.net.DB2RowObject.next(DB2RowObject.java(Compiled Code))
     at COM.ibm.db2.jdbc.net.DB2ResultSet.next(DB2ResultSet.java(Compiled Code))
     at bom.Bom.getDefs(Bom.java(Compiled Code))
     at jsps.bbapps._eng._ENGJGLT0_jsp._jspService(_ENGJGLT0_jsp.java(Compiled Code))
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
     at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:464)

hi,
lemme try to tell u what i thinkk..i dont think its' a solution
Usually this error code means that there was some problem while the driver tried establishsing a socket connection to the remote server. You could very well avoid this by tracking out what is preventing the socket connection.. it may be network congestion or some other onfiguration problems with the network, or with the DB2 server...
But if the same application could work perfectly with jdbc-odbc driver in same environment,then it needs some attention.either the ibm driver isn't throwing the error as expected by the iplanet or iplanet isn't acting as needed when such an error is thrown.
contact them and they may provide and explanation..
wishes,
Jer

Similar Messages

SSRS in SharePoint2013:Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModule

SSRS in SharePoint2013: There is a report in SharePoint and it contains a sub-report and the sub-report hyperlink. When I click the hyperlink to go to the sub-report, after >10min, I click the "Back to.." button
on IE to go to the previous page. Then it catch the error as:
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.
I am using SQL2012 and Sharpoint2013.

Hi Alisa,
Thanks for your reply, I changed the web.config, but the issue did not resolved.
I add the codes in two parts of the web.config as below, you can find in by keywords “aspnet:MaxHttpCollectionKeys”
This issue can not reproduce on Chrome only occur on IE.
So, do you have some details suggestion for me to fix it?
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<configuration>
<configSections>
<sectionGroup name="SharePoint">
</sectionGroup>
<location path="_layouts/15/TA_AppMonitoringDetails.aspx">
<appSettings>
<add key="ChartImageHandler" value="storage=memory;timeout=20" />
</appSettings>
</location>
<location path="_layouts/15/ReportServer/RSViewerPage.aspx">
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
</appSettings>
</location>
<system.net>
<defaultProxy />
</system.net>
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
<add key="aspnet:RestrictXmlControls" value="true" />
<add key="FeedCacheTime" value="300" />
<add key="FeedPageUrl" value="/_layouts/15/feed.aspx?" />
<add key="FeedXsl1" value="/Style Library/Xsl Style Sheets/Rss.xsl" />
<add key="ReportViewerMessages" value="Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
</appSettings>

Firewall: Error sending to the socket, server is not responding.

Hi all,
I'm trying to connect AIX machine to NT DB2 Database through JDBC with a firewall. I'm using the standard port 6789 in JDBC Applet Server in NT DB2. But I've gotten the following message:
COM.ibm.db2.jdbc.DB2Exception: [IBM][JDBC Driver] CLI0614E Error sending to the socket, server is not responding. SQLSTATE=08S01
The connection chain I'm using for AIX side is:
jdbc:db2://192.168.3.4:6789/DATABASE
I've configured the firewal to allow the port 6789 to be used, and also the other port 51544 (it's for remote administration, I think). I've also checked that wires and other stuff is working fine, but stil I cannot connect to the Database.
I don't know if there's something missing on the firewall configuration. Before, everything was working without the firewall.
Any help will be apreciated, THanks.
Rodrigo, SPAIN

It looks like no port problem is happening, because we freed all the ports just to see if client tried to use some of them without our knowing. But it was still the same.
We were thinking about routing issues, but we were able to ping from client to server, and ports 6789 and 51544 were open as well. Maybe JDBC Client Driver is looking for an different IP address than 192.168.3.4. We know the firewall doesn't receive any query from JDBC Client, and that's very strange because if you see the routing tables in AIX machine, the default route is the firewall. Of course, there's not any other static defined route for the server (192.168.3.4), so it's supposed that default route is going to be used. But it's not.
We also restarted client machine from scratch but nothing. Maybe this problem happens because there's something wrong in AIX networking settings.
Rodrigo

SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
   --- End of inner exception stack trace ---

Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error receiving from socket when data truncation occurs

I am using a PreparedStatement that has a "character" column of a set length (2). It also has a constraint set up of valid entries (H, AS, AR).
When I put valid data into the field, the update works fine. If I enter invalid data of the correct length it gives me the constraint error. However if I put an entry that is too long (and of course is not valid), I get the socket error. I am using setString since there is no setChar, which seems to work fine except in this situation.
My prepared statement has 41 fields to "set". If I cut the number of
fields down to 26, I start getting the CLI0109E String data right truncation. SQLSTATE=22001 error on the field in question. If I set 27 fields on the PreparedStatement, the program never returns from the
executeUpdate();
Any sugguestions?

Validate the length before putting it in the statement.

The length received from the server does not match the expected length

Every time I attempt to transfer a tv show or movie from my mac mini library to my work laptop library, I receive the above error - any ideas?

I found this plugin which solved pretty much all of my mail font rendering problems. It is designed for Lion, so don't know whether it will work but thought I would offer it up.
http://noware-it.zxq.net/

I have Photoshop CS5 and everytime I attempt to check for 'updates' I receive an error message stating "The server is not responding ....." It doesn't matter what time of day or how often I try. It's constant and I have a screenshot I can share if I can a

Any suggestions as to what to do?
I'm running Windows 8.1 and it happens both in the 32-bit and 64-bit applications
Tom

You can find the latest updates for CS5 here: Adobe - Photoshop : For Windows
You can download and install those updates if you have not already.
CS5 is no longer sold or supported, so will not be getting new updates.
Since I'm a volunteer and not an employee, I can't say when the server will be online.
Gene

Error message 'The remote server is not responding in a proper manner. Please retry after a few min

We have high security at the company so I'm wondering if there is an issue with the firewall settings not letting adobe in. The progress bar when trying to run CreativeCloudSet-Up.exe only gets to about ten percent of the way before this error appears.
I've tried the help desk chat and was asked to change the folder name C:\Program Files (x86)\Common Files\Adobe\OOBE to C:\Program Files (x86)\Common Files\Adobe\OOBEOLD - this had no effect. I acctually get a registration error now when opening my CS6 apps. Anyone know how to fix this?
Thanks

Anything is possible in a corporate network environemnt, but without exact info nobody can know. as a start, refer to this:
Sign in or activation errors
Mylenium

New-SPWOPIBinding throws "WARNING: The server did not respond".

Hi,
    I have installed the office web apps in another server. Which is in another domain, sharepoint server is in another domain. Both were in various Lan. I am now trying to configure the office web apps in sharepoint.
When i enter the command
New-SPWOPIBinding -ServerName <WacServerName> -AllowHTTPI get an error as WARNING: The server did not respond. Trying again (attempt 1 of 5).
WARNING: The server did not respond. Trying again (attempt 2 of 5).
WARNING: The server did not respond. Trying again (attempt 3 of 5).
WARNING: The server did not respond. Trying again (attempt 4 of 5).
WARNING: The server did not respond. Trying again (attempt 5 of 5).
New-SPWOPIBinding : Sorry, we have encountered an error and New-SPWOPIBinding
has failed.
At line:1 char:1
+ New-SPWOPIBinding -ServerName server.contoso.local -AllowHTTP
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (Microsoft.Share...tNewWOPIBinding
   :SPCmdletNewWOPIBinding) [New-SPWOPIBinding], SPCmdletException
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewWOPIB
   indingI don't know what i was missing. i don't have idea what to do. Can anyone how to resolve this and why it's showing.I already checked the link http://blog.blksthl.com/?s=https#step3. But i couldn't understand this. can anyone tell me what to do. What am i missing !Thanks in advance,Rajendran.K

Hi Paul,
i hve the same problem and i can get the XML in Sharepoint server but when i execute this:
PS C:\Users\administrador> New-SPWOPIBinding -ServerName XXXXXXXXXXXXX
.com -AllowHTTP
WARNING: The server did not respond. Trying again (attempt 1 of 5).
WARNING: The server did not respond. Trying again (attempt 2 of 5).
WARNING: The server did not respond. Trying again (attempt 3 of 5).
WARNING: The server did not respond. Trying again (attempt 4 of 5).
WARNING: The server did not respond. Trying again (attempt 5 of 5).
New-SPWOPIBinding : Sorry, we have encountered an error and New-SPWOPIBinding
has failed.
At line:1 char:1
+ New-SPWOPIBinding -ServerName XXXXXXXXXXXX.com -AllowHTTP
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Microsoft.Share...tNewWOPIBinding
:SPCmdletNewWOPIBinding) [New-SPWOPIBinding], SPCmdletException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewWOPIB
inding
i use HTTPS and that is the only error text from SP logs. I can ping owa server from Sharepoint server (internal and external URL). both machines are in the same VLAN.
what can i check to verify i have everything OK?
many thanks.
josetellan

"The L2TP-VPN server did not respond"

I just bought an Airport extreme base station, and installed lion server, and configured it for VPN. I have checked all my settings and even looked using AirPort utility. I have tried connecting to my VPN from 2 different Macs and an iPad, and all yield the same error:"The L2TP-VPN server did not respond". When I look at my vpnd.log it is pretty bare:
2011-08-31 18:27:34 EDT Loading plugin /System/Library/Extensions/L2TP.ppp
2011-08-31 18:27:38 EDT Listening for connections...
it looks like the VPN connection requests aren't making it from the airport to the server. Any ideas

FWIW, my Lion Server VPN issue has been solved...
https://discussions.apple.com/thread/2696981?start=30&tstart=0

IVPN starts, but "the pptp-vpn server did not respond. Try reconnecting."

Hi. I am new to VPN, and I just got the software iVPN from Macserve, and the server starts successfully, using either PPTP or L2TP:
But the connections from my network do not connect. Every time I click on "connect" for either network connection, I get the error "the pptp-vpn server did not respond. Try reconnecting."
I set up both connections in my Network Preferences according to the support page (http://macserve.org.uk/support/ivpn/):
My Airport Express configurations have never given me any problems with my home network:
And I think that I forwarded the ports properly (even though my firewall is not activated):
What am I doing wrong?

The Apple routers can be a problem on vpn passthrough.
Ports that are required for vpn are more complicated ..
See earlier post.. eg How do I set up L2TP VPN?
Ports for PPTP which you have opened manually.. are not valid for L2TP.. so you need several more ports opened.
The problematic ones are GRE and ESP which are protocols not ports.
I think you can pretty well assume the apple router running anything that has BTMM in it won't work.. since it will need the port 500 for itself.
On the old express try going back to 7.6.1 firmware.. I have to say I don't use the express.. lots of extreme and TC.. so their firmware issues are slightly different so firmware versions for the express are somewhat different.
Try not to use both port forwards (mapping if you must).. and DMZ.. they can fight each other.. if DMZ doesn't work it is better to turn it right off and forward all the required ports.
Let me recommend a test.
Plug your cable modem directly into the computer running the VPN.. so you have no NAT router in front of it.
Pay attention to the local firewall that apple runs and what ports you will need to open on it to get vpn to work.. this is your best chance to get remote vpn running. If you fail with the public IP on the computer it will certainly fail through NAT.. and generally local firewall will be an issue.
You should of course test that a client in the local lan can connect by the vpn.. it is always worth testing from the easiest configuration to the most complex.
So local lan just as you have now..
Then direct cable connection to the computer.
Then NAT router.. but you can pretty well assume apple routers are going to be problematic because apple want to dally at BTMM using same ports as IPSEC uses for L2TP.
My email is live.. roll your mouse over it and talk to me direct..

Error on ASA5505: "IKE Receiver: Error reading from socket."

Hi,
I'm expecting a problem with the network of a customer.
He has one ASA5505 connected to 2 RV082 using VPN IPSec (1 top office and 2 remote sites).
Each sites have 2 internet ADSL providers: "Provider A" and "Provider B" for backup purpose.
The remote site 1 has the default connection using "Provider A" network on both sites (top office and remote site) and "Provider B" for backup purpose.
While remote site 2 has the default connection using "Provider B" network on both sites (top office and remote site) and "Provider A" for backup purpose.
(Kind of load balancing when all connections are working good)
When all "3 sites x 2 =" 6 connections are working, I doesn't have any problem and all is working good.
But since 2 weeks, the "Provider A" of the top office is disconnected: both remote site uses "Provider B" and are connected to the top office on
the "Provider B" connection. ("Provider A" is no longer used on every sites.)
This configuration works good until a short disconnection appear on "Provider B" connection on "Site 2".
Then I have many "IKE Receiver: Error reading from socket." on the ASA5505 syslog and the RV082 located on "Site 2" says it's connect but it isn't. (It is not possible to ping "site 2" from top office network.)
If I force this RV082 to reconnect, I can from the top office, ping "Site 2" and open a remote desktop session to the server located on "site 2".
But I cannot ping top office network from "Site 2" and I cannot open a remote desktop session to the server located on "top office"
(it's very strange I can ping from a A network to a B network but not from B to A).
Restart the RV082 of the "Site 2" and/or the ASA5505 does not fix the problem and I continue to get the IKE socket error message.
To fix the problem until next "Site 2" "Provider B" disconnection, I have to disconnect or restart the RV082 located on "Site 1" and then do the same to the RV082 located on "Site 2".
I use updated firmware: RV0XX-v4.1.1.01-sp.bin for both RV082 v3 and asa843-9-k8.bin for the ASA5505.
ASA routing part :
# 192.168.1.0 is the network of the top office
# 192.168.2.0 is the network of site 1
# 192.168.3.0 is the network of site 2
# 192.168.20.2 is the @IP of the "Provider A" internet router located on top office
# 192.168.21.2 is the @IP of the "Provider B" internet router located on top office
route outsideLB 0.0.0.0 0.0.0.0 192.168.20.2 128 track 1
route outsideFB 192.168.3.0 255.255.255.0 192.168.21.2 128 track 2
route outsideLB 192.168.2.0 255.255.255.0 192.168.20.2 128 track 3
route outsideFB 0.0.0.0 0.0.0.0 192.168.21.2 150
route outsideFB %Site2_ProviderB_PublicIP% 255.255.255.255 192.168.21.2 5
route outsideLB %Site1_ProviderA_PublicIP% 255.255.255.255 192.168.20.2 5
route outsideFB 192.168.2.0 255.255.255.0 192.168.21.2 150
route outsideLB 192.168.3.0 255.255.255.0 192.168.20.2 150
sla monitor 10
type echo protocol ipIcmpEcho %ProvideA_IP_of_a_SMTP_Server% interface outsideLB
frequency 5
sla monitor schedule 10 life forever start-time now
sla monitor 20
type echo protocol ipIcmpEcho %Site2_ProviderB_PublicIP% interface outsideFB
sla monitor schedule 20 life forever start-time now
sla monitor 30
type echo protocol ipIcmpEcho %Site1_ProviderA_PublicIP% interface outsideLB
sla monitor schedule 30 life forever start-time now
Thanks,
David
neithe

isConnected means was ever connected.
Check whether isr is closed. If so, the server has disconnected/closed the connection.

I cannot copy and paste details from my bank statement into a word document, without the formatting changing.I have a message in my Error console which reads: server does not support RFC 5746, see CVE-2009-3555

Since transferring data from my desktop to my laptop, i am now having problems copying and pasting details from my bank website in to a word document, the formatting is all over the place. This didnt happen before, when i pasted the details in to the word document the formatting was exactly the same as on the webpage. If I use internet explorer, I dont have this problem, so, I can only assume it has something to do with Firefox. I have checked the "Error console" and I am receiving this message: server does not support RFC 5746, see CVE-2009-3555.

Maybe:<br />
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

Msg 0, Sev 0, State 1: Unknown token received from SQL Server [SQLSTATE HY000] String data, right truncation [SQLSTATE 01004] [SQLSTATE 08S01] error

I'm looking for some general guidance on this complete error:
Msg 0, Sev 0, State 1: Unknown token received from SQL Server [SQLSTATE HY000]
String data, right truncation [SQLSTATE 01004]
Msg 16389, Sev 16, State 1: The connection is no longer usable because the server response for a previously executed statement was incorrectly formatted. [SQLSTATE 08S01]
This error is caused by a SQL Agent Job, but it does not always occur. I understand this could be an issue with SQL dropping the connection, but what is the best way to troubleshoot this?
Thanks,
Phil

Hi philliptackett77,
It would be more helpful for troubleshooting the issue if you post the SQL Server error log and SQL Server version. Additionally, please state what purpose of using the agent job.
Based on my research, [SQLSTATE 08S01] error means communication link failure. If the executed statement returns invalid value in the job, the connection between server and client will fail. This error could be caused by the error of [SQLSTATE HY000] and
[SQLSTATE 01004]. I’d like to share my knowledge about these errors as below.
Quote: String data, right truncation [SQLSTATE 01004]
This error could occur when passing data whose length is larger than the received object,and the passed value is truncated, and returns invalid value. So please check if the data type of the objects are identical and the length of passed value is not larger
than the received object.
Quote: Msg 0, Sev 0, State 1: Unknown token received from SQL Server [SQLSTATE HY000]
The error could occur in the two cases below.
1. If you use SQL Server version 6.50, and execute the cursor in the job step, set the statement options to use a server-side cursor and prepare a select statement on a SQL Server system table. The first execution of the select creates the cursor successfully.
After you close this cursor, if you execute the prepared statement again, the error could occur.
I recommend you to apply the latest service pack firstly. If the error still occurs, you could change your code by using a forward-only cursor instead of a static, keyset, or dynamic cursor on the system tables. If a forward-only cursor is unacceptable,
prepare the select statement again on the system table and execute it to create a server-side cursor. For more information about the process, please refer to the article:
http://support.microsoft.com/kb/151693/en-us
2. The TDS stream from the server is invalid when transfer data between a database server and a client. This error is typically caused by a problem on the server. For more information about errors above, please refer to the article:
http://technet.microsoft.com/en-us/library/aa937531(v=sql.80).aspx
Regards,
Michelle Li

OfficialFile.asmx The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Negotiate,NTLM'. ERROR

We are getting an error on the authentication piece when trying to submit a file to the OfficialFile.asmx web service to submit a document to the Drop-Off Library. Here is the code snippet -
public string FileUpload(HttpPostedFile FileInput, RecordsRepositoryProperty[] properties)
string strFileUrl = string.Empty;
RecordsRepositorySoapClient repository = new RecordsRepositorySoapClient();
BinaryReader b = new BinaryReader(FileInput.InputStream);
byte[] binData = b.ReadBytes(FileInput.ContentLength);
repository.ClientCredentials.Windows.ClientCredential = new System.Net.NetworkCredential(iUserID, iUserPassword, iUserDomain);
repository.ClientCredentials.Windows.AllowedImpersonationLevel = System.Security.Principal.TokenImpersonationLevel.Impersonation;
repository.SubmitFile(binData, properties, null, FileInput.FileName, HttpContext.Current.User.Identity.Name);
strFileUrl = repository.GetFinalRoutingDestinationFolderUrl(properties, null, FileInput.FileName).Url;
return strFileUrl;
Although we are setting the network credential in the client call we still get the error
- The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Negotiate,NTLM'.
Ideas?
Thanks in advance.

Hi,
Based on the error message, the issue is related to the authentication type.
I suggest you can specify the credential type like the below:
CredentialCache credentialCache = new CredentialCache();
NetworkCredential credentials = new NetworkCredential(UserName, PassWord, sDomain);
credentialCache.Add(new Uri(recordCenterUrl), "NTLM", credentials);
Here is a detailed code demo for your reference:
http://blogs.msdn.com/b/mcsnoiwb/archive/2011/06/06/sending-files-to-a-record-center-using-the-sp2010-webservice-officialfile-asmx.aspx
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jerry Guo
TechNet Community Support

CLI0615E Error receiving from socket, server is not responding.

Similar Messages

Maybe you are looking for