Clients losing Connections yellow exclamation mark still associated
We are having intermittent issue where clients just lose connectivity, they stay associated to the access point but get a yellow exclamation mark.
I have followed the steps in these post but still the issue persists. https://supportforums.cisco.com/thread/2194495
https://supportforums.cisco.com/thread/2002533
WPA2 802.1 x authentication.
We were getting this error before I made the changes
(Cisco Controller) >*dot1xMsgTask: Jan 31 11:58:25.140: 08:11:96:80:33:e0 Key exchange done, data packets from mobile 08:11:96:80:33:e0 should be forwarded shortly
*dot1xMsgTask: Jan 31 11:58:25.140: 08:11:96:80:33:e0 Sending EAPOL-Key Message to mobile 08:11:96:80:33:e0
state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
*dot1xMsgTask: Jan 31 11:58:25.141: 08:11:96:80:33:e0 Updated broadcast key sent to mobile 08:11:96:80:33:E0
*Dot1x_NW_MsgTask_0: Jan 31 11:58:25.145: 08:11:96:80:33:e0 Received EAPOL-Key from mobile 08:11:96:80:33:e0
*Dot1x_NW_MsgTask_0: Jan 31 11:58:25.145: 08:11:96:80:33:e0 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 08:11:96:80:33:e0
*Dot1x_NW_MsgTask_0: Jan 31 11:58:25.145: 08:11:96:80:33:e0 Received EAPOL-key in REKEYNEGOTIATING state (message 6) from mobile 08:11:96:80:33:e0
After I made the changes there are no errors in the debug just clients stops working with yellow exclamation mark, cannot reach default gateway.
We also recently enabled Rogue policies auto contain rogue on wire and Using our SSID.
WLC4402 7.0.235.0
We want to upgrade the WLC software but want to make sure it’s the issue.
Okay... well at least its not the WLC code or AP tht is an issue. RLDP whould only be used on monitor mode access points, When used with access points that serve clients, the AP when detecting a rogue, will drop all associated clients. The AP's will do rogue detection anyways, so no need enable RLDP.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Similar Messages
-
missing masters in aperture , getting an yellow exclamation mark ,
Q: Is there a way to place an image at 100% without having to do that extra resizing step?
I think here you want your images to fit in the full page size frame automatically. For this you can try the follwoing steps:
1. Create a new doc
2. Goto Object menu and choose Frame fitting options
3. Select Autofit and from Fitting drowdown, select "Fit content to frame". Refer the screenshot below:
After this you images should automatically fit in the entire page placeholder frames. Please let me know if this does not work or if the problem you are facing is different and I did not understand your problem correctly.
Regards,
Pooja -
Hello, I have problem with access to App Catalog, when i try to access to App Catalog it's give error "The action could not be completed. Try again later" with yellow exclamation mark. I tried to make partial erase, I made full erase, I made Secure erase, but all these steps not helps.
I renew my firmware with latest webOSDoctor, but still nothing. Then I changed my Palm Profile, I create new one, but still NOT WORKING!
I checked all connections 3G and Wi-Fi, everything is ok, but App Catalog still not working.
So, I contacted with Palm Support, I told about this issue and I send them Quick Log and Log
with Description to [email protected]
Reference number for chat: Chat session ID number 89786521
Do you have any solution?
Best regards
Rufat Jalilov
Post relates to: Pre 2 p102una (Unlocked NA)Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
I really appreciate the attention rendered by the support services, I just need that everything works fine.
I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
So, I will wait for a few days, will see what's happening.
Best regards
Rufat Jalilov -
Wireless network adapter - yellow exclamation mark triangle
Hello, My wireless internet button is orange and isn't and doesn't change colour when I press it so wifi isn't working. In network adapters, my wireless adapter shows up and is: Ralink RT5390R 802.11bgn Wi-Fi Adapter It has a yellow exclamation mark triangle on it. It says it is enabled, but in device status it says: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (code 39){Unable to load device driver}%hs device driver could not be loaded.Error status was 0x%x When I try to update driver software, it says the best driver software is already installed and up to date. Please help me get my wifi back - I have a HP pavilion g6 2210sa, Product number C6S45EA#ABU and running Windows 8. Best wishes and thank you in advance.
I have HP 15-r264dx windows 8.1 64 bit laptop with Realtek wireless adapter RTL8188ee 802.11 bgn. There is an exclamation mark with the wireless signal which is white. Sometimes my wireless cannot connect. My wired LAN is OK. I unchecked the option to make adapters power off to save power I think in power management. I have a 2015 driver for the wireless adapter. HP diagnosis would reset the adapter and everything is fine but still the white exclamation mark. I think a setting is not correct, any ideas what it may be and how do I go to it? I am connected with the wireless lan right now to my Verizon DSL router and it is unsecured.
-
Yellow exclamation mark in references: What does it mean
In my c# project, i have references to c++/cli and native c++ projects under "references". (i need to have them there, in order to be able to use msbuild on my solution from the command line.). all of these projects have yellow exclamation marks overlayed
to the "reference" symbol. (vs 2010). i can't find any explanation what these symbols are supposed to tell me.
any ideas ?
WM_THX
-thomas woelfer
http://www.die.de/blogHi Thomas,
I think this behavior is a warning to user that the native dll referenced by C# project is not supported there.
And I cannot say if it is by design or just a bug, would you mind sharing the connect link here, so that others could see and vote on it?
In addition, for msbuild issue, you may try MSbuild forum for better suggestions/workaround.
Thanks for understanding.
Figo Fei
MSDN Subscriber Support
in Forum
If you have any feedback on our support, please contact
[email protected]
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Yesterday when opening pictures in Camera raw a yellow exclamation mark started appearing on the upper right corner. This doesn't let me use Adjustment brush as the yellow exclamation mark appears every time I pick the brush and start using it on the picture. It's been like that for two days now. Any ideas?
I did try doing the ‘Purge Cache' now, but it's still the same.
With Ctrl +K you get the normal cache for preview and thumbs and that is not the same as the Camera Raw Cache.
Under the menu Bridge you will find just above the bridge Preferences the Camera Raw Preferences (at least, on a Mac) and in this window you find the option to clear the Camera Raw Cache, did you try that one? -
IMovie Yellow Exclamation Mark - What's missing?
I have movies that I updated from iMovie 09. When loading the Project, in the Timeline, I see the title in the middle with a yellow exclamation mark. I'm not sure why this is there. I initially had music missing with red and some files missing for some Projects, but I fixed everything. It still shows the yellow exclamation mark. When I hover over it, nothing happens. I have an image of what it looks like. What am I missing from the Project?
Hi,
@Edwin
thanks for pointing me in the right direction Edwin. The problem was that I changed the name of the method after the def-file for the method has been created the first time. JDEV did not update the contents of this file (and/or the DataBindings.cpx). So the method name was wrong and I got errors running my test app.
I removed the task flow completely and set up a new one which is working as expected.
@Juan
for me it looked like I couldn't call the method defined as default action. I got errors (which I didn't read carefully) stating the the method was missing (something like ...#[bindings....} not found). My conclusion was that the exclamation mark in the diagram stating that bindings is unknown was the cause.
The real cause of the problem I described above.
Thanks
Timo -
Ibook suddenly marks photos with yellow exclamation mark
Hi,
I have created several photo albums and had them published. I have always chosen my photos carefully to avoid the yellow exclamation mark. One of my projects was started several months ago and left untouched for a long time. When I went back to the project more than 50% of the photos were now marked with exclamation marks. Then I looked at books that I have finished and had published, and they too have exclamation marks on some photos. I went to a local Apple Store and the "geniuses" were stumped. Any ideas on what may have caused this spontaneous mutation...and how I can fix it?
Thanks
PS Changing the size of the book project does not seem to make a differenceHi Maliha,
I followed your instruction to execute the exe file under C:\Drivers. After that, I rebooted the system and no more error pop up for the missing audio device. I checked the Device Manager and the Audio Device on High Definition Audion Bus disappeared and the SoundMax was shown. But again, still no sound. I clicked on TroubleShooting on that SoundMax and followed that instruction. I found out the default Sound device was erroneously pointed to BlueTooth. I made the change to SoundMax and voila ... the sweet ding sound came back.
That was a wonderful feeling to be able to fix this nagging problem that my company HelpDesk could not help me. All thank to this forum and particular Maliha. Again, my appreciation to the valuable help. -
T61 - No sound - Audio Device on High Definition Audio Bus with yellow exclamation mark
Hi,
I am not sure when it started but suddenly my T61 has no audio/sound. I checked the Device Manager and did see the Audio Device on High Definition Audio Bus with yellow (big) question mark with yellow exclamation mark superimposed on it. I downloaded, from Lenovo Support site, the 7ka114ww.exe , hoping to fix it by un-install that device, reboot it, and re-install using the download exe file, but to no avail.
Any suggestion or help is really appreciated. Many thanks in advance
PS. I also see the Base System Device pop up after a reboot and ask to be installed ?!? That pop-up had been there for a while before the audio/sound was lost.
Solved!
Go to Solution.Hi Maliha,
I followed your instruction to execute the exe file under C:\Drivers. After that, I rebooted the system and no more error pop up for the missing audio device. I checked the Device Manager and the Audio Device on High Definition Audion Bus disappeared and the SoundMax was shown. But again, still no sound. I clicked on TroubleShooting on that SoundMax and followed that instruction. I found out the default Sound device was erroneously pointed to BlueTooth. I made the change to SoundMax and voila ... the sweet ding sound came back.
That was a wonderful feeling to be able to fix this nagging problem that my company HelpDesk could not help me. All thank to this forum and particular Maliha. Again, my appreciation to the valuable help. -
LAN on SysTray has a Yellow Exclamation Mark
So I read through most of the articles on this forum about this topic with no luck...tried installing latest drivers, registry settings, oh and my favorite reboot (really), but seriously this is an issue dating backing to Vista with no "REAL"
solution..Microsoft get off your butts and fix the issue...even though I have connectivity it says no Internet Access...which is false, because I do. The problem is it affects our internal SharePoint sites...all the computers with out the issue work fine and
all the ones that do fail...so I am looking for a solution to eliminating the random exclamation mark once and for all...we use the same image on thousands of machine and the issue is random...any thoughts or want to share in the frustration??
ChrisHi,
More information about Yellow Exclamation Mark can be found in this link below:
http://blogs.technet.com/b/networking/archive/2012/12/20/the-network-connection-status-icon.aspx
And the second link explains how system determines the network locaion, if the network profile is incorrectly identified to a public profile, then it might cause problems to access the internal sites such as SharePoint sites.
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
Meanhwile, if you have multiple network adapters\profiles in the system, then I suggest remove unused one if possible, test this issue again.
Temporarily turn off firewall and anti-vius software, test this issue.
Yolanda Zhu
TechNet Community Support -
ITunesHelper Login Item - Yellow Exclamation Mark
Hey people!
I was checking my login items and saw that next to the iTunesHelper there was a yellow exclamation mark... It said that "this item could not be found"... I upgraded my OS to Mountain Lion and it is a bit slow.. You think this could be a contributing factor?It's old. Remove it.
If you go into you iTunes settings, the checkbox to have it open iTunes when you attach a phone or ipad is what causes it to be placed in the login items.
Not likely. -
Yellow exclamation mark--what does it mean?
Hello Aperture experts: I've just started using Aperture and am designing a book. Certain images I've chosen are posted on the layout page with a yellow exclamation mark in the corner. I get it that Aperture is trying to warn me about something, but what? Does anyone know? Thanks.
What are the pixel dimensions of the photo and what is the size you are printing it?
Depending on your personal quality expectations you may find that if you are close you will be ok - i often print photos with the warning knowing that it is my risk
Basically you should have at least 180 dpi to avoid a warning - so a full page 8.5 x 11 print requires a photos of 1530 x 1980 or larger - and remember that if you zoom the photo that reduces the dpi
LN -
Clients losing connection on 871W...kinda
I have a problem with myself a few other clients randomly disconnecting from my 871W. It appears that I am still associated but Windows 7 shows "Limited Access". I appear to be assosciated to the AP and I still have my ip address but I can't ping the 192.168.1.1 gateway (871W). I have also set my power plan to allow for Maximum Performance which I thought disabled PSP but the log is still showing errors.
As a final note, after I reconnected by ip address (192.168.1.107) doesn't show up in "sh ip dhcp bindings" but I'm working.
To correct the situation, I have to disconnect and the reconnect to the AP and then I am good for another day or close to it. Any ideas what is going on and w how to fix it??? Below are the log errors, config and a sh ver. Any help would be very much appreciated.
802.11 Client Stations on Dot11Radio0:
SSID [madness] :
MAC Address IP address Device Name Parent State
9cb7.0d7a.11e9 192.168.1.107 - - self Assoc
ecf0.0e00.23e8 192.168.1.25 - - self Assoc
Others: (not related to any ssid)
871W#
*Feb 6 11:41:45.707: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 in psp
*Feb 6 11:41:45.707: DOT11 EVENT: Client PSP mode on
*Feb 6 11:41:45.775: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 out psp
*Feb 6 11:41:45.775: DOT11 EVENT: Client PSP mode off
*Feb 6 11:41:46.003: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 in psp
*Feb 6 11:41:46.003: DOT11 EVENT: Client PSP mode on
*Feb 6 11:41:46.071: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 out psp
*Feb 6 11:41:46.071: DOT11 EVENT: Client PSP mode off
*Feb 6 11:41:46.267: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 in psp
*Feb 6 11:41:46.271: DOT11 EVENT: Client PSP mode on
*Feb 6 11:41:46.335: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 out psp
*Feb 6 11:41:46.335: DOT11 EVENT: Client PSP mode off
*Feb 6 11:41:46.535: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 in psp
*Feb 6 11:41:46.535: DOT11 EVENT: Client PSP mode on
*Feb 6 11:41:46.599: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 out psp
*Feb 6 11:41:46.603: DOT11 EVENT: Client PSP mode off
*Feb 6 11:41:46.799: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 in psp
*Feb 6 11:41:46.799: DOT11 EVENT: Client PSP mode on
*Feb 6 11:41:46.867: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 out psp
*Feb 6 11:41:46.867: DOT11 EVENT: Client PSP mode off
*Feb 6 11:41:47.063: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 in psp
*Feb 6 11:41:47.063: DOT11 EVENT: Client PSP mode on
*Feb 6 11:41:47.131: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 out psp
*Feb 6 11:41:47.131: DOT11 EVENT: Client PSP mode off
*Feb 6 11:41:47.42
---- Had to manually disconnect here
Feb 6 11:42:53.563: DOT11 EVENT: Client PSP mode off
*Feb 6 11:42:55.743: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 9cb7.0d7a.11e9 Reason: Disassociated because sending station is leaving (or has left) BSS
---- reassociate
*Feb 6 11:42:55.743: DOT11 EVENT: Set client session key
*Feb 6 11:42:55.743: DOT11 EVENT: Free client
*Feb 6 11:42:55.747: DOT11 EVENT: Set client session key
*Feb 6 11:42:55.747: DOT11 EVENT: Free client
*Feb 6 11:43:26.423: disc_client_add: client 9cb7.0d7a.11e9 txrate is 6C, ratemask is 1EFF
*Feb 6 11:43:26.431: DOT11 EVENT: Freeing packets with previous MIC
*Feb 6 11:43:26.431: DOT11 EVENT: Set client session key
*Feb 6 11:43:26.435: disc_rx_done: after extiv set eapol if_input back to hwidb->firstsw
*Feb 6 11:43:26.435: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 9cb7.0d7a.11e9 Associated KEY_MGMT[WPA PSK]
871W#
871W#
871W#sh run
Building configuration...
Current configuration : 4348 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname 871W
boot-start-marker
boot-end-marker
logging buffered 4096 debugging
enable secret 5 $1$3.
enable password cisco
username xxx privilege 15 secret 5
username xxx privilege 15 password
username xxx privilege 15 password
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
ip subnet-zero
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.20
ip dhcp pool VLAN1
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
lease 4
ip dhcp pool STATIC
host 192.168.1.51 255.255.255.0
client-identifier 017c.1e52.7e64.02
ip inspect name HOMEFW tcp
ip inspect name HOMEFW udp
ip inspect name HOMEFW icmp
no ip domain lookup
ip domain name xxx.com
ip ssh rsa keypair-name xxx
ip ssh version 2
no ftp-server write-enable
bridge irb
interface FastEthernet0
no ip address
no cdp enable
spanning-tree portfast
interface FastEthernet1
no ip address
no cdp enable
spanning-tree portfast
interface FastEthernet2
no ip address
no cdp enable
spanning-tree portfast
interface FastEthernet3
no ip address
no cdp enable
spanning-tree portfast
interface FastEthernet4
ip address dhcp client-id FastEthernet4
ip nat outside
ip virtual-reassembly
ip tcp adjust-mss 1452
duplex auto
speed auto
no cdp enable
interface Dot11Radio0
no ip address
encryption vlan 1 mode ciphers tkip
ssid madness
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 Techdata09
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2462
no dot11 extension aironet
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.1
encapsulation dot1Q 1 native
ip nat inside
ip virtual-reassembly
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
description Internal NetHome Network
no ip address
ip nat inside
ip virtual-reassembly
bridge-group 1
bridge-group 1 spanning-disabled
interface BVI1
description Bridge to Internal Home Network
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip classless
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 5 life 86400 requests 10000
ip nat inside source list 1 interface FastEthernet4 overload
ip nat inside source static udp 192.168.1.51 3074 interface FastEthernet4 3074
ip nat inside source static udp 192.168.1.51 88 interface FastEthernet4 88
ip nat inside source static tcp 192.168.1.51 3074 interface FastEthernet4 3074
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
snmp-server community xxx RW
no cdp run
control-plane
bridge 1 protocol ieee
bridge 1 route ip
banner login ^C
871W#sh ver
Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI1, RELEASE SOFTWARE (fc1)
Synched to technology version 12.3(10.3)T2
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 22-Apr-05 14:57 by ealyon
ROM: System Bootstrap, Version 12.3(8r)YI, RELEASE SOFTWARE
ROM: Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI1, RELEASE SOFTWARE (fc1)
871W uptime is 1 day, 10 hours, 13 minutes
System returned to ROM by power-on
System image file is "flash:c870-advsecurityk9-mz.123-8.YI1.bin"
interface Dot11Radio0
no ip address
encryption vlan 1 mode ciphers tkip
ssid madness
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 Techdata09
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2462
no dot11 extension aironet
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.1
encapsulation dot1Q 1 native
ip nat inside
ip virtual-reassembly
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
description Internal NetHome Network
no ip address
ip nat inside
ip virtual-reassembly
bridge-group 1
bridge-group 1 spanning-disabled
interface BVI1
description Bridge to Internal Home Network
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
sh ver
871W#sh ver
Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI1, RELEASE SOFTWARE (fc1)
Synched to technology version 12.3(10.3)T2
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 22-Apr-05 14:57 by ealyon
ROM: System Bootstrap, Version 12.3(8r)YI, RELEASE SOFTWARE
ROM: Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI1, RELEASE SOFTWARE (fc1)
871W uptime is 1 day, 10 hours, 13 minutes
System returned to ROM by power-on
System image file is "flash:c870-advsecurityk9-mz.123-8.YI1.bin"
871W#sh ip dhcp binding
Bindings from all pools not associated with VRF:
IP address Client-ID/ Lease expiration Type
Hardware address/
User name
192.168.1.21 0100.2590.75c5.de Feb 09 2007 01:40 AM Automatic
192.168.1.24 742f.685e.473f Feb 09 2007 11:25 AM Automatic
192.168.1.25 01ec.f00e.0023.e8 Feb 10 2007 12:00 AM Automatic
192.168.1.51 017c.1e52.7e64.02 Infinite Manual
192.168.1.104 0100.2315.2731.b0 Feb 10 2007 04:17 AM Automatic
871W#I changed the scope and the respective parts of the config to a 192.168.41.0 scope. Still getting a ton of these errrors though which will most likely cause disconnects. This may be a problem with the nic driver when I'm running on battery. I think it is still trying to use power saving mode.
*Feb 5 01:49:45.267: DOT11 EVENT: Client PSP mode off
*Feb 5 01:49:45.463: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 in psp
*Feb 5 01:49:45.467: DOT11 EVENT: Client PSP mode on
*Feb 5 01:49:45.523: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 out psp
*Feb 5 01:49:45.523: DOT11 EVENT: Client PSP mode off
*Feb 5 01:49:45.723: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 in psp
*Feb 5 01:49:45.723: DOT11 EVENT: Client PSP mode on
*Feb 5 01:49:45.783: mh_driver_frame_rx: clnt 9cb7.0d7a.11e9 out psp
*Feb 5 01:49:45.783: DOT11 EVENT: Client PSP mode off
OH, btw, I need to configure ntp real quick...:)
I'll post and update later or tomorrow if i get disconnected again. -
The Driver "Intel(R) HM76 Express Chipset LPC Controller - 1E59" has a yellow exclamation in Divice Manager. How do I remove it? I just completed clean install of Windows 8 and this driver seems to be for windows 7.
Solved!
Go to Solution.Hello Filipe.
Did you perform the clean installation of the Windows 8 Operating System in your computer? If yes, perform a complete system recovery using the recovery discs to restore your computer to the factory setting in order to troubleshoot the issue.
Follow all the steps mentioned here to perform the system recovery using the recovery discs: http://esupport.sony.com/docs/pc/SVE14A2_series/EN/contents/04/18/14/14.html#l1_recovering from reco...
Note: It is required to take backup of all the data before performing the system recovery, as it erases everything from the computer.
Note: If my post answers your question, please mark it as an "Accepted Solution." -
Green check (or tick) symbols and yellow exclamation marks in the canvas
Dear All,
I've been editing several sequences for some DVD extras over the past month and have returned to my main edit to find every time I stop the edit there's a green check (or tick as we say in the UK) in the canvas window. And sometimes there's a yellow triangle with an exclamation mark. Does anyone know why these are now being displayed and how I can get rid of them?
All help very welcome.
Thanks DamonSomehow you have switched on the Range Checker for excess Luma or Chroma which shows whether your video is within acceptable limits.
To switch it off go to View>Range Check and deselect what you don't want.
Maybe you are looking for
-
My digitizer is not responding however i have loads of iMessages which i can see because the lcd screen is visible but touchscreen is brokenI tried to go onto my ipod touch to look at them but when i looked it had not been signed in to iMessage which
-
Can you assign a custom linescreen to a graphic?
Freehand used to let you assign a custom line screen to an object that would be different from the linescreen for the rest of the document. For instance you could make one object print at 60 lines per inch when the other items printed 150 lpi. I can
-
JSF Components are not displaying :-(
Cheers to All: What I have done is create a simple Java Server Faces project whereby I created a web project and added MyFaces JSF capability in MyEclipse. Next I created some JSFs and markups for the frontend portion of this example. What I am tryin
-
HT3669 driver for lexmark s300 Mac 10.9
Anyone knows if there is a mac 10.9 driver for Lexmark S300? Tks.
-
Problem with sub-screen actions on Cancel button
Hi all, I have a problem with sub-screen. I created a subscreen (screen sequence in MM01/MM02/MM03). When users leave this screen, I call POPUP_TO_CONFIRM to ask if they want to save the data. 1) My goal is: when they choose Cancel, no actions are pe