Client initialization RegTask Error
Hello,
new year, new problems :-)
After a client of mine upgraded his VMware environment and moved the ConfigMgr Servers, he's been having trouble with his ConfigMgr environment. The main problem being an utterly slow OSD. He has a ConfigMGr 2012 R2 CU3 environment with all needed Patches
and Updates installed.
So what's the problem? During a Tasksequence, after the client installation step (on a Win7 SP1 Enterprise x86 system), the client needs about 30 Minutes to initialize. I was able to track down the error in ClientIDManagerStartup.log - the client cannot
register itself with the MP: "RegTask: Failed to send registration request message. Error: 0x8000000a"
After n retries, the client can suddenly register and the tasksequence continues, until the next reboot causes the next client initialization.
I initially checked the Primary Site Server and found out that the customer had activated HTTPS only without adding any kindof PKI certificate. I switched everything back to HTTP but that did not solve the problem.
I've checked google and I've found a couple of blogs describing the same or similar problems:
Blog #1
Blog #2
When querying the Primary Site for MP information, as stated on Blog #2, the Primary Site responds with both MPs in the customers environment as follows:
- <MPList>
- <MP Name=”server.corp.domain.com” FQDN=”server.corp.domain.com“>
<Version>7958</Version>
- <Capabilities SchemaVersion=”1.0“>
<Property Name=”SSLState” Version=”0″ />
</Capabilities>
</MP>
</MPList>
I have also added the parameters SMSMP=server.corp.domain.com and SMSDIRECTORYLOOKUP=NOWINS, but that hasn't changed anything either.
At this point, the only other advice I've found, is to uninstall the MP and reinstall it. I'm reluctant to do this, as we're working in a productive environment and I'd rather try something more subtle, than breaking out the sledge hammer...
I've no idea whtat else to try at the moment. Does anyone here have any ideas?
Thanks,
Fred
Short Update on this one:
I've installed a completely new ConfigMgr 2012 R2 CU3 Environment on a brand new Server 2012 R2 in the customer's environment. The SQL Server is a stand alone server also running on Server 2012 R2, with SQL Server 2012 SP1. Communication between both Site
Servers is fine, I can run a build & capture TS on a VM (vSphere 5.5) without any problems.
Only common component between the "old" and "new" ConfigMgr is Active Directory. I double checked that it's been correctly extended and also checked the System Management Container entries - no problems. Checking the MP response via "http://<MP
name>/sms_mp/.sms_aut?mplist" & "http://<MP name>/sms_mp/.sms_aut?mpcert" shows a correct response, as stated above.
However, as soon as I try to install a Notebook (in this case an HP EliteBook 840 G1) with Windows 7 (fully patched image), I still get the above "error"... right now I'm not really sure what to check... I'll be completing the following tests tomorrow:
- Install different Notebook Model
- Change Server NIC to E1000 (from VMXNET3)
I'll keep this thread updated, but am also thankful for any input on this matter.
Cheers,
Fred
Similar Messages
-
Can't initialize OCI error occured during the login process using TOAD 9.0
I have installed the Toad 9.0 recently while login using the username & password for oracle 10.0 database , i am getting the error
Can't initialize OCI Error 1
But i am able to login using the Sql Plus successfully..
Thanks in Advance.Here's one more reason why this error occurs in Toad. It is when you have more than one Oracle Client installed on your machine. Even when you select the correct Oracle Home in "Connect Using" field of Toad, you still get this error "Can't initialize OCI. Error -1". So, to solve that you need to go to the installation folder of that Oracle Home (e.g. C:\Oracle\ora92\), then go to the BIN folder. Open Oracle.Key in Notepad and confirm that it is showing Registry entry/path to the correct Oracle Home (e.g. HOME0 or HOME1 or whatever).
I hope this helps. -
Can't initialize oci. error 1
Dear all:
When I login TOAD, I got this error:
can't initialize oci. error 1
but sql*plus login can successfully from my client.
I've tried to set the NLS_LANG manually in the registry and set the enviroment ORCLE_HOME , but it cannot work.
my OS client is WINXP SP3 and the DB is : ORACLE 9.2.0.8 64bit
Regards
TerryDUPLICATE thread
Cannot login via TOAD with ORA-12705 error -
C2R Client returned failing error
Hi,
We are attempting to deploy OneDrive for Business desktop sync app to our organisation via SCCM, in-house packaged.
Has been a high success rate, however there are few users of which the sync app fails to install and the log files return errors associated with officeclicktorun.exe see below:
Found C2R Client at: C:\Program Files\Microsoft Office 15\ClientX64\OfficeClickToRun.exe
Launching OfficeClickToRun.exe with parameters: scenario=unknown acceptalleulas="True" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675" productreleaseid="none" displaylevel="False"
culture="en-us" baseurl="C:\Windows\ccmcache\q2" lcid="1033" platform="x86" updatesenabled="True" version="15.0.4631.1002"
C2R Client returned failing error code 255
As a result it also tries to install MS Office Pro Plus 2013 and screwing up the 2010 office install as a result. Can anyone advise?Hi Ethan,
Logs below:
Timestamp Process
TID Area
Category EventID
Level Message
Correlation
11/03/2014 15:55:32.993 SETUP (0xe98)
0x770 Click-To-Run Telemetry
aqkhc Medium
{"MachineID":"8f1d5290733958449d190d11854b71ae","SessionID":"39715c65-f33f-4c15-aeee-129e51534a14","GeoID":"244","Ver":"15.0.4623.1001","ExeVer":"15.0.4623.1001","SecuritySessionId":"0","ModulePath":"C:\Windows\ccmcache\q2\setup.exe","CommandLine":"/configure
"C:\Windows\ccmcache\q2\configuration.xml"","Bitness":"32","IntegrityLevel":"0x4000"}
11/03/2014 15:55:32.994 SETUP (0xe98)
0x770 Click-To-Run Telemetry
aqkhe Medium
{"MachineID":"8f1d5290733958449d190d11854b71ae","SessionID":"39715c65-f33f-4c15-aeee-129e51534a14","GeoID":"244","Ver":"15.0.4623.1001","OSVersion":"6.1","SP":"1","ProductType":"1","ProcessorArch":"9","Locale":"1033"}
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
amawz Medium
Args::ParseArgument: Parsing commandline.
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
ambpm Medium
Args::Load: Have Admin scenario
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
amaw0 Medium
Args::GetNextArgument: Next argument: /configure
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
amaw0 Medium
Args::GetNextArgument: Next argument: C:\Windows\ccmcache\q2\configuration.xml
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
aoh7y Medium
Args::GetConfigFile: config file: C:\Windows\ccmcache\q2\configuration.xml
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
appfq Medium
Args::Load: product release id: none culture: en-us
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
apvr9 Medium
TrySetUserRegistry::TrySetAttemptGetKey: Setting Attempt Get Key for none
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
amaw8 Medium
TrySetUserRegistry::TrySetLicenseTokenOrKey: No key or token found for none
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
aoh76 Medium
HandleCommandLineAction::HandleStateAction: Not OOD scenario nor showing ODT help, check for elevation.
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
aoh8l Medium
TryGetElevation::HandleStateAction: Already running from elevated context.
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run Telemetry
aoh78 Medium
HandleCommandLineAction::HandleStateAction: Starting Admin tool scenario.
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run Telemetry
aoh8d Medium
HandleCommandLineAction::HandleStateAction: Start installation with configuration file: C:\Windows\ccmcache\q2\configuration.xml
11/03/2014 15:55:32.995 SETUP (0xe98)
0x770 Click-To-Run
anwvz Medium
Configuration::Load: Using config file: C:\Windows\ccmcache\q2\configuration.xml
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
anwvy Medium
ConfigFile::ParseAttribute: Value of SourcePath:
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
anwvu Medium
ConfigFile::ParseAddNode: Version not specified.
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
anwvv Medium
ConfigFile::ParseAddNode: ForceDowngrade:
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
anwvy Medium
ConfigFile::ParseAttribute: Value of OfficeClientEdition: 32
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
anwvy Medium
ConfigFile::ParseAttribute: Value of Level: None
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
anwvy Medium
ConfigFile::ParseAttribute: Value of AcceptEULA: TRUE
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
amaws Medium
Configuration::Load: Setting culture to: en-us
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
aodb1 Medium
Configuration::AdjustBaseUrlForLocalSource: Found the version cab at: C:\Windows\ccmcache\q2\Office\Data\v32.cab
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
apm49 Medium
Configuration::AdjustBaseUrlForLocalSource: Removing \Office\Data
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
amcrz Medium
Configuration::GetProductSource: Adjusted base url: C:\Windows\ccmcache\q2
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
amaxp Medium
BaseConfigure::TryGetConfiguration: EULA's have been accepted.
11/03/2014 15:55:33.261 SETUP (0xe98)
0x770 Click-To-Run
aoh85 Medium
AdminConfigure::HandleStateAction: Configuring an install/crosssell scenario.
11/03/2014 15:55:33.288 SETUP (0xe98)
0x770 Click-To-Run
aqdco Monitorable
TryCheckNetworkCost::HandleStateAction: Failed to initialize NetworkCostManager for C:\Windows\ccmcache\q2. Assuming low cost and proceeding.
11/03/2014 15:55:33.288 SETUP (0xe98)
0x770 Click-To-Run
aoh9i Medium
TryGetVersionDescriptor::HandleStateAction: Getting Cab: v32.cab
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
anwv6 Medium
Descriptor::Load: Reading Available value from descriptor: 15.0.4631.1002
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
amawt Medium
Descriptor::Load: Prereq Node exists. Being parsing it.
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
anwv7 Medium
Descriptor::Load: Reading Bootstrapper value from descriptor: 15.0
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
amax8 Medium
TryGetVersionDescriptor::HandleStateAction: Descriptor contains Prereqs. Run them now.
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
anwwb Medium
IsNativeValidator::CheckPreReq: returning: 1.
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
an8w1 Medium
O15BetaValidator::CheckPreReq: Validator has version descriptor
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
an8w2 Medium
O15BetaValidator::CheckPreReq: Currently installed version: 15.0.4454.1513
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
an8w4 Medium
O15BetaValidator::CheckPreReq: Current build is newer than Beta build. Prereq check passes.
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
an8xa Medium
O15BetaValidator::CheckPreReq: returning: 1.
11/03/2014 15:55:33.670 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:33.671 SETUP (0xe98)
0x770 Click-To-Run
anwwj Medium
SXSValidator::CheckPreReq: Has preexisting 32bit Firefly.
11/03/2014 15:55:33.682 SETUP (0xe98)
0x770 Click-To-Run
anwwn Medium
SXSValidator::CheckPreReq: Cross bitness test passed.
11/03/2014 15:55:33.682 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:33.682 SETUP (0xe98)
0x770 Click-To-Run
anwwp Medium
BootstrapperValidator::CheckPreReq: returning: 1.
11/03/2014 15:55:33.682 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:33.697 SETUP (0xe98)
0x770 Click-To-Run
ambty Medium
ClientValidator::CheckPreReq: No C2R service is running. Checking Firefly Client version.
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
ambtz Medium
ClientValidator::CheckPreReq: Client located here C:\Program Files\Microsoft Office 15\ClientX64\IntegratedOffice.exe is version 15.0.4454.1513
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
ap2j2 Medium
ClientValidator::CheckPreReq: Current client version is located here C:\Program Files\Microsoft Office 15\ClientX64\OfficeClickToRun.exe
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
ambt0 Medium
ClientValidator::CheckPreReq: Current client version is version 15.0.4454.1513 available is 15.0.4631.1002
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
ap2j3 Medium
ClientValidator::CheckPreReq: Comparison result: -177
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
ap2j4 Medium
ClientValidator::CheckPreReq: Version of client too low to install with: Have: 15.0.4454.1513 Need: 15.0.4631.1002
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
an8w0 Medium
ClientValidator::CheckPreReq: returning: 0.
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
anhmp Medium
Prereq::ShowPrereqFailure: A Prereq check has failed. Client update needed. We are sorry, but we could not complete the installation. Please try again later. http://officeredir.microsoft.com/r/rlidC2RErrorToAsset?scenario=ClickToRun&errorCode=9&ErrorSource=BOOTSTRAPPER_PREREQ&exceptionType=clientVersion&lang=en-us&crc32=0
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
aoh88 Medium
RunPrereqs::HandleStateAction Prereq check has failed.
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
aoh9d Medium
HandlePrereqFailure::HandleStateAction: Need to update the client.
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
ap2j6 Medium
TryConfigureClient::HandleStateAction: No config file. Using default values for parameters.
11/03/2014 15:55:33.734 SETUP (0xe98)
0x770 Click-To-Run
amayh Medium
TryConfigureClient::HandleStateAction: Unable to find OfficeClickToRun.exe . Found Firefly client C:\Program Files\Microsoft Office 15\ClientX64\IntegratedOffice.exe
11/03/2014 15:55:33.735 SETUP (0xe98)
0x770 Click-To-Run
amayl Medium
TryLaunchFireflyUpgrade::HandleStateAction: Getting updated client.
11/03/2014 15:55:35.965 SETUP (0xe98)
0x770 Click-To-Run
amaym Medium
TryLaunchFireflyUpgrade::HandleStateAction: Copying new client from: C:\Windows\TEMP\OfficeC2R04F609EC to: C:\Program Files\Microsoft Office 15\ClientX64
11/03/2014 15:55:36.125 SETUP (0xe98)
0x770 Click-To-Run
amayo Medium
TryLaunchFireflyUpgrade::HandleStateAction: Launching OfficeClickToRun.exe with parameters: scenario=clientupgrade baseurl="http://officecdn.microsoft.com/PR/39168D7E-077B-48E7-872C-B232C3E72675" culture=en-us platform=x86 version=15.0.4631.1002
productstoadd=ProPlusRetail migratingproducts="" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675" installid= displaylevel=False
11/03/2014 15:55:42.142 SETUP (0xe98)
0x770 Click-To-Run
amayq Medium
TryLaunchFireflyUpgrade::HandleStateAction: Client successfully updated.
11/03/2014 15:55:42.142 SETUP (0xe98)
0x770 Click-To-Run
ambwd Medium
Prereq::PrereqsFailed: Client update already done. Skipping validator for it.
11/03/2014 15:55:42.143 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:42.143 SETUP (0xe98)
0x770 Click-To-Run
anwwb Medium
IsNativeValidator::CheckPreReq: returning: 1.
11/03/2014 15:55:42.143 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:42.143 SETUP (0xe98)
0x770 Click-To-Run
an8w1 Medium
O15BetaValidator::CheckPreReq: Validator has version descriptor
11/03/2014 15:55:42.143 SETUP (0xe98)
0x770 Click-To-Run
an8w2 Medium
O15BetaValidator::CheckPreReq: Currently installed version: 15.0.4631.1001
11/03/2014 15:55:42.143 SETUP (0xe98)
0x770 Click-To-Run
an8w4 Medium
O15BetaValidator::CheckPreReq: Current build is newer than Beta build. Prereq check passes.
11/03/2014 15:55:42.143 SETUP (0xe98)
0x770 Click-To-Run
an8xa Medium
O15BetaValidator::CheckPreReq: returning: 1.
11/03/2014 15:55:42.143 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:42.143 SETUP (0xe98)
0x770 Click-To-Run
anwwg Medium
SXSValidator::CheckPreReq: Has preexisting 32bit C2R Client.
11/03/2014 15:55:42.147 SETUP (0xe98)
0x770 Click-To-Run
anwwn Medium
SXSValidator::CheckPreReq: Cross bitness test passed.
11/03/2014 15:55:42.147 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:42.147 SETUP (0xe98)
0x770 Click-To-Run
anwwp Medium
BootstrapperValidator::CheckPreReq: returning: 1.
11/03/2014 15:55:42.147 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:42.147 SETUP (0xe98)
0x770 Click-To-Run
anwwe Medium
DiskSpaceValidator::CheckPreReq: Free disk space is sufficient.
11/03/2014 15:55:42.147 SETUP (0xe98)
0x770 Click-To-Run
anhmm Medium
Prereq::PrereqsFailed: No prereqs have failed.
11/03/2014 15:55:42.147 SETUP (0xe98)
0x770 Click-To-Run
aoh9n Medium
TryGetClient::HandleStateAction: Installation path is: C:\Program Files\Microsoft Office 15
11/03/2014 15:55:42.147 SETUP (0xe98)
0x770 Click-To-Run
amaya Medium
TryGetClient::HandleStateAction: Looking for existing client.
11/03/2014 15:55:42.147 SETUP (0xe98)
0x770 Click-To-Run
amayb Medium
TryGetClient::HandleStateAction: Found C2R Client at: C:\Program Files\Microsoft Office 15\ClientX64\OfficeClickToRun.exe
11/03/2014 15:55:42.147 SETUP (0xe98)
0x770 Click-To-Run
aoh9t Medium
TryLaunchClient::HandleStateAction: Launching OfficeClickToRun.exe with parameters: scenario=unknown acceptalleulas="True" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675" productreleaseid="none"
displaylevel="False" culture="en-us" baseurl="C:\Windows\ccmcache\q2" lcid="1033" platform="x86" updatesenabled="True" version="15.0.4631.1002" productstoadd="GrooveRetail_en-us_x-none"
11/03/2014 15:56:06.965 SETUP (0xe98)
0x770 Click-To-Run
apx75 Monitorable
TryLaunchClient::HandleStateAction: C2R Client returned failing error code 255
11/03/2014 15:56:06.965 SETUP (0xe98)
0x770 Click-To-Run
aoh72 Medium
ExitBootStateMachine::HandleStateAction: Bootstrapper workflow exiting with result: 0x0
11/03/2014 15:56:06.965 SETUP (0xe98)
0x770 Click-To-Run
aoh9z Medium
AdminBootstrapper::Main: Installation came back with 255.
11/03/2014 15:56:06.965 SETUP (0xe98)
0x770 Logging Liblet
aqc99 Medium
Logging liblet uninitializing.
We are also unable to repair/uninstall as a result.
Thank you -
Hi again,
I'm on my enterprise management console and Database Instance and Listener shows the green arrow, but the Agent Connection to Instance shows a red downward arrow and the error:
Status: Failed
Details: ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)
My OraClrAgnt service is up and running (using winxp pro, oracle 11gR2), I'm on my home pc, all my ports are open (my machine's name is "abigail" and it is dmzhost)
Any suggestions to resolve this error?
My Tnsnames ora:
ABIGAIL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl.0.0.10)
LISTENER_ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
(CONNECT_DATA =
(SID = ORCL)
RMAN =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rman.abigail)
My listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\app\abigail\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:E:\app\abigail\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
ADR_BASE_LISTENER = E:\app\abigail
My SQLNET.ORA
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES, LOCALHOST)
NAMES.TRACE_LEVEL = ADMIN
My alert file
<msg time='2013-10-10T20:47:02.687-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ABIGAIL'
host_addr='::1'>
<txt>10-OCT-2013 20:47:01 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=SYSTEM))(SERVICE_NAME=orcl.0.0.10)) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=38289)) * establish * orcl.0.0.10 * 12518
</txt>
</msg>
<msg time='2013-10-10T20:47:02.687-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ABIGAIL'
host_addr='::1'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
</txt>
</msg>
My listener status and services
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 10-OCT-2013 22:47:58
Uptime 0 days 0 hr. 2 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File E:\app\abigail\product\11.2.0\dbhome_1\network\admin\l
istener.ora
Listener Log File e:\app\abigail\diag\tnslsnr\ABIGAIL\listener\ale
rt\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.0.0.10" has 1 instance(s).
Instance "orcl", status READY, has 8 handler(s) for this service...
The command completed successfully
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl.0.0.10" has 1 instance(s).
Instance "orcl", status READY, has 8 handler(s) for this service...
Handler(s):
"D006" established:0 refused:0 current:0 max:800 state:ready
DISPATCHER <machine: ABIGAIL, pid: 1312>
(ADDRESS=(PROTOCOL=tcps)(HOST=ABIGAIL)(PORT=1060))
"D005" established:0 refused:12 current:0 max:800 state:ready
DISPATCHER <machine: ABIGAIL, pid: 1288>
(ADDRESS=(PROTOCOL=tcps)(HOST=ABIGAIL)(PORT=1061))
"D004" established:0 refused:1 current:1 max:16383 state:ready
DISPATCHER <machine: ABIGAIL, pid: 1260>
(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1063))
"D003" established:0 refused:1 current:1 max:16383 state:ready
DISPATCHER <machine: ABIGAIL, pid: 1140>
(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1062))
"D002" established:0 refused:1 current:1 max:16383 state:ready
DISPATCHER <machine: ABIGAIL, pid: 140>
(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1059))
"D001" established:0 refused:1 current:1 max:16383 state:ready
DISPATCHER <machine: ABIGAIL, pid: 1072>
(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1057))
"D000" established:0 refused:1 current:1 max:16383 state:ready
DISPATCHER <machine: ABIGAIL, pid: 748>
(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1058))
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfullyI added this on my listener.ora
DIRECT_HANDOFF_TTC_LISTENER=OFF
Works now!
Moral of the story, google is ur friend lol. Thanks for the reply tho! -
MC DAQ initialize.vi error
Hello,
I am trying to use MC DAQ Initialize.vi for reading some CCP and I have the bellow error
-301034
MC DAQ Initialize.vi
Error -301034 occurred at MC DAQ Initialize.vi
Possible reason(s):
ECU Measurement and Calibration Toolkit: (Hex 0xFFFB6816) The definition of the measurement could not be found in the A2L file. Most likely, the name of the measurement is misspelled or otherwise invalid, or the A2L database file has been corrupted. Solution: Make sure that the name of the measurement is spelled correctly and that the A2L database file is valid.
The a2l database is ok cause i'm using with other Vi's. Also the names of signals are copied exactly from a2l file so there is no typo error.
Does anybody encountered this issue or can somebady help with an idea?
Thanks,
VincentHello Vincent,
You should be able to open the A2L file with notepad. I would suggest opening it and searching for your measurement. If you can find it, then the name must not be a typo. There may be something inside the measurement that our parser is having trouble with. If you could copy the section for your measurement here, we may be able to see what is going on. (You can use dummy values for addresses, etc when you paste the part here.)
You can also try running the M_C Explorer example that ships with the toolkit (Help-Find Examples. Hardware Input and Output -> CAN -> NI-CAN -> ECU Measurement and Calibration -> Advanced). This example opens all the measurements and characteristics in the A2L file, so you can see which values you have access to and if they are configured properly.
I hope that helps. Have a great day.
O. Proulx
National Instruments
www.ni.com/support -
Exception caught while loading clients.xml: [object Error] in IE
I’m following lesson 9 from Adobe Dreamweaver CS3
Classroom in a Book which starts with viewing in a browser the
final web page provided on the CD that comes with the book.
The problem is that when I browse that file, IE 7 gives this
error:
quote:
Exception caught while loading clients.xml: [object Error]
Other browsers and versions of IE display the
page fine.
From Dreamweaver I ran Browser Compatibility check and it
reported this:
quote:
Found 1 errors in external css files
Affects: Firefox 1.5; Internet Explorer 6.0, 7.0; Netscape
8.0; Opera 8.0, 9.0
Found 2 errors in external css files
Affects: Internet Explorer for Macintosh 5.2
Found 3 errors in external css files
Affects: Safari 2.0
All errors point to this code from the same
line:
href="css/main.css
and the whole line is:
<link href="css/main.css" rel="stylesheet" type="text/css"
media="screen" />
I also ran validation of the file and it reported this:
quote:
2 The tag: "html" doesn't have an attribute: "xmlns:spry" in
currently active versions.[XHTML 1.0 transitional]
114 The tag: "div" doesn't have an attribute: "spry:region"
in currently active versions.[XHTML 1.0 transitional]
117 The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
118 The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:setrow" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:select" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:repeat" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:odd" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:hover" in
currently active versions.[XHTML 1.0 transitional]
128 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
129 The tag: "div" doesn't have an attribute: "tabindex" in
currently active versions.[XHTML 1.0 transitional]
134 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
143 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
The problem is that I don’t know what to do next and if
and how this file can be fixed.
Will appreciate greatly your help
Thank youAnother bump
hoping the experts here might help if they check the files, I
uploaded the project on a public site. You can download it from
here:
http://savefile.com/files/1452147
at he bottom of the page click Download and on the next page
at the bottom click Download file now
These are the troubleshooting steps and solutions I
attempted.
After I ran check Browser Compatibility it showed problems
located in main.css file
I opened main.css and ran Browser Compatibility there too.
The problems were listed as the following:
Error Unsupported property: content
Internet Explorer 6.0, 7.0; Internet Explorer for Macintosh
5.2
line 75 .clearfix:after { content: "."; display: block;
height: 0; clear: both; visibility: hidden; }
Error Unsupported property: zoom
Firefox 1.5; Internet Explorer for Macintosh 5.2; Netscape
8.0; Opera 8.0, 9.0; Safari 2.0
line 82 .clearfix { zoom: 1; }
Error Unsupported value: 'hand'
Safari 2.0
line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
cursor: pointer; cursor: hand; }
also lines 157
Warning Unsupported value: 'hand'
Firefox 1.5; Internet Explorer 6.0, 7.0; Internet Explorer
for Macintosh 5.2; Netscape 8.0
line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
cursor: pointer; cursor: hand; }
also lines 157
I deleted unsupported properties and changed the unsupported
value of hand to default and saved the main.css.
Unfortunately IE still couldn't render the page showing the
same error.
I searched the CSS Advisor web site and even entire Google
but except a few people reporting the same error no solution was
posted.
I also tied to contact the publisher of the book but I didn't
get any replies with solutions yet.
Since this is a learning project I'm trying to prepare myself
for real live scenarios and wonder what experienced users would do
when facing a similar problem if the project was for a client. What
would you do. What is an acceptable practice? If you can't find a
solution what would you say to your clients "well IE 7 can't render
certain things from your page and there is nothing I can do about
it"?
I'll appreciate any input -
SCCM 2012 Client - Manual Installation Error
Hi,
I am trying to install SCCM client manually on few of the machines that have Windows 7 OS. The installation is failing with the below error:
Failed to get client version for sending messages to FSP. Error 0x8004100e
BITS job creation failed with 80200014. Unable to check BITS version
This Operating System does not contain the correct version of BITS. BITS 2.5 or later is required.
Failed to get client version for sending messages to FSP. Error 0x8004100e
But Windows 7 comes with BITS 4.0 version. Below is the command I ran to install the client:
CCMSetup.exe /mp:<MP name> /logon SMSSITECODE=<code> FSP=<FSP name>
I even tried running with BITS priority switch:
CCMSetup.exe /mp:<MP name> /logon /BITSPriority:LOW SMSSITECODE=<code> FSP=<FSP name>
Thank you!
NMTry installing ccmsetup manually with the parameter /BITSpriority:low:
ccmsetup.exe /BITSpriority:low
http://teacheritblog.wordpress.com/2013/08/07/configmgr-client-install-bits-error-on-windows-7-sccm/
http://social.technet.microsoft.com/Forums/en-US/2db264c9-1769-4f6b-bb77-5dcf1106fd18/sccm-2012-agent-installation-using-orchestrator
Regards, Ibrahim Hamdy -
(C1) Initialize POST Error Manager (PEM)
Hello,
My hardware diagnostic card gives the following error: (C1) Initialize POST Error Manager (PEM). My bios just starts well and gives no error messages.
I can go to the bios as usually and my computer works normally (at the moment), but QuickTech also gives some error messages:
- BIOS Buffer overrun check
- SMBus Host detection
Maybe that these errors also have to do with it?
When I try to search with Google I only get some manuals where these error codes are listed, but no more explanations and possible solutions.
Can somebody please tell me what this problem is all about and how to fix it?
I have a MSI 6533 bord.Hi,
No, unfortunately not. I posted this question in a lot of different forums, but no one seems to know what's exactly wrong and how to fix it.
I keep searching, and when I find some answers / solutions, I'll post it here. Can you also please keep me informed if you know some more? -
The server deploy EJB but I run EJB Client program,The error msg is can't find JNDI
Hi all:
I am using Weblogic 6.1/SP2. I use the console to start
server and deploy EJB jar,from the msg I see my EJB jar
been deployed. When I run EJB Client program, the error
msg is can't find JNDI name t3://URL:11003.....
I check my ejb-jar.xml amd weblogic-ejb-jar.xml are fine.
Last week I did deploy EJB and ran the client both
suceessful. Any ideas, Thank you.Sabha:
Thank you for your help info, I soloved the problem.
The problem is the ejb jar was deleted(I don't why)
then System Admin to deploy EJB jar from Admin console.
After that everything is fine.
"Sabha" <[email protected]> wrote:
Run weblogic.Admin -url ... LIST to see whether the JNDI name is there
. or
you can view the jndi tree of the server from the console (right click
on
server name) and check whether the ejb home is bound to the correct jndi
name.
-Sabha
"Matthew Shinn" <[email protected]> wrote in message
news:[email protected]..
Hi Albert,
I would double check to make sure the EJB was indeed deployed (check
server log). What message did you see that leads you to believe itwas
successfully deployed? Also, verify the JNDI name you are lookingup in
your client matches the JNDI name for the EJB. If this doesn't solve
the problem, please post the error message and stack trace you are
seeing on the client.
- Matt
Albert Pi wrote:
Hi all:
I am using Weblogic 6.1/SP2. I use the console to start
server and deploy EJB jar,from the msg I see my EJB jar
been deployed. When I run EJB Client program, the error
msg is can't find JNDI name t3://URL:11003.....
I check my ejb-jar.xml amd weblogic-ejb-jar.xml are fine.
Last week I did deploy EJB and ran the client both
suceessful. Any ideas, Thank you. -
Client not updating - Error Code # 0x80244023 and 0x801901f8
Hello All,
We have a Windows server (2008) which is not pulling updates from WSUS server. It has two NICs - one is public and another is configured with
172.x.x.x range for Admin use (this is for WSUS communication with no DNS setup).
See logs below,
2014-05-07 13:05:50:089 916 1410 Misc
=========== Logging initialized (build: 7.6.7600.256, tz: +0800) ===========
2014-05-07 13:05:50:089 916 1410 Misc
= Process: C:\Windows\system32\svchost.exe
2014-05-07 13:05:50:089 916 1410 Misc
= Module: c:\windows\system32\wuaueng.dll
2014-05-07 13:05:50:089 916 1410 Service *************
2014-05-07 13:05:50:089 916 1410 Service ** START
** Service: Service startup
2014-05-07 13:05:50:089 916 1410 Service *********
2014-05-07 13:05:50:091 916 1410 Agent
* WU client version 7.6.7600.256
2014-05-07 13:05:50:092 916 1410 Agent
* Base directory: C:\Windows\SoftwareDistribution
2014-05-07 13:05:50:092 916 1410 Agent
* Access type: Named proxy
2014-05-07 13:05:50:092 916 1410 Agent
* Default proxy: proxy:8083
2014-05-07 13:05:50:093 916 1410 Agent
* Network state: Connected
2014-05-07 13:05:50:520 916 1410 DtaStor Default service
for AU is {00000000-0000-0000-0000-000000000000}
2014-05-07 13:05:50:531 916 1410 DtaStor Default service
for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-07 13:05:50:539 916 1410 Agent
WARNING: Failed to read the service id for re-registration 0x80070002
2014-05-07 13:05:50:539 916 1410 Agent
WARNING: Missing service entry in the backup data store; cleaning up
2014-05-07 13:06:01:251 916 1594 Report
CWERReporter::Init succeeded
2014-05-07 13:06:01:251 916 1594 Agent
*********** Agent: Initializing Windows Update Agent ***********
2014-05-07 13:06:01:253 916 1594 Agent
*********** Agent: Initializing global settings cache ***********
2014-05-07 13:06:01:253 916 1594 Agent
* WSUS server: http://172.16.74.28
2014-05-07 13:06:01:253 916 1594 Agent
* WSUS status server: http://172.16.74.28
2014-05-07 13:06:01:253 916 1594 Agent
* Target group: (Unassigned Computers)
2014-05-07 13:06:01:253 916 1594 Agent
* Windows Update access disabled: No
2014-05-07 13:06:01:253 916 1410 Report
*********** Report: Initializing static reporting data ***********
2014-05-07 13:06:01:253 916 1410 Report
* OS Version = 6.1.7601.1.0.196626
2014-05-07 13:06:01:253 916 1594 DnldMgr
Download manager restoring 0 downloads
2014-05-07 13:06:01:253 916 1410 Report
* OS Product Type = 0x0000000A
2014-05-07 13:06:01:260 916 1594 AU
########### AU: Initializing Automatic Updates ###########
2014-05-07 13:06:01:261 916 1594 AU
# WSUS server: http://172.16.74.28
2014-05-07 13:06:01:261 916 1594 AU
# Detection frequency: 1
2014-05-07 13:06:01:261 916 1594 AU
# Approval type: Pre-install notify (Policy)
2014-05-07 13:06:01:261 916 1594 AU
# Auto-install minor updates: Yes (Policy)
2014-05-07 13:06:01:261 916 1594 AU
# Will interact with non-admins (Non-admins are elevated (Policy))
2014-05-07 13:06:01:384 916 1410 Report
* Computer Brand = VMware, Inc.
2014-05-07 13:06:01:384 916 1410 Report
* Computer Model = VMware Virtual Platform
2014-05-07 13:06:01:390 916 1410 Report
* Bios Revision = 6.00
2014-05-07 13:06:01:390 916 1410 Report
* Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-05-07 13:06:01:390 916 1410 Report
* Bios Release Date = 2012-07-09T00:00:00
2014-05-07 13:06:01:390 916 1410 Report
* Locale ID = 1033
2014-05-07 13:06:01:392 916 1594 AU
Successfully wrote event for AU health state:0
2014-05-07 13:06:01:392 916 1594 AU
Initializing featured updates
2014-05-07 13:06:01:392 916 1594 AU
Found 0 cached featured updates
2014-05-07 13:06:01:392 916 1594 AU
Successfully wrote event for AU health state:0
2014-05-07 13:06:01:395 916 1714 Report
WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{1EDE8AC5-7759-45EC-9747-C62989CBAEF4}.bin for reading with hr = 80070002.
2014-05-07 13:06:01:396 916 1714 Report
WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{EEE2278A-AE78-4886-96CF-5C5946BA8699}.bin for reading with hr = 80070002.
2014-05-07 13:06:01:396 916 1594 AU
Successfully wrote event for AU health state:0
2014-05-07 13:06:01:396 916 1594 AU
AU finished delayed initialization
2014-05-07 13:06:01:397 916 1594 AU
Triggering AU detection through DetectNow API
2014-05-07 13:06:01:397 916 1594 AU
Triggering Online detection (non-interactive)
2014-05-07 13:06:01:397 916 1410 AU
2014-05-07 13:06:01:397 916 1410 AU
## START ## AU: Search for updates
2014-05-07 13:06:01:397 916 1410 AU
2014-05-07 13:06:01:399 916 1410 AU
<<## SUBMITTED ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07 13:06:01:399 916 1714 Agent
2014-05-07 13:06:01:399 916 1714 Agent
** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 13:06:01:399 916 1714 Agent
2014-05-07 13:06:01:399 916 1714 Agent
* Online = Yes; Ignore download priority = No
2014-05-07 13:06:01:399 916 1714 Agent
* Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation'
and RebootRequired=1"
2014-05-07 13:06:01:399 916 1714 Agent
* ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-05-07 13:06:01:399 916 1714 Agent
* Search Scope = {Machine}
2014-05-07 13:06:01:399 916 1714 Setup
Checking for agent SelfUpdate
2014-05-07 13:06:01:400 916 1714 Setup
Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 13:07:03:952 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:07:03:952 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:07:22:828 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:07:22:828 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:09:02:845 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:09:02:845 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:10:02:451 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:10:02:451 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:10:02:451 916 1714 Misc
WARNING: DownloadFileInternal failed for http://172.16.74.28/selfupdate/wuident.cab: error 0x801901f8
2014-05-07 13:10:02:452 916 1714 Setup
WARNING: SelfUpdate check failed to download package information, error = 0x80244023
2014-05-07 13:10:02:452 916 1714 Setup
FATAL: SelfUpdate check failed, err = 0x80244023
2014-05-07 13:10:02:452 916 1714 Agent
* WARNING: Skipping scan, self-update check returned 0x80244023
2014-05-07 13:10:02:452 916 1714 Agent
* WARNING: Exit code = 0x80244023
2014-05-07 13:10:02:452 916 1714 Agent
2014-05-07 13:10:02:452 916 1714 Agent
** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 13:10:02:452 916 1714 Agent
2014-05-07 13:10:02:452 916 1714 Agent
WARNING: WU client failed Searching for update with error 0x80244023
2014-05-07 13:10:02:453 916 ae8 AU
>>## RESUMED ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07 13:10:02:453 916 ae8 AU
# WARNING: Search callback failed, result = 0x80244023
2014-05-07 13:10:02:453 916 ae8 AU
# WARNING: Failed to find updates with error code 80244023
2014-05-07 13:10:02:453 916 ae8 AU
2014-05-07 13:10:02:454 916 ae8 AU
## END ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07 13:10:02:454 916 ae8 AU
2014-05-07 13:10:02:457 916 ae8 AU
Successfully wrote event for AU health state:0
2014-05-07 13:10:02:457 916 ae8 AU
AU setting next detection timeout to 2014-05-07 06:08:08
2014-05-07 13:10:02:457 916 ae8 AU
Successfully wrote event for AU health state:0
2014-05-07 13:10:02:458 916 ae8 AU
Successfully wrote event for AU health state:0
2014-05-07 13:10:02:463 916 1714 Report
CWERReporter finishing event handling. (00000000)
2014-05-07 13:10:07:452 916 1714 Report
REPORT EVENT: {E1B169E2-C0FC-4D33-A70B-41F76CB362B9} 2014-05-07 13:10:02:452+0800 1 148 101
{D67661EB-2423-451D-BF5D-13199E37DF28} 1 80244023 SelfUpdate
Failure Software Synchronization Windows Update Client failed to detect with error 0x80244023.
2014-05-07 13:10:07:462 916 1714 Report
CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-05-07 13:10:07:463 916 1714 Report
WER Report sent: 7.6.7600.256 0x80244023 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2014-05-07 13:10:07:463 916 1714 Report
CWERReporter finishing event handling. (00000000)
I verified through Nslookup and found WSUS server IP and name does not resolved. However, the download manager window is opening up while accessing
- http://172.16.74.28/selfupdate/wuident.cab from server browser.
Please help.2014-05-07 13:06:01:395 916 1714 Report WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{1EDE8AC5-7759-45EC-9747-C62989CBAEF4}.bin
for reading with hr = 80070002.
This type of error is quite often symptomatic of a corrupted WUA datastore.
2014-05-07 13:07:03:952 916 1714 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with
0x801901f8
The 0x801901F8 is an HTTP 504 -- "request timed out waiting on a gateway".
2014-05-07 13:06:01:253 916 1594 Agent * Target group: (Unassigned Computers)
2014-05-07 13:06:01:261 916 1594 AU # Detection frequency: 1
When using Server-Side Targeting, this value should be at least 2 hours. Based on the above three observations, I recommend the following response:
Verify that the routing table is correct and that requests for 172.16/16 are actually leaving on the correct NIC.
Change the Detection Frequency to at least 2 hours (until you fix the communication issue it might as well be 22 hours!).
Run wuauclt /resetauthorization /detectnow.
If the 0x80070002 error persists, do the following:
Stop the Windows Update service.
Rename %windir%\SoftwareDistribution to SoftwareDistribution.OLD.
Start the Windows Update service.
Run wuauclt /resetauthorization /detectnow and observe the results. If the issue is resolved, copy the ReportingEvents.log from SoftwareDistribution.OLD back to the new SoftwareDistribution.
If the issue is not resolved, post that detection event for further analysis.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
NLS initialization failed error
Hi,
I am running on XP and have already installed APEX 3.0.1 on the XE db. I have since installed the Oracle HTTP Server from the 10gR2 companion CD and at the point of the Configuration Assistant secion of the installation as it tries to start the HTTP Server the NLS initialization error appears.
I have listed the output from the cfgtoollogs directory below :
INFO: oracle.apache.standalone:About to execute plug-in Starting HTTP Server
INFO: oracle.apache.standalone:The plug-in Starting HTTP Server is running
INFO: oracle.apache.standalone:CmdExec: D:\oracle\product\10.2.0\ohs/opmn/bin/opmnctlw.exe
arg: startall
INFO: oracle.apache.standalone:ExitCode=2
Stdout=opmnctl: starting opmn and all managed processes...
Stderr=main: NLS initialization failed!!
main: NLS initialization failed!!
pingwait exits with 1228520
I have noticed this error in Metalink and within the forum but the solutions mentioned don't seem to solve this problem.
Any help would be appreciated.
Kind Regards,
TomHi,
This matter has now been resolved as follows :
Hi Alistair,
Very many thanks for your post as the error was beginning to drive me up the wall.
I have since removed the oraociei10.dll file from the older HOME directory (previous Client installation) that existed on my system and the matter has been resolved i.e. I can now start the HTTP server.
Thanks again for taking the time to supply the information.
Kind Regards,
Tom -
Regarding MI Client SP16 sync error on Intermec device
Hi,
I have installed Creme 3.27 & MI Client Sp16 Patch 0 on the handheld device ( Intermec IS 730)
When I synchronize on the handheld, I get the following error
Error:cannot connect (java.io.FileNotFoundException :
I have installed the MI Client with Sp16 Patch 03 on a desktop that works with WAS without any error.
The handheld device & desktop both use the same user credentials.
The handheld is connected to the desktop with an USB cable.
Please let me know if you are aware of a solution
Thanks
Raj
Message was edited by: Raja VariHi Thomas,
Please find the additional info below
Device : Intermec 730 ISafe mobile computer
OS Version : Microsoft Pocket PC Version 4.20.0 ( Build 14053)
Processor : ARM PXA255
Memory : 58.80 MB
The trace info is as follows
[20030321 05:39:31:921] I [MI/API/Logging ] ***** LOG / TRACE SWITCHED ON
[20030321 05:39:31:921] I [MI/API/Logging ] ***** Mobile Engine version: MI 25 SP 16 Patch 00 Build 200602132039
[20030321 05:39:31:921] I [MI/API/Logging ] ***** Current timezone: EST
[20030321 05:39:34:774] W [MI/Core ] The SSL support feature is not available.
java.lang.NoClassDefFoundError: com/sun/net/ssl/internal/ssl/Provider
at com.sap.ip.me.core.SslSupportConfiguration.initialize()
at com.sap.ip.me.core.SslSupportConfiguration.<init>()
at java.lang.Class.newInstance()
at com.sap.ip.me.core.SecurityManager.initializeSslSupport()
at com.sap.ip.me.core.SecurityManager.<init>()
at com.sap.ip.me.core.SecurityManager.<clinit>()
at com.sap.ip.me.core.UserImpl.<init>()
at com.sap.ip.me.core.UserManagerImpl.<init>()
at com.sap.ip.me.core.UserManagerImpl.<clinit>()
at com.sap.ip.me.core.FrameworkInitializer.initSingletons()
at com.sap.ip.me.core.FrameworkInitializer.initializeFramework()
at com.sap.ip.me.core.FrameworkInitializer.main()
at com.sap.ip.me.core.Startup.main()
[20030321 05:39:40:000] E [MI/API/Services ] MultiObjectFileStorage: Error in data read access to mapping file /MI/data/LastSuccessfulSync/datreg.obj - Generating initial mapping (root cause: /MI/data/LastSuccessfulSync/datreg.obj [java.io.FileNotFoundException])
[20030321 05:41:55:690] W [MI/Sync ] Cannot connect to gateway
com.sap.ip.me.api.services.HttpConnectionException
at com.sap.ip.me.api.services.IOUtils.isConnectable()
at com.sap.ip.me.sync.SyncManagerImpl.doConnectionTest()
at com.sap.ip.me.sync.SyncManagerImpl.synchronizeWithBackend()
at com.sap.ip.me.sync.SyncManagerImpl.synchronizeWithBackend()
at com.sap.ip.me.api.sync.SyncManager.synchronizeWithBackend()
at com.sap.ip.me.apps.jsp.Home$SyncRunnable.run()
at java.lang.Thread.run()
[20030321 05:42:20:722] W [MI/Sync ] Cannot connect to gateway
com.sap.ip.me.api.services.HttpConnectionException: cannot connect (java.io.FileNotFoundException: http://aix15k2:54100/meSync/servlet/meSync?sysid=mid&client=071&~language=en&ACKNOWLEDGE=&)
at com.sap.ip.me.api.services.IOUtils.isConnectable()
at com.sap.ip.me.sync.SyncManagerImpl.doConnectionTest()
at com.sap.ip.me.sync.SyncManagerImpl.synchronizeWithBackend()
at com.sap.ip.me.sync.SyncManagerImpl.synchronizeWithBackend()
at com.sap.ip.me.api.sync.SyncManager.synchronizeWithBackend()
at com.sap.ip.me.apps.jsp.Home$SyncRunnable.run()
at java.lang.Thread.run()
[20061013 13:53:17:530] W [MI/Sync ] Cannot connect to gateway
com.sap.ip.me.api.services.HttpConnectionException: cannot connect (java.io.FileNotFoundException: http://aix15k2:54100/meSync/servlet/meSync?sysid=mid&client=071&~language=en&ACKNOWLEDGE=&)
at com.sap.ip.me.api.services.IOUtils.isConnectable()
at com.sap.ip.me.sync.SyncManagerImpl.doConnectionTest()
at com.sap.ip.me.sync.SyncManagerImpl.synchronizeWithBackend()
at com.sap.ip.me.sync.SyncManagerImpl.synchronizeWithBackend()
at com.sap.ip.me.api.sync.SyncManager.synchronizeWithBackend()
at com.sap.ip.me.apps.jsp.Home$SyncRunnable.run()
at java.lang.Thread.run()
Thanks
Raja -
My client is receiving error messages
I redesigned & updated my client's site with DW Version
9.0 Build 3481. My client is editing thw site with Contribute 2. 2
problems have arisen preventing him from editing the site"
1.) When he copies and pasted into a new page he receives the
following error (from client):
While executing DWMenu_Edit_Paste command in ccmenus.xml, the
following JavaScript error(s) occurred:
At line 77 of file "C:\Program Files\Macromedia\Contribute
2\Configuration\Shared\Scripts\event.js:
exception throw in native function
This error message gives me three options OK, Cancel and the
red X in the upper right hand corner of the error massage box. When
I click any of these three options I end up back where I was before
I keyed in the Paste
Command.
2.) I had the idea that I would just try typing in the data
rather than pasting it. So I created a new page, COUNSELING, (which
seem to work okay) and typed in the page title and a few words in
the text area. When
I went to publish, I got this error message:
When executing Edit_Action_Publish command in the
cctoolbars.xml, the following JavaScript error(s) occurred:
exception throw in native function.
When I click out of the error massage I immediately get
another message:
Contribute has encountered a problem and needs to close. We
are sorry for
the incontinence.
If you were in the middle of something the info you were
working on might be lost.
When I click the only option on the message, CLOSE,
Contribute closes. I then reopened Contribute and everything
entered was lost, both the creation of the new page and the info I
had type in.
Any ideas?The only way I can think of now would be deactivating iMassage in Settings/Messages. The downside is, that this will disable iMassage for sending as well.
Or send those devices the message back and ask them to stop it. If they don't, ask the provider to block the numbers. -
App-V 5.0 SP1 Client package publishing error 0x4C401C0C-0x80070057
Hi there
I need some help with some specific error which others also seem to have. But because there are different threads with partial different error codes and scenarios, i decided to create a new thread for my problem with exact environment specifications. So
someone can maybe help me better this way.
I've sequenced 15 packages on App-V 5.0 (SP1) so far and 3 of them have this specific error with code 0x4C401C0C-0x80070057:
Package {package-GUID} version
{version-GUID} failed configuration in folder 'C:\ProgramData\App-V\{package-GUID}\{version-GUID}' with error 0x4C401C0C-0x80070057.
The 3 packages are GIMP, XMind (some Mindmap Software) and Audacity (an audio editing software). But i don't think it's a problem with the software itself...
My environment is:
App-V Streaming Server -> Windows Server 2012 with SQL 2012 Standard (most packages streaming flawless, so i don't think the error is to search in the server)
App-V Sequencers -> Tried to sequence the package (especially XMind was the one i took for further testing) on Windows 7 Enterprise with SP1 (x86) one with all the local packages installed which are on a normal client like (Java, Flashplayer, Office
etc.) and another Win7 Ent SP1 x86 without any additional software installed. Also i set up a fresh Win8 Enterprise x64 and tried to sequence the package there. Of course the Sequencer is also 5.0 SP1!
Sequencing always goes without any errors (only warnings about excluded files or not supported shell extensions, but thats normal i believe... i also removed the unsupported shell extensions from virtual registry, but that didn't help)
Client is (always 5.0 SP1) installed on Win8 Enterprise x64 or Win7 Enterprise x64, error occurs on both OS.
The errors i've got in the event viewer:
App-V -> Client -> Admin Log says as mentioned before: Package {73069ba1-3d65-4b8e-a6e9-09d5cef967c9} version {f86e76b2-78c7-490c-a42b-e53fc2bfb6fb} failed configuration in folder 'C:\ProgramData\App-V\73069BA1-3D65-4B8E-A6E9-09D5CEF967C9\F86E76B2-78C7-490C-A42B-E53FC2BFB6FB'
with error 0x4C401C0C-0x80070057.
App-V -> Streaming-Manager -> Debug:
Information: Microsoft AppV Streaming Manager Session created for URI \\apvserveradress\AppV_Content$\Diverse\XMind_3_GE_x64\XMind_3_GE_x64.appv and user SID S-1-5-21-933032516-4060937889-my-user.
(Some values anonymized ;))
Information: Microsoft AppV Streaming Manager Stage-Package initiated.
ERROR: Failed to retrieve package source root opt out setting from machine policy for package version {f86e76b2-78c7-490c-a42b-e53fc2bfb6fb} with status 4490208696731238406. (this error appears with or without package source
root set with GPO to %programdata%\App-V)
Information: Microsoft AppV Streaming Manager Session deleted for URI \\apvserveradress\AppV_Content$\Diverse\XMind_3_GE_x64\XMind_3_GE_x64.appv and user SID S-1-5-21-933032516-4060937889-my-user.
ERROR: Microsoft AppV Streaming Manager Stage-Package failed with status wrong parameter., Package Version {f86e76b2-78c7-490c-a42b-e53fc2bfb6fb}.
Hmm i didn't activated all detailed logs... i did now and try a reboot... but it's really strange because i didn't do something special while sequencing this packages or the one's which are working without any errors... so i also didn't get the wrong parameter
message, i compared the userconfig and the deploymentconfig files with one which didn't produce any errors and can't see any differences which could be a wrong parameter...
Help please... if someone thinks there should be more errors somewhere, let me know... i - as i said - activated now all detailed logs unter Microsoft -> App-V in the event viewer...
i don't get the problem myself, sorry guys... :(
greets
StephanHello Stephan,
I too am experiencing the same issue.
Rather than starting with the full App-V infrastructure though I simply installed the sequencer (App-V 5.0 SP1) on a clean VM running Windows 7 Enterprise 32-bit (including SP1 and fully patched). I then sequenced one of the simplest apps we use (Workrave)
and tried to 'install' it as a stand-alone app onto another clean VM again running Windows 7 Enterprise 32-bit (including SP1 and fully patched). I believed that this would be the cleanest solution and would allow me to 'test' the applications before
going to the trouble of configuring the full infrastructure.
Running the .msi file gave me the same error as you: (ref. your post Tuesday, May 07, 2013 10:26 AM).
I got the same error when trying to install via PowerShell:
PS C:\Windows\system32> Set-ExecutionPolicy Unrestricted -Scope CurrentUser
PS C:\Windows\system32> Import-Module Appvclient
PS C:\Windows\system32> Add-AppvClientPackage -Path 'C:\AppTest_1.10.0_x86\AppTest_1.10.0_x86.appv'
Add-AppvClientPackage : Application Virtualization Service failed to complete requested operation.
Operation attempted: Configure AppV Package.
AppV Error Code: 0C80070057.
Error module: Streaming Manager. Internal error detail: 4C401C0C80070057.
Please consult AppV Client Event Log for more details.
At line:1 char:1
+ Add-AppvClientPackage -Path 'C:\AppTest_1.10.0_x86\AppTest_1.10.0_x86.appv
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidResult: (:) [Add-AppvClientPackage], ClientException
+ FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientPowerShell.AddAppvPackage
I have re-built both the sequencer and client VMs from scratch and tried it all again. No luck. I then tried using 64-bit versions of Windows but encountered the same issue.
I too have enabled the Analytic and Debug Logs for AppV in Event Manager and see
some of same error events as you:
\AppV\Client\Admin
\AppV\Client-Orchestration\Debug
\AppV\Client\Streaming-Manager\Debug
I do not however have anything in:
\AppV\Client-RegistryNotification
I suppose it might just be the application I chose to sequence but it is rather putting me off trying anything more complicated...
Please do let us know if you get to the bottom of it...
Maybe you are looking for
-
Very slow wine game/nouveau driver issue
Hello everyone, I'm trying to play a game (Civ 4) using wine. However, it was extremely laggy, and since it runs well on Windows (I have dualboot) plus it's not a very recent game and my laptop is reasonnably well-equipped, I thought it should work w
-
I have tried adjusting images in VC3 with Windows XP and have had no problem. However, after testing this unsuccessfully in WIndows 7 with two different brands of computers, I am almost positive this is a bug with the new operating system. Adjusting
-
Hello experts , I am trying to access the short text of Status in E070 , as i can see some short text when i F4 on the feild . I want to know i which table this short text is stored . Example : - Goto E070 table - F8 - In the status feild we may
-
hello, My flash gallery does not fully load in my dreamweaver site. It is an xml flash gallery, and it work perfecly on my local PC. I have the same folder structure on the server as i have on my PC, yet it wont get passed the preloader - the preload
-
How do i permanently delete photos from icloud to free up storage?
My storage says that my phone is using 3.9 GB of the 5 GB available for the photos on my phone. I have deleted 230 of the 450 pictures from my camera roll and about 100 of the 200 on Photostream, however, iCloud still says I'm still using 3.9 GB. How