Clicking messages in the "sent mail" folder caused the mail program quit

Hi, I use mail from Macbook Pro for my emails for multiple accounts. All the accounts have been working fine, until yesterday, the "sent" folder of one of the account stopped working. Whenever I click on the message I sent, the mail program quit. However, for other email accounts, the "sent mail" folders still working fine as before.
Has anyone encounter similar problem?  how to fix it?
Thanks alot!

Check your settings in your email account. Settings>Mail, Contacts, Calendars - tap on your email account and make sure that all of the settings are as they should be.
If all of the settings are correct - Then try the basics and see if they help with this.
Restart the iPad by holding down onthe sleep button until the red slider appears and then slide to shut off. Topower up hold the sleep button until the Apple logo appears and let go of thebutton.
Reset the iPad by holding down on the sleep and home buttons atthe same time for about 10-15 seconds until the Apple Logo appears - ignore thered slider - let go of the buttons.
Quit Mail and restart the iPad. Go to the home screen first by tapping the home button.Quit/close open apps by double tapping the home button and the task bar willappear with all of you recent/open apps displayed at the bottom. Tap and holddown on any app icon until it begins to wiggle. Tap the minus sign in theupper left corner to close the apps. Restart the iPad. Restart the iPad byholding down on the sleep button until the red slider appears and then slide toshut off. To power up hold the sleep button until the Apple logo appears andlet go of the button.

Similar Messages

  • One shared mailbox with multiple distribution groups connected and the sent items folder - how to configure?

    Hi!
    I have been struggling for a while now with the following issue.
    For starters:
    We are using exchange 2010 in combination with outlook 2013 on client computers.
    Cause of the limitations concerning the number of mailboxes in outlook im looking for a solution to receive and reply 
    to multiple aliasses. So i did the following:
    1. Configured one shared mailbox.
    2. Configured multiple distribution groups
    3.  made the shared mailbox a member of the distribution groups
    4. Configured full access and send as permissions for myself on the shared mailbox ( testing )
    5. Gave send as permissions to the shared mailbox in Active directory. 
    6.  Logged in to OWA to setup rules for the shared mailbox.
    I now receive emails from all connected distribution groups in the shared mailbox and also in the right folder.
    I do however have to select the proper from address when i reply to an email. 
    the email sent by the main SMTP of the shared mailbox is placed into the sent folder of the shared mailbox. 
    I setup the senddelagate blabla in register.....
    When i sent an email as one of the connected distribution groups it fails to put the sent item in the sent items folder of the shared mailbox. The email is sent using the proper address but placed in the sent folder of my main account. 
    I want this emails to end up in the sent items folder of the shared mailbox. Or even better, in a sent items folder for each of the addresses. 
    Any suggestions ? 
    Thanks in advance!

    Hi,
    As what
    Rajkumar says, sending as a shared mailbox(full access permission) will put the email in the sent item of shared mailbox. But it cannot be located in the “sent item” of a distribution group. Because
    it is a distribution group instead of a enabled user mailbox.
    According to your further description, I understand that the reason why you configure that is some users reached the
    limitation about the number of Exchange accounts you can include in the same Outlook profile. Is it rights? If I misunderstand, please point it out.
    By default, user can only add 10 Exchange accounts to the same profile. You can customize the limit to the number Exchange accounts in the same profile using the following registry data:
    Key: HKEY_CURRENT_USER\software\policies\Microsoft\exchange
    DWORD: MaxNumExchange
    Value: integer value starting at 1 (default = 10 if DWORD is missing)
    http://blogs.technet.com/b/outlooking/archive/2012/12/24/clarification-on-outlook-2010-and-additional-exchange-account-supportability.aspx
    Hope it helps.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Sent messages aren't saved in the Sent Items folder in Outlook 2013

    When we send a message in Outlook 2013, a copy of the message should be saved in the Sent Items folder by default. If Outlook doesn’t save a copy of the sent message, it may be caused by any one of the following
    reasons:
    The “Save copies of messages in the Sent Items folder”
    option in Outlook is disabled.
    The save location for sent messages was changed to another folder.
    There is a custom view set on Sent Items folder, or the view on
    Sent Items is corrupt.
    Outlook Data File may be damaged.
    To resolve the issue, use the appropriate method for your situation.
    Enable the Save copies of messages in the Sent Items folder
    option
    To configure Outlook 2013 to save copies of your sent messages in the Sent Items folder, please follow these steps:
    1. Click File tab > Options.
    2. Click Mail on the left pane.  
    3. Scroll to the Save Messages section, select the check box before “Save copies of messages in the Sent Items folder”.
    4. Click OK.
    If it is the replying message that is not saving to the Sent Items folder, we need to disable the “When replying to a message that is not in the Inbox, save the reply in the same folder” option in the location mentioned above.
    If you’re using an IMAP account, please also make sure you didn’t select the “Do not save copies of sent items” in Account Settings. To check this, Please refer to the following steps:
    1. In Outlook, click File tab > Info.
    2. Click Account Settings > Account Settings, and then double-click your IMAP account to open the
    Change Account wizard.
    3. Click More Settings button.
    4. Under Sent Items heading, clear the check box before “Do not save copies of sent items”.
    5. Click OK and click Next to complete the configuration.
    Make sure there is no rule or anything else to redirect sent messages to other folders
    To check if it is caused by Outlook rules, please follow these steps:
    1. In Outlook 2013, click Home tab.
    2. Click Rules > Manage Rules & Alerts.
    3. In the rules list, check if there is any rule that applied to the sent messages may cause this issue.
    In addition, some rules may be corrupt or hidden and we cannot see them from the rules list. We need to use the MFCMAPI tool to find and delete the corrupt/hidden rules. To do this, we can use the following steps:
    1. Download MFCMAPI tool from: http://mfcmapi.codeplex.com/
    2. Start MFCMAPI tool.
    3. Click Session menu >
    Logon, select the Outlook profile you are using and click OK.
    4. Double-click the mailbox that contains the inbox rules that you want to delete.
    5. A new window will open. In the new window, expand
    Root Container or Root – Mailbox, and then expand
    Top of Information Store or IPM_SUBTREE.
    6. Right click on Inbox and select
    Open associated contents table.
    7. In the Inbox window, locate and then right-click the items that have the
    IPM.Rule.Message message class, and then click Delete Message.
    To identify a specific rule, you’ll have to select the rule in the top pane in MFCMAPI and then scroll down in the lower pane and look at the
    Property name(s) column. Find the ptagRuleMsgName property name and check the value against the rule name you were trying to delete in Outlook.
    8. In the Delete Item dialog, select
    DELETE_HARD_DELETE from the Deletion Style drop-down menu.
    9. Click OK.
    Reset the view settings on Sent Items folder
    If you accidently changed the view settings on Sent Items folder, this may cause some sent messages not visible in the folder. To check if you’ve set any view settings on Sent Items folder, please follow:
    1. In Outlook, select Sent Items folder.
    2. Click View tab from the Ribbon.
    3. Click View Settings button. If you notice the
    Reset Current View button is clickable, it means the view settings for Sent Items have been changed before.
    4. Click the Reset Current View button and then check the Sent Items folder again.
    Scan and repair the Outlook Data File
    To repair the .pst file, please follow:
    1. Find and start the Inbox Repair Tool in the following path:
    For Outlook 2013 on a 32-bit version of Windows:
    <disk drive>\Program Files\Microsoft Office 15\root\office15
    For Outlook 2013 on a 64-bit version of Windows:
    <disk drive>\Program Files(x86)\Microsoft Office 15\root\office15
    2. In the Inbox Repair tool, click Browse to locate the PST file by using the Windows file system.
    3. Click Start.
    4. After the analysis scan has completed, it will present you with a scanning report and options for the next step. Click Repair button.
    To repair the .ost file, since this type of data file is a copy of information saved on your mail server, we can just delete the OST file and restart Outlook to re-create a new one.
    For more information about repair Outlook data files, please refer to this article:
    Repair Outlook Data Files (.pst and .ost).
    If you have any comments on this topic, please feel free to post here.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Same problem here, connecting to a Groupwise (not latest) server. Whenever Mail.app 3 tries to upload/save a new messsage to the server, it would not save and completely lose the message!
    I found slightly more information by turning off the "Save to server" option for Sent and Drafts, created a new message that I saved as draft, and then tried to manually move items to the Drafts or Sent folder on the IMAP server.
    The error I received was: The message <message> could not be moved to the mailbox <mailbox>-<account>. The IMAP command "APPEND" (to <mailbox>) failed with server error: APPEND NotJunk.
    To my inexperienced eyes, it looks like the latest version of Mail changed it's default IMAP handling commands that may be incompatible with older IMAP servers. Anyone else have more insight or know how I can get back Mail.app 2.x from Tiger?

  • When I reply to an email, instead of sending it to the recipient, it sends it back to me. I've checked the sent mail folder and the reply is not there either.

    When I reply to an email, instead of sending it to the recipient, it sends it back to me. I've checked the sent mail folder and the reply is not there either. Replying used to work fine, but all of my replies are sent to my inbox, instead of going to the recipient. I've made sure that the recipient's email address is in the send to box.

    Read please this posted by Tanzim
    Cause of the issue
    Gmail webmail accounts do not have separate sent items and inbox folders. The Gmail account web page contains a Sent Mail link on the left side, but this is not a separate folder from the inbox. Gmail webmail messages are grouped into conversations, resulting in all sent messages and replies from others appearing as a single email message entry in the inbox. This allows for easy reading and viewing on the Gmail web page, but, when integrated with the BlackBerry Internet Service account, results in copies of sent email messages arriving on the BlackBerry smartphone as new email messages.
    Resolution
    To prevent sent messages from returning to the BlackBerry smartphone each time, create a filter in the BlackBerry Internet Service account to block the sending of those messages to the BlackBerry smartphone.
    To create a filter, perform the following:
    Log in to the BlackBerry Internet Service account. For instructions on how to log in to the BlackBerry Internet Service account, see KB03781.
    Click the Filters icon next to the integrated Gmail account.
    Click Add a Filter to create a new filter.
    Configure the filter so that email messages are not sent to the BlackBerry smartphone if the email message originates from the Gmail webmail account integration:
    Type a name for the filter into the Filter Name field. For example, My sent Gmail email messages.
    Set the Apply filter when field to "FROM" field.
    Type the Gmail webmail address into the Contains field. For example, <user name>@gmail.com>.
    Select the radio button beside Do not forward messages to device.
    Click Add Filter.
    Note: After creating this filter, email messages will not be received on the BlackBerry smartphone if sent from the Gmail webmail account.
    Source: KB10332 (with graphical depiction)
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.

    Hi,
    I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
    with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
    in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
    Any help please?

    Hi,
    According to your post, my understanding is that you failed to send email after building a fresh site collection.
    I recommend to verify that you have entered your SMTP server name correctly.
    You can add it as FQDN e.g. ServerName.DomainName.
    Here are a similar articles for your reference:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
    http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
    Best Regards,
    Linda
    Linda Li
    TechNet Community Support

  • How to fix "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."

    Hi All,
    I have move dev to production, then workflow facing "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly". Actually it is working fine in dev, in production mail not going. How to fix
    this issue?
    Thanks  in advance! 

    make sure your outgoing email settings are correct and also make sure servers are in exchange rely if you are using exchange.http://sharepoint.stackexchange.com/questions/35353/how-to-handle-e-mail-message-cannot-be-sent-error
    check below blogs: http://www.chrisbuchanan.ca/Blog/Lists/Posts/Post.aspx?ID=2
    another option to put pause in right place:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/6e848a25-019d-4220-aff6-c535da933e0f/the-error-message-in-workflow-history-the-email-message-cannot-be-sent
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • 1 of my 4 pop accounts is not saving sent mail to sent mail folder all the other are

    When I send an email 3/4 of the accounts save the sent email to the sent email folder. 1 account sends the email out but does not save it??? I have updated to the latest version, I have checked that the location where it saves email is the same setting as all other accounts. Please help

    I have 3 pop3 accounts and 1 imap. 1 of the pop accounts is not showing the sent email in the unified sent email folder. The one which is not showing sent email has the same outgoing mail server as one of the other accounts which is showing so i dont think it has anything to do with the email provider

  • The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly

    i have an issue when loading a workflow. it gives me a following error "The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly". it doesnt send me any alerts and worlflow fails at the end
    with the above error message.

    Hi,
    I agree with Bistesh. But after Outgoing e-mail settings are configured properly, if the issue still exists,
    It may result from your Anti-Virus. Please refer to the following steps:
    Open MCAfee Console and go to Access Protection window.
    Click Anti-Virus Standard Protection and edit “prevent mass mailing 
    worms from sending emails” rule.
    Now we need to know which processes are being blocked therefore we need to check the MCAfee Log located at
    C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection\AccessProtectionLog.txt
    you may find entries of DtExec , DtExecUI and DatabaseMail90, now these processes need to be entered in the exclusion list of selected rule .
    Reset the IIS And SharePoint Timer service to check if this works for you.
    Here are some similar issues with you, you can use as a reference:
    http://social.technet.microsoft.com/Forums/en-US/667f0d61-4914-43fa-80c1-8cf430b113bb/workflow-email-not-working-but-normal-email-alerts-working-fine?forum=sharepointgeneralprevious
    http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
    Best Regards,
    Lisa chen

  • Why can't I remove attachments from emails in the Sent items folder?

    I Recently upgraded from Snow Leopard to Lion, and so far, there are at least a couple of things that puzzle me.
    One is that now I don't have the option to "Remove Attachments" from emails in the sent items folder. It seems to work normally
    in the Inbox and Drafts folders, but not in the Sent items. Go figure ???
    Another thing that bothers me is that in Preview, when I save a screen shot, or a scan, etc., I no longer have the option of saving it as a GIF
    (which, when better quality isn't absolutely necessary, is often much lower in KB or MB than a PNG or JPG, etc.. When I store lots of things as such images, I'd rather have that option.
    Any suggestions will be appreciated.

    I have now created a smart mailbox as described above (good idea), and although I have some 50 messages in my Sent box, all with attachments (waiting to be removed so I can store the messages in the proper mailboxes), the smart mailbox is empty. So, Mail doesn't recognise these messages as containing attachments.
    This led me to think that maybe Mail has been redesigned to work the way you would expect it to, at last; to contain a link to attachments instead of including them in all their bits and bytes. That would mean that the messages in my Sent box - with attachments - could be stored in local (or server-side) mailboxes without taking up extensive space.
    But then I checked the size of my Sent Messages folder inside the Mail Folder in Finder, and - whoops - it's 50+ MB. So the sent messages do contain attachments all right. And Mail doesn't recognise these, since a) the smart mailbox trick says that the messages are free from attachments, and b) the Remove Attachments menu option is disabled.
    I will have to wait for the next Mail update, and my Sent box will grow accordingly ...

  • Emails sent from Thunderbird go into the "Sent" folder. Emails from Android phone go into the "Sent Items" folder. MS Outlook sees both, but TB only sees "Sent"

    My university runs MS Exchange server.
    I use MS Outlook on my Univ computer, Thunderbird on my laptop, and exchange email client on my HTC One smartphone running Android.
    Thunderbird saves email in "Sent" folder on the server. Android phone saves it on the "Sent items" folder. MS Outlook can see both the folders, but Thunderbird only sees the "Sent" folder.
    How can I make Thunderbird see the "Sent items" folder?

    assuming you use an IMAP mail account:
    Tools > Account Settings > Copies & Folders for the mail account
    If you want emails saved in 'Sent Items'
    select:' Place a copy in'
    select: 'Other'
    choose 'Sent Items' on account name'
    click on OK
    To see the 'Sent Items folder you would need to subscribe to see it.
    If you have a Pop mail account, it cannot see any folders on the server.
    It can only download emails from server Inbox to Thunderbird mail account Inbox.

  • Why are sent emails not stored in the Sent Items folder in iOS7

    Why are sent emails not stored in the Sent Items folder?

    Thanks, Matt.
    I'm now starting to notice the emails that don't come in order are all posted from sites that use multiple platforms to send the same message; email, Facebook, Twitter, etc. so maybe that has something to do with it. I'm thinking the hold up is possibly at their end.

  • I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder

    I can't open my Itunes keep receiving error message- The iTunes Library.itl file  cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!

    Anyone can help to advice how to solve this issue ?

  • After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes

    After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?

    why did they erase something usefull and easy to use?

  • TS3276 Help - Mail is not sending or receiving any e-mails . Connectivity Doctor is showing green lights.Have rebooted but same issue - just a circle continually going around the Sent mailbox and 2 e-mails waiting in Outbox.

    Help - Mail is not sending or receiving any e-mails . Connectivity Doctor is showing green lights.Have rebooted but same issue - just a circle continually going around the Sent mailbox and 2 e-mails waiting in Outbox.

    Is your web browser working normally?

  • How do I get photos from the iPhoto import folder to the iPhoto library?  It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library.

    How do I get photos from the iPhoto import folder to the iPhoto library?  It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library.  I watched it upload about 400 photos, one by one.  They're somewhere, but they don't appear in the iPhoto library. As iPhoto was deleting them from my camera, it got hung up, then a message came "you should eject before disconnecting a device."  I hadn't touched the camera.  The message came by itself.  I couldn't get iPhoto to respond, so I disconnected the camera and did a Force Quit.  Opening it back up, the pictures were gone.  Can somebody help me? 

    What version of iPhoto are you running?  Assuming it's iPhoto 9 or later Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

Maybe you are looking for