Clickwheel won't work proberly with case

Hi there,
I've got the nano 4g and everything works fine apart from the fact that when using a skin case (soft one) the click wheel is not responsing. I have another identical nano and with that one in works just fine.
What is it? Without the case the two ipod are completely identical in control (sensitivy of clickwheel).
Hope anyone has an idea

You fried it, most likely.
Try powering it off, dry it thoroughly and let it sit for 5 or more days.
Try it then-if it does not work you will most likely have to replace it.

Similar Messages

Infinity won't work wirelessly with Ubuntu OS

I'm running Ubuntu Netbook Edition and upgraded my BT broadband to Infinity on 28.12.11, using the same HomeHub3 that worked perfectly well with the old Total service.
It doesn't work, wirelessly. I can get an apparently strong connection, but its agonisingly slow. At the same time, an ethernet connection works well, When I switch from one to the other and test the speed, I can watch the bandwidth fall away (i.e.: it isn't immediately disconnected.)
Nobody at BT can or will help, telling me that Ubuntu is 'unsupported' (i.e.: it's my problem). I reported this problem to BT - ref: xxxxxx-xxxxxx - via its complaints form on 28.12.11, but have had no response.
I've spent much time this past week on internet help forums. It transpies that BT has known about this issue with Ununtu for six months, but has apparently done nothing about it and cannot suggest a solution.
Suggested workarounds from other Ubuntu users involve manually reconfiguring one's connection, but my netbook won't allow me to apply the changed settings, or to change the router settings from N to G tech., but that only worked temporarily for me and, besides, my netbook is only a couple of year old.
When I was sold Infinity, nobody mentioned that it doesn't work with Ubuntu. Frankly, I feel it was mis-sold as I intended to increase the bandwidth of my Total account and was persuaded to take Infinity on the grounds that it's a superior service for the same price. Not from where I sit, it isn't.
The only solution I can see is to get BT to switch me back to their Total service, which suited me fine. I'm going to get their engineer to come back and uninstall Infinity. I will also complain to Offcom, as this situation could easily have been avoided had the BT sales person told me that Infinity won't work wirelessly with Ubuntu.

Firstly your negotiating skills with BT are far better than mine....
"....Total account and was persuaded to take Infinity on the grounds that it's a superior service for the same price"
I was on BT Total BB and had to pay an extra £2 pm for Infinity and then an extra £4.75pm uplift of the calls package to give me the same anytime calls I had previously.... And had to re-start another 18month contract!!! Ohhh well.
Right onto the problem... Webby's suggestion of making sure your on a clear or least used wireless channel is good advice.
Here is the link to the free software http://www.metageek.net/products/inssider/
Have a look at a demo,- http://www.youtube.com/watch?v=pf2kZCfYTxI
To be honest I would move your HH3 from the Automatic setting to a fixed wireless channel as they seem to work better like that.
If your Operating System won't work with Inssider I would then just try a different channel starting at 1 and work up... seeing how things go.
Regarding setting your HH3 to wireless g, that is a very backward step as the most you'll get over that would be around 20Mbps depending on your distance from hub etc.
Couple of pics comparing my speed test over wireless g and n in THIS POST.
Another thing I would try is a wireless n USB adapter... just in case your m/c is only g
Links of how to identify what yours is and pictures of the difference in the "Network Sharing Centre".. 54Mbps being g and anything above is wireless n....
Wireless n gives the best speed assuming your Infinity download IP is more than 20Mbps. Also wireless n signal is more robust penetrating walls etc.
There are links to the type of wireless n adapters I use... Picture of one HERE, (Don't need the extender cable shown in that picture).
wwwebber's post was very useful.-
"I use Ubuntu on my laptop with BT Infinity & HH3 with no problems at all. BT is not at fault here - they do not support Ubuntu."
Confirming Infinity and Unbunto do work...
You say ".....but my netbook won't allow me to apply the changed settings, or to change the router settings .... but that only worked temporarily for me......"
As changing settings worked temporarily you must have been able to log into your HH3.
If you really can't log in can you borrow a friends netbook running windows to get logged in perhaps?
Log in,- http://bthomehub.home/html/home/home.html go to Advanced settings, wireless. and change Channel settings from Automatic to a channel number then click on Apply.
I would place your laptop near to the HH3 and move the HH3 wireless channel to a clear channel or start at channel 1.
Try to get a good wireless n speed..... example of mine 37Mbps over http://www.speedtest.net/
Then when you have a reasonable speed move your laptop away... you will notice a drop over distance that's normal.
I am 20' away from my HH3 and get 37Mbps through a plasterboard wall.
Regarding other routers people have used http://community.bt.com/t5/BT-Infinity/List-of-Routers-to-replace-Home-Hub-3/td-p/298203
And see Ady's msg #21 and #25 in THIS THREAD.
"'ll try the netbook in different locations over the w/e and hope from a solution from Ubuntu before remonstrating further with BT".
Please let us know how you get on.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Why AdobePPro CS4 won't work properly with Win7 Ultimate OS

Can u please explain why Adobe PremierePro CS4 won'r work properly with Windows 7 Ultimate?? Is it because of a "bit" differences?? or for any other reason?? I have freezing problems on time line.. I am using Sony XD EX1 clips on the time line. Sometimes it works up to Dynamic LInk Encore and when it starts encoding, after few seconds it gives an error message "Encode failed" My computer config: WIN7 Ultimate/ Xeon 2.4 GHz, 12 GB RAM, Nvidia FX3800 Video card with 1GB RAM, C:\ 1TB SASHDD on RAID 5 system, D:\600 GB SAS HDD (not on RAID) Any thoughts to get it going? Thanks

Read A fix via Virtual XP
http://forums.adobe.com/thread/702693?tstart=0

My Gmail account won't work well with my Apple Mail, THe mail won't download into my gmail account and I frequently as requested to put my IMAP password in and it is then rejected.

My Gmail and Cox accounts and won't work well with my Apple Mail, The mail won't download into my gmail account and I frequently am requested to put my IMAP password in, and it is then rejected.I go to mail preferences and put the password in the appropiate place and I am told the password is new and do I want to use it. I reply yes but its not saved. Any suggestions

On the left, you should have a list of keychains and categories. If not, Select Show Keychains from the View menu.
Select the login keychain and All Items in the Category.
In the search field, type something that will help find your account keychains, like "gmail."
Select the keychain for your email account password and delete it.

My Extigy won't work properly with Wi

I have upgraded my PC to WinXP. I have a Creative Extigy with 5. speakers, and on my old PC it all?worked perfectly. With the new computer?the 5. rear?right and left speakers won't work. The others work just fine !?There seems to be no signal coming from the Extigy when I play from Musicmatch Juke box. But if I play something throught MixMeister3 it works just fine. Any ideas what the problem is ? ... thanks ... Roger

hey..actually i have same problem 2 days ago n yesterday my imessage finaly worked..
in my case i use another sim card/not original bundling,then i use my original sim card/carrier, n it instanly worked..
so actually carrier does take the problem..
im sory my english is terrible bad,im from indonesia..thank you

Frozen on "now playing" and clickwheel won't work

First I was having trouble turning off my ipod mini--when I pressed the clickwheel, it kept alternating between play and pause, but wouldn't turn off. After a long while of this, I was getting frustrated and pressed on the clickwheel with both thumbs, and the screen froze on the song screen, saying "now playing", but not actually playing or doing anything at all. The clickwheel doesn't work at all now, so I can't even turn it off. I tried out all the suggestions on the apple website, without any success. When I connect the ipod to my computer with the usb wire, the computer doesn't even acknowledge the existence of the ipod. It seems like the problem might be mechanical rather than electronic, but I don't have any idea to take this thing apart, let alone fix it.

The solution was embarrassingly simple: I whitelisted YouTube in Flashblock.
Which doesn't solve all the mysteries - why didn't YouTube work when I started Firefox in safe mode? Why did I never have to whitelist YT before? - but, mission accomplished.
I'm glad this is here for the next person to find, in case it's helpful.

USB Headset won't work along with Audi

First off, when searching for this problem, I saw many posts explaining why USB headsets won't work with a soundcard cause they basically have one built in to them. I understand this.
This is not my problem.
This is my problem:
I have a Plantronics Gamecom Pro USB headset that worked great when I was using onboard sound. It would automatically intercept the first sound signal it could pick up. So if I plugged it in first, before starting a game, the headset would pick up all sound from the game.. nothing to my external speakers.
If I started the game first with the headset unplugged, then plugged them in then started Ventrillo, then the headset would pick up the Ventrilo sound but the game sound still came from my speakers. Perfect set-up.
However, after adding an Audigy 4, the headset no longer works at all. No sound, no mic.. I plugged the headset ito my laptop and it works fine so I am pretty sure it's some sort of conflict with the Audigy 4.
I'm not too much of a techy but I'm thinking perhaps the Audigy 4 keeps a lock on the sound signal somehow, not letting the headset pick it up on the USb port?
Does anyone else have a problem using a USB headset not WITH but ALONG SIDE an Audigy?Message Edited by CroakerJoe on 0-2-2006 03:55 PM

I have the same usb headset and am having the same issue with my pc. I am running the X-fi Platinum. The plantronics are supposed to be a plug and play, but when i plug it in, the headset is getting power, is recognized by the pc and other applications, but will not play any sounds at all, and it works on my other machine with an older card. It seems to be overridden by the new card. when i was running the old audigy i could use one or the other (not both at the same time) which is to be expected with this type of headset, but i did not expect the new card to totally not allow the head set to work at all. This is causing me trouble as i use my rig for alot of gaming and LAN parties. Speakers are often not allowed, and the plantronics gamecom pro headset is a sweet set for gaming. If anyone sees this and can provide a fix. I would greatly appreciate it.
Message Edited by KoSBrokenShadow on -03-20062:0 PM

Wireless Mighty Mouse won't work properly with MacBook/tech support stumped

Hi. First post. Anyone heard of this problem? Appears to be location-sensitive. Problem described below, but first, short background...
Just bought entire Mac system after decades in corporate world with PC. Believed the TV ads that it would be simple. Already have been back to Mac store 6 times and have spent roughly 7 hours on phone with help line. Mac store even replaced Macbook entirely in case it was faulty logic board/Bluetooth circuit -- didn't help. Also, problem doesn't happen in store. So, to get to the point:
Wireless Mighty Mouse doesn't work properly when hooked up to Macbook -- herky-jerky, slow, unresponsive, sluggish, imprecise, intermittently better/worse. Went through a few Mighty Mouses and finally gave up; now using hardwire mouse and there's no problem. But before I return Mighty Mouse for refund, would like to see if there's a solution b/c I'd prefer wireless.
System is the latest little souped-up Macbook, 23" HD Cinema external monitor, external wireless Apple keyboard (which works fine), wireless Mighty Mouse (the culprit), Airport Express, HP printer. All brand new from local Mac store (Fifth Avenue, New York)... where the Genius counter folks have given up. I'm not convinced they believe me because (a) the problem doesn't occur there, and (b) after a couple of new Mighty Mouses, they finally just gave me a new Macbook to make me go away... but after going through the whole system setup once again, same problem. Have tried many different mousepads, BTW.
Tried all the stuff phone tech support suggested -- removing/installing/reinstalling software, etc. Airport works fine; using modem and printer connections there. Bluetooth works fine with keyboard. I've scouted around for intefering devices; even unplugged electrostatic loudspeakers and old tubed amps in living room (concrete wall separates rooms), unplugged hifi in same room, etc. On 40th floor of Manhattan hi-rise; concrete walls between neighbors. Have never had interference before with anything; previous PC system worked fine with Microsoft wireless (optical) mouse.
This is no longer urgent because hardwired Apple mouse works well. It's just mysterious.
Any thoughts?
Other than that, I like the Mac environment so far. Fifth Avenue store is cool, also, because it's open 24/7.
Ken
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM

Hey, thanks! That was fast. I'm impressed by the Mac community.
This program helped my hardwired mouse, actually, and did give me wider parameters on the wireless mouse, but it didn't correct the herky-jerky/sluggishness -- actually amplified those problems.
Ken

Clickwheel won't work

my ipod got a little water on it from my gym bag, but only a little. and now the clickwheel won't allow for me to scroll. i can't control the volume or select what artist i want on a list or anything that the wheel lets you do.
HELP!!!!!!

You fried it, most likely.
Try powering it off, dry it thoroughly and let it sit for 5 or more days.
Try it then-if it does not work you will most likely have to replace it.

Can't sign in to my bank since upgrading to Firefox 4, no error message, sign in button won't work, fine with IE?

Upgraded to Firefox 4 yesterday. Have since had a problem logging into my bank. I enter all log in details, click the sign in button and nothing happens, the page just remains static, there are no error messages. No problem logging in with Internet Explorer or on a separate computer with Firefox 3 so it must be Firefox 4 that's causing the problem. It's just this one site, all other sites I use requiring log in work fine. It can't be a problem with the site because as I said it works fine with IE and Firefox 3?? Help!

Have now ditched Firefox 4 and reinstalled the previous version-the problem has disappeared, doesn't say much for the new version!

Photobucket won't work properly with Safari 6.1.6 update.

What the heck is going on now? Updated Safari as part of regular, monthly process. Now the editor and other features of Photobucket won't work.

Gustavo,
Since you used Software Update for 10.6.3, try downloading and installing the Mac OS X v10.6.3 Update (Combo).
;~)

160GB iPod Classic Won't Work Properly with speaker systems

My 120GB works fine with my iHome, and a new speaker system I just purchased... because I thought my iHome was broken, because when I used my 160GB in it, it didn't respond to "play/pause" commands with either the remote or the speaker command. When I tried the 160GB on the new system I bought, it didn't respond either. Should the 160GB work fine with those systems if they play the 120GB without a problem? I'm a bit confused on the issue.

More info would be helpful
What do you see on the iPod screen when you connect to the PC?
Which version of iTunes are you using?
What is the iPod software version as shown in iTunes summary page, the last time you connect successfully.? Or just, on the iPod, press Settings->About
press the select button 3 times and you will get the software version.
HAVE A NICE DAY!

Ipod Touch 5G- WiFi is very slow or won't work, even with 3 bars and stood next to the hub. Is there a problem with iOS 6.0.1? Any one know a way to fix it?

Even with 3 signal bars on a 11mb/s connection. It takes more then 3 mintues to load Google fully!
It works fine loading one page then goes back to being slow or no excitant. It seems to start working again after using speed test.
At first i thought it was the case but after removing it there was no difference
I have tried every thing i could think like:
1. Turing it off and on again
2. A complete restore and backup. (Done this about 3 times)
I'm not sure if the new iOS 6.0.1 up date has caused this as it seemed to work fine for about a week after.
Any help would be appreciated!

I have same problem:
I saw another topic on this but it was a couple of months old. Last month I purchased a ipod touch 5g. It runs great except the speedtest tops out at about .3 mbps down and 5 mbps up. I don't understand what is going on. All my other wifi: Macs, ipod touch 4, ipad 2 & 3, etc work fine and get great speed of 9-15 mbps down and 5 mbps up. I can barely watch an Amazon video. Sometimes it goes fast but that is few and far between. I have tried resetting the network on it. I adusted my router for all the recomendations by Apple.
It was suggested to remove the security on the router just to test it. I did that but it made no difference. This happens whether I'm close (10' or less) or farther away. Is there something I'm missing or do I need to return it?
I keep seeing something about iOS 6.0.2 but my iPod Touch says I'm up to date at 6.0.1
thanks,
Bryce

Proxy client won't work in this case?

I have not made my client side work for a single device yet but I want to make sure I'm spending time on the right track:
My code will be running on the application server side, there will be hundreds of devices each has its own IP address, but runs exactly the same web services, and my code will need to talk to each of the selected ones using its IP address. I see that some generated proxy class contain the particular IP of the device where the web service is running on? If so, then it won't be possible for me to use a client proxy class to talk to all the devices.
I'm currently trying something like this:
URL url = new URL("http://172.21.159.52:80/cmi?wsdl");
QName serviceName = new QName("urn:Genus", "genusService");
Service service = Service.create(url, serviceName);
//These are for testing purpose
System.out.println ("List of QNames of service endpoints:");
Iterator it = service.getPorts();
*while (it.hasNext ()) {*
System.out.println (" " + it.next());
I can see the single service named 'genusPortType' in the output, however when the following code is reached:
QName portName = new QName("urn:Genus", "genusPortType");
Dispatch<SOAPMessage> dispatch = service.createDispatch(portName, SOAPMessage.class,Service.Mode.MESSAGE);
I got an error 'javax.xml.ws.WebServiceException: Illegal argument combination [type=javax.xml.soap.SOAPMessage,mode=MESSAGE]'. I'm confused because I see the same usage in lots of sample codes. Is it because the 'portName' part decides that these two parameters are not fit based upon the definition of 'genusPortType'? If the operation is defined like this in the wsdl file, wht values should I use?
*<wsdl:binding name="genusBinding" type="cmi:genusPortType">*
*     <wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />*
*     *
*     <wsdl:operation name="login" >*
*          <wsdlsoap:operation soapAction="com.controlmod.terminal.services.web.services.Login#Login" />*
*          <wsdl:input name="loginRequest" >*
*          <wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" />*
*          </wsdl:input>*
*          <wsdl:output name="loginResponse" >*
*          <wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" />*
*          </wsdl:output>*
*     </wsdl:operation>*
*.............*

Sorry for really slow response on this - are you still here/still
having the issue?
Fillattr runs two migrations - one for access rules, and another for
proxy settings. I've seen cases where one works and the other fails.
But eventually you can get it going if you find the hangup.
Craig Johnson
Novell Knowledge Partner
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Help! iPod won't work - started with iPod updater

Hi,
I tried updating my iPod nano today as suggested. It installed and everything fine. But when I tried updating it, it gave me an error and I couldn't use my iPod. So I tried restoring it with the updater.
Nothing worked. The "Do not disconnect" sign is up all this while. So I try restarting my computer. The DNDisconnect sign is still on but now.. nothing works. I can't do anything with it and iTunes does not even recognize it. I don't even have the iPod sign on My Computer. So I disconnect it, against my better judgement. And it gives me the exclamation sign and tells me to go to the Apple Support site.
I do.. and I follow the 5 Rs. I start by resetting it. This brings me into the Disk Mode which is where I'm stuck at now. It won't exit even when I try restarting it. I've reinstalled the updater AND iTunes and nothing seems to work still. Everytime I connect it to try to restore it with the updater, it says Service error.
Help.......?

If you get a message with iPod Service Error please see if either of these two links are helpful:
iPod for Windows: Fast user switching in Windows XP is not supported
iPod appears in Windows Explorer but does not appear in iTunes
Regards
Colin R.

Clickwheel won't work proberly with case

Similar Messages

Maybe you are looking for